colorweld 500 architectural finishes - allied metal charts.pdf · colorweld 500 standard, colorweld...

Colorweld® 500 Architectural Finishes

Colorweld® 500

Pure White Bone White Frisco White Oyster White

Castle Grey Pueblo Tan Cadet Grey Classic Green

Konig Blue Brite Red Classic Bronze Deep Black

SERIES ONEStandard Finishes

All Reynobond® panel colors are stocked in 62"-wide coil. Ask about 50"-wide coil availability.

Call for availability of matchingReynolux® panel colors in 0.040" x 48" widths. Other gauges and widths available upon request with minimum quantities and charges.

For other Reynolux panel industry standard “non-stocking” colors, check for availability.

Opaque Finishes: These 2-coat finishes typically consist of a 0.2 mil primer and a 0.8 mil color coat, for a nominal dry film thickness of 1.0 mil.

The Performance You Demand Reynobond® aluminum composite material (ACM) and Reynolux® metal wall panels and flat sheet are protected and colored

with enhanced, high-performance Colorweld® 500 and Colorweld 500XL coatings—allowing for color matching between

products. These paint finishes feature 70% Kynar 500® / Hylar 5000® polyvinylidene fluoride (PVDF) resins with Fluoropolymer

technology, coil coated to ensure the highest color uniformity and quality. They provide excellent flexibility and film

adhesion for forming and offer superior resistance to humidity, impact, salt spray, pollution and abrasion. With a 30-year

finish warranty, Colorweld 500 coatings exhibit outstanding color and gloss retention and improved hardness and

durability, and they are considered the premier architectural coatings for metal.

Buildings stay cleaner with our EcoClean™ coating.

Our innovative EcoClean coating—specially formulated for our Reynobond ACM—keeps buildings cleaner. Thanks to an

advanced titanium dioxide coating, Reynobond ACM with EcoClean coating reacts with nitrous oxides, a primary

component of smog, breaking it down into harmless nitrates. This advanced coating is moisture-activated, only requiring

a light rain or morning dew to wash off grime, keeping your building cleaner and helping to remove pollutants from the air.

It’s an industry first and can be used in conjunction with many of our high-performing Colorweld 500 architectural coatings.

For more information, visit ecoclean.com.

http://ecoclean.com

Pewter Platinum Silversmith Vancouver Copper

Bright Silver Metallic Champagne Metallic Copper Penny Titanium

Anodic Clear Anodic Satin Anodic Bronze

Series Two anodic colors are formulated to closely resemble popular anodized colors used on curtain wall profiles. Certain colors are gauge and width specific.

Mica Finishes: These 2-coat finishes typically consist of a 0.2 mil primer and a 0.8 mil color coat with mica flakes suspended in the finish, for a nominal dry film thickness of 1.0 mil.

Colorweld® 500

Colorweld® 500XL

SERIES TWO Premium Mica Finishes

SERIES THREEPremium Metallic Finishes

Metallic Finishes: These 3-coat finishes typically consist of a 0.2 mil primer, a 0.8 mil color coat and a 0.5 mil clear top coat, for a nominal dry film thickness of 1.5 mils.

Mica and Metallic finishes may vary depending on viewing direction. For color consistency with all finishes, order material from the same batch.

Colors shown are as close to actual colors as possible within the limitations of commercial printing. Alcoa reserves the right to change or withdraw information contained herein without prior notice. Contact Alcoa Architectural Products (AAP) for material samples.

AAP is aware that finish performance and color consistency are of utmost importance to its customers. Painted Reynobond and Reynolux panels are coated in a coil-coating process with the most durable coatings available for the building and construction industry. Coil-coating offers excellent coverage, uniformity and durability in a coating. Yet, due to this process and to the composition of some of our finishes, variances in color can and do occur and are visible to the human eye. Moreover, industry tolerances for the coil-coating help ensure minimal variations within a specific color finish.

Available with the EcoClean™ self-cleaning coating.

Environment-friendly cool-pigment finish.

Colorweld 500 standard, Colorweld 500 mica and Colorweld 500XL metallic coatings exceed AAMA 2605 performance requirements. All coatings are thoroughly tested and backed by the strength and integrity of Alcoa. Alcoa Architectural Products Colorweld 500 and Colorweld 500XL coatings come with a 30-year finish warranty. Please consult your Alcoa Architectural Products representative for product availability and warranty information.

Alcoa Architectural Products

50 Industrial BoulevardEastman, GA 31023-4129

Tel. 800 841 7774

reynobond.com or reynolux.com

©2014 Alcoa Architectural Products. Reynobond®, Reynolux® and Colorweld® are registered trademarks of Alcoa Inc. Kynar 500® is a registered trademark of Arkema Group. Hylar 5000® is a registered trademark of Solvay Solexis.

13AAP2001 June 2014 ver. 2.0 15000

Colorweld 500 (Mica) SRV† SRI†† LRV†††

Pewter 21.6 19 11

Platinum 59.3 70 37

Silversmith 58.1 68 36

Vancouver Copper 47.4 53 17

Anodic Clear 56.2 65 42

Anodic Satin 53.6 61 22

Anodic Bronze 42.9 47 12

Colorweld 500XL (Metallic) SRV† SRI†† LRV†††

Bright Silver Metallic 61 70 40

Champagne Metallic 54.3 61 36

Copper Penny 44.4 48 15

Titanium 44.2 47 31

Irradiative Readings

Colorweld 500 SRV† SRI†† LRV†††

Pure White 69.7 84 76

Bone White 70.2 85 76

Frisco White 71.9 87 70

Oyster White 67.4 81 58

Castle Grey 50.4 57 36

Pueblo Tan 53 61 36

Cadet Grey 35.4 37 34

Classic Green 27.7 27 5

Konig Blue 28.8 27 12

Brite Red 39.4 42 2

Classic Bronze 10 3 3

Deep Black 7.1 0 2

†Solar Reflectivity Value (SRV); ASTM C1549 ††Solar Reflective Index (SRI); ASTM E1980 †††Light Reflectance Value (LRV); ASTM E1477

Paint Finish Performance for Colorweld® Coatings

Property Test Method Opaque Mica Metallic

Specular Gloss (60%) ASTM D523 25-35 25-35 25-35

Pencil Hardness ASTM D3363 F-2H F-2H F-2H

Flexibility (T-bend) ASTM D4145 1-2 T-bend; No pick off 1-2 T-bend; No pick off 1-2 T-bend; No pick off

Reverse Impact ASTM D2794 No cracking or adhesion loss

No cracking or adhesion loss

No cracking or adhesion loss

Salt Spray Resistance 5% Salt Fog @ 95° F

ASTM B117 Passes 4000 hrs Passes 4000 hrs Passes 4000 hrs

Humidity Resistance 100% RH @ 95° F

ASTM D2247 Passes 4000 hrs Passes 4000 hrs Passes 4000 hrs

Color Retention 10 yrs @ 45°, South Florida

ASTM D2244 Max 5 fade Max 5 fade Max 5 fade

Chalk Resistance 10 yrs @ 45°, South Florida

ASTM D4214 Max 8 chalk Max 8 chalk Max 8 chalk

Reynobond® Design Line Nature. Now available in aluminum.

Environmentally sound products that are virtually indistinguishable from their natural counterparts At first glance you’d swear it’s really mahogany. Or granite. Or copper patina. Reynobond® wood,

mineral, granite, patina and stone paint finishes – inspired by Mother Nature – offer a variety

of striking design choices with all the benefits of Reynobond Aluminum Composite Material.

Thanks to the lightweight panel’s remarkable strength and flatness, you can explore an

endless variety of interior and exterior design options. Even the most challenging architectural

concepts are easy to accomplish.

In addition, with Reynobond Face Fastened Solutions you enjoy a perfect combination of

durability, flexibility, simplicity and affordability. The exposed fastener system offers all the

advantages you expect from Reynobond Aluminum Composite Material, including the ability

to withstand extreme temperatures and humidity, meaning there are no geographic limitations

as to where it can be used. Plus we can also provide screws that match the finish.

Reynobond Design Line. It’s another example of Excellence in Innovation from Alcoa Architectural

Products that can help you make an impact on our world.

Nordic White Sunny Pear Walnut Brown Mahogany Brown

Embala Brown Oleyo Brown Aneho Brown Café Brown

Terra Cream

Mineral Grey

Terra di Tosca

Mineral Antra Metalica Mineral Red

Terra Cotta Mineral Terra di Siena

Natural Finishes: Terra/Mineral

Natural Finishes: Wood

Cedar Brown

White Granite

Zinc Patina

Colonial Red

Zebra

Rose Granite

Copper Patina

Pale Oak

Koya Line

Blue-Grey Granite

Rust Patina

Golden Oak

Zebrano Natural

Black Granite

Jaya Pale

Natural Finishes: Granite

Natural Finishes: Patina

Check website for details. Availability is subject to change.

Please consult your Alcoa Architectural Products representative for specific availability.

Dark Oak

Okene Line

Scottish Oak

Dark Zebrano

Italian Walnut

Aciero Corten Light Oyster Travertine Apollo Stone

Riyad Stone

Natural Finishes: Stone



Tel. 800 841 7774

alcoaarchitecturalproducts.com

©2011 Alcoa Architectural Products. Reynobond® and Colorweld® are registered trademarks of Alcoa Inc.

AAP-0513—04/11 20000

All coatings are thoroughly tested and backed by the strength and integrity of Alcoa. Alcoa Architectural Products Colorweld DL coatings come

with a 20-year finish warranty. Please consult factory for warranty information.

Colors and patterns shown are as close to actual colors as possible within the limitations of commercial printing reproduction. This publication is

based on the latest data available at the time of printing. Due to product changes, improvements and other factors, Alcoa reserves the right

to change or withdraw information contained herein without prior notice. Contact Alcoa Architectural Products for material samples.

Information contained herein or related hereto is intended only for evaluation by technically skilled persons, with any use thereof to be at their

independent discretion and risk. Such information is believed to be reliable, but Alcoa Architectural Products (“Alcoa”) shall have no responsibility

or liability for results obtained or damages resulting from such use. Alcoa grants no license under, and shall have no responsibility or liability

for infringement of, any patent or other proprietary right. Nothing in this document should be construed as a warranty or guarantee by Alcoa,

and the only applicable warranties will be those set forth in Alcoa acknowledgement or in any printed warranty documents issued by Alcoa.

The foregoing may be waived or modified only in writing by an Alcoa officer.

For a complete technical overview of all Reynobond products, visit alcoaarchitecturalproducts.com.

Properties Test Method Coil-coated Aluminum Reynobond®

Specular Gloss @ 60º ASTM D523 Ranges from 20% to >80%

Pencil Hardness ASTM D3363 F min

Flexibility (T-bend) ASTM D4145 OT

Reverse Impact ASTM B2794 No cracking or adhesion loss

Salt Spray Resistance 5% Salt Fog @ 95 degrees ASTM B117 Passed 3000 hrs

Humidity Resistance 100% RH @ 95 degrees ASTM D2247 Passed 3000 hrs

Color Retention ASTM D2244 Maximum 5 fade

Chalk Resistance ASTM D4214 Maximum 8 chalk

Colorweld® DL Properties

Corporate IdentityImagine the Possibilities

Please reference our other brochures for additional color options:Design Line Color Chart for our complete line of wood, terra/mineral, granite, patina and stone paint finishes.Colorweld® 500 Color Chart for our standard architectural finishes, including mica and metallic paint finishes.

Program White DG-75

Program PearlDG-80

Brite WhiteDG-45

OysterPY-25

Classic WhiteDG-35

Program YellowDG-80

Matte WhiteDG-75

Program RedDG-80

Eastman WhitePY-25

Brite YellowDG-55

Imagine the possibilities for expressing your corporate identity in Reynobond® and Reynolux®

Leading companies in industries from petroleum to auto dealerships to retail choose Reynobond. The reasons are plain

to see. Reynobond delivers the flexibility that enables architects to explore the most imaginative and eye-catching

solutions to individualize the look of a corporate image. Our durable proven paint systems are formulated for high UV

resistance and help reduce façade maintenance costs over the life of a building. And of utmost importance to any brand,

Reynobond and Reynolux showcase program colors from one location to the next. From inspiration to implementation,

Alcoa Architectural Products offers innovative ways to help expand your palette of possibilities.

Paint Finish/Gloss Level:

DG (Duragloss®) LF (Colorweld® LF) PY (Polyester) NC (DurPY)

Patriot RedLF-80

Program BlueDG-80

Program TealDG-75

Patriot Blue/White Stripe LF-75

Scarlet RedDG-80

Matte BlueDG-75

Brite GreenDG-50

Brite Yellow/White Stripe DG-50

Classic Red DG-80

Brite BlueDG-75

Shamrock GreenDG-60

Program Teal/Yellow Stripe DG-70

Eastman BlueLF-25

Sapphire BlueDG-70

Patriot Red/White Stripe LF-75

Brite MirrorNC-95R

Eastman RedDG-40

Patriot BlueLF-75

Program BlackDG-80

Natural Brushed Aluminum LF-30



Tel. 800 841 7774

reynobond.com or reynolux.com

©2012 Alcoa Architectural Products. Reynobond® and Reynolux® are registered trademarks of Alcoa Inc.

AAP-0542—January 2012 ver.1.0 20000

Properties

Paint Finish Quick Specification Reference

Property Duragloss® Colorweld® LF Colorweld® 100

Specular GlossASTM D523@60°/ECCA T2

20% - 80% <10% - 80% 10% - >80%

Gloss RetentionASTM D523

10 yrs FLA >80% 5 yrs FLA >98%

Color RetentionASTM D2244

Max 5 fade Max 5 fade

Chalk ResistanceASTM D4214

Max 8 chalk Max 8 chalk

Film Hardness ASTM D3363/ECCA T4

HB-H HB-H F-2H

Abrasion Resistance ASTM D968

>40 liters min. 50 liters min.

Reverse Impact ASTM D2794/ECCA T5

No cracking or adhesion loss No adhesion loss No pick-off

Coating Flexibility ASTM D4145/ECCA T20

0T 1T, 3T† 1-2T

Salt Spray Resistance ASTM B117/ECCA T8

Passes 3000 hrs Passes 4000 hrs Passes 1000 hrs

Film Thickness ASTM D1400/ECCA T1

Nominal 1.0 mil† 0.15-0.3 mil primer 0.7-1.2 mil color coat

0.6-0.9 mil clear topcoat

0.2 mil primer0.75 mil topcoat

Chemical Resistance ASTM D1308

Muriatic acid: No effect Sulfuric acid: No effect

Muriatic acid: No effectNitric acid vapors: <5 ΔE

color change

AdhesionASTM D3359/ECCA T6

No adhesion loss No adhesion loss

Humidity ResistanceASTM D2247

No #8 blisters None or few #8 field blisters

None or few #8 field blisters

Property Duragloss® Colorweld® LF Colorweld® 100

Warranty 10 - 20 years† 5 - 20 years† 5 years

Resin Type Modified Polyester FEVE Polyester

UV Performance **** **** ** **

Gloss Range 20% – 80% 20% – 80% 20% – 30%

Colors Opaque / Metallic / Bright Opaque / Metallic / Bright Opaque

AAMA 2605/620 YES † NO

Economics $$$ $$$$$ $

†Parameter value varies within the paint system. Contact manufacturer for specific values. For more information on this color chart, please contact manufacturer at 1-800-841-7774.

†Parameter value varies within the paint system. Contact manufacturer for specific values. Contact your Alcoa Architectural Products representative for information concerning the Brite Mirror, NC (DurPY) paint finish.

Colors and patterns shown are as close to actual colors as possible within the limitations of commercial printing reproduction. This publication is based on the latest data available at the time of printing. Due to product changes, improvements and other factors, Alcoa reserves the right to change or withdraw information contained herein without prior notice. Contact Alcoa Architectural Products for material samples.

NEW Till12 Chips @ 5.625”w X 1.125”h

Dorn Color, Inc.

PrismFX™ Color-Shifting Finishes



Tel. 800 841 7774

reynobond.com

©2013 Alcoa Architectural Products. Reynobond® and Duragloss® are registered trademarks and PrismFX™ is a trademark of Alcoa Inc.

13AAP1412 October 2013 ver. 1.0 15000

Properties Test Method Coil-coated Aluminum Reynobond®

Specular Gloss @ 60º ASTM D523 Ranges from 20% to >80%

Pencil Hardness ASTM D3363 F min

Flexibility (T-bend) ASTM D4145 0-2 T-bend; No pick off

Reverse Impact ASTM B2794 No cracking or adhesion loss

Salt Spray Resistance 5% Salt Fog @ 95º ASTM B117 Passed 3000 hrs

Humidity Resistance 100% RH @ 95º ASTM D2247 Passed 3000 hrs

Color Retention ASTM D2244 Maximum 5 fade

Chalk Resistance ASTM D4214 Maximum 8 chalk

All coatings are thoroughly tested and backed by the strength and integrity of Alcoa. PrismFX™ coatings from Alcoa Architectural Products (“Alcoa”)

come with a 20-year warranty. Please consult factory for additional warranty information.

Colors and patterns shown are as close to actual colors as possible within the limitations of commercial printing reproduction. This publication

is based on the latest data available at the time of printing. Due to product changes, improvements and other factors, Alcoa reserves the right to

change or withdraw information contained herein without prior notice. Contact Alcoa Architectural Products for material samples and availability.

Information contained herein or related hereto is intended only for evaluation by technically skilled persons, with any use thereof to be at their

independent discretion and risk. Such information is believed to be reliable, but Alcoa Architectural Products shall have no responsibility or liability

for results obtained or damages resulting from such use. Alcoa grants no license under, and shall have no responsibility or liability for infringement

of, any patent or other proprietary right. Nothing in this document should be construed as a warranty or guarantee by Alcoa, and the only

applicable warranties will be those set forth in an Alcoa acknowledgement or in any printed warranty documents issued by Alcoa. The foregoing

may be waived or modified only in writing by an Alcoa officer.

For a complete technical overview of all Reynobond® products and color offerings, visit reynobond.com

PrismFX™ Paint Finish Properties

FPO

PrismFX™ Color-Shifting Finishes

Introducing PrismFX™ finishes—a new coating option for Reynobond® panels that can give your

building a look as dynamic as your design. This innovative coating creates subtle color shifts in

different lighting conditions. So a building that appears green, blue or silver in the morning

can shift to copper, violet or gold in the afternoon. With nine unique color-shifting

combinations available, you can change people’s perceptions of your building each and every

day. Bring a whole new dimension to your design— with PrismFX™ finishes.

PrismFX™ color-shifting finishes are part of our Duragloss® architectural family of coatings.

Like all our Duragloss® coatings, PrismFX™ finishes are a high-performance paint system that

provides excellent flexibility and film adhesion for forming. It is time-tested and is resistant

to humidity, impact, salt spray, pollution and abrasion, making it suitable for all outdoor

architectural applications and a wide range of other specialty uses. And, all nine of our

standard PrismFX™ finishes are backed by a 20-year warranty.

AUTUMN WIND

ARCTIC BLUE

STEEL VIOLET

GREEN FOREST

BLUE LAGOON

NIGHT STARS

SPRING LAKE

SILVER GOLD

INDIAN SUMMER

STOCKING COLORS

www.alucobondusa.com

HARVEST GOLD MICA PVDF 2

ANODIC SATIN PVDF 2

BRILLIANT SILVER METALLIC PVDF 3/SRI 73

SUNRISE SILVER PVDF 3/SRI 30

SILVER METALLIC PVDF 3/SRI 58

AZURE BLUE PVDF 3

FOCUS BLACK PVDF 3/SRI 30

RUSSET MICA PVDF 3/SRI 38

BRUSHED 50 BRUSHED GRAPHITE ZINC RUSTED METAL

OCEAN

BRUSHED STAINLESS

CHAMPAGNE METALLIC PVDF 3

SAKURA

HAZELNUT MICA PVDF 2/SRI 40

PATRIOT REDPVDF 3

ALABASTER PVDF 2/SRI 87

OYSTER PVDF 2/SRI 81

CASTLE GRAY PVDF 2/SRI 56

CADET GRAY PVDF 2/SRI 51

STATUARY BRONZE PVDF 2/SRI 8

DUSTY CHARCOAL PVDF 3

PLATINUM MICA PVDF 2/SRI 61

ANODIC CLEAR PVDF 2

REFLECT MIRROR

CUPRAL

BONE WHITE PVDF 2/SRI 89

spectra

naturAL

Classic

PVDF or Polyvinylidene Fluoride Finish systems are the industry standard for metal architectural coatings. The sRI or solar Reflectance Index with cool paint technology is a measure of a finish’s ability to reject solar heat, as shown by a small temperature rise. It is defined so that a standard black (reflectance 0.05, emittance0.90) is zero and a standard white (reflectance 0.80, emittance 0.90) is 100. SRI values are subject to change based on paint supplier and availability. Please contact Customer service for the most accurate listings as well as stocking of naturAL series and spectra colors.

RED FIREPVDF 3/SRI 35

naturAL Designer series

TeChnICAL DATA Alucobond Alucobond Plus Thickness 3mm 4mm 6mm 4mm PlusNominal Weight (lbs/sq.ft) 0.92 1.12 1.49 1.56Coefficient of Expansion x10-5 (in./in.˚F) 1.31 1.19 1.24 1.11Temperature Resistance -55˚ to 175˚ F (-48˚ to 80˚C)Minimum Peel Strength 115 N mm/mm

Tests and Building CodesGuided by the most comprehensive technical support team in the industry, Alucobond maintains constant and rigorous code compliance. From conceptual vision to finished project, the Alucobond sales and service professionals will guide you through the process.

north American Building Code AcceptanceAlucobond and Alucobond Plus are accepted by many code regulatory bodiesincluding:› IBC › Miami-Dade County, Florida› National Building Code of Canada› State of Florida

Alucobond Code Tests Alucobond has been tested in accordance with the following standards:› ASTM E 84 – Surface burning characteristics › ASTM D1929 – Ignition properties› ASTM D1781 – Peel strength› NFPA 285 – Intermediate scale multi-story (Alucobond Plus only)

PhysICAL PRoPeRTIes

Alucobond Composition› Aluminum facings in 0.020" nominal thickness (interior and exterior to ensure flatness)› Polyethylene core available in 3mm, 4mm and 6mm thicknesses (PE)› Proprietary fire-resistant core available in 4mm thickness only (Plus)

sheet Widths › Standard coil coated widths 50" and 62" › Standard anodized widths 62" › Custom width 40"

sheet Lengths› Standard lengths 146” and 196”› Custom lengths up to a maximum of 360”

Minimum Bending Radius› The minimum bending radius of Alucobond and Alucobond Plus without routing the interior skin is 15 times the thickness of the material.

Available Finishes› PVDF, FEVE› Polyester› HDP› Anodized: Clear, Light Bronze, Medium Bronze, Dark Bronze and Black› Monochromatics, Micas and Metallics› naturAL› Spectra

CUsToM CoLoRDon’t see what you are looking for? Let your imagination be our guide! The palette of coil-coated colors can be endless. Our color matching experts will work to match your color. Custom colors are available but require a 1,000 sqft. minimum order and are subject to set-up charges. Exact matches are sometimes not possible. Matching a color created by a spray method, particularly a metallic, may not match with a color created on a roll coated method.

To ensure that we identify your color correctly, we require either:A hand sample of at least 1" x 1", or a Pantone® color reference, which can be noted as a number with a “C” for coated or “U” for uncoated. Example: Pantone 220C, or a PPG paint code reference.

Send the color sample to:

Alucobond Custom Color Match Department 208 West Fifth Street Benton, KY 42025

Please provide your name, company name, address, phone number and email address, as well as the project name, project location, type of finish and gloss. We will update the progress of your custom color request via email.

WARRAnTIesFor warranty information please contact your Alucobond representative.

FInIsh sysTeMsAlucobond® Cool Systems are created utilizing a color and a Classic PVDF (Polyvinylidene Fluoride) finish system. When requesting a color, we will provide you with the resin type, the number of coats, the color name and the gloss level. Alucobond naturAL colors mimic the beauty of real metal surfaces to enhance the design of your architectural project. The finely textured aluminum scatters light for a close-up visual effect, while retaining the luster of smooth aluminum from afar. Alucobond spectra colors use high-quality fluorocarbon paint systems applied in a continuous coil-coated process to create a color-shifting surface. Depending on the pigment type and viewing angle, different wave-lengths of light are reflected, resulting in an ever-changing color gradient with iridescent highlights. Now, your entryways, columns, and facades can make a bold statement without upsetting your budget.

800.626.3365www.alucobondusa.com

Alucobond® is a registered trademark of 3A Composites USA Inc. Pantone® is a registered trademark of Pantone, Inc. © 2013 3A Composites USA. All Rights Reserved.8/2013

STOCKING COLORS

MARKET WHITE pvdf 2

WEST pEWTERpvdf 2

GRApHITE MICApvdf 3/SRI 6

ROMAN BRONZE pvdf 2/SRI 33

CASHMERE MICApvdf 2

dRIfTWOOdpvdf 2/SRI 40

ANOdIC BRONZE MICApvdf 2

ANOdIC dARK BRONZE MICA pvdf 3/SRI 6

SOUTHWEST GOLd METALLICpvdf 3

ANTIqUE

SUMMER SUEdE pvdf 3/SRI 27

COCOA BEAN pvdf 3/SRI 31

SESAME SEEdpvdf 2/SRI 63

CHIpOTLE pvdf 2/SRI 43

GLAdE GREEN pvdf 2/SRI 37

BLUE THUNdER pvdf 2/SRI 38

CHERRY SMITH SILvER pvdf 2

COppER METALLIC pvdf 3/SRI 35

TITANIUM METALLICpvdf 3/SRI 46

BISTRO BRONZEpvdf 2

CARAMEL LATTE pvdf 2/SRI 71

Spectra

SUNSET GALAxY BLUE

COppER pENNYpvdf 2

STEEL CITY SILvER pvdf 2/SRI 37

www.alucobondusa.com

ROASTEd REd pEppER pvdf 3/SRI 41

dAYLILLY YELLOWpvdf 2

AMAZON

PVDF or Polyvinylidene Fluoride Finish systems are the industry standard for metal architectural coatings. The SRI or Solar Reflectance Index with cool paint technology is a measure of a finish’s ability to reject solar heat, as shown by a small temperature rise. It is defined so that a standard black (reflectance 0.05, emittance0.90) is zero and a standard white (reflectance 0.80, emittance 0.90) is 100. SRI values are subject to change based on paint supplier and availability. Please contact Customer Service for the most accurate listings as well as stocking of Spectra colors.

WHITE GOLd

Contemporary

CONTEMPORARY COLORSContemporary colors are subject to custom color fees and minimums

ANTHRACITE SILvER

PhySICal PRoPeRtIeS

alucobond Composition› Aluminum facings in 0.020” nominal thickness (interior and exterior to ensure flatness)› Polyethylene core available in 3mm, 4mm and 6mm thicknesses (PE)› Proprietary fire-resistant core available in 4mm thickness only (Plus)

Sheet Widths › Standard coil coated widths 50” and 62” › Standard anodized widths 62” › Custom width 40”

Sheet lengths› Standard lengths 146” and 196”› Custom lengths up to a maximum of 360”

Minimum Bending Radius› The minimum bending radius of Alucobond and Alucobond Plus without routing the interior skin is 15 times the thickness of the material.

available Finishes› PVDF, FEVE› Polyester› HDP› Anodized: Clear, Light Bronze, Medium Bronze, Dark Bronze and Black› Monochromatics, Micas and Metallics› naturAL› Spectra

CUStoM ColoRDon’t see what you are looking for? Let your imagination be our guide! The palette of coil-coated colors can be endless. Our color matching experts will work to match your color. Custom colors are available but require a 1,000 sqft. minimum order and are subject to set-up charges. Exact matches are sometimes not possible. Matching a color created by a spray method, particularly a metallic, may not match with a color created on a roll coated method.

To ensure that we identify your color correctly, we require either:A hand sample of at least 1” x 1”, or a Pantone® color reference, which can be noted as a number with a “C” for coated or “U” for uncoated. Example: Pantone 220C, or a PPG paint code reference.

Send the color sample to:

Alucobond Custom Color Match department 208 West fifth Street Benton, KY 42025

Please provide your name, company name, address, phone number and email address, as well as the project name, project location, type of finish and gloss. We will update the progress of your custom color request via email.

WaRRantIeSFor warranty information please contact your Alucobond representative.

CONTEMPORARY COLORS

FInISh SySteMSAlucobond® Cool Systems are created utilizing a color and a Contemporary PVDF (Polyvinylidene Fluoride) finish system. When requesting a color, we will provide you with the resin type, the number of coats, the color name and the gloss level. alucobond Spectra colors use high-quality fluorocarbon paint systems applied in a continuous coil-coated process to create a color-shifting surface. Depending on the pigment type and viewing angle, different wave-lengths of light are reflected, resulting in an ever-changing color gradient with iridescent highlights. Now, your entryways, columns, and facades can make a bold statement without upsetting your budget.


Alucobond® is a registered trademark of 3A Composites USA Inc. Pantone® is a registered trademark of Pantone, Inc. © 2015 3A Composites USA. All Rights Reserved.

teChnICal Data alucobond alucobond Plus Thickness 3mm 4mm 6mm 4mm PlusNominal Weight (lbs/sq.ft) 0.92 1.12 1.49 1.56Coefficient of Expansion x10-5 (in./in.˚F) 1.31 1.19 1.24 1.11Temperature Resistance -55˚ to 175˚ F (-48˚ to 80˚C)Minimum Peel Strength 115 N mm/mm

tests and Building CodesGuided by the most comprehensive technical support team in the industry, Alucobond maintains constant and rigorous code compliance. From conceptual vision to finished project, the Alucobond sales and service professionals will guide you through the process.

north american Building Code acceptanceAlucobond and Alucobond Plus are accepted by many code regulatory bodiesincluding:› IBC › Miami-Dade County, Florida› National Building Code of Canada› State of Florida

alucobond Code tests Alucobond has been tested in accordance with the following standards:› ASTM E 84 – Surface burning characteristics › ASTM D1929 – Ignition properties› ASTM D1781 – Peel strength› NFPA 285 – Intermediate scale multi-story (Alucobond Plus only)

6/2015


Alucobond® is a registered trademark of 3A Composites USA Inc. © 2015 3A Composites USA. All Rights Reserved.

Acura

Aloft Hotel

Arby’s

Audi

Buick/GMC

Chevrolet

Chrysler

Ford/Lincoln/Mercury

Honda

Infiniti

Jaguar/Land Rover

Lexus

Mercedes

Mini Cooper

Nissan

Porsche

Rite Aid

Rooms to Go

Spire BlueChampagne Metallic

BGY Gray

Carb Red

Silver Metallic

TBL BlackRVW WhitenaturAL Reflect

BowTie BlueSilver MetallicnaturAL Brushed

Silver MetallicnaturAL Reflect

Focus BlacknaturAL BrushednaturAL Reflect

HMC BlueHMC RedPC White

naturAL Brushed

Land Rover GreenOysterSilver Metallic

Anodic ClearMZG Gray Mica II

Azure Deep BlueSunrise Silver MetallicFocus BlackRVW White

Tri-Corn Black

Sunrise Silver Metallic

Sunrise Silver MetallicTri-Corn Black

OysterDriftwood Mica

Rooms to Go Blue

62”x196”50”x196”, 62”x196”

Call for Availability

50”x144”

50”x196”62”x196”

62”x196”62”x196”49.2”x146”

50”x196”, 62”x196”50”x196”, 62”x196”62”x196”

50”x196”, 62”x196”49.2”x146”

50”x196”62”x196”49.2”x146”

Call for AvailabilityCall for AvailabilityCall for Availability

62”x196”

50”x196”, 62”x196”50”x196”, 62”x196”50”x196”, 62”x196”

62”x196”Call for Availability

62”x196”62”x196”50”x196”, 62”x196”62”x196”

62”x196”

62”x196”

62”x196”62”x196”

50”x196”, 62”x196”50”x196”


PROGRAM COLORS SIze AVAILABILITY

CORPORATE ID LIST

*All colors and sizes are subject to change without notice. All colors stocked in 4mm thickness as standard. Please contact customer service for our most updated stock items.

PAINT TYPe

PVDF 3PVDF 3

PVDF 2

IDS 2

PVDF 3

IDS 2PVDF 2

IDS 2PVDF 3FEVE 1

PVDF 3

PVDF 3FEVE 1

IDS 2PVDF 2PVDF 2

FEVE 1

IDS 2PVDF 2PVDF 3

PVDF 2PVDF 2

PVDF 3PVDF 3PVDF 3PVDF 3

IDS 2

PVDF 3

PVDF 3IDS 2

PVDF 2PVDF 2

PVDF 2

8/2015

(cont. on back)


Alucobond® is a registered trademark of 3A Composites USA Inc. © 2015 3A Composites USA. All Rights Reserved.

Subaru

TGI Friday’s

Toys R Us

Volvo

Wendy’s

Silver MetallicAlabaster

Patriot Red

Clear Anodized

CreamSunrise Silver Metallic

Red Fire

50”x196”, 62”x196”50”x196”, 62”x196”

62”x196”


62”x196”62”x196”

50”x196”

PROGRAM COLORS SIze AVAILABILITY

CORPORATE ID LIST

*All colors and sizes are subject to change without notice. All colors stocked in 4mm thickness as standard. Please contact customer service for our most updated stock items.

PAINT TYPe

PVDF 3PVDF 2

PVDF 3

Anodized

PVDF 2PVDF 3

PVDF 3

8/2015

BUILD YOURS WITH ALPOLIC® COLORS AND FINISHES

Stock Program Colors

PROGRAM colors are available in the standard options shown here, or can be custom-created for your unique project. We use the advanced Lumiflon® FEVE fluoropolymer resin in two or three coats, or the Kynar® PVDF coating system to create a vivid, extremely durable finish in an astounding range of colors and glosses, including metallic and mica options. Panels are stocked in either 3mm or 4mm thickness.

Specialty Stock Colors and Finishes

STONE/TIMBER SERIES finishes are produced using our proprietary image-transfer process in concert with Lumiflon® FEVE fluoropolymer coatings, providing exceptional protection with the classic beauty of stone or timber. We stock standard 62-inch panels for your immediate needs.

PRISMATIC finishes combine Lumiflon® FEVE fluoropolymer technology with specialized pigments to create unique colors and effects. The resulting finishes can make the surface glisten or even change colors with different lighting or the movement of the sun. Consult our Prismatic brochure to find the perfect color, gloss and effect for your design. MULTI-COLOR panels incorporate an advanced coating process engineered by ALPOLIC® to accommodate almost any color scheme. From bright and glossy to muted and subtle, these rich and versatile color systems can only be accomplished by combining Lumiflon® FEVE technology with our advanced die coil coating system. We can work with you to help you choose the perfect look to convey your message.

DECORATIVE panels use specially treated aluminum surfaces with crystal-clear coats of Lumiflon® FEVE resin to protect the panels and maintain a pristine look, even in harsh exterior applications. HPA offers a polished shine, while HLZ has the look of brushed stainless steel.

CUSTOM COLORS – Bright, clean high-gloss colors, rich metallics, low-gloss earth tones, prismatic special effects and more: If you can imagine a color, we can make it real. Contact customer service to connect with our color experts.

Architectural Stock Finishes and Colors

STOCK painted colors are available on 4mm-thick panels, with many of the most popular choices stocked in a selection of 50- or 62-inch widths and 146- or196-inch lengths. Specify a polyethylene (PE) or fire-resistant (fr) core – typically required by fire codes when building over 40 feet. Then choose a fluoropolymer paint finish offered in a variety of solid colors, metallics and micas. These panels are manufactured to architectural standards and stocked for immediate shipment.

ANODIZED panels are manufactured with 1100 alloy aluminum. They are available in both 50- and 62-inch widths with a stock clear anodized Class 1 finish or a choice of five custom Class 1 colors.

NATURAL METALS offer a traditional look in a state-of-the-art panel system. These 4mm panels offer your choice of metal surface while retaining the flatness and workability of aluminum composite.

Choose ALPOLIC® performance to make your project practical and durable. Choose ALPOLIC® finishes and colors to make it truly remarkable. We offer an extensive selection of rich, vibrant colors and styles for both painted and natural metal surfaces, working with you to bring your design intent to reality. Rigid, lightweight panels that fulfill your vision with a finish of enduring quality – that’s the beauty of ALPOLIC® materials. Browse our offerings, and let’s build.

Choose the Highest Standard of Quality, Durability and Beauty

HIGH-PERFORMANCE FLUOROPOLYMER RESINS – Our Lumiflon® FEVE and Kynar® PVDF resins are the most advanced architectural coatings available, meeting or exceeding AAMA 2605 specifications to deliver superior durability, weatherability and chemical resistance. Choose Lumiflon® FEVE for the broadest color palette with a gloss range from satin to high luster. This remarkable finish can also be touched up with an air-dry system.

SHORT RUN CAPABILITIES – With our advanced die coating process and controlled curing, we can coil coat as little as 1,000 square feet of material in a broad choice of colors. You can count on the same color consistency, quality and lengthy warranty we offer for the largest orders. Gain practically unlimited design flexibility, thanks to our ability to deliver short runs of custom colors in your choice of 40-, 50- or 62-inch widths.

GLOSS RANGE – Different gloss levels can significantly change the eye’s perception of color. If you would like a different gloss level than the sample you submit for color matching, let us know. We will work with you directly to ensure the gloss level you want is achieved.

FINISH DIRECTIONALITY – For best color consistency, maintain the same directionality throughout design, estimation, fabrication and construction. We recommend ordering finishes for your entire job at one time, from one lot of material.

DIE COATING Although widely used roll coaters can achieve adequate quality and efficiency, our advanced die coaters permit direct coating on the aluminum surface to ensure smoother, finer finishes without roping marks.

ROLL COATER DIE COATER

Die

Aluminum

LIGHT REFLECTANCE VALUE – LRV numbers indicate the percentage of visible light reflected by the surface. This value is defined in ASTM C609 as the Y value in an XYZ/Yxy color space. While the LRV values shown on this chart are typical, there can be slight variations between individual lots.

SOLAR REFLECTIVE INDEX – SRI numbers, as defined by ASTM E1980 using 12 W/m2K values, indicate the material’s reflectivity (how well it reflects back instead of absorbing radiant energy) and emissivity (how well it radiates absorbed heat back into the environment). The Cool Roof Rating Council (CRRC) requires an SRI value of 29 or greater for steep-slope roofs to earn a “Cool” rating. Most of our Architectural stock colors meet this requirement, and we have added “Cool” after the SRI value for easy reference. For expert assistance with product availability, material selection, sizing and colors, please contact your local ALPOLIC® sales office.

2 Coat/Solid/Mica

3 Coat/Metallic/Prismatic

Color/Mica

Primer

Substrate

Core

Substrate

Primer

Metallic/Color

Clear/Prismatic

Primer

Substrate

Core

Substrate

Primer

Bone White 4-BNT-30 LRV 78.50/SRI 82-Cool

Oyster 4-CRT-30 LRV 72.46/SRI 82-Cool

Mist White 4-MST-30 LRV 69.96/SRI 75-Cool

Aluminum Grey 4-AGT-30 LRV 31.60/SRI 26

BGY Grey 4-BGY-50 LRV 10.41/SRI 7

Bronze 4-JBR-30 LRV 3.34/SRI 2

TOB Black 4-TOB-15 LRV 1.01/SRI 0

M I C A

Mica Platinum 4-OPT-50 LRV 30.88/SRI 53-Cool

Mica Anodic Clear 4-MNC-30 LRV 34.43/SRI 56-Cool

Mica Champagne 4-MCU-30 LRV 22.61/SRI 38-Cool

Mica Grey 4-MZG-50 LRV 7.95/SRI 14

M E TA L L I C

BSX Silver Metallic 4-BSX-30 LRV 30.94/SRI 71-Cool

Silver Metallic 4-SMX-30 LRV 36.59/SRI 63-Cool

Champagne Metallic 4-CMX-30 LRV 31.19/SRI 59-Cool

Medium Bronze Metallic 4-MBX-30 LRV 31.20/SRI 40-Cool

S O L I D

30 Year Warranty Stock Colors Stocked in 4mm thick panels

Mica MFS Silver 4-MFS-30 LRV 13.41

*Colors shown are as close to actual colors as allowed by the printing process. Due to product improvements, changes and other factors Mitsubishi Plastics Composites America, Inc. reserves the right to change or delete information herein without prior notice. Please refer to warranty details for exclusions and limitations. Additional warranty coverage over that stated may be given to some projects/products. Please consult Customer Service.

S O L I D

20 Year Warranty Stock Colors

BBR Red 4-BBR-30 LRV 8.06 3&4mm

BTR Red 4-BTR-50 LRV 11.57 3&4mm

TOR Red 4-TOR-70 LRV 9.06

JLR Red 4-JLR-50 LRV 5.44

JXR Red 4-JXR-35 LRV 10.50

TRC Red 4-TRC-35 LRV 8.52

AUB Blue 4-AUB-50 LRV 3.25

CVB Blue 4-CVB-70 LRV 13.79

HNB Blue 4-HNB-50 LRV 16.78

RTB Blue 4-RTB-60 LRV 9.06

MBU Blue 4-MBU-30 LRV 10.59

HYB Blue 4-HYB-30 LRV 4.20

ABE Blue 4-ABE-70 LRV 23.73

AYW Yellow 4-AYW-70 LRV 61.77

HYE Yellow 4-HYE-50 LRV 62.5


Stocked in 4mm unless otherwise stated

HWH White 4-HWH-50 LRV 80.8

COW White 4-COW-30 LRV 68.67

BLX Black 4-BLX-30 LRV 0.89 3&4mm

TBL Black 4-TBL-70 LRV 0.75 3&4mm

RVW White 4-RVW-G45 LRV 86.34

M E TA L L I C

TSZ Silver Metallic 4-TSZ-80 LRV 32.00

TBX Silver Metallic 4-TBX-30 LRV 38.753&4mm

GOY Gold Metallic 4-GOY-80 LRV 25.51

CVG Grey 4-CVG-50 LRV 14.38 3&4mm

PEX Pewter Metallic 4-PEX-30 LRV 20.63

S O L I D

10 Year Warranty Stock Colors

STR Red 3-STR-75 LRV 12.55

TRD Red 3-TRD-80 LRV 10.26

FEF Red 3-FEF-80 LRV 11.64

BPS Pearl 3-BPS-30 LRV 68.79

ETT Tan 3-ETT-30 LRV 47.87

CRY Oyster 3-CRY-50 LRV 72.30

CTW White 3-CTW-30 LRV 76.42

MCV Pearl White 3-MCV-70 LRV 68.21

SAW Super White 3-SAW-75 LRV 80.62

EWH White 3-EWH-35 LRV 90.01

DYB Blue 3-DYB-50 LRV 10.06

CFB Blue 3-CFB-70 LRV 7.24

SHB Blue 3-SHB-70 LRV 4.12

BGN Green 3-BGN-50 LRV 14.39

BYL Yellow 3-BYL-50 LRV 65.93

EYL Yellow 3-EYL-35 LRV 48.05

YLW Yellow 3-YLW-45 LRV 49.88

SBR Bronze 3-SBR-30 LRV 6.32

CNC Charcoal 3-CNC-30 LRV 4.20

SOG Grey 3-SOG-75 LRV 49.50

TXG Grey 3-TXG-70 LRV 40.69

Stocked in 3mm thick panels


Specialty Stock Colors/Finishes

M U LT I - C O L O R

Red/White 10 Year Finish Warranty 3-209-70 LRV 11.64/80.90

Blue/White 10 Year Finish Warranty 3-207-70 LRV 8.00/81.04

Yellow/White 10 Year Finish Warranty 3-234/238-35 LRV 48.05/90.01

P R I S M AT I C D E C O R AT I V E

Architectural Premium Stock Finishes Call ALPOLIC® Customer Service for Warranty Details 800.422.7270

Black Granite 4-LBG-80 LRV N/A

MRT Prismatic Magma 10 Year Finish Warranty 3-MRT-70 LRV 11.33

DQO Pearlescent Orange 10 Year Finish Warranty 3-DQO-80 LRV 22.21

HPA High Polished Aluminum 5 Year Finish Warranty 3-HPA-70 LRV 0.88

HLZ Hairline Aluminum5 Year Finish Warranty 4-HLZ-80 LRV 16.32

Stainless 4-4HL LRV 21.84/SRI 34-Cool

Zinc 4-AZZ LRV 21.51/SRI 0

S T O N E S E R I E S | 20 Year Finish Warranty

Maple 4-MPL-30 LRV N/A

Walnut 4-WLN-30 LRV N/A

Mahogany 4-QAE-30 LRV N/A

T I M B E R S E R I E S | 20 Year Finish Warranty

N AT U R A L M E TA L S

Clear 4-CLR LRV 34.31/SRI 84-Cool

A N O D I Z E D

Copper 4-C12 LRV 5.03/SRI 55-Cool


Lumiflon® FEVE, a remarkable second-generation fluoropolymer coating, meets the weatherability and chemical-resistance standards you would expect from PVDF finishes, but delivers unprecedented design and performance advantages – a rich palette of vivid colors, a full gloss range, excellent adhesion, recoatability and even ambient cure capabilities.

Durability

Color Range

Color Retention

Gloss Range

Gloss Retention

Chalking Resistance

Field Touch-Up

Marring Resistance

Meets AAMA 2605

Bright to Muted

Excellent

30–70

Excellent

Excellent

Excellent

Excellent

Meets AAMA 2605

Muted Only

Excellent

30–40

Excellent

Excellent

Poor

Good

PVDF/Kynar®

For additional information, samples or a list of ALPOLIC® fabricators, please call 1-800-422-7270 or visit www.alpolic-americas.com.

401 Volvo Parkway, Chesapeake, VA 23320Telephone: 800-422-7270 | Facsimile: 757-436-1896www.alpolic-americas.com | e-mail: [email protected]

Due to product improvements, changes and other factors, Mitsubishi Plastics Composites America, Inc. reserves the right to change or delete information herein without prior notice. ©2014 Mitsubishi Plastics Composites America, Inc. All rights reserved. ALPOLIC® is a registered trademark of Mitsubishi Plastics Inc. Lumiflon® is a registered trademark of Asahi Glass Company. Kynar® is a registered trademark of Arkema, Inc. LITAP3000 Rev.14 April 2014

®

FEVE/Lumiflon®

Color Chart

Edition: 6www.vitrabond.com

WorKING WIth VItraBoND

Vitrabond can be machined and shaped using extremely simple techniques and equipment.

VITRABOND is a light weight composite metal panel cladding material, and boasts the widest variety of surfaces and finishes in the industry. By fusing metal skins to a composite core in a continuous coil manufacturing process, VITRABOND achieves an exceptional degree of strength and durability.VITRABOND is well established in the market with a long track record of consistency, reliability and cost effectiveness, and is recognized by Architects, Builders and Installers worldwide as the superior cladding solution. With our dedicated customer support staff and our continual product development, we are readily available to meet your requirements.

KEY BENEFItS oF VItraBoND

• Highly durable PVDF fluoropolymer Kynar 500 coating system.

• Unlimited custom colors with no MOQ (We can match any PMS, Pantone, Paint, Powder coat)*

• Compatible with all attachment systems on the market that are designed for aluminum composite panel.

• 110% Stock & Color Policy - extra material in case you need it!• Peel-off protective film

tYPICal aPPlICatIoNS For VItraBoND

• Low Rise Architectural• High Rise Architectural• Canopies & Awnings• Interiors• Refurbishment• Curtain walls• Transportable buildings and

accommodation buildings.

VItraBoND & VItraBoND/FrALUMInUM COMPOSITe PAneL

CuttING

FolDING

ShEarING

CNC routING

roll-BENDING

ProFIlING

PuNChINGPErForatING

FaBrICatING

DrIllING

StaNDarD ShEEt SIzES

• Custom Widths available from 24” to 80”• Available up to 10mm think

*Please note:• not all colors are stocked in all sizes.• For non-stock orders we can produce custom sizing.

Please call Fairview to check availability.

110% StoCK & Color PolICY

When the quantities, sheet sizes and color requirements for your project are received, 110% of the material required for your project (up to 2,000sf extra per color!) is reserved in our warehouse, so that the fabricator can draw on the material as needed. This material is set aside until the project is completed, which ensures color consistency for the entire project and reduces waste factor costs!

WIDTHS (“) LengTHS (“)

40

122

146

196

50

122

146

196

62

122

146

196

Vitrabond is the most Versatile composite

panel aVailable!compatible with all attachment systems and wall assemblies!

www.vitrabond.com

VItraBoNDCOLOR RAngeExPrESS raNGE

SPECIal orDEr

These are the most common colors, and are maintained in inventory for quick delivery**Note: While we strive to maintain sufficient inventory for all of our clients, we cannot guarantee that all colors and sheet sizes will be available on short notice. We recommend you contact us in advance about the project so that we can ensure stock availability in the colors and sizes that you need.

Vitrabond has the broadest range of colors and finishes in the industry, some of which are included in our “Special Order” range on the following pages. Some of these finishes may be in stock - please call for availability. Unlimited custom colors and finishes available

MEtallICa MeTALLIC COLORS

VItra Fx SPeCIAL eFFeCTS COLORS

VItraCrEatE WOOD & STOne FInISHeS

VItraBoND UnLIMITeD COLORS

NaturalINE nATURAL MeTAL FInISHeS

ClaSSICo SOLID COLORS

www.vitrabond.com All colors in this color chart are to be used as a guide only. The color accuracy is subject to the calibration of your monitor and the limitations of your printer. For exact colors, please request a physical sample.

MEtallICa - MeTALLIC COLORS

ExPrESS raNGE

BRIgHT SILVeR MeTALLIC VB9801

gOLD MeTALLIC VB4150

COPPeR MeTALLIC VB9809

ASCOT WHITe VB9210

gReYSTAneS VB9304

WHITe VB9902

BLACK VB9130

SILVeR MeTALLIC VB9601

SMOKe SILVeR MeTALLIC VB9134

CHAMPAgne MeTALLIC VB9205

BeLLeReVe BAY VB9107

OFF WHITe VB9702

SILVeR ICe MeTALLIC VB9701

DARK gReY MeTALLIC VB9137

BROnZe MeTALLIC VB9308

LAKe FROMe VB9504

FRAnKSTOn VB9103

ClaSSICo - SOLID COLORS


ClaSSICo - SOLID COLORS

VInTAge gReen VB1530

RUBIS ReD VB1685

BAKOS BLUe VB1490

BRIMSTOne VB9011

PeARL WHITe gLOSS VB1025

STROng SAge VB1585

TACUMA BAY VB9802

LOWeSDALe VB9061

AIRPORT WHITe SATIn VB1005

AnTHRAZIT gReY VB1255

BRIgHT ORAnge VB1190

BOAT HARBOUR VB9207

PURe APPLe VB1550

CAPSICUM ReD VB1690

RAILWAY OFF WHITe VB1090

LeMOn YeLLOW VB1120 BROWn COAL VB9108

BeIge VB1310

gRAPHITe ReD VB9477

ULTRAMARIne BLUe VB1460

FAIRVIeW gReen VB9212

VItraBoND - UnLIMITeD COLORS!

SPECIal orDEr


NaturalINE - nATURAL MeTAL FInISHeS


SPECIal orDEr

MIRROR FInISH VB5800 HAIRLIne FInISH VB5850 OPAQUe FInISH VB5755

CCOOPPPPEERR

WEATHERED COPPER – C02

PATINA COPPER – C03

BBRRAASSSS // BBRROONNZZEE

BRUSHED BRASS – B01

BRUSHED BRONZE – B03

ZZIINNCC

BRUSHeD BRASS VB5115AnODIZeD CROSS BRUSHeD VB5848

FAUx CORTen VB5360

AnODIZeD BRILLIAnT MIRROR VB5801 AnODIZeD BRUSHeD VB5845

CCOOPPPPEERR






ZZIINNCC

BLUe gReY VB5740 gRAPHITe gReY VB5225

CCOOPPPPEERR






ZZIINNCC

QUARTZ gReY VB5210 AnTHRACITe gReY VB5290

FAUx ZInC DARK VB5220

BRUSHeD ALUMInUM VB5855

Faux - ReALISTIC FInISHeS

natural Zinc natural Zinc

aluminumstainless steel

natural Zinc natural Zinc

nATURAL COPPeR VB5160natural copper

CCOOPPPPEERR






ZZIINNCC

WeATHeReD COPPeR VB5365natural copper

CCOOPPPPEERR






ZZIINNCC

PATInA COPPeR VB5570natural copper

CCOOPPPPEERR






ZZIINNCC

BRUSHeD BROnZe VB5185natural bronze

natural brassanodized aluminum

FAUx ZInC LIgHT VB5790aluminum

FFAAUUXX--ZZIINNCC

FAUX-ZINC – 404

FAUX-ZINC – 408

FAUX-ZINC – 406

FFAAUUXX--CCOOPPPPEERR

FAUX-COPPER PATINA – 407

FAUX-COPPER PATINA – 405

This Color Chart is a representation only. Actual colors may vary. v 2012.11

FAUx ZInC CHARCOAL VB5260aluminum

stainless steel

aluminum

anodized aluminum

aluminum

stainless steel

anodized aluminum

CHROMATIC PURPLe VB7450 CHROMATIC TIgeR VB7180 JADe MeTALLIC VB9031 SPARKLIng BLACK VB7295

SPARKLIng BLUe VB7470 SPARKLIng ReD VB7650 SPARKLIng WHITe VB7020

VItra Fx - SPeCIAL eFFeCT COLORS (Other special effect finishes also available)

SPECIal orDEr

SPARKLIng DARK gReY MeTALLIC VB7250

AMeRICAn PIne VB8330 gOLDen CeDAR VB8165 TeAK VB8350 DARK OAK VB8388

WooDCrEatE - WOOD gRAIn FInISHeS (Other wood grain finishes also available)

WHITe MARBLe VB6060 gReen MARBLe VB6575 BROWn MARBLe VB6380 BLACK gRAnITe VB6250

StoNECrEatE - nATURAL STOne (Other stone finishes also available)


MAnUFACTUReD & SUPPLIeD BY:

AUSTRALASIA HeAD OFFICe:P: +61 2 6352 2355

nORTH AMeRICA:P: +1 860 242 2711

UnITeD KIngDOM:P: 0844 800 7131

E: [email protected]

www.fairviewarchitectural.com

www.vitrabond.com

colorweld 500 architectural finishes - allied metal charts.pdf · colorweld 500 standard, colorweld...

Documents