coliere raci
TRANSCRIPT
-
8/11/2019 Coliere RACI
1/24
SPACERS FOR PIPELINES
CASED CROSSINGS
12
-
8/11/2019 Coliere RACI
2/242 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
RACI was founded in 1952, pipeline division for spacers is the result of 30 years of experience.According to our philosophy, the keys to the continuous success of our products are: our capacityto respond to any specific customer or market request, our keen attention to details and thebalanced interaction between quality and service.
This philosophy implies that a lot of attention has always been paid to the research carried outby RACI R&D dept. This big consideration for advanced research has been rewarded by both theincomparable performance of our spacers and by the excellent world wide reputation of RACI.
-
8/11/2019 Coliere RACI
3/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 3
Introduction
must ensureelectrical insulationbetween the carrierpipe and the
casing pipe.
Raci spacers havebeen applied in the
main worldwidecrossings
must guarantee aneasy insertion of thecarrier into thecasing pipe
preventing damageof carrier pipecoating.
must permit to betightly fastenedonto carrier pipesin order to avoid
horizontalmovements duringinsertion.
must be madeof material whichdoes not conductelectricity and which
ensures permanentresistance tochemical corrosion.
must be resistant tomechanical andthermal shocks andstresses, particularly
those that occurduring both theinstallation and theinserting operation.
In many countries pipelines crossing or running parallel to highwaysand railways shall be protected by casing. Spacers are used in order to separate thecarrier pipeline from the casing. Raci casing Spacers isolate water, sewer and gaspipelines from casing simply and effectively. Insulators are required to separate casingand carrier pipes according to the following requirements:
spacers
-
8/11/2019 Coliere RACI
4/244 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
Spacers aremanufacturedentirely out ofhigh densitypolyethylene (HDPE).No metal boltsor attachments arerequired.
The modular systemwhich permits tocompose insulatorrings allows spacersto be used on awide pipe diameterrange thereforereducing inventorycosts.
Spacers arequickly and easilyassembled bymanually fittingelements one intothe other.
The tooth insertionmethod allowson site adjustmentsto fit a wide rangeof pipe diameters.
A low fric tioncoefficientguarantees an easyinsertion into thecasing.
Spacers aredesigned and testedto maintaincontinuous and
long term supportfor the carrier pipeand its contents.
Spacers provide aconstant projectionaround the entirecircumference of
the carrier pipe.
Spacersprovide long termprotection fromcorrosion.
Spacers can beinstalled onsteel-coated pipes,concrete pipes,
ductile iron pipesor plastic pipes.
Special applications
For applications with a continuous temperature above 60 C Nylon spacers are available.Customized versions can also be manufactured with other types of polymers accordingto mechanical and thermal requirements.
Raci spacer elements are the result of a deep structural analysis and of computer-assisteddesign and manufacturing which represent the best compromise between mechanical
resistance and material used. No metallic parts are involved for their assembly.Each element represents a flexible section with a toothed male strap at one endand an appropriate toothed female slot on the other end.This design allows on site adjustments for variances within the O.D. range and permitsto cover all types of pipes within the global range which goes from 30 to 3414 mm.
The advantages of RACI spacers
Spacers are divided into six models which address a wide range of pipe sizes.All of the elements are designed according to different applications.They must in fact ensure different static and dynamic characteristics in orderto guarantee the safest job on site.Each grouping offers varying support heights which allow spacers to clear bell joints,flanges, couplings or simply to offer a better centring.
The available height range goes from 15 to 130 mm.
-
8/11/2019 Coliere RACI
5/24
Selection guidelinesBasic dimensions
Exact carrier pipe Outside Diameter(O.D.) including the coating film
Exact casing pipeInternal Diameter (I.D.)
Exact bell, flangeor coupling O.Db (bell)
O.D. I.D. O. D. I .D.O.DbBELL
Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 5
HPDE characteristics
In order to choose the right element you only need the O.D. carrier pipe.
Yield strength * > 22 N/mm2 UNI EN ISO 527-2
Tensile strength* > 16 N/mm2 UNI EN ISO 527-2Elongation at break * > 400% UNI EN ISO 527-2
Hardness shore D 64 ASTM D 2240
minimum working temperature -20 C
minimum stocking temperature -20 C
Dielectric strength > 37 kV/mm ASTM D 149/64
UVL stabilization good
* on test specimen with extruded material
TABLE Aphysical
characteristicsof High Density
Polyethylene
-
8/11/2019 Coliere RACI
6/24
A
B
6 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
TABLE B3elements A/B
TABLE B1elements S/T
TABLE B2elements C/D/I
S
T
D
C
I
55
60
68
85
90
98
118
125
140
158
178
200215
239
245
64
70
77
98
106
116
132
140
158
180
200
240242
272
281
2,17
2,36
2,68
3,35
3,54
3,86
4,65
4,92
5,51
6,22
7,01
7,878,46
9,41
9,65
2,52
2,76
3,03
3,86
4,17
4,57
5,20
5,51
6,22
7,09
7,87
9,459,53
10,71
11,06
-
1
2
-
1
3
-
1
4
2
5
-6
6
7
2
1
-
3
2
-
4
3
-
3
-
7-
1
-
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
1,5
1,5
1,5
1,51,5
1,5
1,5
2,0
2,0
2,0
2,0
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,51,5
1,0
1,0
6,5
6,5
6,5
6,5
6,5
6,5
6,5
6,5
5,0
5,0
5,0
5,05,0
5,0
5,0
6,5
6,5
6,5
6,5
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,05,0
3,5
3,5
MIN(mm)
MAX(mm)
MIN(in)
MIN(in) A B GAS
(m)
WATER GAS
(ft)
WATER
RECOMMENDEDSPACING BETWEEN
INSULATORS
CARRIER PIPE O.DELEMENTSTO MAKE
ONE INSULATOR
30
38
59
69
76
88
103108
115
121
133
141
147
153
35
43
68
75
84
102
107114
120
132
140
146
152
168
1,18
1,50
2,32
2,72
2,99
3,46
4,064,25
4,53
4,76
5,24
5,55
5,79
6,02
1,38
1,69
2,68
2,95
3,31
4,02
4,214,49
4,72
5,20
5,51
5,75
5,98
6,61
1
-
2
1
-
3
21
-
4
3
2
1
-
-
1
-
1
2
-
12
3
-
1
2
3
4
2,0
2,0
2,0
2,0
2,0
2,0
2,02,0
2,0
1,5
1,5
1,5
1,5
1,5
2,0
2,0
2,0
2,0
2,0
2,0
1,51,5
1,5
1,5
1,5
1,5
1,5
1,5
6,5
6,5
6,5
6,5
6,5
6,5
6,56,5
6,5
5,0
5,0
5,0
5,0
5,0
6,5
6,5
6,5
6,5
6,5
6,5
5,05,0
5,0
5,0
5,0
5,0
5,0
5,0
MIN(mm)
MAX(mm)
MIN(in)
MIN(in) S T GAS
(m)
WATER GAS
(ft)
WATER
RECOMMENDEDSPACING BETWEEN
INSULATORSCARRIER PIPE O.D
ELEMENTSTO MAKE
ONE INSULATOR
42
58
81
100
134
171
52
80
99
133
170
200
1,65
2,28
3,19
3,94
5,28
6,73
2,05
3,15
3,90
5,24
6,69
7,87
-
1
-
1
1
-
1
-
-
1
-
-
1,5
1,5
1,5
1,5
1,0
1,0
1,5
1,5
1,0
1,0
1,0
1,0
5,0
5,0
5,0
5,0
3,0
3,0
5,0
5,0
3,0
3,0
3,0
3,0
MIN(mm)
MAX(mm)
MIN(in)
MIN(in) C
-
-
1
-
1
2
D IGAS
(m)
WATER GAS
(ft)
WATER
RECOMMENDEDSPACING BETWEEN
INSULATORSCARRIER PIPE O.D
ELEMENTSTO MAKE
ONE INSULATOR
Table of elements
Elements needed to make one insulator ring
-
8/11/2019 Coliere RACI
7/24
TABLE B4elements F/G
TABLE B5
elements M/N and P/Q
221269
321
367
421
466
531
631
731
831
910
1031
1160
1361
1601
18002111
2431
2861
268320
366
420
465
530
630
730
830
910
1030
1159
1360
1600
1799
21102430
2860
3414
8,710,59
12,64
14,45
16,57
18,35
20,91
24,84
28,78
32,71
35,83
40,59
45,67
53,58
63,03
70,8783,11
95,71
112,64
10,5512,6
14,41
16,54
18,31
20,87
24,8
28,74
32,68
35,83
40,55
45,63
53,54
62,99
70,83
83,0795,67
112,6
134,41
23
3
4
4
5
6
7
8
9
10
11
13
15
17
2023
27
32
1-
1
-
1
-
-
-
-
-
-
-
-
-
-
--
-
-
2,52,5
2,5
2,5
2,5
2,5
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,01,5
1,5
1,5
2,52,5
2,5
2,0
2,0
2,0
2,0
2,0
1,8
1,8
1,5
1,5
1,2
1,2
1,0
0,80,6
0,5
0,4
8,08,0
8,0
8,0
8,0
8,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,05,0
5,0
5,0
8,08,0
8,0
7,0
7,0
7,0
7,0
7,0
6,0
6,0
5,0
5,0
4,0
4,0
3,5
2,62,0
1,6
1,3
MIN(mm)
MAX(mm)
MIN(in)
MIN(in)
E HGAS
(m)
WATER GAS
(ft)
WATER
TABLE B6elements E/H
G
F
N
M
H
E
(*) N.A. NOT APPLICABLE FOR P AND Q TYPE
Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 7
RECOMMENDEDSPACING BETWEEN
INSULATORSCARRIER PIPE O.D
ELEMENTSTO MAKE
ONE INSULATOR
143
169
202
228
253
287
312
338
396
422
506
591675
760
850
168
201
227
252
286
311
337
395
421
505
590
674759
915
1015
5,63
6,65
7,95
8,98
9,96
11,3
12,28
13,31
15,59
16,61
19,92
23,2726,57
29,92
33,46
6,61
7,91
8,94
9,92
11,26
12,24
13,27
15,55
16,57
19,88
23,23
26,5429,88
36,02
39,96
1
2
1
2
3
2
3
4
4
5
6
78
9 (*)
10(*)
1
-
2
1
-
2
1
-
1
-
-
--
- (*)
- (*)
2,5
2,5
2,5
2,5
2,5
2,0
2,0
2,0
2,0
2,0
2,0
2,01,5
1,5
1,5
2,5
2,5
2,5
2,0
2,0
2,0
2,0
2,0
2,0
2,0
1,5
1,51,5
1,0
1,0
8,0
8,0
8,0
8,0
8,0
7,0
7,0
7,0
7,0
7,0
7,0
7,05,0
5,0
5,0
8,0
8,0
8,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
5,0
5,05,0
3,5
3,5
MIN(mm)
MAX(mm)
MIN(in)
MIN(in)
M / P N / QGAS
(m)
WATER GAS
(ft)
WATER
RECOMMENDED
SPACING BETWEENINSULATORSCARRIER PIPE O.D
ELEMENTS
TO MAKEONE INSULATOR
92
116153
189
225
261
296
314
377
447
115
152188
224
260
295
313
376
446
528
3,62
4,576,02
7,44
8,86
10,28
11,65
12,36
14,84
17,60
4,53
5,987,40
8,82
10,24
11,61
12,32
14,80
17,56
20,79
1
22
3
3
4
4
5
6
7
1
-1
-
1
-
1
-
-
-
2,5
2,52,5
2,5
2,0
2,0
2,0
2,0
2,0
2,0
2,5
2,52,0
2,0
2,0
2,0
2,0
1,5
1,5
1,5
8,0
8,08,0
8,0
7,0
7,0
7,0
7,0
7,0
7,0
8,0
8,07,0
7,0
7,0
7,0
7,0
5,0
5,0
5,0
MIN(mm)
MAX(mm)
MIN(in)
MIN(in) F G GAS
(m)
WATER GAS
(ft)
WATER
RECOMMENDEDSPACING BETWEEN
INSULATORSCARRIER PIPE O.D
ELEMENTSTO MAKE
ONE INSULATOR
-
8/11/2019 Coliere RACI
8/24
The spacing of the rings must ensure that the carrier pipe is fully supported throughoutits length, this calculation is related to the carrying capacity of the elements and it isresumed in the tables of range. To ensure against the effects of differential loading atthe entrance and exit points of the casing, two rings are to be provided at the beginningand at the end of the crossing segment, regardless the sizes of the pipe.Where mechanically joined pipes, flanges, couplings or bells are involved, rings must beinstalled within 0,3 m on each side of the bell.
Rings spacing
Simplified choices
Length of crossing and linearweight of filled carrier pipe
up to 3 S/T C/D/I -from 3 to 5 A/B S/T C/D/I
from 5 to 12 F/G A/B M/N
from 12 to 24 M/N E/H F/G
over 24 E/H M/N -
CARRIER PIPE DN (inches) ALTERNATIVE SOLUTIONSTABLE C
suggested choices
for all carrier pipeO.D. values
RECOMMENDED SOLUTION
The exact number of elements N2 comes from the following formula:
The total number of elements for each crossingNtot
is:
How to calculate the number of rings
N2 =LI
+ 3L crossing
length
I spacing as pertables pg. 6-7
N2 Requiredrings
Ntot = N1 x N2 N1elements to make one insulatoras per tables pg. 6-7
8 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
-
8/11/2019 Coliere RACI
9/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 9
How to choose the height of the elements
The basic calculation in order to define maximum spacer height is the following:
double spacerat each end bell casing
( carrier pipe OD ) + ( 2x height of element ) + ( clearance 12 to 15 mm ) < ( casing ID )
In case of carrier pipes made of ductile iron or pipes with flanged junctions, the heightof each element must be above the mechanical joint (bell or flange) too.
( carrier pipe OD ) + ( 2x height of element ) > ( bell O.D. + clearance 20 mm )
Exact carrier pipeO.D. includingthe coating film
Exact casingpipe I.D.
Exact bell,flange or couplingO.D. (bell)
The spacers elements are also available in different heights except for the C-D-I-S-Tmodel, in order to either clear the mechanical joints or simply to obtain a better centring
between carrier and casing pipes.
Usefullength
(mm)
(in)
Width(mm)
(in)
Height(mm)
(in)
Carryingcapacity
Carryingcapacity
94 - 110 119 - 135 113 - 128 95 - 110 180 - 250 240 - 310 130 - 160
3,7 - 4,33 4,68 - 5,32 4,45 - 5,04 3,74 - 4,33 7,08 - 9,84 9,45 - 12,2 5,12 - 6,30
85 100 63
3,35 3,94 2,48
20 19 - 36 - 50 15
0,79 0,75 - 1,42 - 1,97 0,59
ELEMENTS S T A B C D ITABLE D
technical datas
(Kg)
(lbs)
(Kg)(lbs)
execution HDPE (23 C)
execution NYLON or POLYPROPILENE(100 C)
110 180 100
242 397 220,46
20 32 1844 71 40
Usefullength
(mm)
(in)
Width(mm)
(in)
Height
(mm)
(in)
Carrying
capacity
Carryingcapacity
197 - 237 91 - 129 265 - 320 185 - 240 280 - 335 130 - 185 265 - 320 185 - 240
7,76 - 9,33 3,58 - 5,08 10,43 - 12,60 7,28 - 9,45 11,02 - 13,19 5,12 - 7,28 10,43 - 12,60 7,28 - 9,45
130 180 225 180
5,12 7,09 8,86 7,09
25 - 41 18 - 25 - 36 - 41 25 - 41 - 60 - 75110 - 12060 - 75 50 - 75 - 90 90 - 110 - 130
0,98 - 1,61 0,71 - 0,98 - 1,42 - 1,61 0,98 - 1,61 - 2,36 - 2,954,33 - 4,722,36 - 2,95 1,97 - 2,95 - 3,54 3,54 - 4,33 - 5,12
ELEMENTS F G M N E H P Q
(Kg)
(lbs)
(Kg)
(lbs)
execution HDPE (23 C)
execution NYLON or POLYPROPILENE(100 C)
500 1000 2750 1000
1102 2204 6061 2204
80 180 500 180
176 397 1102 397
-
8/11/2019 Coliere RACI
10/24
Tape for plastic pipesIn case of plastic carrier pipe (PVC, PE and similar), it is suggested to tape the contact
area between the ring insulator and the carrier pipe, this precaution will avoid anyhorizontal sliding of the rings on the carrier pipe during the inserting operations.The following table resume the required quantity of tape for each insulating ringreferred to the different size of pipes.
Please note that the above quantities concerning tape consumption are calculated considering:up to DN 6 rolls height 50 mm - for DN > 6 rolls height 100 mm
Heavy-duty applicationsIn case of very long crossings >150 m or for very heavy carrier pipes it is also possible
to increase the frequency of the insulating rings, or consider the adoption of reinforcedelements. These elements are designed with an increased wear thickness.However, in case of heavy duty applications, a more careful analysis and calculation isnecessary, taking into account the particular conditions on site.For these cases we recommend to ask for Raci technical support.
TABLE Erequired quantity of selfamalgamating tape (m)
1 m = 39,37 in2
4
68
10
12
16
20
24
30
32
36
40
42
48
CARRIER PIPEDN
ELEMENTS
C/D/I - S/T - A/B
requiredquantity (m)
requiredquantity (in)
requiredquantity (m)
requiredquantity (in)
requiredquantity (m)
requiredquantity (in)
F/G M/N - P/Q - E/H
1 m 1 m 1 m1,5 m
200 m
400 m Example
10 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
0,45
0,75
1,20,75
-
-
-
-
-
-
-
-
-
-
-
1,77
2,95
4,722,95
-
-
-
-
-
-
-
-
-
-
-
1,65
2,4
1,51,8
2,1
2,7
3,3
-
-
-
-
-
-
-
-
6,5
9,45
5,917,09
8,27
10,63
12,99
-
-
-
-
-
-
-
-
-
-
3,452,7
3,3
4,05
5,25
6,6
7,8
9,75
10,35
11,7
12,9
13,5
15,45
-
-
13,5810,63
12,99
15,94
20,67
25,98
30,71
38,39
40,75
46,06
50,79
53,15
60,83
-
8/11/2019 Coliere RACI
11/24
RACI quality control
Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 11
All Raci tests are carried out in our internal laboratory according to the UNI EN 527standard. For each production batch, we test 10 specimens which verify complianceto our standards. (see TABLE A).
When the mechanical characteristics are satisfied, we guarantee the productionof the specific batch by marking every elements with the corresponding batch
number. This allows to trace the story of each element.During the production phase, all pieces are tested according
to their projects drawing.Before packaging, visual inspection ensures that the overallquality reaches our standards.RACI quality dept. also provide sample-surveys by installing
a few elements on a pipe and checking them throughan ageing test which is carried out in the climatic chamber.
This test will last for 15 days. The temperature excursion rangewill be from -20 C to +80 C. After this test, samples will be
checked against creep or any other damage.
-
8/11/2019 Coliere RACI
12/2412 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
13
Instruction for assembly
Insert the male button-strap into the slot of the next pieces until you have assembled the required numberof elements to circle the pipe in order to create a belt of elements. Look at the table of elements (pg. 6-7).
1 2
OK
Wrap the spacer belt around the pipe and close theends by hand, inserting the male butt-strap into theslot to make a complete ring.
Start to fasten the ring around the pipe,using the clamp tight each element up to the endof third tooth.
3 4
OK
2
-
8/11/2019 Coliere RACI
13/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 13
4
For the final clamping around the pipe tight gradually, in order to obtain as much as possible an omogeneousnumber of engaged teeth.
5
OK
6
OK
Do not use extension lever to increase the torque, you could break some components of the clamp.The clamp has been studied in order to guarantee the appropriate fastening only by using the original lever.
7
NO
5
S/T
C/D/I
F/G
M/N
E/H h 25-90
E/H h 130
* clamp type 5
can be used also for elemnts F/G
3
3
1
5*
2
4
ELEMENTS CLAMPS
EEE5
EEE5
EEE1
EEE7B
EEE4
EEE6
CODETABLE F
clamp types
-
8/11/2019 Coliere RACI
14/2414 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
Casing end seal
Casing end seal Espansit type Z
Epansit end seal type Z is entirely made of synthetic rubber (EPDM) and is the mostfunctional, simple and cheap solution for sealing the clearances between the casingand the carrier pipe at the end of the pipe.
End seal type Z have a tolerance of 10% on their O.D. values (both casingand carrier pipe). If this tolerance is not enough for the application
we recommend to choose a higher size, therefore increasing the pipe O.D.with wrappings of self-amalgamating P.I.B. tape.This type also guarantees good sealing for applications with eccentriccarrier pipe.
It is easily fixed onto the pipes by means of stainless steel straps.It is only suitable for NEW installations.
stainless steel straps ESPANSIT
end seal
carrier pipedouble spacerat each endcasing
Once the carrier pipe has been completely introduced inside the casing,two end seals are necessary.The different types of end seals which belong to our range guarantee a safe,clean and cost-effective solution for both new and pre-existing installation.Casing end seals are easy and fast to install.The material used is highly resistant to ageing and it offers excellent mechanicalstrength. There are four types of end seal:
Espansit end seal,
wave type Z
Conic end seal,
Espansit frustumtype C
Ekf type end seal Heat shrinkable
end seal
-
8/11/2019 Coliere RACI
15/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 15
This kind of casing is available in almost every size, and the conical design
compensates for a possible eccentric position of the pipes.The end seals are made of CR-SBR black rubber.The Espansit type C is also available in the OPEN version.The end seal consists of a rubber sheet which can be folded around
the pipelines and then pasted on to the edges.
Casing end seal EKF type
Its easily adaptable shape allows the seal EKF type to be cut accordingto the carrier pipe diameter. This makes it suitable for a huge combinationof carrier and casing pipes. The casing frustum cone shaped end sealEKF type is made of a 3-4 mm thick high quality EPDM rubber.On the outer seal surface different sizes are marked to simplifythe cutting operation. The seal must be fixed to both pipeswith clamping straps which are applicable to all diametersand are included in the kit. Two casing pipe seats areprovided for each end seal EKF size. This solutionreduces the need to keep many different sizes on stock.
Heat shrinkable CSK end seal typeThe two fundamental data of heat shrinkable sleeves are their diameter before shrinkingand the smallest diameter they can reach after shrinking.The outside diameter of both the casing O.D. and of the carrier pipe O.D. must beincluded in the shrinking range of the heat shrinkable sleeve.Complete sealing is guaranteed in this way.The CSK end seal is made of an open band which has to be wrapped around the pipewith its own closing patch.
plastic support heatshrinkable sleeve
carrier pipedouble spacer
at each endcasing
Casing end seal Espansit type C
-
8/11/2019 Coliere RACI
16/2416 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
C
D
I
S
T
A
A
A
B
B
B
F
F
F
F
G
G
G
M
M
MM
M
M
N
N
N
N
N
E
E
E
E
EE
E
E
H
H
H
H
H
H
H
P
P
QQ
120
100
150
100
80
140
110
80
160
130
90
150
100
70
60
50
60
40
100
60
5540
30
25
100
70
50
35
30
50
26
26
18
1412
10
8
60
58
40
30
26
22
18
24
20
3026
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
40 x 30 x 35
40 x 30 x 35
40 x 30 x 35
60 x 40 x 50
60 x 40 x 50
60 x 40 x 5060 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 5060 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 50
60 x 40 x 5060 x 40 x 50
5
6
5
4
4
7
7
6
6
5
5
24
19
16
17
10
7
5
29
22
2318
17
17
22
18
15
12
12
30
20
22
17
1616
15
12
23
24
18
15
14
12
11
16
15
1312
4
5
4
3
3
6
6
5
5
4
4
22
17
14
15
9
6
4
27
20
2116
15
15
20
16
13
11
10
28
18
20
15
1414
13
10
21
22
16
13
12
10
9
14
13
1110
ELEMENTS TYPE SPACERS FOR CARTONCARTON DIMENSIONS
(cm)
15
15
15
20
20
19
36
50
19
36
50
25
41
60
75
25
41
60
18
36
4150
75
90
18
36
50
75
90
25
41
41
60
7590
110
130
25
41
60
75
90
110
130
110
120
110120
HEIGHT (mm)
CDC
CDD1
CDI1
CDS1
CDT
CDA19
CDA36
CDA50
CDB19
CDB36
CDB50
CDF25
CDF41
CDF60
CDF75
CDG25
CDG41
CDG60
CDM18
CDM36
CDM41CDM50
CDM75
CDM90
CDN18
CDN36
CDN50
CDN75
CDN90
CDE25
CDE41
CDE41R
CDE60
CDE75CDE90
CDE110
CDE130
CDH25
CDH41
CDH60
CDH75
CDH90
CDH110
CDH130
CDP110
CDP120
CDQ110CDQ120
CODE
How to order
In order to simplify stock management we only accept orders for complete boxes
GROSS NET
SPACERS
WEIGHT FOR CARTON (kg)
-
8/11/2019 Coliere RACI
17/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 17
SIZE (inches)DIMENSIONS (mm)
A x B x H CODE TYPE
2X4
2X6
2X6
21/2X6
21/2X6
3X6
3X6
3X7
3X8
3X8
3X10
3X12
31/2X8
4X6
4X8
4X10
4X12
41/2X8
41/2X10
5X8
5X95X10
6X10
6X10
6X12
6X12
6X14
6X16
8X10
8X12
8X14
60x114x75
64x160x78
65x170x78
80x160x75
80x170x78
95x159x75
92x170x75
100x195x75
90x220x75
97x225x78
90x275x80
90x346x80
108x219x75
118x162x75
120x220x75
112x275x80
110x346x80
138x219x75
130x290x80
152x220x75
155x235x75145x275x78
159x273x75
173x273x75
159x324x80
175x330x75
168x365x80
160x406x80
225x280x75
200x324x75
230x355x75
EZ020X4
EZ020X6R
EZ020X6
EZ021X6R
EZ021X6
EZ030X6R
EZ030X6
EZ030X7
EZ030X8R
EZ030X8
EZ030X10
EZ030X12
EZ031X8
EZ040X6
EZ040X8
EZ040X10
EZ040X12
EZ041X8
EZ041X10
EZ050X8
EZ050X9EZ050X10
EZ060X10R
EZ060X10
EZ060X12R
EZ060X12
EZ060X14
EZ060X16
EZ080X10
EZ080X12
EZ080X14
1
1
1
1
1
1
1
2
1
1
2
3
2
1
1
2
3
1
2
1
12
1
1
2
1
2
3
1
1
1
SIZE (inches)DIMENSIONS (mm)
A x B x H CODE TYPE
8X16
8X18
9X12
10X12
10X14
10X14
10X16
10X16
10X20
10X22
12X16
12X18
12X20
12X22
14X18
14X20
16X20
16X22
16X24
20X24
20X2622X26
24X30
24X32
26X30
26X32
30X36
32X38
32X40
34X40
36X42
225x410x80
225x457x80
224x325x75
260x330x75
250x356x75
280x360x75
280x410x75
280x410x75
273x508x80
275x556x90
335x410x75
325x457x90
324x508x80
348x579x80
360x457x75
360x508x80
406x508x90
410x558x90
400x609x90
508x610x75
508x660x75558x660x90
615x760x90
600x812x90
668x760x75
660x813x157
765x915x150
813x965x157
825x1018x160
863x1015x160
914x1066x160
EZ080X16
EZ080X18
EZ090X12
EZ10X12
EZ10X14R
EZ10X14
EZ10X16
EZ10X16-2
EZ10X20
EZ10X22
EZ12X16
EZ12X18
EZ12X20
EZ12X22
EZ14X18
EZ14X20
EZ16X20
EZ16X22
EZ16X24
EZ20X24
EZ20X26EZ22X26
EZ24X30
EZ24X32
EZ26X30
EZ26X32
EZ30X36
EZ32X38
EZ32X40
EZ34X40
EZ36X42
2
2
1
1
1
1
1
2
3
3
1
1
2
2
1
1
1
1
2
1
21
1
2
1
1
1
1
1
1
1
A
B
H
A
B
H
A
H
B
Stainless steel straps included
TYPE 1 TYPE 2 TYPE 3
ESPANSIT END SEAL Type Z
-
8/11/2019 Coliere RACI
18/2418 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
SIZE(inches)
DIMENSIONS(mm)
CODE FORCLOSED TYPE
CODE FOROPENED TYPE
1x1,5
1x2
1x2,5
1x3
1x4
1x5
1x6
1x8
1,5x2
1,5x2,5
1,5x3
1,5x4
1,5x5
1,5x6
1,5x8
2x2,5
2x3
2x4
2x5
2x6
2x82x10
2x12
2x14
2x16
2,5x3
2,5x4
2,5x5
2,5x6
2,5x8
2,5x10
2,5x12
2,5x14
2,5x163x4
3x5
3x6
3x8
3x10
3x12
3x14
3x16
3x18
3x20
3x22
3x24
3x264x5
4x6
4x8
32x53x220
32x66x220
32x84x240
32x98x250
32x126x270
32x154x290
32x185x310
32x241x350
46x66x210
46x84x230
46x98x240
46x126x260
46x154x280
46x185x300
46x241x340
57x84x220
57x98x230
57x126x250
57x154x270
57x185x290
57x241x33057x300x370
57x356x410
57x391x430
57x447x470
72x98x220
72x126x240
72x154x260
72x185x280
72x241x320
72x300x360
72x356x400
72x391x420
72x447x46084x126x230
84x154x250
84x185x270
84x241x310
84x300x350
84x356x390
84x391x420
84x447x450
84x503x490
84x559x530
84x615x570
84x671x610
84x726x650109x154x230
109x185x250
109x241x290
E010X011CC
E010X020CC
E010X021CC
E010X3CC
E010X4CC
E010X5CC
E010X6CC
E010X8CC
E011X020CC
E011X021CC
E011X3CC
E011X4CC
E011X5CC
E011X6CC
E011X8CC
E020X021CC
E020X3CC
E020X4CC
E020X5CC
E020X6CC
E020X8CCE020X10CC
E020X12CC
E020X14CC
E020X16CC
E021X3CC
E021X4CC
E021X5CC
E021X6CC
E021X8CC
E021X10CC
E021X12CC
E021X14CC
E021X16CCE030X4CC
E030X5CC
E030X6CC
E030X8CC
E030X10CC
E030X12CC
E030X14CC
E030X16CC
E030X18CC
E030X20CC
E030X22CC
E030X24CC
E030X26CCE040X5CC
E040X6CC
E040X8CC
E010X011CO
E010X020CO
E010X021CO
E010X3CO
E010X4CO
E010X5CO
E010X6CO
E010X8CO
E011X020CO
E011X021CO
E011X3CO
E011X4CO
E011X5CO
E011X6CO
E011X8CO
E020X021CO
E020X3CO
E020X4CO
E020X5CO
E020X6CO
E020X8COE020X10CO
E020X12CO
E020X14CO
E020X16CO
E021X3CO
E021X4CO
E021X5CO
E021X6CO
E021X8CO
E021X10CO
E021X12CO
E021X14CO
E021X16COE030X4CO
E030X5CO
E030X6CO
E030X8CO
E030X10CO
E030X12CO
E030X14CO
E030X16CO
E030X18CO
E030X20CO
E030X22CO
E030X24CO
E030X26COE040X5CO
E040X6CO
E040X8CO
SIZE(inches)
DIMENSIONS(mm)
CODE FORCLOSED TYPE
CODE FOROPENED TYPE
4x10
4x12
4x14
4x16
4x18
4x20
4x22
4x24
4x26
5x6
5x8
5x10
5x12
5x14
5x16
5x18
5x20
5x22
5x24
5x26
6x86x10
6x12
6x14
6x16
6x18
6x20
6x22
6x24
6x26
6x28
8x10
8x12
8x148x16
8x18
8x20
8x22
8x24
8x26
8x28
8x30
8x32
10x12
10x14
10x16
10x1810x20
10x22
10x24
109x300x330
109x356x370
109x391x400
109x447x440
109x503x480
109x559x520
109x615x550
109x671x600
109x726x630
133x185x240
133x241x280
133x300x320
133x356x360
133x391x380
133x447x420
133x503x460
133x559x500
133x615x540
133x671x580
133x726x620
160x241x260160x300x300
160x356x340
160x391x360
160x447x400
160x503x440
160x559x480
160x615x520
160x671x560
160x726x600
160x782x640
208x300x270
208x356x300
208x391x330208x447x370
208x503x410
208x559x450
208x615x490
208x671x520
208x726x560
208x782x600
208x838x640
208x894x680
259x356x270
259x391x290
259x447x330
259x503x370259x559x410
259x615x450
259x671x490
E040X10CC
E040X12CC
E040X14CC
E040X16CC
E040X18CC
E040X20CC
E040X22CC
E040X24CC
E040X26CC
E050X6CC
E050X8CC
E050X10CC
E050X12CC
E050X14CC
E050X16CC
E050X18CC
E050X20CC
E050X22CC
E050X24CC
E050X26CC
E060X8CCE060X10CC
E060X12CC
E060X14CC
E060X16CC
E060X18CC
E060X20CC
E060X22CC
E050X24CC
E060X26CC
E060X28CC
E080X10CC
E080X12CC
E080X14CCE080X16CC
E080X18CC
E080X20CC
E080X22CC
E080X24CC
E080X26CC
E080X28CC
E080X30CC
E080X32CC
E10X12CC
E10X14CC
E10X16CC
E10X18CCE10X20CC
E10X22CC
E10X24CC
E040X10CO
E040X12CO
E040X14CO
E040X16CO
E040X18CO
E040X20CO
E040X22CO
E040X24CO
E040X26CO
E050X6CO
E050X8CO
E050X10CO
E050X12CO
E050X14CO
E050X16CO
E050X18CO
E050X20CO
E050X22CO
E050X24CO
E050X26CO
E060X8COE060X10CO
E060X12CO
E060X14CO
E060X16CO
E060X18CO
E060X20CO
E060X22CO
E050X24CO
E060X26CO
E060X28CO
E080X10CO
E080X12CO
E080X14COE080X16CO
E080X18CO
E080X20CO
E080X22CO
E080X24CO
E080X26CO
E080X28CO
E080X30CO
E080X32CO
E10X12CO
E10X14CO
E10X16CO
E10X18COE10X20CO
E10X22CO
E10X24CO
ESPANSIT FRUSTUM END SEAL Type C
CO = open version CC = close version Stainless steel straps included
-
8/11/2019 Coliere RACI
19/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 19
SIZE(inches)
DIMENSIONS(mm)
CODE FORCLOSED TYPE
CODE FOROPENED TYPE
10x26
10x28
10x30
10x32
10x34
10x36
12x14
12x16
12x18
12x20
12x22
12x24
12x26
12x28
12x30
12x32
12x34
12x36
12x38
12x40
14x1614x18
14x20
14x22
14x24
14x26
14x28
14x30
14x32
14x34
14x36
14x38
14x40
16x1816x20
16x22
16x24
16x26
16x28
16x32
16x30
16x34
16x36
16x38
16x40
18x20
18x2218x24
18x26
18x28
259x726x530
259x782x570
259x838x610
259x894x640
259x950x680
259x1005x720
308x391x260
308x447x280
308x503x340
308x559x380
308x615x420
308x671x450
308x726x490
308x782x530
308x838x570
308x894x610
308x950x650
308x1005x690
308x1062x730
308x1118x770
338x447x280338x503x320
338x559x360
338x615x390
338x671x430
338x726x470
338x782x510
338x838x550
338x894x590
338x950x630
338x1005x670
338x1062x710
338x1118x750
386x503x280386x559x320
386x615x360
386x671x400
386x726x440
386x782x480
386x894x560
386x838x520
386x952x600
386x1005x630
386x1062x670
386x1118x710
434x559x290
434x615x330434x671x370
434x726x400
434x782x440
E10X26CC
E10X28CC
E10X30CC
E10X32CC
E10X34CC
E10X36CC
E12X14CC
E12X16CC
E12X18CC
E12X20CC
E12X22CC
E12X24CC
E12X26CC
E12X28CC
E12X30CC
E12X32CC
E12X34CC
E12X36CC
E12X38CC
E12X40CC
E14X16CCE14X18CC
E14X20CC
E14X22CC
E14X24CC
E14X26CC
E14X28CC
E14X30CC
E14X32CC
E14X34CC
E14X36CC
E14X38CC
E14X40CC
E16X18CCE16X20CC
E16X22CC
E16X24CC
E16X26CC
E16X28CC
E16X32CC
E16X30CC
E16X34CC
E16X36CC
E16X38CC
E16X40CC
E18X20CC
E18X22CCE18X24CC
E18X26CC
E18X28CC
E10X26CO
E10X28CO
E10X30CO
E10X32CO
E10X34CO
E10X36CO
E12X14CO
E12X16CO
E12X18CO
E12X20CO
E12X22CO
E12X24CO
E12X26CO
E12X28CO
E12X30CO
E12X32CO
E12X34CO
E12X36CO
E12X38CO
E12X40CO
E14X16COE14X18CO
E14X20CO
E14X22CO
E14X24CO
E14X26CO
E14X28CO
E14X30CO
E14X32CO
E14X34CO
E14X36CO
E14X38CO
E14X40CO
E16X18COE16X20CO
E16X22CO
E16X24CO
E16X26CO
E16X28CO
E16X32CO
E16X30CO
E16X34CO
E16X36CO
E16X38CO
E16X40CO
E18X20CO
E18X22COE18X24CO
E18X26CO
E18X28CO
SIZE(inches)
DIMENSIONS(mm)
CODE FORCLOSED TYPE
CODE FOROPENED TYPE
18x30
18x32
18x34
18x36
18x38
18x40
20x22
20x24
20x26
20x28
20x30
20x32
20x34
20x36
20x38
20x40
22x24
22x26
22x28
22x30
22x3222x34
22x36
22x38
22x40
22x42
22x44
24x26
24x28
24x30
24x32
24x34
24x36
24x3824x40
24x42
24x44
26x28
26x30
26x32
26x34
26x36
26x38
26x40
26x42
26x44
28x3028x32
28x34
28x36
434x838x480
434x894x520
434x950x560
434x1005x600
434x1062x640
434x1118x680
483x615x290
483x671x330
483x726x370
483x782x410
483x838x450
483x894x490
483x950x530
483x1005x570
483x1062x610
483x1118x650
531x671x300
531x726x340
531x782x380
531x838x420
531x894x450531x950x490
531x1005x530
531x1062x570
531x1118x610
531x1174x650
531x1230x690
580x726x300
580x782x340
580x838x380
580x894x420
580x950x460
580x1005x500
580x1062x540580x1118x580
580x1174x620
580x1230x660
627x782x310
627x838x350
627x894x390
627x950x430
627x1005x470
627x1062x500
627x1118x540
627x1174x580
627x1230x620
675x838x310675x894x350
675x950x390
675x1005x430
E18X30CC
E18X32CC
E18X34CC
E18X36CC
E18X38CC
E18X40CC
E20X22CC
E20X24CC
E20X26CC
E20X28CC
E20X30CC
E20X32CC
E20X34CC
E20X36CC
E20X38CC
E20X40CC
E22X24CC
E22X26CC
E22X28CC
E22X30CC
E22X32CCE22X34CC
E22X36CC
E22X38CC
E22X40CC
E22X42CC
E22X44CC
E24X26CC
E24X28CC
E24X30CC
E24X32CC
E24X34CC
E24X36CC
E24X38CCE24X40CC
E24X42CC
E24X44CC
E26X28CC
E26X30CC
E26X32CC
E26X34CC
E26X36CC
E26X38CC
E26X40CC
E26X42CC
E26X44CC
E28X30CCE28X32CC
E28X34CC
E28X36CC
E18X30CO
E18X32CO
E18X34CO
E18X36CO
E18X38CO
E18X40CO
E20X22CO
E20X24CO
E20X26CO
E20X28CO
E20X30CO
E20X32CO
E20X34CO
E20X36CO
E20X38CO
E20X40CO
E22X24CO
E22X26CO
E22X28CO
E22X30CO
E22X32COE22X34CO
E22X36CO
E22X38CO
E22X40CO
E22X42CO
E22X44CO
E24X26CO
E24X28CO
E24X30CO
E24X32CO
E24X34CO
E24X36CO
E24X38COE24X40CO
E24X42CO
E24X44CO
E26X28CO
E26X30CO
E26X32CO
E26X34CO
E26X36CO
E26X38CO
E26X40CO
E26X42CO
E26X44CO
E28X30COE28X32CO
E28X34CO
E28X36CO
ESPANSIT FRUSTUM END SEAL Type C
CO = open version CC = close version Stainless steel straps included
-
8/11/2019 Coliere RACI
20/2420 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
SIZE(inches)
DIMENSIONS(mm)
CODE FORCLOSED TYPE
CODE FOROPENED TYPE
28x38
28x40
28x42
28x44
28x46
28x48
30x32
30x34
30x36
30x38
30x40
30x42
30x44
30x46
30x48
30x52
30x56
32x34
32x36
32x38
32x4032x42
32x44
32x46
32x48
32x52
32x56
34x36
34x38
34x40
34x42
34x44
34x46
34x4834x52
34x56
36x38
36x40
36x42
36x44
36x46
36x48
36x52
36x56
36x60
38x40
38x4238x44
38x46
675x1062x470
675x1118x510
675x1174x550
675x1230x590
675x1285x630
675x1342x670
724x894x320
724x950x360
724x1005x400
724x1062x440
724x1118x480
724x1174x520
724x1230x550
724x1285x590
724x1342x630
724x1453x710
724x1562x790
772x950x330
772x1005x360
772x1062x400
772x1118x440772x1174x480
772x1230x520
772x1285x560
772x1342x600
772x1453x680
772x1562x750
821x1005x330
821x1062x370
821x1118x410
821x1174x450
821x1230x490
821x1285x530
821x1342x570821x1453x640
821x1562x720
868x1062x340
868x1118x380
868x1174x410
868x1230x450
868x1285x490
868x1342x530
868x1453x610
868x1562x690
868x1676x770
917x1118x340
917x1174x380917x1230x420
917x1285x460
E28X38CC
E28X40CC
E28X42CC
E28X44CC
E28X46CC
E28X48CC
E30X32CC
E30X34CC
E30X36CC
E30X38CC
E30X40CC
E30X42CC
E30X44CC
E30X46CC
E30X48CC
E30X52CC
E30X56CC
E32X34CC
E32X36CC
E32X38CC
E32X40CCE32X42CC
E32X44CC
E32X46CC
E32X48CC
E32X52CC
E32X56CC
E34X36CC
E34X38CC
E34X40CC
E34X42CC
E34X44CC
E34X46CC
E34X48CCE34X52CC
E34X56CC
E36X38CC
E36X40CC
E36X42CC
E36X44CC
E36X46CC
E36X48CC
E36X52CC
E36X56CC
E36X60CC
E38X40CC
E38X42CCE38X44CC
E38X46CC
E28X38CO
E28X40CO
E28X42CO
E28X44CO
E28X46CO
E28X48CO
E30X32CO
E30X34CO
E30X36CO
E30X38CO
E30X40CO
E30X42CO
E30X44CO
E30X46CO
E30X48CO
E30X52CO
E30X56CO
E32X34CO
E32X36CO
E32X38CO
E32X40COE32X42CO
E32X44CO
E32X46CO
E32X48CO
E32X52CO
E32X56CO
E34X36CO
E34X38CO
E34X40CO
E34X42CO
E34X44CO
E34X46CO
E34X48COE34X52CO
E34X56CO
E36X38CO
E36X40CO
E36X42CO
E36X44CO
E36X46CO
E36X48CO
E36X52CO
E36X56CO
E36X60CO
E38X40CO
E38X42COE38X44CO
E38X46CO
SIZE(inches)
DIMENSIONS(mm)
CODE FORCLOSED TYPE
CODE FOROPENED TYPE
38x48
38x52
38x56
38x60
40x42
40x44
40x46
40x48
40x52
40x56
40x60
40x64
42x44
42x46
42x48
42x52
42x56
42x60
42x64
44x46
44x4844x52
44x56
44x60
44x64
46x48
46x52
46x56
46x60
46x64
46x68
46x72
46x76
46x8048x52
48x56
48x60
48x64
48x68
48x72
48x76
48x80
52x56
52x60
52x64
52x68
52x7252x76
52x80
917x1342x500
917x1453x580
917x1562x650
917x1676x730
965x1174x350
965x1230x390
965x1285x420
965x1342x460
965x1453x540
965x1562x620
965x1676x700
965x1782x770
1014x1230x350
1014x1285x390
1014x1342x430
1014x1453x510
1014x1562x580
1014x1676x660
1014x1782x740
1062x1285x360
1062x1342x4001062x1453x470
1062x1562x550
1062x1676x630
1062x1785x700
1110x1342x360
1110x1453x440
1110x1562x520
1110x1676x600
1110x1782x670
1110x1900x750
1110x2002x830
1110x2123x910
1110x2222x9801159x1453x410
1159x1562x480
1159x1676x560
1159x1782x640
1159x1900x720
1159x2002x790
1159x2123x880
1159x2222x940
1255x1562x420
1255x1676x500
1255x1782x570
1255x1900x650
1255x2002x7201255x2123x810
1255x2222x880
E38X48CC
E38X52CC
E38X56CC
E38X60CC
E40X42CC
E40X44CC
E40X46CC
E40X48CC
E40X52CC
E40X56CC
E40X60CC
E40X64CC
E42X44CC
E42X46CC
E42X48CC
E42X52CC
E42X56CC
E42X60CC
E42X64CC
E44X46CC
E44X48CCE44X52CC
E44X56CC
E44X60CC
E44X64CC
E46X48CC
E46X52CC
E46X56CC
E46X60CC
E46X64CC
E46X68CC
E46X72CC
E46X76CC
E46X80CCE48X52CC
E48X56CC
E48X60CC
E48X64CC
E48X68CC
E48X72CC
E48X76CC
E48X80CC
E52X56CC
E52X60CC
E52X64CC
E52X68CC
E52X72CCE52X76CC
E52X80CC
E38X48CO
E38X52CO
E38X56CO
E38X60CO
E40X42CO
E40X44CO
E40X46CO
E40X48CO
E40X52CO
E40X56CO
E40X60CO
E40X64CO
E42X44CO
E42X46CO
E42X48CO
E42X52CO
E42X56CO
E42X60CO
E42X64CO
E44X46CO
E44X48COE44X52CO
E44X56CO
E44X60CO
E44X64CO
E46X48CO
E46X52CO
E46X56CO
E46X60CO
E46X64CO
E46X68CO
E46X72CO
E46X76CO
E46X80COE48X52CO
E48X56CO
E48X60CO
E48X64CO
E48X68CO
E48X72CO
E48X76CO
E48X80CO
E52X56CO
E52X60CO
E52X64CO
E52X68CO
E52X72COE52X76CO
E52X80CO
ESPANSIT FRUSTUM END SEAL Type C
CO = open version CC = close version Stainless steel straps included
-
8/11/2019 Coliere RACI
21/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 21
0-4/5
0-6/8
2-10/12
3-14/16
6-20/24
0-100/125
0-150/200
50-250/300
80-350/400
150-500/600
10x110/135
10x165/215
60x270/320
90x350/402
150x508/610
DIMENSION (mm)C x B / A
EKF000X05
EKF000X08
EKF020X12
EKF021X16
EKF060X24
CODE
END SEAL Type EKF
3x5
4x6
5x8
6x10
8x12
10x16
10x18
12x20
12x22
14x24
14x26
16x28
16x30
18x32
20x36
24x40
26x42
30x48
SIZE (inches)
650
650
650
650
650
650
650
650
650
650
650
650
650
900
900
900
900
900
HEIGHT (mm)
TCCSK65K05
TCCSK65K06
TCCSK65K08
TCCSK65K10
TCCSK65K12
TCCSK65K16
TCCSK65K18
TCCSK65K20
TCCSK65K22
TCCSK65K24
TCCSK65K26
TCCSK65K28
TCCSK65K30
TCCSK90K32
TCCSK90K36
TCCSK90K40
TCCSK90K42
TCCSK90K48
CODE
HEATSHRINKABLE END SEAL Type CSK
Customized versions are available on request
(inches) (mm)SIZE
Stainless steel straps included
-
8/11/2019 Coliere RACI
22/2422 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]
One of the mayor crossingrealized with raci spacers:
Carrier 3200 mm SteelCasing 4000 mm Steel
Cooling water pipelineCarrier pipe 1800 mmCasing pipe 2000 mm
E elements CDE41RCrossing length: 380 m
-
8/11/2019 Coliere RACI
23/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 23
WarrantyAll products are warranted against failure caused by manufacturing defects for aperiod of one year. Any product found to be so defective and returned within oneyear from date of shipment will be replaced without charge. The above warranty ismade in lieu of, and we disclaim, any and all other warranties, expressed orimplied, including the warranties of merchantability and fitness for a particularpurpose, and buyer agrees to accept the products without any such warranties.We hereby disclaim any obligation or liability for consequential damages, labor
costs or any other claims or liabilities of any kind whatsoever.
iso 9001 certif. n 0364/2
-
8/11/2019 Coliere RACI
24/24
S12
-Eng.2
005.R
EV2