Coiled Tubing Jacking Frames

The user friendly Dwellop Jacking Frame enables safe and efficient handling of CT injector and tools

– IOR Technology

The Jacking Frame is developed to give increased productivity and safety during coiled tubing operations. The Jacking Frame is equipped with an elevation frame which can be elevated on the main legs, the elevation of the frame is performed by 4 synchronized and self-locking lifting screws, ensuring safe working area for personnel and handling of equipment.

Features:

• Injector handling system with self- locking lifting screws (fail safe) – proven technology

• Heigth working range from 1m to 6m

• Injector skidding in two directions available

• Injector tilting available

• Stabbing winch for coil available

• Gin pole for tool handling available

• Extension frames available

• Full DnV GL 2.7-3 Certification available

Benefits:

• Lifting screws, skidding and tilting provide accurate positioning when connecting tools

• Small footprint, good reach to wells

• Backtension post included, no need for guy ropes for injector

• Efficient and safe operation from all positions via remote control panel

• Quick change from coiled tubing to wireline operations possible

• User friendly, easy access to all areas

Coiled Tubing Jacking Frames

Dwellop ASOffice phone: +47 51 57 28 00E-mail: info@dwellop.nodwellop.no

Main technical spesification:

Note 1: Full DNV GL certification available upon request.

Certification Standard

Lifting Capacity

Tool winch Stabbing winch

Total Weight

Height Lenght Width

DNV 2.7-3 (note 1)

20MT 1MT 3MT 10MT 6.3m 3.8m 2.3m