color in the lovable mutt with a heart of gold!
TRANSCRIPT
NOW AVAILABLE ON BLU-RAY™ AND DIGITAL
© 2018 D
isney
FPO
COLOR IN THE LOVABLE MUTT WITH A HEART OF GOLD!
NOW AVAILABLE ON BLU-RAY™ AND DIGITAL
© 2018 D
isney
FPO
CONNECT THE DOTS AND COLOR THE LOVINGLY PAMPERED COCKER SPANIEL
NOW AVAILABLE ON BLU-RAY™ AND DIGITAL
© 2018 D
isney
FPO
WORD SEARCH. LOOK UP, DOWN, ACROSS AND DIAGONALLY!
FOR MORE FUN VISIT HTTP://LOL.DISNEY.COM/GAMES/MOBILE-APPS
NOW AVAILABLE ON BLU-RAY™ AND DIGITAL
FPO
© 2018 D
isney
A-MAZ-ING FUN!
NOW AVAILABLE ON BLU-RAY™ AND DIGITAL
FPO
© 2018 D
isney
ACTIVITY FUN!
NOW AVAILABLE ON BLU-RAY™ AND DIGITAL
FPO
© 2018 D
isney
MORE ACTIVITY FUN!
ON DIGITAL FEBRUARY 20ON BLU-RAY™ FEBRUARY 27
PRINT » CUT OUT » BUILD
© 2018 D
isney
PRINT, CUT OUT AND BUILD LADY1 of 4
Re-create this clever 1950s paper sculpture from
the original theatrical release of Disney’s
LADY AND THE TRAMP.
PAPER LADY
Print the following pages on card stock or photo paper. Have an adult help you carefully cut out all the shapes along the dotted lines. Follow the steps below. Refer to diagram (bottom left). Head: 1) Roll paper shape horizontally into a cone, matching the top right corner to the overlap point on the top left. Attach with tape or staples. Ears: 2) Fold the ear shapes down along the line at the top. Set aside. Muzzle and nose: 3) Bend the muzzle piece into a u-shape, then tape down the tabs of the front shape to secure. 4) Bend the nose bridge piece into a u-shape and attach the top portion of the nose with glue stick. 5) Attach the nose bridge piece on top of the muzzle piece with glue stick or tape.Eyes: 6) Glue each of the two sets of eyes together and curl the fringe cuts on top of eye patches with your finger or a pencil. Set aside.
Collar and tags: 7) Attach the two blue strips with tape to make one long collar. Fold the thin gold strip along the lines and loop through the square tag. Attach the tag to the collar and secure from behind with tape.
Put it all together: Use the picture as a guideRecommended order of assembly: Fit collar around cone and attach into position from behind with tape. Attach muzzle/nose piece into position with tape along the back of the jaw. Set eye pieces into position by slipping them down behind the attached muzzle and affix with glue stick. Hang ears on both sides of the head and secure with tape to the inside of the cone.
Display your Paper Lady for everyone to enjoy!
Directions Adult Supervision Required
ON DIGITAL FEBRUARY 20ON BLU-RAY™ FEBRUARY 27
© 2018 D
isney
PRINT, CUT OUT AND BUILD LADY2 of 4
Ove
rlap
poin
t »
ON DIGITAL FEBRUARY 20ON BLU-RAY™ FEBRUARY 27
© 2018 D
isney
PRINT, CUT OUT AND BUILD LADY3 of 4
ON DIGITAL FEBRUARY 20ON BLU-RAY™ FEBRUARY 27
© 2018 D
isney
PRINT, CUT OUT AND BUILD LADY4 of 4