contentsthepartscentre.co.uk/media/downloads_new/consumableparts/01... · set screws high tensile -...

18
3 Contents Electrical Assembly Light + Power Threaded Fasteners Fixings + Hardware Tubing + Air Line Tyre Shop + Automotive Grease + Chemicals Sealants + Adhesives Hygiene + Safety Welding + Abrasives Cutting + Drilling General Hand Tools Specialist Auto Tools Storage + Security Index Threaded Fasteners 4 Fixings + Hardware 8 Automotive 15 Tube Fittings 16 Grease Nipples 17 Electrical Assembly 17 Empty Boxes + Storage 20 Important Info About Zinc-Gold Hardware Due to the use of hexavalent chromium in Zinc-Gold Plating, this finish will be gradually phased out to be replaced by a Zinc Coloured Finish. The End of Life Vehicle Directive (ELVD) (European Union legislation 2000/53/EC, September 18, 2000) ensures that materials do not contain hexavalent chromium in corrosion-preventative coatings. Assorted Boxes

Upload: hoangthuan

Post on 03-Aug-2018

217 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

3

ContentsElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

Index

Threaded Fasteners 4 Fixings + Hardware 8 Automotive 15 Tube Fittings 16 Grease Nipples 17 Electrical Assembly 17 Empty Boxes + Storage 20

Important Info About Zinc-Gold HardwareDue to the use of hexavalent chromium in Zinc-Gold Plating, this finish will be gradually phased out to be replaced by a Zinc Coloured Finish.

The End of Life Vehicle Directive (ELVD) (European Union legislation 2000/53/EC, September 18, 2000) ensures that materials do not contain hexavalent chromium in corrosion-preventative coatings.

Assorted Boxes

Page 2: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

4

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Set Screws + Fasteners

Set Screws High Tensile - MetricZinc.DIN 933 Grade 8.8.

AB9 150 Pieces1 x M5: x 25 mm.1 x M6: x 25 mm.2 x M8: x 25, 40 mm.2 x M10: x 25, 40 mm.

Set Screws High Tensile - MetricZinc.DIN 933 Grade 8.8.

AB564 290 Pieces2 x M4: x 10, 20 mm.3 x M5: x 10, 16, 30 mm.5 x M6: x 10, 12, 16, 20, 30 mm.4 x M8: x 16, 20, 30, 40 mm.2 x M10: x 25, 30 mm.3 x M12: x 20, 30, 40 mm.

Set Screws High Tensile - Metric FineZinc. DIN 961 Grade 8.8.

AB11 150 Pieces1 x M5 (x 0.50 mm Pitch): x 25 mm.1 x M6 (x 0.75 mm Pitch): x 25 mm.2 x M8 (x 1.00 mm Pitch): x 25, 40 mm.1 x M10 (x 1.25 mm Pitch): x 40 mm.

M5 FastenersZinc. DIN 933 Grade 8.8 (Set Screws High Tensile). DIN 934 (Steel Nuts). DIN 125 (Flat Washers).

AB163 440 Pieces5 x Set Screws: M5 x 16, 20, 25, 40, 50 mm.1 x Steel Nuts: M5.1 x Flat Washers: M5.

M5

M6 FastenersZinc. DIN 933 Grade 8.8 (Set Screws High Tensile). DIN 934 (Steel Nuts). DIN 125 (Flat Washers).

AB128 415 Pieces5 x Set Screws: M6 x 16, 20, 25, 35, 50 mm.1 x Steel Nuts: M6.1 x Flat Washers: M6.

M6

M8 FastenersZinc. DIN 933 Grade 8.8 (Set Screws High Tensile). DIN 934 (Steel Nuts). DIN 125 (Flat Washers).

AB129 220 Pieces5 x Set Screws: M8 x 20, 25, 40, 50, 75 mm.1 x Steel Nuts: M8.1 x Flat Washers: M8.

M8

M10 FastenersZinc. DIN 933 Grade 8.8 (Set Screws High Tensile). DIN 934 (Steel Nuts). DIN 125 (Flat Washers).

AB130 145 Pieces5 x Set Screws: M10 x 25, 40, 50, 75 mm.1 x Steel Nuts: M10.1 x Flat Washers: M10.

M10

Stainless Steel Set Screws - MetricStainless Steel.DIN 933 Grade A2.

AB154 120 Pieces1 x M5: x 25 mm.1 x M6: x 25 mm.1 x M8: x 25 mm.1 x M8: x 40 mm.2 x M10: x 25, 40 mm.

Set Screws High Tensile - UNCZinc.ANSI B18.2.1.1965 Grade 8.8 Equivalent.

AB7 150 Pieces2 x 1/4" UNC: x 3/4", x 1".2 x 5/16" UNC: x 1", x 1 1/2".2 x 3/8" UNC: x 1", x 1 1/2".

Set Screws High Tensile - UNFZinc.ANSI B18.2.1.1965 Grade 8.8 Equivalent.

AB5 150 Pieces1 x 3/16" UNF: x 1".1 x 1/4" UNF: x 1".2 x 5/16" UNF: x 1", x 1 1/2".2 x 3/8" UNF: x 1", 1 1/2".

Serrated Flanged Set Screws High Tensile - MetricZinc. DIN 6922 Grade 8.8.

AB133 105 Pieces4 x M6: x 16, 20, 25, 30 mm.4 x M8: x 20, 25, 30, 40 mm.4 x M10: x 25, 30, 40, 50 mm.

Set Screws High Tensile & Nuts - MetricZinc. DIN 933 Grade 8.8 (Set Screws High Tensile). DIN 934 (Steel Nuts).

AB170 240 Pieces4 x Set Screws: M6 x 25 mm, M8 x 25 mm, M8 x 40 mm, M10 x 40 mm.3 x Steel Nuts: M6, M8, M10

Page 3: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

5

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Socket + Machine Screws

Socket Screws Button Head - Metric BlackBlack. Grade 10.9.

AB204 110 Pieces2 x M5: x 12, x 16 mm.1 x M6: x 16 mm.3 x M8: x 10, 20, 25 mm.1 x M10: x 40 mm.

Socket Screws Cap Head - Metric Zinc.DIN 912 Grade 8.8.

AB563 300 Pieces2 x M3: x 8, 16 mm.2 x M4: x 20, 30 mm.6 x M5: x 10, 16, 25, 30, 35, 40 mm.4 x M6: x 20, 25, 30, 35 mm.4 x M8: x 16, 20, 30, 45 mm.3 x M10: x 25, 30, 40 mm.1 x M12: x 25 mm.

Machine Screws (Body Screws) Pan Head, Pozi - MetricZinc. DIN 7985.

AB134 250 Pieces2 x M5: x 20, 25 mm.2 x M6: x 20, 25 mm.2 x M8: x 20, 25 mm.

Machine Screws (Body Screws) Countersunk, Pozi - MetricZinc. DIN 965.

AB135 250 Pieces2 x M5: x 20, 25 mm.2 x M6: x 20, 25 mm.2 x M8: x 20, 25 mm.

Bolts High Tensile - MetricZinc.DIN 931.

AB215 88 Pieces1 x M4: x 25 mm.2 x M5: x 30, 40 mm.1 x M6: x 55 mm.1 x M8: x 65 mm.

1 x M10: x 80 mm.1 x M12: x 45 mm.1 x M16: x 60 mm.

Socket Screws Knurled Cup Point - MetricSelf Coloured. DIN 916 Grade 14.9.

AB171 240 Pieces2 x M3: x 12, 16 mm.2 x M4: x 12, 16 mm.2 x M5: x 12, 16 mm.2 x M6: x 12, 16 mm.2 x M8: x 12, 16 mm.2 x M10: x 12, 16 mm.

Socket Screws Cap Head - Metric BlackBlack. DIN 912 Grade 12.9.

AB92 100 Pieces2 x M5: x 30, 40 mm.2 x M6: x 30, 40 mm.2 x M8: x 30, 40 mm.2 x M10: x 30, 40 mm.

Socket Screws Cap Head - Metric BlackBlack. DIN 912 Grade 12.9.

AB562 270 Pieces2 x M4: x 12, 20 mm.4 x M5: x 16, 20, 30, 40 mm.5 x M6: x 12*, 16, 20, 30, 40 mm.5 x M8: x 12, 20, 25*, 30, 40 mm.

2 x M10: x 30, 40.1 x M12: x 50.

*Low Head Type.

Machine Screws with Nuts, Round Head, Slotted - BAZinc. BS 57.

AB3 1,025 Pieces8 x Machine Screws: 6BA x 3/4", 6BA x 1", 4BA x 3/4", 4BA x 1", 4BA x 2", 2BA x 1, 2BA x 1 1/2", 2BA x 2".3 x Nuts: 6BA, 4BA, 2BA.

Machine Screws with Nuts, Round Head, Slotted - BABrass. BS 57.

AB4 600 Pieces10 x Machine Screws: 6BA x 1/2", 6BA x 3/4", 6BA x 1", 4BA x 1/2", 4BA x 3/4", 4BA x 1", 2BA x 1/2", 2BA x 3/4", 2BA x 1", 2BA x 1 1/2".3 x Nuts: 6BA, 4BA, 2BA.

Machine Screws with Nuts & Washers, Pan Head, Slotted - MetricZinc. DIN 85 & DIN 934.

AB68 840 Pieces6 x Machine Screws: M3 x 8 mm, M3 x 20 mm, M4 x 20 mm, M4 x 40 mm, M5 x 25 mm, M5 x 50 mm.3 x Nuts: M3, M4, M5.3 x Washers: M3, M4, M5.

Machine Screws Cheese Head & Countersunk, Slotted - MetricZinc. DIN 84 Grade 4.8.

AB209 460 Pieces8 x Cheese Head, M3: x 6, 8, 10, 12, 20, 25, 30, 50 mm.2 x Cheese Head, M4: x 6, 12 mm.1 x Cheese Head, M5: x 8 mm.1 x Countersunk Slotted, M4: x 8 mm.1 x Countersunk Slotted, M6: x 12 mm.

Page 4: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

6

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Grub Screws + Nuts

Steel Nuts - MetricZinc.DIN 934.

AB10 370 Pieces4 x Sizes: M5, M6, M8, M10.

Steel Nuts - MetricZinc.DIN 934.

AB202 255 Pieces8 x Sizes: M4, M5, M6, M8, M10, M12, M14, M16.

Steel Nuts - Metric FineZinc.DIN 934.

AB12 370 Pieces4 x Sizes (x Pitch): M5 (x 0.50 mm), M6 (x 0.75 mm), M8 (x 1.00 mm), M10 (x 1.25 mm).

Stainless Steel Nuts - MetricStainless Steel.DIN 934 Grade A2.

AB155 250 Pieces4 x Sizes: M5, M6, M8, M10.

Grub Screws - MetricBlack.DIN 916.

AB17 250 Pieces1 x M4: x 8 mm.2 x M5: x 5, 10 mm.3 x M6: x 6, 8, 10 mm.3 x M8: x 8, 10, 12 mm.1 x M10: x 10 mm.

Grub Screws - UNFBlack.DIN 916.

AB16 225 Pieces3 x 3/16" UNF: x 3/16", 1/4", 3/8".3 x 1/4" UNF: x 1/4", 5/16", 7/16".2 x 5/16" UNF: x 5/16, 3/8".1 x 3/8" UNF: x 3/8".

Grub Screws - UNC/BSWBlack.DIN 916.

AB18 275 Pieces4 x 3/16" UNC/BSW: x 3/16", 1/4", 5/16", 3/8".3 x 1/4" UNC/BSW: x 1/4", 5/16", 1/2".3 x 5/16" UNC/BSW: x 1/4, 5/16", 1/2".1 x 3/8" UNC/BSW: x 3/8".

Grub Screws - MetricBlack. Flat Point, Cone Point, Dog Point.

AB219 130 Pieces3 x Flat Point: M5 x 10, M8 x 35, M8 x 40.2 x Cone Point: M6 x 12, M8 x 12.2 x Dog Point: M8 x 16, M10 x 25.

Steel Nuts - UNFZinc.ANSI B18.2.2.

AB6 370 Pieces4 x UNF: 3/16", 1/4", 5/16", 3/8".

Steel Nuts - UNCZinc.ANSI B18.2.2.

AB8 370 Pieces3 x UNC: 1/4", 5/16", 3/8".

Nylon Lock Nuts - MetricZinc.DIN 982.

AB15 300 Pieces4 x Sizes: M6, M8, M10, M12.

Nylon Lock Nuts - MetricZinc.DIN 985.

AB201 255 Pieces8 x Sizes: M4, M5, M6, M8, M10, M12, M14, M16.

Page 5: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

7

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Nuts + Washers

Wing Nuts - Metric & UNC/BSWZinc.

AB79 130 Pieces4 x Metric Sizes: M5, M6, M8, M10.4 x UNC/BSW Sizes: 3/16", 1/4", 5/16", 3/8".

Thin (Half) Nuts & Wing Nuts - MetricZinc. DIN 439 (Thin Nuts).

AB203 140 Pieces5 x Thin Nuts: M8, M10, M12, M14, M16.2 x Wing Nuts: M6, M8.

Flat Washers 'Form A' - MetricZinc.DIN 125 Type A. Heavy Gauge.

AB76 1,150 Pieces9 x Sizes: M3, M4, M5, M6, M8, M10, M12, M16, M20.

Flat Washers 'Table 3' - ImperialZinc.BS 3410 Table 3 (Heavy Gauge).

AB20 1,000 Pieces6 x Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2".

Stainless Steel Nylon Lock Nuts - MetricStainless Steel. DIN 985 Grade A2.

AB156 250 Pieces4 x Sizes: M5, M6, M8, M10.

Nylon Lock Nuts - UNFZinc.BS 4929 Equivalent.

AB13 300 Pieces5 x UNF: 1/4", 5/16", 3/8", 7/16", 1/2".

Nylon Lock Nuts - UNCZinc.BS 4929 Equivalent.

AB14 300 Pieces4 x UNC: 1/4", 5/16", 3/8", 1/2".

Serrated Flange Nuts - MetricZinc.DIN 6923.

AB104 370 Pieces5 x Sizes: M5, M6, M8, M10, M12.

Mixed FastenersWavy Washers, Dowel Pins, E-Retainers (Black), Flat Washers (Zinc), Serrated Flange Nuts.DIN 7349 (Flat Washers), DIN 6923 (Flange Nuts).

AB217 140 Pieces2 x Wavy Washers: M8, M10.1 x Dowel Pins: 3 x 24 mm.1 x E-Retainers: 10.0 mm.2 x Flat Washers: M8, M20.1 x Serrated Flange Nuts: M8.

Stainless Steel Flat Washers - MetricStainless Steel. BS 4320 [Table 1] Form B. *DIN 125A (BS 4320 [Table 1] Form A) A2 Grade.

AB157 650 Pieces4 x Sizes: M5*, M6, M8, M10.

Flat Washers 'Form C' - MetricZinc.BS 4320 Form C.

AB119 495 Pieces8 x Sizes: M6, M8, M10, M12, M14, M16, M20, M24.

Flat Washers 'Table 4' - ImperialZinc.BS 3410 Table 4 (Heavy Gauge).

AB109 530 Pieces8 x Sizes: 3/16" x 1/2", 1/4" x 5/8", 5/16" x 3/4", 3/8" x 7/8", 7/16" x 1", 1/2" x 1 1/8", 9/16" x 1 1/4", 5/8" x 1 3/8".

Page 6: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

8

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Washers

Lock Washers Serrated - InternalZinc. DIN 6798.

AB27 1,000 Pieces6 x Sizes: M5, M6, M8, M10, M11, M13.

Lock Washers Serrated - ExternalZinc.

AB208 490 Pieces8 x Sizes: M4, M5, M6, M8, M10, M12, M14, M16.

Shim WashersZinc.

AB28 400 Pieces8 x 0.010 Thick: 3/16" x 7/16", 1/4" x 9/16", 5/16" x 5/8", 3/8" x 3/4", 7/16" x 7/8", 1/2" x 1", 5/8" x 1 1/4", 3/4" x 1 1/2".7 x 0.015 Thick: 1/4" x 9/16", 5/16" x 5/8", 3/8" x 3/4", 7/16" x 7/8", 1/2" x 1", 5/8" x 1 1/4", 3/4" x 1 1/2".

Copper WashersWS 086.

AB24 475 Pieces6 x Sizes: 3/16" x 7/16", 1/4" x 9/16", 5/16" x 5/8", 3/8" x 3/4", 7/16" x 7/8", 1/2" x 1" (M5, 6, 8, 10, 12).

Sealing Washers

are on Page 12

Repair WashersZinc.

AB22 240 Pieces6 x Sizes (I.D. x O.D.): 3/16" x 1", 1/4" x 1", 1/4" x 1 1/2", 5/16" x 1", 5/16" x 1 1/2", 3/8" x 1 1/2" (M5, M6, M8, M10).

Spring Washers - MetricZinc. Rectangular Section.DIN 127B.

AB77 1,015 Pieces7 x Sizes: M5, M6, M8, M10, M12, M16, M20.

Spring Washers - ImperialZinc. Rectangular Section ANSI B18.21.1 Table 2.

AB21 1,025 Pieces6 x Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2".

Stainless Steel Spring Washers - MetricSquare Section. Stainless Steel.DIN 7980 Grade A2.

AB158 650 Pieces4 x Sizes: M5, M6, M8, M10.

Self-Drilling Screws Pan Head - PhillipsZinc. DIN 7504N.

AB137 500 Pieces3 x No, 6: x 1/2", 3/4", 1".3 x No. 8: x 1/2", 3/4", 1".5 x No. 10: x 1/2", 3/4", 1", 1 1/2", x 2".

Self-Drilling Screws Hex HeadZinc. DIN 7504K.

AB138 400 Pieces3 x No. 8: x 1/2", 3/4", 1".3 x No. 10: x 1/2", 3/4", 1".3 x No. 12: x 1", 1 1/2", 2".

Multi-Use Screws Countersunk PoziZinc.

AB140 525 Pieces3 x No. 6: x 3/4", 1", 1 1/2".4 x No. 8: x 3/4", 1", 1 1/2", 2".3 x No. 10: x 1 1/2", 2", 2 1/2".1 x No. 12: x 2".

Self-Tapping Screws - Various TypesZinc. Pan Head - Pozi, Countersunk - Slotted and Countersunk Raised Head - Pozi.

AB210 330 Pieces3 x Pan Pozi: 3.5 x 13, 4.2 x 19, 4.8 x 19 mm.3 x Countersunk Raised Pozi: 2.9 x 9.5, 4.8 x 19, 6.3 x 25 mm.2 x Countersunk Slotted: 4.2 x 13, 4.2 x 1 mm.

'

Page 7: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

9

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Self Tapping Screws

Self-Tapping Screws Pan Head - Pozi (Small Sizes)AB Type. Zinc. DIN 7981/C/Z.

AB2 700 Pieces1 x No. 4: x 1/2".2 x No. 6: x 1/2", 3/4".3 x No. 8: x 1/2", 3/4", 1".3 x No. 10: x 1/2", 3/4", 1".2 x No. 12: x 3/4", 1".

Self-Tapping Screws Pan Head - Pozi (Large Sizes)AB Type. Zinc. DIN 7981/C/Z.

AB94 300 Pieces4 x No, 10: x 1/2", 3/4", 1", 1 1/2".3 x No. 12: x 3/4", 1", 1 1/2".2 x No. 14: x 1", 1 1/2".

Self-Tapping Screws Pan Head - PoziAB Type. Zinc. DIN 7981/C/Z.

AB507 1,150 Pieces1 x No. 4: x 1/2".3 x No. 6: x 1/2", 3/4", 1".3 x No. 8: x 1/2", 3/4", 1".4 x No. 10: x 1/2", 3/4", 1", 1 1/2".3 x No. 12: x 3/4", 1", 1 1/2".2 x No. 14: x 1", 1 1/2".

'Storage Rack + Empty Boxes are on Page 20

Self-Tapping Screws Pan Head - Slotted (Small Sizes)AB Type. Zinc. DIN 7971/C.

AB1 700 Pieces1 x No. 4: x 1/2".2 x No. 6: x 1/2", 3/4".3 x No. 8: x 1/2", 3/4", 1".3 x No. 10: x 1/2", 3/4", 1".2 x No. 12: x 3/4", 1".

Self-Tapping Screws Pan Head - Slotted (Large Sizes)AB Type. Zinc. DIN 7971/C.

AB93 300 Pieces4 x No. 10: x 1/2", 3/4", 1", 1 1/2".3 x No. 12: x 3/4", 1", 1 1/2".2 x No. 14: x 1", 1 1/2".

Self-Tapping Screws Countersunk - PoziAB Type. Zinc. DIN 7982/C/Z.

AB63 600 Pieces4 x No. 6: x 5/8", 3/4", 1", 1 1/2".4 x No. 8: x 5/8", 3/4", 1", 1 1/2".4 x No. 10: x 5/8", 3/4", 1", 1 1/2".

Stainless Steel Self-Tapping Screws Pan Head - PoziAB Type. Stainless Steel. DIN 7981 Grade A2.

AB141 450 Pieces3 x No. 6: x 1/2", 3/4", 1".3 x No. 8: x 1/2", 3/4", 1".3 x No. 10: x 1/2", 3/4", 1".

Self-Tapping Screws Flanged Pan Head - TORX® BlackAB Type. Black. BS 4174.

AB168 500 Pieces1 x No. 6: x 5/8".1 x No. 7: x 3/4".3 x No. 8: x 5/8", 3/4", 1".1 x No. 10: x 5/8".

Self-Tapping Screws Pan Head - Pozi BlackAB Type. Black. DIN 7981/C/Z.

AB131 700 Pieces1 x No. 4: x 1/2".2 x No. 6: x 1/2", 3/4".3 x No. 8: x 1/2", 3/4", 1".2 x No. 10: x 3/4", 1".

Self-Tapping Screws Flanged - Pozi BlackAB Type. Black. BS 4174.

AB71 700 Pieces2 x No. 6: x 1/2", 3/4".3 x No. 8: x 1/2", 3/4", 1", 1 1/2.3 x No. 10: x 1/2", 3/4", 1".

Self-Tapping Screws Flanged Pan Head - PoziAB Type. Black. BS 4174.

AB506 1,250 Pieces6 x No. 6: x 3/8", 1/2", 5/8", 3/4", 1", 3/8".5 x No. 8: x 1/2", 5/8", 3/4", 1", 1 1/2".4 x No. 10: x 1/2", 5/8", 3/4", 1".

Page 8: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

10

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Body + Trim Fixings

Locking NutsAB153 220 Pieces3 x Round: FIX9, FIX28, FIX38.1 x Reverse Round: FIX71.1 x Square: FIX23. 1 x Square Reverse: FIX22.2 x Large Locking Nuts: FIX73, FIX74.

Number Plate FastenersWhite, Yellow.

AB62 200 Pairs1 x Self-Tapping Screw, Pan Head - Pozi: 8 x 3/4" (4.9 x 19 mm).2 x Hinged Caps: White, Yellow.2 x Plastic Bolts & Nuts: White, Yellow.

Trim Fixings for VW/AUDIBox ‘B’

AB511 125 Pieces2 x Trim Buttons: FIX61, FIX79.7 x Panel Clips: FIX37, FIX47, FIX80, FIX81, FIX82, FIX83, FIX160.7 x Moulding Clips: FIX49, FIX63, FIX64, FIX84, FIX85, FIX86, FIX87.

Trim Fixings for VW/AUDIBox 'A'

AB510 175 Pieces3 x Trim Buttons: FIX46, FIX58, FIX59.2 x Push Rivets: FIX107, FIX108.7 x Drive Rivets: FIX65, FIX66, FIX96, FIX97, FIX98, FIX99, FIX100.11 x Locking Nuts: FIX71, FIX73, FIX131, FIX133, FIX134, FIX135, FIX136, FIX137, FIX138, FIX139, FIX140.1 x Bonnet Stay Clips: FIX68.

Trim ButtonsAB151 220 Pieces1 x Canoe Clip: FIX1.1 x Self Pierce: FIX34.1 x Trim Buttons: FIX35 .2 x Multi-Step: FIX30, FIX33.3 x Fir-Tree Fixings: FIX20, FIX21, FIX29.

Trim Buttons & ClipsAB52 300 Pieces1 x Canoe Clips: FIX1.1 x Self Pierce: FIX341 x Multi-Step: FIX30.2 x Fir Trees: FIX20, FIX21.1 x Panel Clips: FIX37.

Body FixingsAB69 280 Pieces1 x Canoe Clips: FIX1.1 x Self Pierce: FIX34.2 x Multi-Step: FIX30, FIX33.3 x Fir-Trees: FIX20, FIX21, FIX29.1 x Panel Clips: FIX7.5 x Lock Nuts: FIX9, FIX22, FIX23, FIX28, FIX71.1 x Friction Bushes: FIX6.

Screw-Type RivetsAB172 120 Pieces8 x Sizes: FIX31, FIX117, FIX118, FIX119, FIX120, FIX121, FIX122, FIX123.

Trim Fixings for GMAB802 130 Pieces1 x Drive Rivets: FIX39.1 x Badge Fixing: FIX67.1 x Rivet: FIX70.3 x Drive Rivets: FIX103, FIX104, FIX106.2 x Push Rivets: FIX109, FIX110.4 x Locking Nuts: FIX141, FIX142, FIX144, FIX145.

Trim Fixings for FordAB801 105 Pieces2 x Trim Buttons: FIX35, FIX36.3 x Panel Clips: FIX37, FIX47, FIX48.1 x Badge Fixing: FIX67.1 x Locking Nuts: FIX74.1 x Pipe Clips: FIX69.1 x Cable Harness Clips: FIX60.

Trim Fixings for BMWAB803 120 Pieces1 x Panel Clips: FIX47.1 x Drive Rivets: FIX105.4 x Push Rivets: FIX111, FIX112, FIX113, FIX114.2 x Screw Rivets: FIX124, FIX125.3 x Locking Nuts: FIX146, FIX147, FIX148.1 x U-Nuts: FIX154.

Trim Fixings for MercedesAB804 100 Pieces1 x Push Rivets: FIX116.2 x Locking Nuts: FIX146, FIX147.4 x Screw-Type Rivets: FIX117, FIX125, FIX126, FIX129.6 x Screws: FIX149, FIX150, FIX151, FIX152, FIX153, FIX155.

Page 9: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

11

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Body + Trim Fixings

Sheet Metal Screws with Captive WashersBS 4174.

AB132 300 Pieces2 x 8 (4.2 mm): x 1/2" (13 mm), 3/4" (19 mm).2 x 10 (4.8 mm): x 1/2" (13 mm), 3/4" (19 mm).2 x 12 (5.5 mm): x 1/2" (13 mm), 3/4" (19 mm).2 x 14 (6.3 mm): x 1/2" (13 mm), 3/4" (19 mm).

Sheet Metal Screws, U-Nuts & J-NutsAB504 600 Pieces3 x Washer Faced Screws: 8 x 3/4" (4.2 x 19 mm), 10 x 3/4" (4.8 x 19 mm), 12 x 3/4" (5.5 x 19 mm).8 x Captive Washer Screws: 8 x 1/2" (4.2 x 13 mm), 8 x 3/4" (4.2 x 19 mm), 10 x 1/2" (4.8 x 13 mm), 10 x 3/4" (4.8 x 19 mm), 12 x 1/2" (5.5 x 13 mm), 12 x 3/4" (5.5 x 19 mm), 14 x 1/2" (6.3 x 13 mm), 14 x 3/4" (6.3 x 19 mm).6 x U-Nuts: No. 8 (4.2 mm) (3 x Sizes), No. 10 (4.8 mm), No. 12 (5.5 mm), No. 14 (6.3 mm).1 x J-Nuts: No. 14 (6.3 mm).

Sheet Metal Screws & J-NutsBS 4174.

AB51 400 Pieces3 x Washer-Faced Screws: No. 8, 10, 12.1 x Screws with Captive Washers: No. 14.4 x J-Nuts: No. 8, 10, 12, 14.

U-Nuts (Speed Fasteners)Zinc.

AB166 200 Pieces10 x Sizes: No. 4, 6 (x 2), 8 (x 4),10, 12, 14.

Drive RivetsAB152 220 Pieces8 x Sizes: FIX31, FIX39, FIX42, FIX43, FIX44, FIX45, FIX65, FIX66.

AVDEL 'Avex' Multigrip Rivets with WashersAluminium.

AB48 500 Pieces2 x Standard Flange, 3.2: x 10, 13 mm.2 x Standard Flange, 4.0: x 12, 15 mm.2 x Standard Flange, 4.8: x 13, 19 mm.1 x Large Flange, 4.8: x 19 mm.1 x Washers: M3 x 13.

POP Rivets - Sealed Type (Closed End)Aluminium. DIN 7337.

AB146 200 Pieces6 x Sizes: 4.8 x 10, 11, 13, 14, 16, 18 mm.

Black RivetsBlack Anodised Aluminium.

AB112 200 Pieces1 x Standard Flange, 3.2: x 8 mm.1 x Standard Flange, 4.0: x 10.1 x Standard Flange, 4.8: x 14 mm.1 x Large Flange, 3.2: x 10 mm.2 x Large Flange, 4.0: x 10, 14 mm.2 x Large Flange, 4.8: x 14, 18 mm.

U-Nuts & J-Nuts (Speed Fasteners)Zinc.

AB49 300 Pieces4 x U-Nuts: No. 6, 8, 10, 12.4 x J-Nuts: No. 8, 10, 12, 14.

Flat Clips (Push-on Fixes)Zinc.

AB50 1,000 Pieces6 x Round: 3/32", 1/8", 3/16", 1/4", 5/16", 3/8".3 x Round: 5 mm, 6 mm, 8 mm.3 x Rectangular: 3/32", 1/8", 5/32".

Chimney (Lug) NutsZinc & Black.

AB167 60 Pieces1 x Zinc: M5.2 x Zinc: M6.1 x Black: M6.

Threaded InsertsStandard type.

AB78 200 Pieces4 x Sizes: M4, M5, M6, M8.

Page 10: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

12

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Sealing Washers + O-Rings

O-Rings Service Kit - MetricBS 4518.

AB100 404 Pieces30 x Sizes (Peg Ref): 3 x 2 (006), 4 x 2 (007), 5 x 2 (008), 6 x 2 (009), 7 x 2 (010), 8 x 2 (011), 10 x 2 (012), 10 x 2.5 (110), 11 x 2.5 (111), 12 x 2.5 (112) , 14 x 2.5 (113), 16 x 2.5 (114), 17 x 2.5 (115), 19 x 2.5 (116), 19 x 3 (210), 20 x 3 (211), 22 x 3 (212), 24 x 3 (213), 25 x 3 (214), 27 x 3 (215), 28 x 3 (216), 30 x 3 (217), 32 x 3 (218), 33 x 3 (219), 35 x 3 (220), 36 x 3 (221), 38 x 3 (222), 38 x 4 (325), 42 x 4 (326), 45 x 4 mm (327).

O-Rings Service Kit - ImperialBS 1806.

AB101 382 Pieces30 x Sizes (ARP/BS): 2.90 x 1.78 (006), 3.68 x 1.78 (007), 4.48 x 1.78 (008), 5.28 x 1.78 (009), 6.07 x 1.78 (010), 7.66 x 1.78 (011), 9.25 x 1.78 (012), 9.19 x 2.62 (110), 10.78 x 2.62 (111), 12.37 x 2.62 (112), 13.95 x 2.62 (113), 15.54 x 2.62 (114), 17.13 x 2.62, (115), 18.72 x 2.62 (116), 18.64 x 3.53 (210), 20.22 x 3.53 (211), 21.82 x 3.53 (212), 23.40 x 3.53 (213), 24.99 x 3.53 (214), 26.58 x 3.53 (215), 28.17 x 3.53 (216), 29.75 x 3.53 (217), 31.34 x 3.53 (218), 32.92 x 3.53 (219), 34.52 x 3.53 (220), 36.10 x 3.53 (221), 37.69 x 3.53 (222), 37.47 x 5.33 (325), 40.65 x 5.33 (326), 43.82 x 5.33 (327).

O-Rings Splicing KitAB126 14 Piece Kit5 x Imperial Nitrile Rubber Cord, 1 m Lengths: 1/16", 3/32", 1/8", 3/16", 1/4".6 x Metric Nitrile Rubber Cord, 1 m Lengths: 1.6, 2, 3, 4, 5, 5.7 mm.1 x Trimming Knife.1 x Cutting Block.1 x Super Glue: 3g.

Copper Sealing Washers - MetricDIN 7603A.

AB106 250 Pieces16 x Sizes: M5 x 9 x 1.0, M6 x 10 x 1.0, M6 x12 x 1.0, M8 x 12 x 1.0, M8 x 14 x 1.0, M10 x 14 x 1.0, M10 x 16 x 1.0, M12 x 16 x 1.5, M12 x 18 x 1.5, M14 x 18 x 1.5, M14 x 20 x 1.5, M16 x 20 x 1.5, M16 x 22 x 1.5, M18 x 22 x 1.5, M18 x 24 x 1.5, M20 x 26 x 1.5 mm.

Copper Sealing Washers - MetricDIN 7603A.

AB505 1,050 Pieces16 Sizes: M5 x 9 x 1.0, M6 x 10 x 1.0, M6 x12 x 1.0, M8 x 12 x 1.0, M8 x14 x 1.0, M10 x 14 x 1.0, M10 x16 x 1.0, M12 x 16 x 1.5, M12 x18 x 1.5, M14 x 18 x 1.5, M14 x 20 x 1.5, M16 x 20 x 1.5, M16 x 22 x 1.5, M18 x 22 x 1.5, M18 x 24 x 1.5, M20 x 26 x 1.5 mm.

Copper Sealing Washers - Imperial/BSPAB23 225 Pieces15 x Sizes: 1/4" (.265 x .375 x 20g), 1/4" (.265 x .437 x 20g), 1/4" (.265 x .500 x 20g), 5/16" (.323 x .437 x 20g), 5/16" (.323 x .500 x 20g), 1/8 BSP (3/8") (.390 x .590 x 20g), 1/8 BSP (3/8") (.390 x .590 x 18g), 1/4 BSP (.530 x .720 x 20g), 1/4 BSP (.530 x .750 x 18g), 3/8 BSP (21/32") (.665 x .875 x 18g), 1/2 BSP (13/16") (.830 x 1.00 x 18g), 1/2 BSP (13/16") (.830 x 1.04 x 18g), 5/8 BSP (29/32") (.910 x 1.13 x 16g), 3/4 BSP (1.05 x 1.32 x 16g), 7/8 BSP (1.20 x 1.50 x 16g), 1 BSP (15/16") (1.32 x 1.62 x 16g).

Aluminium Washers - MetricDIN 7603A.

AB149 260 Pieces11 x Sizes: M6 x 10, M8 x 11, M10 x 13, M10 x 14, M12 x 16, M12 x 18, M14 x 18, M14 x 20, M16 x 20, M17 x 21, M22 x 27.

O-Rings - MetricBS 4518.

AB81 325 Pieces4 x Dia. Section, 16 mm: 0041-16, 0061-16, 0101-16, 0121-16.4 x Dia. Section, 24 mm: 0076-24, 0096-24, 0116-24, 0126-24.2 x Dia. Section, 30 mm: 0195-30, 0245-30.

O-Rings - ImperialBS 1806.

AB61 325 Pieces10 x ARP/BS: 008, 010, 011, 012, 013, 014, 016, 116, 118, 120.

Fibre Washers - MetricDIN 7603A.

AB143 600 Pieces8 x Sizes: M5 x 9 x 1.0, M6 x 10 x 1.0, M8 x 12 x 1.0, M10 x 14 x 1.0, M12 x 18 x 1.5, M14 x 20 x 1.5, M16 x 22 x 1.5, M18 x 24 x 1.5.

Fibre Washers - ImperialWS 010.

AB25 610 Pieces8 x Sizes: 13/64" x 3/8", 1/4" x 3/8", 5/16" x 5/8", 3/8" x 5/8", 29/64" x 11/16", 1/2" x 11/16", 5/8" x 7/8", 49/64" x 1".

Flat Washers

are on Page 7

Page 11: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

13

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Pins + Springs

Split Pins - Imperial & MetricZinc. DIN 94 / BS 1574 (Imperial). DIN 94 / ISO 1234 (BS 7774) (Metric).

AB206 370 Pieces4 x Imperial Sizes, O.D. x Length: 1/32" x 3/8" (1.0 x 10 mm), 5/64" x 1" (2.0 x 25 mm), 9/64" x 1 1/2" (3.6 x 38 mm), 3/16" x 2" (4.8 x 51 mm).6 x Metric Sizes, O.D. x Length: 2.0 x 14 mm (5/64" x 9/16"), 2.0 x 20 mm (5/64" x 3/4"), 2.5 x 28 mm (3/32" x 1 3/32"), 3.2 x 20 mm (1/8" x 3/4"), 3.2 x 32 mm (1/8" x 1 1/4"), 4.0 x 36 mm (5/32" x 1 3/8").

Split Pins - Imperial (Small Sizes)Zinc. DIN 94 / BS 1574.

AB32 1,000 Pieces8 x Sizes, O.D. x Length: 1/16" x 1" (1.6 x 25 mm), 5/64" x 1" (2.0 x 25 mm), 3/32" x 1" (2.4 x 25 mm), 3/32" x 1 1/2" (2.4 x 38 mm), 7/64" x 1 1/2" (2.8 x 38 mm), 1/8" x 1 1/2" (3.2 x 40 mm), 9/64" x 1 1/2" (3.6 x 40 mm), 5/32" x 1 5/8" (4.0 x 40 mm).

Split Pins - ImperialZinc. DIN 94 / BS 1574.

AB508 850 Pieces12 x Sizes, O.D. x Length: 1/16" x 1" (1.6 x 5 mm), 5/64" x 1" (2.0 x 25 mm), 3/32" x 1" (2.5 x 25 mm), 3/32" x 1 1/2" (2.4 x 38 mm), 7/64" x 1 1/2" (2.8 x 38 mm), 1/8" x 1 1/2" (3.2 x 38 mm), 9/64" x 1 1/2" (3.6 x 38 mm), 5/32" x 1 5/8" (4.0 x 41 mm), 5/32" x 2" (4.0 x 51 mm), 3/16" x 2" (4.8 x 51 mm), 1/4" x 3" (6.3 x 76 mm), 5/16" x 3" (7.9 x 76 mm).

Split Pins - Imperial (Large Sizes)Zinc. DIN 94 / BS 1574.

AB73 225 Pieces5 x Sizes, O.D. x Length: 1/8" x 1 1/2" (3.2 x 38 mm), 5/32" x 2" (4.0 x 51 mm), 3/16" x 2" (4.8 x 51 mm), 1/4" x 3" (6.3 x 76 mm), 5/16" x 3" (7.9 x 76 mm).

Bonded Seals (Dowty Washers) - MetricAB107 90 Pieces8 x Sizes: M10, M12, M14, M16, M18, M20, M22, M24.

Bonded Seals (Dowty Washers) - BSPAB67 90 Pieces7 x Sizes: 1/8 BSP, 1/4 BSP, 3/8 BSP, 1/2 BSP, 5/8 BSP, 3/4 BSP, 1 BSP.

Woodruff Keys & Key SteelAB216 24 Pieces3 x Woodruff Keys: 4 x 6.5 x 16 mm, 4 x 9 x 22 mm, 6 x 9 x 22 mm.4 x Key Steel, Parallel: 8 x 7 x 25 mm, 8 x 7 x 32 mm, 8 x 7 x 36 mm, 12 x 8 x 50 mm.

Woodruff Keys - ImperialAB47 130 Pieces15 x Sizes: 1/16" x 1/2", 3/32" x 1/2", 1/8" x 1/2", 1/8" x 5/8", 5/32" x 5/8", 5/32" x 3/4", 3/16" x 3/4", 3/16" x 7/8", 3/16" x 11/8", 7/32" x 7/8", 7/32" x 11/8", 1/4" x 1", 1/4" x 1 1/8", 5/16" x 1 1/4", 3/8" x 1 1/4".

Dowel Pins - MetricAB113 185 Pieces12 Sizes, O.D. x Length: M3 x 25, M3 x 40, M4 x 25, M4 x 40, M5 x 25, M5 x 40, M6 x 25, M6 x 40, M8 x 25, M8 x 40, M10 x 25, M10 x 40.

Dowel Pins - ImperialBS 1804.

AB34 185 Pieces12 x Sizes, O.D. x Length: 1/8" x 1", 1/8" x 1 1/2", 5/32" x 1", 5/32" x 1 1/2", 3/16" x 1", 3/16" x 1 1/2", 1/4" x 1", 1/4" x 1 1/2", 5/16" x 1", 5/16" x 1 1/2", 3/8" x 1", 3/8" x 1 1/2".

Expansion SpringsAB72 70 Pieces7 x Sizes (Free Length x O.D.): 29.5 x 6.4 mm, 31.5 x 5.0 mm, 33.3 x 6.8 mm, 56.5 x 7.8 mm, 74 x 10.3 mm, 90 x 11.4 mm, 126 x 9.4 mm.

Compression SpringsAB89 70 Pieces10 x Sizes (Free Length x O.D.): 21.2 x 8.9 mm, 22.5 x 9.0 mm, 25 x 12.2 mm, 26.5 x 5.4 mm, 31.5 x 10.4 mm, 37 x 7.8 mm, 65.5 x 13 mm, 66 x 10.4 mm, 100 x 18.5 mm, 124 x 16.0 mm.

Page 12: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

14

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Circlips + Retainers

Circlips Internal & External - MetricDIN 472 (Internal), DIN 471 (External).

AB37 280 Pieces10 x Internal Sizes: 11, 13, 16, 19, 21, 22, 25, 30, 35, 38 mm.10 x External Sizes: 11, 13, 16, 19, 21, 22, 25, 30, 35, 38 mm.

Circlips Internal & External - MetricDIN 472 (Internal), DIN 471 (External).

AB561 340 Pieces3 x Internal: 40, 42, 47 mm.15 x External: 7, 8, 10, 12, 14, 15, 17, 18, 20, 24, 25, 30, 35, 40, 50 mm.

Circlips Internal & External - ImperialBS 3673 (DIN 472 (Internal), DIN 471 (External)).

AB169 275 Pieces5 x Internal: 7/8", 57/64", 1", 1 1/4", 1 3/8".6 x External: 5/8", 3/4", 25/32", 63/64", 1 3/16", 1 5/16".

R-ClipsAB88 75 Pieces5 x Sizes (Wire Ø x Length): 2.5 x 45, 3 x 54, 4 x 75, 5 x 107, 6 x 117 mm.

Clevis PinsBS 1574.

AB33 200 Pieces8 x Sizes: 3/16" x 5/8", 3/16" x 7/8", 1/4" x 1/2", 1/4" x 1 1/16", 9/32" x 7/8", 5/16" x 1", 3/8" x 1 1/4", M6 x 20 (1/4" x 7/8").

Spring Roll Pins - MetricBlack. DIN 1481.

AB80 300 Pieces12 x Sizes, O.D. x Length: 2.5 x 24 mm, 2.5 x 36 mm, 3 x 24 mm, 3 x 40 mm, 4 x 24 mm, 4 x 40 mm, 5 x 24 mm, 5 x 40 mm, 6 x 24 mm, 6 x 40 mm, 8 x 24 mm, 8 x 55 mm.

Spring Roll Pins - MetricBlack. DIN 1481.

AB555 340 Pieces19 x Sizes, O.D. x Length: 3 x 20 mm, 3 x 24 mm, 3 x 30 mm, 4 x 24 mm, 4 x 28 mm, 4 x 40 mm, 4 x 50 mm, 5 x 16 mm, 5 x 20 mm, 5 x 24 mm, 5 x 28 mm, 5 x 32 mm, 5 x 35 mm, 5 x 40 mm, 5 x 45 mm, 6 x 30 mm, 6 x 45 mm, 8 x 32 mm, 8 x 45 mm.

Spring Roll Pins - ImperialBlack.

AB35 300 Pieces11 x Sizes, O.D. x Length: 3/32" x 1", 1/8" x 1", 1/8" x 1 1/2", 5/32" x 1", 5/32" x 1 1/2", 3/16" x 1", 3/16" x 1 1/2", 1/4" x 1", 1/4" x 1 1/2", 5/16" x 1", 5/16" x 2".

Circlips External - MetricDIN 471.

AB174 350 Pieces16 x External Sizes: 7, 8, 10, 12, 14, 15, 17, 18, 20, 22, 24, 25, 30, 35, 40, 50 mm.

Circlips Internal - MetricDIN 472.

AB173 230 Pieces13 x Sizes: 11, 13, 16, 19, 21, 22, 25, 30, 35, 38, 40, 42, 47 mm.

E-Retainers - MetricDIN 6799.

AB127 800 Pieces8 x Sizes (Shaft Ø): 1.7, 2.75, 3.5, 4.5, 6.0, 7.0, 13.0, 15.5 mm.

E-Retainers - ImperialDIN 6799 (BS 3673/2).

AB55 800 Pieces10 x Sizes (Shaft Ø): 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8".

Page 13: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

15

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Automotive

Brake NutsFor 3/16" pipe.

AB45 200 Pieces3 x Brake Nuts, Short Males: 3/8" UNF x 24 TPI, 10 x 1.00 mm, 10 x 1.25 mm.4 x Brake Nuts, Long Males: 3/8" UNF x 24 TPI, 3/8" BSF x 20 TPI, 10 x 1.00 mm, 10 x 1.25 mm.2 x Brake Nuts, Fully Threaded Males: 10 x 1.00 mm, 10 x 1.25 mm.1 x Part Threaded Males: 12 x 1.00 mm.1 x Long Females: 3/8" UNF x 24 TPI.1 x Short Females: 10 x 1.00 mm.

Brake Tubing Connectors & Brake Bleed Screws - UNF & MetricFor 3/16" pipe

AB85 61 Pieces1 x Male Connectors: 10 x 1.00 mm.1 x Female Connectors: 3/8" UNF x 24 TPI, 10 x 1.00 mm.2 x 3-way Connectors: 3/8" UNF x 24 TPI, 10 x 1.00 mm.5 x Brake Bleed Screws: 1/4" UNF x 28 TPI, 3/8" UNF x 24 TPI, M6 x 1.00 x 29 mm, M6 x 1.00 x 38 mm, M7 x 1.00 mm, M8 x 1.25 mm, M10 x 1.00 mm.

Brake Shoe Hold-Down KitAB145 200 Pieces3 x Pins, Suits: FORD, GM, ROVER.2 x Washers: LOCKHEED, GIRLING.4 x Springs, Suits: FORD, VAUXHALL/GM, LOCKHEED, BL.

Sump Plug WashersAB117 220 Pieces12 x Types, Suits: CITRÖEN, PEUGEOT, RENAULT, VAUXHALL/OPEL, VW, FORD (OHC), ROVER, ROVER/HONDA, METRO Mini, FIAT, MERCEDES, VOLVO, TOYOTA (Small).

Exhaust Manifold Studs & Nuts - MetricAB116 72 Pieces2 x Nuts, Copper Flashed Steel (Size x Pitch): M8 x 1.25 mm, M10 x 1.50 mm.2 x Nuts, Brass (Size x Pitch): M8 x 1.25 mm, M10 x 1.25 mm.8 x Studs (Size x Pitch x Length): M8 x 1.25 mm x 37 mm, M8 x 1.25 mm x 42 mm, M10 x 1.25 x 37 mm, M10 x 1.50 mm x 38 mm, M10 x 1.50 mm x 52 mm, M10 x 1.50 mm x 55 mm.

Exhaust Manifold Studs & Nuts - Metric & ImperialAB26 81 Pieces2 x Nuts, Copper Flashed Steel, Metric (Size x Pitch): M10 x 1.50 mm.2 x Nuts, Brass, Metric (Size x Pitch): M8 x 1.25 mm, M10 x 1.25 mm.4 x Nuts, Brass, Imperial: 5/16" UNF, 3/8" UNF, 5/16" UNC, 3/8" UNC.3 x Studs, Metric (Size x Pitch x Length): M8 x 1.25 mm x 37 mm, M10 x 1.25 x 37 mm, M10 x 1.50 mm x 52 mm.5 x Studs, Imperial: 5/16" UNC/UNF, 5/16" UNF/UNF, 5/16" UNC/UNC, 3/8" UNF/UNF, 3/8" UNC/UNC.

.

Accelerator & Clutch SpringsAB29 40 Pieces8 x Sizes (Free Length x O.D.): 53 x 12.4 mm, 61.2 x 15.4 mm, 63.4 x 13 mm, 66 x 13.1 mm, 77.4 x 23.15 mm, 82.5 x 12.95 mm, 84.2 x 10.9 mm, 86 x 13.3 mm.

Air Conditioning O-Rings KitHighly saturated nitrile O-rings. 12 sizes for use with Freon R134a.Supplied in a hinged plastic case.

HAC200 200 Piece Kit12 x Sizes: 3/16" x 5/16" x 1/16", 1/4" x 3/8" x 1/16", 5/16" x 7/16" x 1/16", 3/8" x 1/2" x 1/16", 7/16" x 9/16" x 1/16", 7/16" x 5/8" x 3/32", 1/2" x 5/8" x 1/16", 9/16" x 11/16" x 1/16", 11/16" x 13/16" x 1/16", 3/4" x 15/16" x 3/32", 13/16" x 1 1/16" x 1/8", 7/8" x 1 1/16" x 3/32", . 176" x .070", .239" x .070", .301" x .070", .364" x .070", . 426" x .070", .424" x .103", .489" x .070", .551" x .070", . 676" x .070", .737" x .103", .796" x .139", .862" x .103".

Core Plugs Cup Type - MetricMild steel.

AB120 60 Pieces10 x Sizes: 18, 22, 24, 26, 28, 30, 32, 34, 36, 48 mm.

Puncture Repair KitAB148 1 KitTube Patches: No.’s 2 & 3. Vulcanising Fluid: 30g. Universal Markers.

Diesel Injector WashersCopper. DIN 7603A.

AB142 250 Pieces16 x Sizes: M6 x 10 x 1.0 (BOSCH 2916 710 602), M8 x 11.5 x 1.0 (LUCAS NW5-17W4, BOSCH 2916 710 646), M10 x 13.5 x 1.0 (BOSCH 2916 710 605), M10 x 14 x 1.0 (BOSCH 2916 710 649), M10 x 20 x 1.0 (MAN/PERKINS P:2411126), M10 x 20 x 2.0 (LUCAS 5339401, PERKINS P:0920113), M12 x 16 x 1.5 (BOSCH 2916 710 607), M12 x 18 x 1.5 (BOSCH 2916 710 608), M14 x 18 x 1.5 (BOSCH 2916 710 609), M14 x 20 x 1.5 (BOSCH 2916 710 610), M16 x 20 x 1.5 (BOSCH 2916 710 611), M17 x 21 x 1.5 (BOSCH 2916 710 611, GM 14025557), M21 x 25 x 1.0 (LUCAS NW5/59), M22 x 27 x 1.0 (LUCAS NW5/60).

Core Plugs Cup Type - ImperialMild steel.

AB30 60 Pieces8 x Sizes: 7/8", 1 1/4", 1 1/2", 1 5/8", 1 3/4", 1 7/8" (48 mm), 1 15/16", 2".

Page 14: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

16

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Tube Couplings + O-Clips

JG 'Speedfit' Push-Fit Tube Couplings - Straights, MetricPlastic. Black.

AB97 24 Pieces6 x Sizes: 4, 5, 6, 8, 10, 12 mm.

JG 'Speedfit' Push-Fit Tube Couplings - Elbows & Tees, MetricPlastic. Black.

AB99 17 Pieces4 x Tees: 6, 8, 10, 12 mm.4 x Elbows: 6, 8, 10, 12 mm.

JG 'Speedfit' Push-Fit Tube Couplings - Straights, ImperialPlastic. Grey.

AB96 24 Pieces6 x Sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 1/2".

Adhesive Dressings (Plasters) - Stretch Fabric & WashproofSterile/Individually wrapped.• Hypoallergenic Adhesive - Latex FREE

(Washproof).• Zinc Oxide Adhesive - Excellent

Adhesive Properties (Stretch Fabric).

AB36 200 Pieces3 x Sizes: 4.0 x 4.0 cm, 6.0 x 2.0 cm, 7.5 x 5.0 cm.

Tube Couplings Brass - MetricAB95 28 Pieces6 x Sizes: 4, 5, 6, 8, 10, 12 mm.

Tube Couplings Brass - ImperialAB65 28 Pieces7 x Sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2".

Olives Stepped - MetricAB111 210 Pieces6 x Sizes: 4, 5, 6, 8, 10, 12 mm.

Olives Stepped & Barrel - ImperialAB64 500 Pieces7 x Stepped: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2".7 x Barrel: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2".

O-Clips - Single Ear with Insert RingDIN 10338 ST4 & 1.4310.

AB144 160 Pieces8 x Size Ranges: 7.0 - 8.5 mm, 8.5 - 10.0 mm, 9.8 - 11.8 mm, 11.8 - 3.8 mm, 13.2 - 15.8 mm, 15.6 - 17.8 mm, 17.1 - 20.0 mm, 20.2 - 22.8 mm.

O-Clips - 2-EarDIN 1.0338 ST4.

AB38 140 Pieces6 x Sizes (Dia. Range): 3/8" (8 - 11 mm), 7/16" (9 - 11 mm), 1/2" (11 - 13 mm), 9/16" (13 - 15 mm), 5/8" (15 - 18 mm), 3/4" (17 - 20 mm).

Pipe Repair KitAB74 72 Pieces6 x O-Clips: 7/16", 1/2", 9/16", 5/8", 3/4", 7/8".6 x Pipe Joiners (Hose I.D.): 3/16", 1/4", 5/16", 3/8", 1/2", 5/8".

Adhesive Dressings (Plasters) - Blue Detectable WashproofDressings for the Food & Catering Industry.Sterile/Individually wrapped. Complies with Food & Hygiene regulations (SI 1990 No 1431).• Hypoallergenic Adhesive - Latex FREE.• Metal Detectable.

AB121 150 Pieces3 x Sizes: 4.0 x 4.0 cm, 6.0 x 2.0 cm, 7.5 x 5.0 cm.

Page 15: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

17

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Grease Nipples + Electrical

Mini Hose ClipsAB102 100 Pieces10 x Sizes (Dia. Range): 7 - 9, 8 - 10, 9 - 11, 10 - 12, 11 - 13, 12 - 14, 13 - 15, 14 - 16, 15 - 17, 16 - 18 mm.

RING AUTOMOTIVE 12v Panel Bulb Kit12v standard. Supplied in a mini flip-top box.

ERPB121 71 Pieces18 x 12V Standard Panel Bulbs: 509TMOR, 509TMBK, 509TMBE, 509TMGR, 509TMBL, 509TMOR, 509T, 509TGR, 509TBBK, 509TBWH, 509TWGR, 509TWGY, 509TDBK, 509TEBK, 509TMGY, 286, 286A, 286B, 286G, 286R, 501A.

RING AUTOMOTIVE12v Special Panel Bulb Kit12v special. Supplied in a mini flip-top box.

ERPB122 69 Pieces18 x 12v Special Bulbs: 509TMGY, 509TVI, 509TBL, 509TBE, 86021001, 509TLBK, 509TKBK, 509TWBR, 64124, 64122, 509TCTR, 509TCGY, 509TCGY/1.8, 509TCGYFR, 509TCWH, 509TCWH, 509TFBK/12, 509TFBK/14, 509TFGY, 512TR, 512PC, 509TQWH, 512WB, 509TSBK, 88005996, 509TJBR.

RING AUTOMOTIVE 24v Panel Bulb Kit24v standard. Supplied in a mini flip-top box.

ERPB243 70 Pieces18 x 24v Bulbs: 508TMRE, 5508TMGR, 508TBR, 508T, 508TBGY, 1471, 1791, 6929, 508TWBR, 508TCWH, 508TCTR, 508A, 508B, 508G, 508R, 508TUWH, 508TVWH, 86021003, 86028166, 8328, 86024918.

UMETA Grease Nipples - Metric & ImperialAB207 80 Pieces3 x Straights (Size x Pitch): M6 x 1.00 mm, M8 x 1.00 mm, M8 x 1.25 mm.3 x Straights: 1/4" UNF, 1/4 BSP, 1/8 BSP Gas.1 x Angled 90°: 1/4" UNF.1 x Long Straights: 1/4" UNF.

UMETAGrease Nipples - Metric & ImperialAB46 130 Pieces3 x Straights (Size x Pitch): M6 x 1.00 mm, M8 x 1.00 mm, M10 x 1.00 mm.3 x Straights: 1/4" UNF, 1/4 BSP, 1/8 BSP Gas.3 x Angled 45° (Size x Pitch): M6 x 1.00 mm, M8 x 1.00 mm, M10 x 1.00 mm.3 x Angled 45°: 1/4" UNF, 1/4 BSP, 1/8 BSP Gas.

UMETAGrease Nipples - MetricAB115 115 Pieces4 x Straights (Size x Pitch): M6 x 1.00 mm, M8 x 1.00 mm, M8 x 1.25 mm, M10 x 1.00 mm.4 x Angled 45° (Size x Pitch): M6 x 1.00 mm, M8 x 1.00 mm, M8 x 1.25 mm, M10 x 1.00 mm.4 x Angled 90° (Size x Pitch): M6 x 1.00 mm, M8 x 1.00 mm, M8 x 1.25 mm, M10 x 1.00 mm.

UMETAGrease Nipples - BSP & UNFAB159 90 Pieces3 x Straights: 1/4" UNF, 1/4 BSP, 1/8 BSP Gas.3 x Angled 45°: 1/4" UNF, 1/4 BSP, 1/8 BSP Gas.3 x Angled 90°: 1/4" UNF, 1/4 BSP, 1/8 BSP Gas.1 x Long Straights: 1/4" UNF.1 x Button Head (Tat Type): 1/8 BSP Gas.

GP BATTERIES Alkaline Batteries & Lithium CellsAB177 24 Pieces5 x Lithium Cells: CR1220, CR1616, CR2016, CR2025, CR2032.3 x Alkaline Batteries: 23A, 27A, LR44.

Blanking & Wiring GrommetsBlack rubber.

AB44 240 Pieces7 x Blanking (for Holes Ø) 8.0, 9.5, 12.5, 15.5, 19.0, 22.5, 25.4 mm.7 x Wiring (for Holes Ø) 6.4, 8.0, 9.5, 11.0, 14.2, 17.5, 19.0 mm.

Copper Tube TerminalsAB114 52 Pieces10 x Sizes (for Cable Diameter x Bolt Hole Size): 10 mm² x 8 mm, 16 mm² x 8 mm, 25 mm² x 6 mm, 25 mm² x 8 mm, 35 mm² x 8 mm, 35 mm² x 10 mm, 50 mm² x 8 mm, 50 mm² x 10 mm, 70 mm² x 10 mm, 70 mm² x 12 mm.

Copper Tube Butt ConnectorsAB123 52 Pieces6 x Sizes (for Cable Diameter): 10, 16 , 25, 35, 50, 70 mm².

Page 16: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

18

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Terminals

Terminals Insulated - RedAB501 600 Pieces3 x Push-on Females: 2.8, 4.8, 6.3 mm.3 x Push-on Females, Fully Insulated: 2.8, 4.8, 6.3 mm.1 x Piggybacks: 6.3 mm.1 x Push-on Males: 6.3 mm.1 x Bullets: Ø 4.0 mm.1 x Receptacle Sockets: Ø 4.0 mm.1 x Butt Connectors: 3.3 mm.1 x Pins (12 mm): Ø 1.9 mm.1 x Blades (18 mm): 2.3 mm.1 x Forks: 3.7 mm (4BA).4 x Rings: Ø 4.3 mm, 5.3 mm (2BA), 6.4 mm (1/4"), 8.4 mm (5/16").

Terminals Insulated - BlueAB502 600 Pieces2 x Push-on Females: 4.8, 6.3 mm.2 x Push-on Females, Fully Insulated: 4.8, 6.3 mm.1 x Piggybacks: 6.3 mm.1 x Push-on Males: 6.3 mm.1 x Bullets: Ø 5.0 mm.1 x Receptacle Sockets: Ø 5.0 mm.1 x Butt Connectors: 4.0 mm O.D.2 x Forks: 3.7 mm (4BA), 5.2 mm (2BA).1 x Blades (18 mm): 2.3 mm.1 x Pins (12 mm): Ø1.9 mm.5 x Rings: Ø 4.3 mm, 5.3 mm (2BA), 6.4 mm (1/4"), 8.4 mm (5/16"), 10.5 mm (3/8").

Terminals InsulatedAB509 600 Pieces4 x Push-on Females: 2.8 mm Red, 6.3 mm Red, 6.3 mm Blue, 9.5 mm Yellow.3 x Push-on Females, Fully Insulated: 6.3 mm Red, 6.3 mm Blue, 6.3 mm Yellow.1 x Piggybacks: 6.3 mm Blue.2 x Push-on Males: 6.3 mm Red, 6.3 mm Blue.2 x Bullets: Ø 4.0 mm Red, 5.0 mm Blue.2 x Receptacle Sockets: Ø 4.0 mm Red, 5.0 mm Blue.3 x Butt Connectors: 3.3 mm Red, 4.0 mm Blue, 5.5 mm O.D. Yellow.7 x Rings: Ø 5.3 mm (2BA) Red, 5.3 mm (2BA) Blue, 6.4 mm (1/4") Blue, 6.4 mm (1/4") Yellow, 8.4 mm (5/16") Blue, 8.4 mm (5/16") Yellow, 10.5 mm (3/8") Yellow.

Terminals Insulated - RedAB160 260 Pieces3 x Push-on Females: 2.8, 4.8, 6.3 mm.1 x Push-on Females, Fully Insulated: 6.3 mm.1 x Piggybacks: 6.3 mm.1 x Push-on Males: 6.3 mm.1 x Bullets: Ø 4.0 mm.1 x Receptacle Sockets: Ø 4.0 mm.1 x Butt Connectors: 3.3 mm O.D.4 x Rings: Ø 4.3 mm, 5.3 mm (2BA), 6.4 mm (1/4"), 8.4 mm (5/16").

Terminals Insulated - BlueAB161 280 Pieces2 x Push-on Females: 4.8, 6.3 mm.1 x Push-on Females, Fully Insulated: 4.8 mm.1 x Piggybacks: 6.3 mm.1 x Push-on Males: 6.3 mm.1 x Bullets: Ø 5.0 mm.1 x Receptacle Sockets: Ø 5.0 mm.1 x Butt Connectors: 4.0 mm O.D.6 x Rings: 4.3 mm, 5.3 mm (2BA), 6.4 mm (1/4"), 8.4 mm (5/16"), 10.5 mm (3/8"), 13.0 mm (1/2").

Terminals Insulated - Red & BlueAB110 200 Pieces5 x Push-on Females: 2.8 mm Red, 4.8 mm Red, 4.8 mm Blue, 6.3 mm Red, 6.3 mm Blue.1 x Push-on Females, Fully Insulated: 6.3 mm Blue.2 x Push-on Males: 6.3 mm Red, 6.3 mm Blue.2 x Bullets: Ø 4.0 mm Red, 5.0 mm Blue.2 x Receptacle Sockets: Ø 4.0 mm Red, 5.0 mm Blue.2 x Butt Connectors: 3.3 mm O.D. Red, 4.0 mm O.D. Blue.

Terminals Insulated - YellowAB162 110 Pieces2 x Push-on Females: 6.3, 9.5 mm.2 x Push-on Females, Fully Insulated: 6.3, 9.5 mm.1 x Push-on Males: 6.3 mm.1 x Butt Connectors: 5.5 mm O.D.5 x Rings: Ø 5.3 mm (2BA), 6.4 mm (1/4"), 8.4 mm (5/16"), 10.5 mm (3/8"), 13.0 mm (1/2").

Terminals InsulatedAB42 340 Pieces5 x Push-on Females: 2.8 mm Red, 4.8 mm Blue, 6.3 mm Red, 6.3 mm Blue, 9.5 mm Yellow.1 x Piggybacks: 6.3 mm Blue.2 x Push-on Males: 6.3 mm Red, 6.3 mm Blue.1 x Bullets: Ø 5.0 mm Blue.1 x Receptacle Sockets: Ø 5.0 mm Blue.1 x Butt Connectors: 4.0 mm O.D. Blue.4 x Rings: Ø 4.3 mm Red, 5.3 mm (2BA) Blue, 6.4 mm (1/4") Blue, 8.4 mm (5/16") Blue.2 x Bullet Connectors: Single, Double.

Terminals Insulated - Red & Blue with Crimping PliersAB43 206 Pieces2 x Push-on Females: 6.3 mm Red, 6.3 mm Blue.1 x Piggybacks: 6.3 mm Blue.2 x Push-on Males: 6.3 mm Red, 6.3 mm Blue.2 x Bullets: Ø 4.0 mm Red, 5.0 mm Blue.2 x Receptacle Sockets: Ø 4.0 mm Red, 5.0 mm Blue.2 x Butt Connectors: 3.3 mm O.D. Red, 4.0 mm O.D. Blue.3 x Rings: Ø 5.3 mm (2BA) Red, 5.3 mm (2BA) Blue, 6.4 mm (1/4") Blue.1 x Crimping Pliers.

Red Heat Shrink Terminals, Adhesive Lined - Red & BlueAB125 130 Pieces2 x Push-on Females: 6.3 mm Red, 6.3 mm Blue.2 x Push-on Males: 6.3 mm Red, 6.3 mm Blue.2 x Butt Connectors: Ø 3.7 mm Red, 5.0 mm Blue.4 x Rings, Standard Length: Ø 5.3 mm (2BA) Red, 6.4 mm (1/4") Red, 6.4 mm (1/4") Blue, 8.4 mm (5/16") Blue.

Terminals - Non-InsulatedAB147 160 Pieces16 x Types: Bullets Male, Bullets Female, Push-on Males, Push-on Females (Suits VW, AUDI, VOLVO, SAAB, FORD, BMW, GM).

Page 17: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

19

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + Security

IndexA

ssortedBoxes

Fuses

Glass FusesAB39 200 Pieces8 x Amperages: 2, 5, 10, 15, 20, 25, 35, 50 A.

PAL Auto FusesFor FORD applications.

AB124 20 Pieces3 x Type 293: 20, 40, 60 A.3 x Type 294: 50, 60, 80 A.

LITTELFUSEMINI® Blade FusesAB118 100 Pieces10 x Amperages: 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30 A.

LITTELFUSELow Profile MINI® Blade FusesAB175 70 Pieces7 x Amperages: 5, 7.5, 10, 15, 20, 25, 30 A.

Heat Shrink Tubing - 50 mm LengthsPolyolefin. Shrink Ratio: 2:1.

AB103 172 Pieces4 x Sizes: 3.2, 4.8, 6.4, 12.7 mm.4 x Colours: Black, Blue, Red, Yellow.

Torpedo FusesAB40 400 Pieces4 x Amperages: 5, 8, 16, 25 A.

LITTELFUSE ATO® Blade Fuses with Fuse HoldersStandard type blade fuse.

AB41 105 Pieces9 x ATO® Blade Fuses: 3, 4, 5, 7.5, 10, 15, 20, 25, 30 A.1 x Standard Fuse Holders.

LITTELFUSEMAXI™ Blade FusesAB176 29 Pieces7 x Amperages: 20, 30, 40, 50, 60, 70, 80 A.

Blade Fuses with Fuse HoldersAB164 105 Pieces9 x Blade Fuses, Amperages: 3, 4, 5, 7.5, 10, 15, 20, 25, 30 A.1 x Holders.

Mini-Fuse Blade FusesAB165 100 Pieces10 x Amperages: 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30 A.

80 YEARS OF EXPERTISEFor eight decades, Littelfuse have been developing industry-leading circuit protection products: 1976 - Introduction of the first blade-type ATO (Autofuse®) Fast-Acting Fuse, which is now considered the global standard in automotive fusing.1986 - Development of the smaller design, MINI® Fuse to replace ATO® Fuse allowing OEMs to add additional fuses to protect on-board electronic accessories. MAXI™ fuse developed to replace commonly used fusible wire and links for under the bonnet electrical harnesses.1997 - Introduction of the JCASE™ Fuse, designed as compact alternative to MAXI™ Fuse.

LITTELFUSEBlade Fuses & HoldersAB503 321 Pieces11 x Standard ATO® Blade Fuses: 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30, 40 A.10 x MINI® Blade Fuses: 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30 A.1 x Standard Fuse Holders: 20 A.1 x Splash Proof MINI® Fuse Holders: 20 A.

Page 18: Contentsthepartscentre.co.uk/media/downloads_new/consumableParts/01... · Set Screws High Tensile - Metric Zinc. DIN 933 Grade 8.8. AB564 290 Pieces 2 x M4: x 10, 20 mm. ... ANSI

20

ElectricalA

ssembly

ElectricalA

ssembly

Light +Pow

erThreaded Fasteners

Fixings + H

ardware

Tubing +A

ir LineTyre Shop +Autom

otiveGrease +Chem

icalsSealants +Adhesives

Hygiene +

SafetyW

elding +A

brasivesCutting + Drilling

GeneralH

and ToolsSpecialistAuto Tools

Storage + SecurityStorage + Security

Storage + SecurityIndex

Assorted

Boxes

Empty Boxes + Storage Systems

AB 'Max Box'Large size transparent polypropylene compartment box. Dimensions (W x H x D): 333 x 58 x 228 mm (13 1/8" x 2 5/16" x 9").• High strength, oil-resistant

transparent polypropylene.• Reinforced hinges and two snap latches

give secure closure and prevent parts moving between compartments.

• Can be stacked or stored in Carrying Case (Part No. SB101).

Part No. Type

SB100 Adjustable c/w 20 Dividers

Part No. Type

SB106 6-Compartment

AB 'Max Box' Carrying CaseMade from cold rolled steel, finished in grey baked enamel.• Holds up to 5 boxes.• Keyhole slots enable case to be wall-mounted.• Bolt holes enable cases to be stacked.

SB101 Carrying Case

AB 'Flip Box'Standard size transparent polypropylene compartment box. Dimensions (W x H x D): 212 x 43 x 138 mm (8 3/8" x 1 3/4" x 5 3/8").• Hinged lid which overlaps on all

sides of the box tray.• 2 x Snap latches for secure closing.• 8 x Removable dividers provide up to 10

compartments in various configurations.• Boxes can stacked or stored in a

Storage Rack (Part No. ABR).

Part No. Description Qty

ABM AB 'Flip Box' 1ABM50 AB 'Flip Box' 50

Storage Rack for AB 'Flip Box'PVC coated wire.Dimensions (H x W x D): 460 x 300 x 210 mm.• Holds up to 10 boxes for fast and easy retrieval.• Can be free-standing or wall mounted.

ABR Storage Rack

Part No. Type

SB112 12-Compartment

Part No. Type

SB116 16-Compartment

Part No. Type

SB118 18-Compartment

Part No. Type

SB124 24-Compartment

Carrying Case Locking HingeHolds boxes in place whilst being transported.Can be locked with a padlock (NOT included).

SB102 Locking Hinge