colortrac series 4x - pc

Colortrac Series 4Scanner Spares

Catalogue.

Colortrac Series4 enhanced Scanner.

S4e Spares Catalogue V2.1 of 19

Colortrac S4e Spares Catalogue V2.1

©Colortrac Ltd 2004

This catalogue was updated for the enhanced scanners, but it also includes the original series4 scanners. This document supersedes all previous versions. Contact support for anyquestions about this or other documents from ACTion Imaging.

Index

1. Parts List Page 3

2. Covers and Panels Page 7

3. Boards and Electronics Page 8

4. Motors, Belts and Cables Page 10

5. Brackets, Lids and Extrusions Page 12

6. Paper Sensors Page 14

7. Cameras and Mirrors Page 15

8. Stand Assembly Page 16

9. Miscellaneous Page 17

10. Recommended Held Spares Page 18



Parts List

Part No. DescriptionP000022 Weber Protection SwitchP000027 Light Tube (42” chassis)P000325 Pinch Roller BodyP000351 Stand CastersP000469 Pivot Locator PinP000517 HandwheelP001001 Pre-enhanced Digital board (Double SCSI)P001002 Power SupplyP001004 Ballast Board 58 watt (54” chassis)P001005 Ballast Board 36 watt (42” chassis)P001006 Light SensorP001011 95 Grooves Timing BeltP001012 256 Grooves Timing BeltP001022 Lens 6.7 F-stop (for 5480e)P001023 Lens 5.6 F-stop (for all other machines.)P001032 Camera GasketP001035 Chassis Locking Pivot Pin*P001036 HandwheelP001056 Tube ClampP001065 Sensor Flag WireP001066 Front Sensor Arm Assy (54” chassis)P001067 Rear Sensor Arm Assy (54” chassis)P001069 Microsensor Front Mounting BrktP001070 Microsensor Rear Mounting Brkt.P001071 Sensor Wire CouplingP001090 LH End CoverP001091 Paper TrayP001092 RH End CoverP001093 Lid Extrusion.(54” chassis)*P001094 Lid Catch LHP001095 Lid Catch RHP001096 Lid Pivot Pin (x2)P001105 Paper Hold-down (54”)P001109 Mirror Bar Lever Sub AssyP001110 Mirror Bar LH Bottom PlateP001111 Mirror Bar RH Bottom PlateP001115 Mirror Bar LH Top PlateP001116 Mirror Bar RH Top PlateP001118 LH Stand Side MemberP001119 RH Stand Side MemberP001120 Tube CapP001123 Rear Panel (54” chassis)



P001124 Front Panel (54” chassis)P001125 Bottom PanelP001126 Lower Panel RHP001127 Ballast Board Mounting Brkt.P001128 Digital Board Mounting Brkt.P001139 4860e Lower Mirror Bar Assy.P001140 4860e Upper Mirror Bar Assy.P001141 5480e Upper Mirror Bar Assy.P001142 5480e Lower Mirror Bar Assy.P001143 Light Tube (54” chassis)P001144 Display BoardP001145 Paper Sensor Cable Assy.P001146 Power Inlet FilterP001147 Power Inlet to Switch Cable Assy.P001148 Switch to Ballast cable Assy.P001149 Switch to PSU Cable Assy.P001150 PSU to Digital Cable AssyP001151 Light Sensor to Ballast Cable Assy.P001152 Ballast to Tube Cable Assy.P001153 Digital to Display and Ballast Cable Assy.P001183 Packing Crate (54” chassis)P001184 Paper Tray GuideP001203 Motor & Cable AssyP001207 Front Extrusion Assy (non TE 54” chassis)P001208 Rear Extrusion Assy (non TE 54” chassis)P001209 Motor Drive AssyP001210 Paper Guide Assy.(54”,Replaced as complete unit.)P001211 Normalisation Target (54” chassis)P001212 Label Paper Feed TrayP001214 Voltage Rating LabelP001218 Auto-stitch TargetP001234 Lower Panel LHP001242 Pinch RollerP001243 RH End Plate Sub Assy.P001244 LH End Plate Sub Assy.P001250 Camera EMC Reduction CoverP001298 Packing Crate (42” chassis)P001299 Camera 1 Ribbon Cable (3680e & 4260e)P001300 Camera 2 Ribbon Cable (3680e & 4260e)P001301 Camera 1 Ribbon Cable (3640e)P001302 Ballast to Tube Cable Assy.P001303 Digital to Display and Ballast Cable Assy.P001311 Front Sensor Arm Assy (42” chassis)P001312 Rear Sensor Arm Assy (42” chassis)



P001315 Paper Hold-down (42” chassis)P001316 Paper Tray 4260eP001317 Lid Extrusion.(42” chassis)*P001318 4260e Lower Mirror Bar Assy.P001319 4260e Upper Mirror Bar Assy.P001321 3680e Lower Mirror Bar Assy.P001322 3680e Upper Mirror Bar Assy.P001324 3640e Lower Mirror Bar Assy.P001325 3640e Upper Mirror Bar Assy.P001327 Front Panel (42” chassis)P001328 Rear Panel (old pre-enhanced scanners 42” chassis)P001329 Bottom PanelP001331 Paper Tray 3640e & 3680eP001332 Label Paper Feed Tray 4260eP001333 Label Paper Feed Tray 3680eP001334 Label Paper Feed Tray 3640eP001338 Normalisation Target (42”)P001339 Voltage Rating Label 4260eP001341 Paper Guide Assy.(42”, Replaced as complete unit.)P001342 Rear Extrusion Assy (non TE 42” chassis)P001343 Front Extrusion Assy (non TE 42” chassis)P001347 Voltage Rating Label 3680eP001352 Voltage Rating Label 3640eP001361 Label ACTion Imaging LogoP001371 Camera 1 Ribbon Cable (5480e)P001372 Camera 2 Ribbon Cable (5480e)P001373 Camera 3 Ribbon Cable (5480e)P001374 Camera 1 Ribbon Cable (4860e)P001375 Camera 2 Ribbon Cable (4860e)P001378 Camera Ribbon Cable (3640e)P001401 Aperture TapeP001415 Rear Panel (New enhanced scanners 54” chassis)P001420 Mechanical Camera AssemblyP001427 Rear Panel (New enhanced scanners 42” chassis)P001430 Paper Sensor FlagP001431 54” Stand Cross MemberP001432 42” Stand Cross MemberP001434 Plastic Bezel for rear panels (enhanced models)P001438 Pre-enhanced Digital Board (Single SCSI)P001463 Pinch Roller PlungerP001464 Pinch Roller SpindleP001468 Label Paper Feed Tray (4280)P001486 Camera 1 Ribbon Cable (4280e)P001487 Camera 2 Ribbon Cable (4280e)



P001488 Camera 3 Ribbon Cable (4280e)P001490 Annual Maintenance Kit (42" Chassis)P001491 Annual Maintenance Kit (54" Chassis)P001521 Rear Panel (CopyStation)P001565 Front Extrusion Assy (TE version 42" chassis)P001566 Rear Extrusion Assy (TE version 42" chassis)P001586 Front Extrusion Assy (TE version 54" chassis)P001587 Rear Extrusion Assy (TE version 54" chassis)P001598 Digital Board (Enhanced)P001606 Scanner Run Length Target (New style)P001611 Camera Board (CCD & PCB) Older styleP001863 New Style Camera Board for Series 4P001660 Colortrac Operating Software CD



2. Covers and Panels.

ACTion Imaging Logo:P001361

Front Panel:P001124 For 54" chassisP001327 For 42" chassis

Left Side Panel:P001234

Right Side Panel:P001126

LH End Cover:P001090

LH End Cover:P001090

Lid Cover:P001093 For 54" chassisP001317 For 42" chassis

Paper Tray Guide:P001184

Protectionswitch:P000022

Plastic Bezel:P001434

Rear Panel:P001123 For 54" chassis (older pre-enhanced)P001328 For 42" chassis (older pre-enhanced)

P001415 For 54” chassis (new enhanced scanners)P001427 For 42” chassis (new enhanced scanners)

P001521 For CopyStation

Bottom Panel:P001125 For 54" chassisP001329 For 42" chassis

Pivot Locator Pin:P000469

Chassis Locking Pivot Pin:P001035



3. Boards and Electronics.

Enhanced Digital Board:P001598

Pre-enhanced Digital Board:P001001 Double SCSIP001438 Single SCSINOTE: These digital boards are not interchangeable

and must be replaced with identical boards

Power Supply:P001002

Camera Board Older Style:P001611

New Style Camera board for Series 4:P001863



Ballast Board:P001004 58W ~ For 54" chassisP001005 36W ~ For 42" chassis

Light Sensor Board:P001006

Display Board:P001144

Ballast Board Mount Brkt:P001127Digital Board Mount Brkt:P001128



4. Motors, Belts and Cables.

PSU to Digital Cable Assy:P001150

Camera Ribbon Cable:P001154 Cam1 For 5480eP001155 Cam2 For 5480eP001156 Cam3 For 5480eP001157 Cam1 For 4860eP001158 Cam2 For 4860eP001299 Cam1 For 3680e & 4260eP001300 Cam2 For 3680e & 4260eP001301 Cam1 For 3640eP001486 Cam1 For 4280eP001487 Cam2 For 4280eP001488 Cam3 For 4280e

P001209 Motor Drive AssemblyIncludes P001203 Motor & Cable

Timing Belts:P001011 95 GroovesP001012 256 Grooves



Switch to Ballast Cable Assy:P001148

Light Sensor to Ballast Cable:P001151

Power Inlet to Switch Cable Assy:P001147Switch to PSU Cable Assy:P001149

Ballast to Tube Cable Assy:P001302

Paper Sensor Cable Assy:P001145Digital to Display and Ballast Cable Assy:P001153 For 54" chassisP001303 For 42" chassis



5. Brackets, Lids and Extrusions.

Tube Clamp:P001056.

Light Tubes:P001143 For 54" chassisP000027 For 42" chassis

Microsensor Mounting Brkt:P001069 FrontP001070 Rear

Tube Caps:P001120

Label paper feed tray:P001212 5480P001213 4860P001334 3640P001333 3680P001332 4260P001468 4280Paper Guide Assembly:P001210 For 54" chassisP001341 For 42" chassisNormalisation Target:P001211 For 54" chassisP001338 For 42" chassis

Pinch Rollers:P001242 (2x for each housing, now in white)

Spindle:P001464

Pinch Roller Body:P000325

Plunger:P001463 (2x for each housing, now in blue)



Rear Extrusion Assembly ('TE' Models):P001587 For 54" chassisP001566 For 42" chassis

Front Extrusion Assembly ('TE' models):P001586 For 54" chassisP001565 For 42" chassis

Rear Extrusions (Non 'TE' models):P001208 For 54" chassisP001342 For 42" chassis

Front Extrusion Assembly (Non 'TE' models):P001207 For 54" chassisP001343 For 42" chassis



6. Paper Sensors

Sensor Wire Coupling:P001071

Sensor Flag Wire:P001065

Paper Sensor Flag:P001430

Sensor Arm Assembly:P001066 Front (54" chassis)P001067 Rear (54" chassis)P001311 Front (42" chassis)P001312 Rear (42" chassis)



7. Cameras and Mirrors.

Upper Mirror Bar Assembly:P001141 5480eP001140 4860eP001319 4260eP001322 3680eP001325 3640e

Lower Mirror Bar Assembly:P001142 5480eP001139 4860eP001318 4260eP001321 3680eP001324 3640e

Mirror Bar Top Plate:P001115 Left Hand, all modelsP001116 Right Hand, all modelsP001109 Lever Sub Assembly

Mirror Bar Bottom Plate:P001110 Left Hand, all modelsP001111 Right Hand, all modelsP001109 Lever Sub Assembly

Lens:P001022 6.7F-stop (5480e)P001023 5.6F-stop (all other scanners)

Mechanical Camera Assembly:P001420

Camera Gasket (between Assy & camera board):P001032



8. Stand Assembly

Chassis Locking Pin:P001035

LH Side Member:P001118

Stand Cross Member:P001431 54" ChassisP001432 42" Chassis

RH Side Member:P001119

Stand Casters:P000351

Tube Caps:P001120



9. Miscellaneous.

Scanner Packing Box:P001183 For 54" chassisP001298 For 42" chassis

Paper Hold Down:P001105 For 54" chassisP001315 For 42" chassis

Software CD (including IT8 Target):P001660

Auto-Stitch Target:P001218

Focus & Magnification Target:P001606



10. Recommended Held Spares for Distributors.

For 5480e & 4860e

Part Number Description Quantity

P001002 Power Supply 1

P001004 Ballast Board 58W 2

P001105 Paper Hold down 1

P001143 Light Tubes 2

P001218 Auto-stitch Target 1

P001401 Aperture Tape 1

P001598 Digital Board (Enhanced)* 1

P001611 Camera Board 1

*For non-enhanced kits replace P001598 with P001438 single SCSI Digital Board

For 4280e, 4260e, 3680e & 3640e

Part Number Description Quantity


P001002 Power Supply 1

P001005 Ballast Board 36W 2

P001218 Auto-stitch Target 1


P001401 Aperture Tape 1

P001598 Digital Board (Enhanced)* 1

P001611 Camera Board 1

*For non-enhanced kits replace P001598 with P001438 single SCSI Digital Board

P001490: Annual Maintenance Kit 42" Chassis.

Contains:Part Number Description Quantity


P001011 95 Grooves Timing Belt 1





P001491: Annual Maintenance Kit 54" Chassis

Contains:Part Number Description Quantity





colortrac series 4x - pc

Documents

ballast cable assy

tube cable assy

psu cable assy

spares page

e lower mirror bar assy

e upper mirror bar assy

paper sensors page

cables page