Collect your work from the front table and your folder from the desk.

Hole punch your work.

On your initial ideas, circle, mark or label your favourite element from

each design

Learning Objectives

• To be able to name the four production processes

• To explain how each production processes is used

• To complete your final design for your films logo

https://www.youtube.com/watch?v=lAyhCXNMILY

• Complete your worksheet as the video plays!

Type of Production Method

Numbers Made

Advantages Disadvantages

Cost of setting up the production process

Cost of making individual item

Examples

1 Easy to set upEasy to Change

Very Low

Machines are expensive to buy and set up

Medium

10,000+ Cost of individual item is low

Low

Continuous Cannot change if demand falls

Type of Production Method

Numbers Made

Advantages Disadvantages

Cost of setting up the production process

Cost of making individual item

Examples

One off 1 Easy to set upEasy to Change

Very high individual cost

Very Low Very High Paintings, sculptures

Batch 1-10,000 Adaptable process of making so quite easy to change

Machines are expensive to buy and set up

Medium Medium Books, perfume bottles

Mass 10,000+ Cost of individual item is low

Even more expensive than batch to set up

High Low Cars

Continuous Millions Easy to make the same item cheaply to a high standard

Cannot change if demand falls

Very High Very low Paper production, blank packaging such as cans

A Wedding Dress

One off

Blank Paper

Continuous

Dog Food

Continuous

Cupcakes

Batch

White Sports Socks

Mass

Now, you will continue to work on your logos

• Using your initial ideas, complete your final design for your films logo

• Make sure you consider how it will be used in your poster – use your homework to see how other films in your genre do it

• You have 40 minutes to do this, so take your time. Take care with your lines and rendering

• Isometric and dotted underlays are available for you if you need them.

• Remember to annotate with WHY you have made each decision. Why have you chosen the typeface, that shape, those colours? How does it link to your synopsis? Use ACCESSFM

Success Criteria An original idea – like

nothing I’ve seen before! It must reflect the genre

of the film It must appeal to target

market Reflect a plot pointUse an element of each

initial idea Higher level Part of it must be

rendered (adding shade and texture)

A part of the logo drawn in 3D

Success Criteria An original idea – like

nothing I’ve seen before! It must reflect the genre

of the film It must appeal to target

market Reflect a plot pointUse an element of each

initial idea Higher level Part of it must be

rendered (adding shade and texture)

A part of the logo drawn in 3D

Now swap with someone on the next tableUnder their design write• Three things they’ve done well• Two things they could improve

Now , count up how many success criteria they’ve met –and give them a grade

A* 7 D 3

A 6 E 2

B 5 F 1

C 4 U 0

Blank Can

Continous

Newspapers

Batch

Branded Packaging

Mass

Leaflets

Batch

Paintings

One off

iPhones

Mass

Books

Batch

One off One off One off

One off One off One off

One off One off One off

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

when only one product is made at a time. Every product is different so it is labour intensive. Products may be made by hand or a combination of hand and machine methods.

BatchProduction

BatchProduction

BatchProduction

BatchProduction

BatchProduction

BatchProduction

BatchProduction

BatchProduction

BatchProduction

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

when a small quantity of identical products are made. Batch production may also be labour intensive, but jigs and templates are used to aid production. Batches of the product can be made as often as required. The machines can be easily changed to produce a batch of a different product.

MassProduction

MassProduction

MassProduction

MassProduction

MassProduction

MassProduction

MassProduction

MassProduction

MassProduction

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

when hundreds of identical products are made, usually on a production line. Mass production often involves the assembly of a number of sub-assemblies of individual components. Parts may be bought from other companies. There is usually some automation of tasks (eg by using Computer Numerical Control machines) and this enables a smaller number of workers to output more products.

ContinuousProduction

ContinuousProduction

ContinuousProduction

ContinuousProduction

ContinuousProduction

ContinuousProduction

ContinuousProduction

ContinuousProduction

ContinuousProduction

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.

production is when many thousands of identical products are made. The difference between this and mass production is that the production line is kept running 24 hours a day, seven days a week to maximise production and eliminate the extra costs of starting and stopping the production process. The process is highly automated and few workers are required.