coaxial, triaxial, multi & mixed connectors · pdf filecoaxial, triaxial, multi &...
TRANSCRIPT
® ®
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com A
SHORT FORM CATALOGUE
COAXIAL, TRIAXIAL, MULTI & MIXED CONNECTORS
® ®
www.lemo.com
® ®
www.lemo.com
Precision modular connectors to suit your applicationSince its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors.
Over 75000 connectorsThe modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 114 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni-cations and military.
LEMO’s Push-Pull Self-Latching Connection System (not shown in this catalogue) This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
UL Recognition LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO connector, cable and your equipment) will be easier because LEMO connectors are recognized.
CE marking CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electrome- chanical components, such as connectors.
RoHSLEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in Europe.
The LEMO self-latching system allows the connector to be mated by simply pushing the plug axially into the socket.
Once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve.
When required, the connector is disengaged by a single axial pull on the outer release sleeve. This first disen-gages the latches and then withdraws the plug from the socket.
® ®
www.lemo.com 1
Introduction
Material and treatment
This catalogue gives the complete description of LEMO connectors with coaxial, triaxial and mixed contacts. Mixed contacts include coaxial and low voltage contact configurations, as well as multi-coaxial contact configurations.
The LEMO manufacturing programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental characteristics. Each series includes a wide variety of plug, socket and coupler models, available in contact configurations adapted to all round cables. The catalogue includes the B, K, S and E Series of the LEMO product range. In addition the 00 Series (triaxial) connector is also represented. Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic compatibility (EMC) is important.
Surface treatment (µm)
Notes:standards for surface treatment are as follows:– chrome-plated: SAE AMS 2460– nickel-plated: SAE AMS QQ N 290, or MIL DTL 32119– gold-plated: ISO 27874– black chrome: MIL-C-14538C with a minimum of 10 µm of lacquer
protection1) for FFP, PCP and ERN models of the 0S to 3S series2) for FFP, PCP and ERN models of the 0S to 3S series, FGG and ENG
models of the 0B, 1B, 3B and 4B series, FFA and FFC models of the 00 triaxial series
3) for the FGG, FGY and ENY models of the 2B to 4B series4) for 00 triaxial series (elbow sockets for printed circuits)5) gold-plating for unipole types6) used in 00 series free and fixed sockets7) AISI 416 steel is used with shells made of AISI 303 or 3048) delivered with free and fixed sockets with aluminium alloy or stainless
steel shell9) FPM/FKM (Viton®) o-ring and gaskets are installed upon special
request. However standard for vacuumtight models.
Material (Standard)Component
Outer shell, collet nut, conical nut or notched nut and oversized collet
Earthing crown
Latch sleeve
Locking washer
Hexagonal or round nut
Other metallic components
O-ring and gasketsSealing resin
Notes chrome nickel gold black chr. Cu Ni Cr Cu Ni Cu Ni Au Ni Cr 0.5 3 0.3 0.5 3 0.5 3 0.5 1 2 without treatment anodized – 1)
– 2)
– 3)
– 3)
– 4)
– – – 0.5 3 0.5 3 1.0 – – 5)
– – – 0.5 3 0.5 3 1.0 – – 6)
without treatment 7)
0.5 3 0.3 0.5 3 0.5 3 0.5 – – without treatment 7)
– – – 0.5 3 0.5 3 0.5 – – – – – 0.5 3 0.5 3 0.5 – – without treatment 8)
anodized natural 8)
– – – 0.5 3 0.5 3 0.5 – – without treatment – 9)
–
Brass (UNS C 38500)Stainless steel (AISI 303, 304 or 316L)Aluminium alloy (AA 6262A or AA 6023)POM (Delrin® or Ertacetal®), Polyoxymethylene, blackPEEK, Polyether ethercetone, beigePSU (Udel®), Polysulfone, grey or whitePPSU (Radel®), Polyphenylsulfone, creamPPS (Ryton®), Polyphenilene sulfide, brownBronze (UNS C 54400) or special brassBeryllium Copper (UNS C 17300)Stainless steel (AISI 416 or 316L)Special brassStainless steel (AISI 416 or 316L)Bronze (UNS C 52100)Brass (UNS C 38500)Stainless steel (AISI 303, 304 or 316L)Aluminium alloy (AA 6262A or AA 6023)Brass (UNS C 38500)Stainless steel (AISI 303, 304 or 316L)Silicone MQ/MVQ or FPM/FKM (Viton®)Epoxy (Araldite® or Stycast®)
® ®
2 www.lemo.com
FHG
FIG
FKG
FGG
FFG
FGG
FEG
FNG
FDG
EJG PHG
PHG
PNG
FGGFGG
FGYFGY
ENG
ENY
FAG
FWG EGG
EHG
EKG
ENG EEG
ECG
PEG
PKG
PFG
B Series
B series connectors provide the following main features:– security of the Push-Pull self-latching system – up to 10 coaxial contacts– coaxial, triaxial and mixed contact configurations – solder or crimp contacts– plastic models made of PSU or PPSU – high packing density for space savings– multiple key options to avoid cross mating – 360° screening for full EMC shielding of similar connectors («G» key standard).
Fixed plugs Straight plugs Fixed sockets Free sockets
Elbow plugs
Fixed sockets
Fixed socketsStraight plugsPlastic housing models
Metal housing models
Model DescriptionECG Fixed socket with two nuts, key (G) or keys
(A…L and R) (back panel mounting)EEG Fixed socket, nut fixing, key (G) or keys
(A…L and R) (back panel mounting)EGG Fixed socket, nut fixing, key (G)
or keys (A…L and R) EHG Fixed socket, nut fixing, key (G) or keys
(A…L and R), and protruding shellEJG Fixed socket, press or adhesive fit,
key (G) or keys (A…L)EKG Fixed socket, nut fixing, key (G) or keys
(A…L and R), special alignment mark on the front
ENG Fixed socket with earthing tag, nut fixing, key (G) or keys (A…L)
ENG Fixed socket with earthing tag, nut fixing, key (G or J), PEEK outer shell
ENY Fixed socket with earthing tag, nut fixing, keys (Y), PSU or PPSU outer shell
FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A…L and R)
FDG Straight plug, long version, key (G) or keys (A…L), cable collet
FEG Straight plug, key (G) or keys (A…L), cable collet, front seal and nut for fitting a bend relief (IP 54 protection index when mated)
FFG Straight plug, non-latching, key (G) or keys (A…L), cable collet
FGG Straight plug, key (G) or keys (A…L and R), cable collet
FGG Straight plug, key (G) or keys (A…L), cable collet and nut for fitting a bend relief
FGG Straight plug, key (G or J), cable collet, PEEK outer shell
FGG Straight plug, key (G or J), cable collet, PEEK outer shell, nut for fitting a bend relief
FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell
FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell and nut for fitting a bend relief
FHG Elbow (90°) plug, key (G) or keys (A…L and R), cable collet
FIG Straight plug for remote handling, key (G) or keys (A…L and R), special alignment mark, knurled handling surface, cable collet
FKG Elbow (90°) plug for remote handling, key (G) or keys (A…L), special alignment mark, knurled handling surface, cable collet
FNG Straight plug, key (G) or keys (A…L and R), cable collet and lanyard release
FWG Fixed plug, nut fixing, key (G) or keys (A…L)
PEG Fixed socket, nut fixing, key (G) or keys (A…L), cable collet (back panel mounting)
PFG Fixed socket, with two nuts, key (G) or keys (A…L and R), cable collet (back panel mounting)
PHG Free socket, key (G) or keys (A…L and R), cable collet
PHG Free socket, key (G) or keys (A…L), cable collet and nut for fitting a bend relief
PKG Fixed socket, nut fixing, key (G) or keys (A…L and R), cable collet
PNG Free socket, nut fixing, key (G) or keys (A…L and R), cable collet with lanyard release
® ®
www.lemo.com 3
Fixed socket
Part Numbering System
Plug
Free socket
Part Section Showing Internal Components (mixed coax + LV)
13 4 5267
43
678
5
12
43
65
78
12
8 6 5 4 2 7 38 1
Fixed socket
outer shellearthing crownretaining ringhexagonal nutlocking washerinsulatorfemale contactfemale coaxial contact
Straight plug
outer shelllatch sleevecollet nutsplit insert carrierinsulatormale contactcolletmale coaxial contact
F G G
P H G
3 B
3 B
8 4 4
8 4 4
C L A D 1 1
C L L D 1 1
1
1
1E G G 3 B 8 4 4 C L L
Model
Alignment key: G
Series
Insert configuration:multi coax, coax + LV
Cable group
Contact type:A = male solderC = male crimpL = female solderM = female crimp
Insulator: L = PEEK
Housing:C = brass chrome-platedP = PSU
Cable groupZ = collet nut for bend reliefVariant:
Cable ø max. 1)
Collet type: D or M
FGG.3B.844.CLAD111 = straight plug with key (G) and cable collet, 3B series, mixed coax & low voltage type (1 coax and 4 low voltage contacts), outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for up to 11 mm diameter cable. Cable group 1.
PHG.3B.844.CLLD111 = free socket with key (G) and cable collet, 3B series, mixed coax & low voltage type (1 coax and 4 low voltage contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts, D type collet for up to 11 mm diameter cable. Cable group 1.
EGG.3B.844.CLL1= fixed socket, nut fixing, with key (G), 3B series, mixed coax & low voltage type (1 coax and 4 low voltage contacts), outer shell in chrome plated brass, PEEK insulator, female solder contacts. Cable group 1.
Note: 1) see unipole-multipole catalogue.
® ®
4 www.lemo.com
K series connectors have been specifically designed for outdoor applications.They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket or fixed socket. All models of this series are watertight when mated to give a protection index of IP68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).K series connectors have the same insulators as the B series and have the following main features:– security of the Push-Pull latching system – watertight connection (IP 68/IP 66)– coaxial, triaxial and mixed contact configurations – up to 10 coaxial contacts – solder or crimp contacts – 360° screening for full EMC shielding– multiple key options to avoid cross mating – high packing density for space savings of similar connectors («G» key standard) – rugged housing for extreme working conditions.
FGG
FGG
FGG
EGG
PHG
EDG
EBG
EHG
FXG
FAG
FHG
PHG
PHG
PKG
PEGEEG
Straight plugs Fixed sockets Free sockets Fixed socketsFixed plugs
Elbow plug
Models
Model DescriptionEBG Fixed socket with square flange,
key (G) or keys (A to F, L and R) and screw fixing
EDG Fixed socket with square flange, key (G) or keys (A to F, L and R), protruding shell and earthing tag, screw fixing
EEG Fixed socket, nut fixing, key (G) or keys (A to F, L and R) (back panel mounting)
EGG Fixed socket, nut fixing, key (G) or keys (A to F, L and R)
EHG Fixed socket, nut fixing, key (G) or keys (A to F and L), protruding shell
FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to F, L and R)
FGG Straight plug, key (G) or keys (A to F, L and R), cable collet
FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and oversize cable collet
FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief
FHG Elbow (90°) plug, key (G) or keys (A to F, L and R), cable collet
FXG Fixed plug with round flange, key (G) or keys (A to F, L and R) and screw fixing
PEG Fixed socket, nut fixing, key (G) or keys (A to F, L and R), cable collet (back panel mounting)
PHG Free socket, key (G) or keys (A to F, L and R), cable collet
PHG Free socket, key (G) or keys (A to F, L and R), cable collet and oversize cable collet
PHG Free socket, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief
PKG Fixed socket, nut fixing, key (G) or keys (A to F, L and R), cable collet
K Series
® ®
www.lemo.com 5
Part Section Showing Internal Components (mixed coax + LV)
FGG.3K.844.CLAC113 = straight plug with key (G) and cable collet, 3K series, mixed coax & low voltage type (1 coax and 4 low voltage contacts), outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 10.5 mm diameter cable. Cable group 3.
PHG.3K.844.CLLC113 = free socket with key (G) and cable collet, 3K series, mixed coax & low voltage type (1 coax and 4 low voltage contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts, C type collet for 10.5 mm diameter cable. Cable group 3.
EGG.3K.844.CLL1 = fixed socket, nut fixing, with key (G), 3K series, mixed coax & low voltage type (1 coax and 4 low voltage contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Cable group 1.
Note: 1) see unipole-multipole catalogue.
Part Numbering System
Plug
Free socket P H G 3 K 8 4 4 C L L C 1 1 3
F G G 3 K 8 4 4 C L A C 1 1 3
Cable groupZ = collet nut for bend reliefVariant:
Cable ø max. 1)
Collet type: C or K
Fixed socket E G G 3 K 8 4 4 C L L 1
Model
Alignment key: G
Series
Insert configuration:multi coax, coax + LV
Cable group
Contact type:A = male solderC = male crimpL = female solderM = female crimp
Insulator: L = PEEK
Housing:C = brass chrome-plated
43
12
5678
14 7325 6 3 7 6 4 1 9 11 128 243
12
5678910111213
10 58 13
Fixed socket
outer shellearthing crownretaining ringhexagonal nutinsulatorfemale contacto-ringfemale coaxial contact
Straight plug
outer shelllatch sleeveinner shellretaining ringcollet nutsplit insert carrierinsulatormale contactearthing conecolletgasketwashermale coaxial contact
® ®
6 www.lemo.com
Mixed: multi coax, coax + LV
B R
G
l First choice alternative Special order alternative
Insert configuration (B and K series)
1B1K
ø A
Coax
Ref
eren
ce
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Type
(see
pag
e 10
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Sold
er
Crim
p
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Coax Low voltage (LV)
Contactstype
2B2K
3B3K
1 50 A1 1-2-3 2 0.9 l l 0.85 1.20 10
1 50 A1 1-2-3 4 0.7 l l 0.75 1.05 7
1 50 A1 1-2-3 6 0.7 l l 0.75 1.05 7
1 50 C 1-2-3 10 0.7 l l 0.95 1.35 7
2 50 E 2 1 1.6 l l 1.90 2.70 17
2 50 G – – – – – – – –
3 50 E 2 – – – – – – –
1 50 F 2 1 0.9 l l 0.85 1.20 10
1 50 F 2 3 0.9 l l 0.75 1.05 10
1 50 A0 6 3 0.9 l – 1.10 1.55 8
1 50 A1 1-2-3 6 0.7 l l 1.00 1.50 7
1 50 A1 1-2-3 9 0.7 l l 1.00 1.50 7
1 50 A1 1-2-3 12 0.9 l l 0.80 1.10 5
1 50 A1 1-2-3 13 0.7 l l 0.90 1.30 7
1 50 C 1-2-3 22 0.7 l l 0.70 1.00 5
2 50 C 1-2-3 4 0.9 l l 0.90 1.30 10
2 50 C 1-2-3 6 0.9 l l 0.90 1.30 10
2 50 C 1-2-3 10 0.7 l l 0.75 1.05 8
2 50 C 1-2-3 16 0.7 l l 0.70 1.00 7
2 50 C 1-2-3 – – – – – – –
3 50 C 1-2-3 – – – – – – –
3 50 C 1-2-3 2 0.9 l l 1.10 1.60 9
802
804
806
810
841
232
243
801
803
803
806
809
812
813
822
844
846
850
856
242
243
862
® ®
Mixed: multi coax, coax + LV
l First choice alternative Special order alternative Note: 1) only available in 5B series. Solution for triaxial cable fixing.
4B4K
5B5K
ø A
Coax
Ref
eren
ce
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Type
(see
pag
e 10
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Sold
er
Crim
p
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Coax Low voltage (LV)
Contacts type
www.lemo.com 7
50 75
50 75
50 75
AA
5-64 to 6
AA
5-64 to 6
AA
5-64 to 6
802822
804824
806826
842
844
852
856
858
866
885
244
879
890
894
9971)
840
1 2 0.9 l l 1.00 1.40 12
1 4 0.9 l l 1.00 1.40 10
1 6 0.9 l l 1.00 1.40 10
2 50 A1 1-2-3 2 0.9 l l 1.70 2.40 12
2 50 A1 1-2-3 4 0.9 l l 1.70 2.40 10
2 50 C 1-2-3 12 0.9 l l 0.90 1.30 8
2 50 C 1-2-3 16 0.9 l l 0.90 1.30 8
2 50 C 1-2-3 18 0.7 l l 0.80 1.10 7
3 50 C 1 6 0.7 l l 0.80 1.10 7
3 50 C 1-2-3 12 0.7 l l 0.80 1.10 8
4 50 C 1-2-3 – – – – – – –
4 50 C 1-2-3 9 0.7 l l 0.90 1.30 8
6 50 E 2 18 0.7 l l 0.90 1.30 5
6 50 E 2 22 0.7 l l 0.90 1.30 4
1 75 A4 N/A 32 1.3 l l 1.20 1.70 8
1 50 A 5-6 40 0.9 l l 1.30 1.80 7
® ®
8 www.lemo.com
ø A
Coax
Mixed: multi coax, coax + LV
Ref
eren
ce
C1
C2
1 50 B 6 l l 0.80 1.15
2 10 0.9 l l 1.40 2.00 8
2 16 0.9 l l 1.40 2.00 7
2
2 75 B0 1-6 24 1.3 l l 0.90 1.30 8
3 75 B1 5 – – – – – – –
4 75 B1 5 – – – – – – –
6 75 D 5-8-9 10 0.9 l l 0.70 1.00 7
7 75 D 5-8-9 – – – – – – –
10 50 C 1-2-3 – – – – – – –
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Type
(see
pag
e 10
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Sold
er
Crim
p
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
l First choice alternative Special order alternative
5B5K
Coax Low voltage (LV)
Contactstype
868
850870
856876
857877
864
273
274
892
260
240
444
3.00.9
356
5075
5075
5075
BB
BB
BB
63-5
63-5
63-5
215
2.00.9
ll
ll
1.401.40
2.002.00
307
® ®
ø A
Coax
Mixed: coax + LV + HV, coax + LV + Fluidic, coax + LV + Fibre optic
Ref
eren
ce
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 10
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Num
ber o
f con
tact
s
ø A
(mm
)
Num
ber o
f con
tact
s
Type
Num
ber o
f con
tact
s
Inne
r tub
e ø
(mm
)
Note: 1) Test voltage LV contact-shell 1.9 (kV rms). 2) Test voltage HV contact-shell 7.5 (kV rms). Total rated current for 2B.932 configuration 6 (A).
2B2K
3B3K
Coax Low volt.(LV)
High volt.(HV)
Fibre optic(FO)
Fluidic(FL)
www.lemo.com 9
1 50 2.0 C 1 2 1) 0.7 1 2) 0.7 – – – –
1 50 2.0 C 1 4 0.9 1 0.9 – – – –
1 50 2.0 C 1 10 0.7 – – – – 1 1.3
1 50 2.0 C 1 16 0.7 – – 1 F2 – –
934
970
986
932
® ®
10 www.lemo.com
Coaxial contacts for B and K series
Sheath ø
Min
i
Max
i
Note:1) These contacts require specific tools for assembly on the cable, see page 11.2) Frequency range with SWR ≤ 1.2 = 0 - 1.5 GHz.3) Coax contact design differs, the central pin is reverse gender.
Type
Impe
danc
e (Ω
)
ø A
(mm
)
Con
d. fi
Scre
en fi
Cab
le g
roup
Con
d. ø
max
i
Die
lect
ric ø
max
i
Min
i
Max
i
VSW
R (f
=GH
z)
Test
vol
tage
(kV
rms)
Rat
ed c
urre
nt (A
)
1.05+1.83f
1.01+0.127f
1.04+0.1f
1.02+0.93f
1.01+0.146f
1.01+0.19f
1.901.901.901.651.051.65
2.51.72.2
3.002.102.603.002.353.00
0.600.600.60
0.50 0.580.28 0.350.28 0.35
123123
3.953.95
4.35.3
5.106.10
1.351.35
56
3.953.953.95
3.84.35.3
4.605.106.10
1.051.051.05
456
1.01+0.19f
1.06+0.156f
1.00+0.22f
1.00+0.22f
1.00+0.22f
3.75 2.45 3.00
5.40 3.90 4.90
0.75 0.75 0.75
5 8 9
1.00+0.38f
1.01+0.73f
1.02+0.3f 2)
2.453.75
0.800.80
35
2.953.75
0.750.75
16
0.55 0.80
F 1) 3)
A1
C1)
E 1) 3)
A
A4
B1)
B0
B11)
D1)
G3)
A0
50 0.5 solder crimp 2 0.35 1.05 – 2.10 0.8 2
50 0.7 solder collet 0.9 5
50 0.6 crimp crimp – 1.6 2
50 0.5 solder crimp 2 0.35 0.95 – 2.00 0.8 2
50 1.6 solder collet 1.8 12
75 1.3 solder collet 2.4 7
75 1.3 solder collet none 1.05 3.95 6.7 7.60 2.4 7
50 0.9 solder crimp 6 1.05 3.75 – 6.25 0.8 11
75 0.6 solder crimp – 6.25 2.1 6
75 0.6 solder solder – 4.25 2.1 6
75 0.6 crimp crimp 5 3.75 – 6.25 2.1 6
75 0.5 solder crimp – 1.0 5
50 0.5 solder crimp 1 0.35 1.65 – 3.00 0.4 2
50 1.3 solder collet 6 0.95 – 3.3 4.10 3.0 12
® ®
www.lemo.com 11
Recommended coaxial cables for mixed coax, multi coax for B and K Series
LEMO cablePart Number Type LEMO Impedance Conductor Dielectric Screen Sheath
cable group (Ω) ø (mm) ø (mm) ø (mm) ø (mm)
Note: 1) when no defined impedance is required.The cable group number corresponding to the chosen cable must be written in the variant position, see pages 3 and 5.
Tooling for coaxial contacts of B and K series
Note: 1) for the 3B.243/3K.243 and 3B.862/3K.862 the extractor is part number DCC.91.393.4LT.
Coaxial Imp. Cable contact type Ω group
Reference
F
C1)
E
B
B1
D
50
50
50
50
50
75
75
75
75
75
75
2
1-3
2
2
6
3
5
5
5
8
9
311 100 LEDE
CCX.50.RG5.8CU50N
CCX.50.RG5.9BU62N
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26B
CCX.50.RG1.88AU26B
CCX.50.RG1.96AU20B
CCX.50.RG3.16U26M
RG 6 A/U 7 75 ± 3 0.73 4.70 6.20 8.45
RG 11 A/U 9 75 ± 2 1.17 7.25 8.15 10.10
RG 58 C/U 6 50 ± 2 0.90 2.95 3.60 5.00
RG 59 B/U 5 75 ± 3 0.60 3.70 4.50 6.20
RG 174 A/U 1 50 ± 2 0.48 1.50 2.00 2.80
RG 178 B/U 2 50 ± 2 0.30 0.84 1.30 1.80
RG 179 B/U 3 75 ± 3 0.30 1.50 2.00 2.50
RG 180 B/U 4 95 ± 5 1) 0.30 2.60 3.10 3.60
RG 187 A/U 2 75 ± 3 0.30 1.50 2.00 2.60
RG 188 A/U 1 50 ± 2 0.54 1.50 2.00 2.60
RG 196 A/U 1 50 ± 2 0.30 0.84 1.30 1.95
RG 316 /U 1 50 ± 2 0.60 1.60 2.10 2.80
DPE.99.025.45K DCC.91.019.1LA –
DPE.99.103.8K – DCC.91.384.5LA
DPE.99.103.1K – DCC.91.384.5LA
DPE.99.002.5K DCC.91.050.2LA –
DPE.99.176.2K – DCC.91.804.5LA
DPE.99.125.2K – DCC.91.804.5LA
DPE.99.127.0K – DCC.91.804.5LA
DPE.99.127.0K – DCC.91.808.0LC
DPE.99.006.2K DCB.91.685.8TN –
DPE.99.005.2K DCB.91.685.8TN –
DPE.99.005.5K DCB.91.685.8TN –
Crimping tool with die Spanner for tightening the contact Extractor
® ®
The 00 Series are available in triax configuration, allowing a very compact solution for triaxial cables. These connectors are designed for small diameter ranging from 1.1 to 3.5 mm. Either twinax (2 shielded connectors) or triax (1 conductor and 2 concentric separate screens) can be used with the 00 Series. The 00 Series with a 650 configuration insert are mostly used in audio-video applications where a large density of connection is required. LEMO 00 Series connectors offer customers many benefits including:– self-latching push-pull system – ease of use– aesthetically pleasing appearance – low weight– small size – reliable performances– high packing density – wide choice to suit application– rugged construction.
FFC
FFC
EPA PCA
PSA
FAR
FAA
ERN
ECP
EPL
FFY
FLA
FFC
ERX
FVN
ERC
ELFELF
Elbow plug Straight plugs Fixed and free sockets
Elbow socket Fixed socket
Free socket
Metal housing models
Plastic housing model
Straight plug
Threaded latching models
Straight plug Fixed socket
Part Section Showing Internal Components
14 5 267 3
43
12
1 45267 3
4
3
12
8
6
5
7
6
5
7
8
Fixed socket
outer shellearthing crownretaining ringhexagonal nutlocking washerinsulatorfemale triaxial contact
Straight plug
outer shelllatch sleevecollet nutearthing sleeverear insulatorinsulatormale triaxial contactcollet
Model DescriptionECP Fixed socket with 2 round nuts
(back panel mounting)ELF Fixed socket, nut fixing, threaded shell
with tag (back panel mounting)ELF Fixed socket, nut fixing, threaded shell
with tag, black chromium-plated outer shell (back panel mounting)
EPA Straight socket for printed circuit boardEPL Elbow plug (90°) for printed circuit boardERC Fixed socket, with thread, with slots
in flange
ERN Fixed socket with nut fixing and tagsERX Fixed socket with nut fixing,
slots on flange and tagsFAA Straight plug non latching with nutFAR Straight plug non latching with 2 nuts
(back panel mounting)FFC Straight plug with flats on latch sleeve
and cable colletFFC Straight plug with flats on latch sleeve
and cable collet and nut for fitting a bend relief
FFC Straight plug with flats on latch sleeve and cable collet, black POM (Delrin® outershell)
FFY Straight plug, large shell with cable colletFLA Elbow socket (90°) with cable colletFVN Straight plug with cable collet,
black chromium-plated outer shell PCA Free socket with cable colletPSA Fixed socket, nut fixing, cable collet
00.650 Series
12 www.lemo.com
00 – 50 0.5 1) 0.55 2.9 3.5 0.6 4
® ®
www.lemo.com 13
FFC.00.650.CLAC27 = straight plug with flats on latch sleeve and cable collet, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator, C type collet for an up to 2.6 mm diameter cable.
PCA.00.650.CLLC27Z = free socket with cable collet, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator, C type collet for an up to 2.6 mm diameter cable and nut for fitting a bend relief.
ERN.00.650.CLL = fixed socket with nut fixing and tags, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator.
Note: 1) treatment not available for the printed circuit models. 2) available for the FFC model only. 3) standard.
Part Numbering System
Fixed socket
Plug
Free socketø
A
Stan
dard
Wat
ertig
ht
Impe
danc
e (Ω
)
ø A
(mm
)
Cab
le g
roup
Con
d. ø
max
Die
lect
ric ø
max
i
Shea
th ø
max
i
VSW
R (f
=GH
z)
Test
vol
tage
(kV
rms)
Rat
ed c
urre
nt (A
)
Ref
eren
ce
1.02+0.9f650
Note: 1) 00.650 is designed for use with 2 conductors screened cable (twinax).
Insert configuration
F F C 0 0 6 5 0 C L A C 2 7
P C A 0 0 6 5 0 C L L C 2 7 Z
E R N 0 0 6 5 0 C L L
VariantCable ø max.:from 1.1 to 3.5 mmCollet type: C = with cable collet clampingContact type:A = male solderL = female solder
Variant
Contact type:A = male solderD = male printL = female solderN = female print
Insulator: L = PEEK
Model
Series: 00
Insert configuration:650 = triaxial (50 Ω )Housing : N = brass nickel-plated 3)
C = brass chrome-plated 3) 1)
K = brass black chrome 1)
B = black POM 2)
G = PEEK (natural)
Series
® ®
14 www.lemo.com
HGP
HGW
EWB
FTR
FFA, FFP
FFA, FFP
FFA
FZP
FAA
FLCFLS
FRT FFB
PCA, PCP
PCA
PCA PSS
SWH
RAD
RMA
FFE
ERN
FFL
ERA
ERC
ERN
EBD
EBS
EBC
ECP
ERD
PSA, PSP
EHP
HCP
FFA, FFPFFP
FFF
FFS
JLM
S series connectors have main features as follows:– security of the Push-Pull self-latching system – coaxial, triaxial and mixed contact configurations– solder contacts, print contacts only for coaxial – polarisation by stepped insert (half-moon) and triaxial configurations – up to 8 coaxial contacts– 360° screening for full EMC shielding.
Watertight or vacuumtight modelsPlastic housing modelsFixed socketsFixed socketStraight plugs Fixed coupler
Straight plugsStraight plug Fixed sockets Free sockets Fixed sockets
Free coupler
Elbow plugs
Straight plugwith resistor
Fixed plug
Fixed coupler
Elbow plug with socket
Metal housing models
EBC Fixed socket with square flange, protruding shell and screw fixing
EBD Fixed socket with square flange, screw fixing
EBS Fixed socket with round flange, screw fixingECP Fixed socket with two nuts, long threaded
shell (back panel mounting)EHP Fixed socket, nut fixing, protruding shellERA Fixed socket, nut fixingERC Fixed socket, nut fixing, slot in the flangeERD Fixed socket with two nuts
(back panel mounting)ERN Fixed socket, nut fixing, with earthing tagERN Fixed socket, nut fixing, with earthing tag,
PEEK or POM outer shellEWB Fixed socket, nut fixing, with two flats
on the flange, watertight or vacuumtightFAA Fixed plug non-latching, nut fixingFFA Straight plug, cable colletFFA Straight plug with oversize cable colletFFA Straight plug, cable collet
and nut for fitting a bend reliefFFA Straight plug, cable collet,
PEEK or POM outer shellFFB Straight plug, cable collet
and safety locking ringFFE Straight plug, cable collet, front seal
and nut for fitting a bend relief (protected to IP54 when mated)
FFF Straight plug, non-latching, cable collet
FFP Straight plug, cable collet and inner anti-rotating device
FFP Straight plug, cable collet, PEEK or POM outer shell and inner anti-rotating device
FFP Straight plug, cable collet, PEEK or POM outer shell, inner anti-rotating device and nut for fitting a bend relief
FFS Straight plug for cable crimpingFLC Elbow (90°) plug, cable colletFLC Elbow (90°) plug, cable collet
and nut for fitting a bend reliefFLS Elbow (90°) plug for cable crimpingFRT Straight plug with resistorFTR Elbow (90°) plug with socketFZP Straight plug for remote handling,
cable collet and inner anti-rotating deviceHCP Fixed socket, nut fixing, watertight
or vacuumtight (back panel mounting)HGP Fixed socket, nut fixing, watertight
or vacuumtightHGW Fixed socket, nut fixing, with back washer,
watertight or vacuumtightJLM Elbow (90°) plug, cable colletPCA Free socket, cable colletPCA Free socket with oversize cable colletPCA Free socket, cable collet and nut for fitting
a bend reliefPCP Free socket, cable collet and inner
anti-rotating devicePSA Fixed socket, nut fixing, cable colletPSP Fixed socket, nut fixing, cable collet
and inner anti-rotating devicePSS Free socket, nut fixing for cable crimpingRAD Fixed coupler, nut fixingRMA Free couplerSWH Fixed coupler, nut fixing, watertight
or vacuumtight
Model Description
S Series
® ®
www.lemo.com 15
Part Section Showing Internal Components (mixed coax + LV)
1 4 36 5 2 7
43
12
65
78
43
12
65
7
542 36 178
Fixed socket outer shellearthing crownretaining ringhexagonal nutlocking washerinsulatormale coaxial contactfemale contact
Straight plug
outer shelllatch sleevecollet nutcentre-pieceinsulatorfemale coaxial contactcollet
Fixed socket
Part Numbering System
Plug
Free socket
F F A 1 S 2 5 0 C T A C 3 2
P C A 1 S 2 5 0 C T L C 3 2 Z
E R A 1 S 2 5 0 C T L
FFA.1S.250.CTAC32 = straight plug with cable collet, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, male solder contact, C type collet for a 3.2 mm diameter cable.
PCA.1S.250.CTLC32Z = free socket with cable collet, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, female solder contact, C type collet for a 3.2 mm diameter cable and nut for fitting a bend relief.
ERA.1S.250.CTL = fixed socket, nut fixing, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, female solder contact.
Note: 1) for mixed contacts, add cable group to the part number. 2) see unipole-multipole catalogue.
Variant 1)
Cable ø max. 2)
Collet type: C, K or L
Variant 1)
Contact type:A = male solderC = male crimpL = female solderM = female crimp
Insulator: L = PEEKT = PTFE
Housing:C = brass chrome-platedN = brass nickel-platedB = POM (black)
Model
Series
Insert configuration:coaxial, triaxial, multi coax, coax + LV
® ®
16 www.lemo.com
E series connectors have been specifically designed for outdoor applications.They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket or fixed socket. All models of these series are watertight when mated and give a protection index of IP 68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).– security of the Push-Pull latching system – coaxial, triaxial and mixed contact configurations– watertight connection (IP 68/IP 66) – polarization by stepped insert (half-moon)– solder contacts, print contacts only – 360° screening for full EMC shielding for coaxial and triaxial configurations – rugged housing for extreme working condition.
FFA
FFA
FFA
FZP
FFF
FAA
FLA
HGP
ERAPCA
PCA
PSA
PCA
SWH
EHP
ERB
EBR RMA
EEP
Watertight or vacuumtight modelsFixed sockets
Straight plug
Fixed plug
Elbow plug
Straight plugs Fixed sockets Free sockets
Fixed socket
Free couplerFixed coupler
Models
Model DescriptionEBR Fixed socket with round flange, watertight,
protruding shell and screw fixingEEP Fixed socket, nut fixing (back panel moun-
ting)EHP Fixed socket, nut fixing, protruding shellERA Fixed socket, nut fixingERB Fixed socket, nut fixing with two flats
in the flange FAA Fixed plug non-latching, nut fixingFFA Straight plug, cable collet
FFA Straight plug with oversize cable colletFFA Straight plug, cable collet
and nut for fitting a bend reliefFFF Straight plug non-latching, cable colletFLA Elbow (90°) plug, cable colletFZP Straight plug for remote handling,
cable collet and inner anti-rotating deviceHGP Fixed socket, nut fixing,
watertight or vacuumtightPCA Free socket, cable collet
PCA Free socket with oversize cable colletPCA Free socket, cable collet
and nut for fitting a bend reliefPSA Fixed socket, nut fixing, cable colletRMA Free couplerSWH Fixed coupler, nut fixing, watertight
or vacuumtight
E Series
® ®
www.lemo.com 17
Part Section Showing Internal Components (mixed coax + LV)
45
3
6
87
12
67
12
543
89101112
5 8 1432 3 7 6 1 4 9 11 128 27 6 510Fixed socket outer shellearthing crownretaining ringhexagonal nutinsulatormale coaxial contactfemale contacto-ring
Straight plug
outer shelllatch sleeveinner shellretaining ringcollet nutcentre-pieceinsulatorfemale coaxial contactearthing conecolletgasketwasher
FFA.1E.250.CTAC50 = straight plug with cable collet, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, C type collet for an up to 5.0 mm diameter cable.
PCA.1E.250.CTLC50Z = free socket with cable collet, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, C type collet for an up to 5.0 mm diameter cable and collet nut for fitting a bend relief.
ERA.1E.250.CTL = fixed socket, nut fixing, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator. Note: 1) for mixed contacts, add cable group to the part number. 2) see unipole-multipole catalogue.
Fixed socket
Part Numbering System
Plug
Free socket
F F A 1 E 2 5 0 C T A C 5 0
P C A 1 E 2 5 0 C T L C 5 0 Z
E R A 1 E 2 5 0 C T L
Variant 1)
Cable ø max. 2)
Collet type: C or K
Variant 1)
Contact type:A = male solderL = female solder
Insulator: L = PEEKT = PTFEHousing:C = brass chrome-platedK = brass black chromeT = stainless steel
Model
Series
Insert configuration:coaxial, triaxial, multi coax, coax + LV
® ®
18 www.lemo.com
Stan
dard
Wat
ertig
ht
Impe
danc
e (Ω
)
ø A
(mm
)
Cab
le g
roup
Con
d. ø
max
Die
lect
ric ø
max
i
Max
i S s
erie
s
Max
i E s
erie
s
VSW
R (f
=GH
z)
Test
vol
tage
(kV
rms)
Rat
ed c
urre
nt (A
)
ø A
Ref
eren
ce1-23-4
1-23-4
00
0S0E
1.09+0.11f
1.02+0.25f
1.01+0.23f
1.02+0.08f
1.01+0.95f
1.02+0.03f
1.06+0.5f
1.04+0.05f
1.01+1.9f
1.01+0.12f
1.02+2.3f
Note: 1) see NIM-CAMAC catalogue.
1S1E
2S2E
3S3E
4S4E
5S
Insert configuration (S and E series)Coaxial
Series Sheath ø
2501)
250
250
275
250
275
250
275
250
275
250
00 – 50 0.7 1 to 9 1.05 3.05 5.5 2.1 4
0S 0E 50 0.9 0.95 2.95 6.7 5.0 3.0 6
1S 1E 50 1.6 1.35 3.95 8.5 8.5 3.0 12
1S 1E 75 1.3 5-6-7 1.05 3.95 8.5 8.5 2.4 10
2S 2E 50 2.0 6-7 1.75 5.95 10.5 10.5 3.0 15
2S 2E 75 1.6 6-7 1.35 5.95 10.5 10.5 1.5 12
3S 3E 50 3.0 8 2.65 8.15 13.0 15.0 3.0 26
3S 3E 75 2.0 8 1.75 8.15 13.0 15.0 2.7 15
4S 4E 50 4.0 8-9 3.65 10.05 22.0 23.5 2.1 36
4S 4E 75 3.0 8-9-0 2.65 10.05 22.0 23.5 1.8 26
5S – 50 5.0 9 5.15 17.45 30.0 30.0 3.0 45
® ®
www.lemo.com 19
Triaxial
1S1E
2S2E
3S3E
4S4E
0S0E
Stan
dard
Wat
ertig
ht
Impe
danc
e (Ω
)
ø A
(mm
)
Cab
le g
roup
Con
d. ø
max
Die
lect
ric ø
max
i
Max
i S s
erie
s
Max
i E s
erie
s
VSW
R (f
=GH
z)
Test
vol
tage
(kV
rms)
(con
tact
/scr
een)
Rat
ed c
urre
nt (A
)
ø A
Ref
eren
ce
1.03+0.34f
1.01+0.17f
1.01+0.3f
1.01+0.07f
1.01+0.27f
1.02+0.05f
1.01+0.38f
1.01+0.14f
Series Sheath ø
1.01+0.27f
1.01+0.05f
1.01+0.38f
1.01+0.14f
0S 0E 50 0.9 1-2 0.75 2.95 6.7 5.0 1.0 6
1S 1E 50 0.9 1-2-3 0.75 3.95 8.5 8.5 1.0 6
2S 2E 50 1.6 2-3-4 1.35 5.95 10.5 10.5 1.5 12
2S 2E 75 0.9 4-6 0.75 5.95 10.5 10.5 1.5 6
3S 3E 50 2.0 3-4-5 1.75 8.45 13.0 15.0 2.4 15
3S 3E 75 0.9 4-5 0.75 8.45 13.0 15.0 1.8 6
4S 4E 50 3.0 4-5 2.65 10.05 22.0 23.5 2.7 26
4S 4E 75 2.0 4-5-7 2.25 10.05 22.0 23.5 2.2 15
650
650
650
675
650
675
650
675
® ®
20 www.lemo.com
Mixed: coax + LV, multi coax
ø A
Coax
3S3E
4S4E
Stan
dard
Wat
ertig
ht
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Ref
eren
ce
801
802
803
804
805
806
807
802
803
804
805
806
807
809
810
812
202
832
4S 4E 1 50 5 A1 1-2-3 2 3.0 2.1 3.0 21
4S 4E 1 50 5 A1 1-2-3 3 2.0 2.1 3.0 16
4S 4E 1 50 5 A1 1-2-3 4 1.3 2.7 3.9 13
4S 4E 1 50 5 A1 1-2-3 5 1.3 2.1 3.0 11
4S 4E 1 50 5 A1 1-2-3 6 1.3 2.1 3.0 9
4S 4E 1 50 5 A1 1-2-3 7 1.3 2.1 3.0 8
4S 4E 1 50 5 A1 1-2-3 9 0.9 2.1 3.0 7
4S 4E 1 50 5 A1 1-2-3 10 0.9 2.1 3.0 7
4S 4E 1 50 5 A1 1-2-3 12 0.9 2.1 3.0 7
4S 4E 2 50 5 A1 1-2-3 – – – – –
4S 4E 2 50 5 A1 1-2-3 2 1.3 2.1 3.0 13
Coaxial Low voltageSeries
3S 3E 1 50 5 A1 1-2-3 1 1.3 2.7 3.9 14
3S 3E 1 50 5 A1 1-2-3 2 1.3 1.2 1.8 14
3S 3E 1 50 5 A1 1-2-3 3 1.3 2.7 3.9 14
3S 3E 1 50 5 A1 1-2-3 4 1.3 1.2 1.8 10
3S 3E 1 50 5 A1 1-2-3 5 0.9 1.8 2.4 8
3S 3E 1 50 5 A1 1-2-3 6 0.9 0.8 1.2 8
3S 3E 1 50 5 A1 1-2-3 7 0.9 0.8 1.2 7
® ®
www.lemo.com 21
Mixed: coax + LV, multi coax
4S4E
5S5E
Stan
dard
Wat
ertig
ht
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
ø A
Coax
Ref
eren
ce
282292
834
836
838
842
803
804
804
810
232
832
5075
12 7
4-6 3-4-5
Coaxial Low voltageSeries
– 5E 1 50 12 A 4-6 3 3.0 3.0 4.2 25
5S – 1 50 6 A0 1-3-4 4 3.0 2.1 3.0 22
– 5E 1 75 7 A 3-4-5 4 3.0 2.1 3.0 22
5S 5E 1 50 5 A1 1-2-3 10 1.6 1.8 2.4 11
5S – 2 50 6 A0 1-3-4 – – – – –
5S 5E 2 A – – – – –
5S 5E 2 50 6 A0 1-3-4 2 2.0 2.1 3.0 18
4S 4E 2 50 5 A1 1-2-3 4 1.3 2.1 3.0 13
4S 4E 2 50 5 A1 1-2-3 6 0.9 1.8 2.4 7
4S 4E 2 50 5 A1 1-2-3 8 0.9 1.8 2.4 7
4S 4E 2 50 5 A1 1-2-3 12 0.9 1.8 2.4 7
® ®
22 www.lemo.com
Mixed: coax + LV, multi coax
Stan
dard
Wat
ertig
ht
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
ø A
Coax
Ref
eren
ce
5S5E 834
838
842
846
850
854
234
876
5S 5E 2 50 6 A0 1-3-4 4 2.0 2.1 3.0 18
5S – 2 50 6 A0 1-3-4 8 1.6 1.8 2.4 12
5S 5E 2 50 6 A0 1-3-4 12 1.3 1.8 2.4 9
– 5E 2 75 7 A 3-4-5 16 1.3 0.8 1.2 8
5S – 2 50 6 A0 1-3-4 20 1.3 0.8 1.2 7
5S – 2 50 6 A0 1-3-4 24 1.3 0.8 1.2 6
5S 5E 4 50 5 A1 1-2-3 – – – – –
5S 5E 4 50 5 A1 1-2-3 6 1.3 0.8 1.2 6
Coaxial Low voltageSeries
® ®
www.lemo.com 23
Mixed: coax + LV, multi coax
ø A
Coax
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Ref
eren
ce
6S826
830
858
859
866
867
883
1 75 7 A 3-4-5 26 2.0 1.5 2.1 7
1 75 7 A 3-4-5
2 75 7 A 3-4-5
2 50 5 A1 1-2-3
3 50 6 A0 1-3-4 26 2.0 1.5 2.1 7
3 75 7 A 3-4-5
4 50 4 A1 1-2-3 30 1.6 1.5 2.1 5
492
0.91.6
1.21.2
1.81.8
25
364
1.33.0
1.21.2
1.81.8
414
665
17
1.31.62.01.9
1.21.2 1.21.2
1.81.8 1.81.8
45
102
Coaxial Low voltage
430
3.01.6
1.51.5
2.12.1
145
® ®
24 www.lemo.com
Mixed: coax + LV, multi coax
ø A
Coax
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Ref
eren
ce
6S284294
Coaxial Low voltage
882
887
890
893
238
899
4 A – – – – –
4 75 7 A 3-4-5 26 0.9 0.8 1.2 2
7 2.0 1.5 2.1 10
6 50 5 A1 1-2-3 4 4.0 1.5 2.1 16
6 50 5 A1 1-2-3 20 1.6 1.5 2.1 5
8 50 6 A0 1-3-4 – – – – –
8 50 5 A1 1-2-3 20 1.6 1.5 2.1 5
5075
127
4-63-4-5
14
5050
265
A3A1
7 } 9 3
® ®
www.lemo.com 25
Mixed: coax + LV, multi coax
ø A
Coax
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Ref
eren
ce
Note: 1) The type 6E.805 is delivered with female contacts in the plug.
6E
Coaxial Low voltage
8051)
831
843
847
856
857
865
2412
0.92.0
0.81.5
1.22.1
210
121
2.03.0
1.51.5
2.12.1
1014
214
1.32.0
1.21.2
1.81.8
410
1 75 7 A 3-4-5 5 2.0 1.5 2.1 10
1 75 7 A 3-4-5
2 75 7 A 3-4-5
2 50 5 A1 1-2-3 17 2.0 1.5 2.1 10
2 75 7 A 3-4-5 26 2.0 1.5 2.1 7
2 75 7 A 3-4-5 33 1.3 1.2 1.8 4
3 75 7 A 3-4-5
® ®
26 www.lemo.com
Mixed: coax + LV, multi coax
ø A
Coax
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Test
vol
tage
(kV
rms)
Test
vol
tage
(kV
dc)
Rat
ed c
urre
nt (A
)
Ref
eren
ce
6E866
880
882
884
235
899
3 75 7 A 3-4-5 26 1.3 1.2 1.8 4
4 50 5 A1 1-2-3 20 1.3 1.2 1.8 4
4 75 7 A 3-4-5 20 0.9 0.8 1.2 2
4 75 7 A 3-4-5 38 0.9 0.8 1.2 2
5 50 6 A0 1-3-4 – – – – –
8 50 5 A1 1-2-3 20 1.6 1.5 2.1 5
Coaxial Low voltage
® ®
www.lemo.com 27
Mixed: coax + LV + HV
Ref
eren
ce
Num
ber o
f con
tact
s
Impe
danc
e (Ω
)
Rat
ed c
urre
nt (A
)
Type
(see
pag
e 27
)
Cab
le g
roup
Num
ber o
f con
tact
s
ø A
(mm
)
Num
ber o
f con
tact
s
ø A
(mm
)
ø A
Coax
1.01+0.19f
1.06+0.5f
Coaxial contacts for S and E series
Sheath ø
4S4E
Coax Low voltage(LV)
High voltage(HV)
934 1 50 5 A1 1-2-3 4 0.9 1 2.0
Type
Impe
danc
e (Ω
)
ø A
(mm
)
Con
d. fi
Scre
en fi
Cab
le g
roup
Con
d. ø
max
i
Die
lect
ric ø
max
i
Min
i
Max
i
VSW
R (f
=GH
z)
Test
vol
tage
(kV
rms)
Rat
ed c
urre
nt (A
)
1.01+0.127f
1.06+0.1f
1.01+0.146f
345
123234
46
1.051.051.05
0.550.550.550.950.950.95
1.351.35
3.953.953.95
1.901.901.902.952.952.95
3.953.95
2.23.35.3
2.51.72.21.72.73.3
3.34.3
2.64.16.1
3.02.12.62.13.14.1
4.15.1
A1
A0
A
A3
50 0.7 solder collet 0.9 5
50 0.9 solder collet 3.0 6
50 1.6 solder collet 1.8 12
75 1.3 solder collet 2.4 7
50 3.0 solder collet 7 2.60 8.10 10.0 10.6 3.0 15
® ®
Recommended coaxial cables for 00 Series (page 18)
LEMO cablePart Number Type
LEMOcablegroup
Impedance Conductor Dielectric Screen Sheath (Ω) ø (mm) ø (mm) ø (mm) ø (mm)
Non
stan
dard
Stan
dard
Note: for more details on cable properties, see NIM-CAMAC catalogue.
Recommended triaxial cables for 00 Series (page 13)
LEMO cablePart Number
Impedance Conductor Dielectric Screen 1 Screen 2 Sheath (Ω) ø (mm) ø (mm) ø (mm) ø (mm) ø (mm)
Stan
dard
Type
RG 58 C/U 6 50 ± 2 0.90 2.95 3.60 5.00
RG 142 B/U 7 50 ± 2 0.95 2.95 3.53 / 4.30 5.00
RG 174 /U 3 50 ± 2 0.48 1.50 2.00 2.55
RG 174 A/U 3 50 ± 2 0.48 1.50 2.00 2.80
RG 178 B/U 1 50 ± 2 0.30 0.84 1.30 1.80
RG 179 B/U 2 75 ± 3 0.30 1.50 2.00 2.50
RG 187 A/U 2 75 ± 3 0.30 1.50 2.00 2.60
RG 188 A/U 4 50 ± 2 0.54 1.50 2.00 2.60
RG 195 A/U 5 95 ± 5 0.30 2.52 3.10 3.70
RG 196 A/U 1 50 ± 2 0.30 0.84 1.30 1.95
RG 316 /U 4 50 ± 2 0.54 1.50 2.10 2.60
Huber+Suhner, G02232D-60 8 50 ± 2 0.50 1.50 1.95 / 2.40 3.10
Huber+Suhner, K01152-07 9 50 ± 5 0.19 0.52 0.90 1.25
Storm, 421-099 8 50 ± 2 0.50 1.52 2.00 / 2.50 3.05
CCX.50.RG5.8CU50N
CCX.50.RG1.42BU50M
CCX.50.RG1.74U25N
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26B
CCX.50.RG1.88AU24B
CCX.95.RG1.95AU37B
CCX.50.RG1.96AU20B
CCX.50.RG3.16U26M
RGT 316 50 ± 2 0.51 1.50 2.05 3.15 3.60
RGT 403 50 ± 2 0.30 0.84 1.30 2.35 2.95
RGT 174 50 ± 2 0.48 1.55 1.90 2.90 3.90
RGT 178 50 ± 2 0.30 0.90 1.37 2.30 2.80
Huber + Suhner G 02332 50 ± 2 0.49 1.50 2.00 3.05 4.25
SMT 50 50 ± 2 0.16 0.52 0.85 1.35 1.60
017 410 LEDE
017 820 LEDE
28 www.lemo.com
® ®
Recommended coaxial cables for S and E Series (page 18)
LEMO cablePart Number
LEMO Impedance Conductor Dielectric Screen Sheath cable group (Ω) ø (mm) ø (mm) ø (mm) ø (mm)Type
311 100 LEDE
CCX.50.RG5.8CU50N
CCX.50.RG5.9BU62N
CCX.50.RG1.42BU50M
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26M
CCX.50.RG1.88AU26B
CCX.50.RG1.96AU20B
213 000 LEDE
CCX.50.RG3.16U26M
RG 11 A/U 8 75 ± 2 1.17 7.25 8.15 10.10
RG 12 A/U 0 75 ± 3 1.20 7.25 8.20 11.80
RG 58 C/U 6 50 ± 2 0.90 2.95 3.60 5.00
RG 59 B/U 7 75 ± 3 0.60 3.70 4.50 6.20
RG 115 A/U 8 50 ± 2 2.25 6.50 8.00 10.50
RG 122 /U 4 50 ± 2 0.80 2.50 3.20 4.10
RG 142 B/U 6 50 ± 2 0.95 2.95 4.30 5.00
RG 144 /U 8 75 ± 3 1.35 7.25 8.00 10.40
RG 165 /U 8 50 ± 2 2.46 7.25 8.00 10.40
RG 174 A/U 3 50 ± 2 0.48 1.50 2.00 2.80
RG 178 B/U 1 50 ± 2 0.30 0.84 1.30 1.80
RG 179 B/U 5 75 ± 3 0.30 1.50 2.00 2.50
RG 187 A/U 5 75 ± 3 0.30 1.50 2.00 2.60
RG 188 A/U 2 50 ± 2 0.54 1.50 2.00 2.60
RG 196 A/U 1 50 ± 2 0.30 0.84 1.30 1.95
RG 213 /U 8 50 ± 2 2.25 7.25 8.20 10.30
RG 214 /U 9 50 ± 2 2.25 7.25 8.80 10.80
RG 216 /U 9 75 ± 3 1.20 7.25 8.80 10.80
RG 223 /U 7 50 ± 2 0.89 2.95 4.30 5.40
RG 225 /U 9 50 ± 2 2.40 7.25 8.80 10.90
RG 302 /U 6 75 ± 3 0.64 3.70 4.40 5.10
RG 316 B/U 2 50 ± 2 0.60 1.60 2.10 2.80
RG 400 /U 6 50 ± 2 1.00 2.98 4.20 5.00
HF-2114 Dätwyler 3 50 ± 2 0.48 1.30 1.90 2.70
HF-5408/1 Dätwyler 7 75 ± 3 0.60 3.80 5.60
2YCCY 0.4/2.5 Siemens 6 75 ± 2 0.40 2.50 3.70 4.50
www.lemo.com 29
® ®
30 www.lemo.com
Recommended triaxial cables for S and E Series (page 19)
LEMO Impedance Conductor Dielectric Screen 1 Screen 2 Sheath cable group (Ω) ø (mm) ø (mm) ø (mm) ø (mm) ø (mm)Type
Note: 1) when used with 1S.650 / 1E.650, please request large contact bucket («W» type).
Recommended coaxial cables for mixed coax, multi coax for S and E Series (pages 20 to 26)
LEMO cablePart Number
LEMO Impedance Conductor Dielectric Screen Sheath cable group (Ω) ø (mm) ø (mm) ø (mm) ø (mm)
Note: the cable group number corresponding to the chosen cable must be written in the variant position, see pages 15 and 17.
Type
CCX.50.RG5.8CU50N
CCX.50.RG5.9BU62N
CCX.50.RG1.42BU50M
CCX.50.RG1.74.AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26M
CCX.50.RG1.88AU26B
CCX.50.RG1.96AU20B
213 000 LEDE
CCX.50.RG3.16U26M
RG 58 C/U 6 50 ± 2 0.90 2.95 3.60 5.00
RG 59 B/U 5 75 ± 3 0.60 3.70 4.50 6.20
RG 122 /U 4 50 ± 2 0.80 2.50 3.20 4.10
RG 142 B/U 6 50 ± 2 0.95 2.95 4.30 5.00
RG 174 A/U 1 50 ± 2 0.48 1.50 2.00 2.80
RG 178 B/U 2 50 ± 2 0.30 0.84 1.30 1.80
RG 179 B/U 3 75 ± 3 0.30 1.50 2.00 2.50
RG 187 A/U 3 75 ± 3 0.30 1.50 2.00 2.60
RG 188 A/U 1 50 ± 2 0.54 1.50 2.00 2.60
RG 196 A/U 2 50 ± 2 0.30 0.84 1.30 1.95
RG 213 /U 7 50 ± 2 2.25 7.25 8.20 10.30
RG 223 /U 6 50 ± 2 0.89 2.95 4.30 5.40
RG 302 /U 5 75 ± 3 0.64 3.70 4.40 5.10
RG 316 /U 1 50 ± 2 0.54 1.50 2.10 2.60
RG 400 /U 5 50 ± 2 1.00 2.98 4.20 5.00
LEMO cablePart Number
CTR.50.RG1.78BU29M
CTR.50.RG1.74AU39N
375 029 LEDE
466 140 LEDE
RGT 178 1 50 ± 2 0.30 0.90 1.37 2.30 2.80
RGT 174 2 50 ± 2 0.48 1.55 1.90 2.90 3.90
9222 Belden 1) 3 50 ± 2 0.94 2.90 3.50 5.20 6.10
HF-2318 Dätwyler 5 50 ± 2 1.60 4.80 – – 10.20
8215 Belden 4 75 ± 3 0.72 4.55 – – 8.43
8232A Belden 4 75 ± 3 0.80 3.70 – – 8.00
HF-2426 Dätwyler 4 75 ± 3 0.60 3.70 – – 8.00
RGT 179 6 75 ± 3 0.30 1.60 2.10 3.10 3.60
Triax 8 Nokia 4 75 ± 3 1.00 4.50 5.20 7.20 8.50
9267 Belden 5 75 ± 3 0.84 3.70 – – 9.20
Triax 11 Nokia 7 75 ± 3 1.40 6.50 7.20 9.40 10.90
8233A Belden 7 75 ± 3 1.60 7.30 – – 12.10
® ®
www.lemo.com 31
® ®
32 www.lemo.com
® ®
www.lemo.com 33
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS SITUATIONS.
1. SHOCK AND FIRE HAZARDIncorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue (such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.Mated components should never be disconnected while live as this may result in an exposed electric arc and local overheating, resulting in possible damage to components.
2. HANDLINGConnectors and their components should be visually inspected for damage prior to installation and assembly. Suspect components should be rejected or returned to the factory for verification.Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used during installation and / or assembly in order to obtain safe and reliable performance.
3. USEConnectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGESThe maximum admissible operating voltage depends upon the national or international standards in force for the application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the catalog however these may be influenced by PC board design and / or wiring harnesses.The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the test duration is 1 minute.
5. CE MARKINGCE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives.CE marking applies to complete products or equipment, but not to electromechanical components, such as connectors.
6. PRODUCT IMPROVEMENTSThe LEMO Group reserves the right to modify and improve to our products or specifications without providing prior notification.
Product safety notice
No reproduction or use without express permission of editorial or pictorial content, in any manner.LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
Data subject to change
LEMO HEADQUARTERS
SWITZERLANDLEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 EcublensTel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: [email protected]
LEMO SUBSIDIARIES
LEMO DISTRIBUTORSARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE
www.lemo.com
AUSTRIALEMO Elektronik GesmbHLemböckgasse 49/E6-31230 WienTel: (+43 1) 914 23 20 0Fax:(+43 1) 914 23 20 [email protected]
BRAZILLEMO Latin America LtdaAv. José Rocha Bonfim, 214 Salas 224 / 225Condomínio Praça CapitalEd. ChicagoCampinas / SP - Brasil 13080-650Tel: +55 (11) 98689 [email protected]
CANADALEMO Canada Inc44 East Beaver Creek Road, unit 20Richmond Hill, Ontario L4B 1G8Tel: (+1 905) 889 56 78Fax: (+1 905) 889 49 [email protected]
CHINA / HONG KONGLEMO Electronics (Shanghai) Co., Ltd First Floor, Block E,18 Jindian Road, PudongShanghai, China, 201206Tel: (+86 21) 5899 7721Fax: (+86 21) 5899 [email protected]
DENMARKLEMO Denmark A/SNybrovej # 972820 GentofteTel: (+45) 45 20 44 00Fax: (+45) 45 20 44 [email protected]
FRANCELEMO France Sàrl24/28 Avenue Graham BellBâtiment Balthus 4Bussy Saint Georges77607 Marne la Vallée Cedex 3Tel: (+33 1) 60 94 60 94Fax: (+33 1) 60 94 60 [email protected]
GERMANYLEMO Elektronik GmbHHanns-Schwindt-Str. 681829 München Tel: (+49 89) 42 77 03Fax: (+49 89) 420 21 [email protected]
HUNGARYREDEL Elektronika KftNagysándor József u. 6-121201 BudapestTel: (+36 1) 421 47 10Fax: (+36 1) 421 47 [email protected]
ITALYLEMO Italia srlViale Lunigiana 2520125 MilanoTel: (+39 02) 66 71 10 46Fax: (+39 02) 66 71 10 [email protected]
JAPANLEMO Japan Ltd2-7-22, Mita, Minato-ku, Tokyo, 108-0073Tel: (+81 3) 54 46 55 10Fax: (+81 3) 54 46 55 [email protected]
MIDDLE EASTLEMO Middle East Gen. Trad. LLCConcorde Tower 6th Floor, Dubai Media City, P.O. Box 126732Dubai, United Arab EmiratesTel: +971 55 222 36 [email protected]
NETHERLANDS / BELGIUMLEMO Connectors BeneluxDe Trompet 10601967 DA HeemskerkTel. (+31) 251 25 78 20Fax (+31) 251 25 78 [email protected]
NORWAY / ICELANDLEMO Norway A/SSoerumsandvegen 69,1920 SoerumsandTel: (+47) 22 91 70 40Fax: (+47) 22 91 70 [email protected]
SINGAPORELEMO Asia Pte Ltd4 Leng Kee Road, #06-09 SiS Building Singapore 159088Tel: (+65) 6476 0672Fax: (+65) 6474 [email protected]
SPAIN / PORTUGALIBERLEMO SAUBrasil, 45, 08402 GranollersBarcelonaTel: (+34 93) 860 44 20Fax: (+34 93) 879 10 [email protected]
SWEDEN / FINLANDLEMO Nordic ABMariehällsvägen 39A 168 65 BrommaTel: (+46 8) 635 60 60Fax: (+46 8) 635 60 [email protected]
SWITZERLANDLEMO Verkauf AGGrundstrasse 22 B, 6343 RotkreuzTel: (+41 41) 790 49 [email protected]
UNITED KINGDOMLEMO UK Ltd12-20 North Street, Worthing, West Sussex, BN11 1DUTel: (+44 1903) 23 45 [email protected]
USALEMO USA IncP.O. Box 2408Rohnert Park, CA 94927-2408Tel: (+1 707) 578 88 11(+1 800) 444 53 66Fax:(+1 707) 578 08 [email protected] ©
CA
T.C
T.LE
N.P
0410
, upd
ated
Mar
ch 2
018