cmz machinery group, s.a. - bergslimetallmaskiner.no · cmz machinery group, s.a. ... cnc...
TRANSCRIPT
CMZ Machinery Group, S.A.
High perfomance from within
TA 15 TA 20 TA 25 TA 30
TA 15M TA 20M TA 25M TA 30M TA 15S TA 20S TA 25S TA 30S TA 15MS TA 20MS TA 25MS TA 30MS TA 15Y TA 20Y TA 25Y TA 30Y TA 15YS TA 20YS TA 25YS TA 30YS
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
TA 15 /400 TA 15M /400 TA 15Y /400
TA 20 /400 TA 20M /400 TA 20Y /400
TA 25 /400 TA 25M /400 TA 25Y /400
TA 30 /400 TA 30M /400 TA 30Y /400
2 3
MODEL RANGE
GAMA DE MODELOS
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
4 5
MODEL RANGE
TA
15
/640
TA 15M /640
TA 15S /640
TA 15MS /640
TA 15Y /640
TA 15YS /640
TA 20 /640
TA 20M /640
TA 20S /640
TA 20MS /640
TA 20Y /640
TA 20YS /640
TA 25 /640
TA 25M /640
TA 25S /640
TA 25MS /640
TA 25Y /640
TA 25YS /640
TA 30 /640
TA 30M /640
TA 30S /640
TA 30MS /640
TA 30Y /640
TA 30YS /640
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
6 7
MODEL RANGE
TA
15
/1100
TA 15M /1100
TA 15S /1100
TA 15MS /1100
TA 15Y /1100
TA 15YS /1100
TA 20 /1100
TA 20M /1100
TA 20S /1100
TA 20MS /1100
TA 20Y /1100
TA 20YS /1100
TA 25 /1100
TA 25M /1100
TA 25S /1100
TA 25MS /1100
TA 25Y /1100
TA 25YS /1100
TA 30 /1100
TA 30M /1100
TA 30S /1100
TA 30MS /1100
TA 30Y /1100
TA 30YS /1100
Prismatic guide ways.
Acceleration of 1g. Rapid traverse rate of 30 m/min.
Electric cabinet totally sealed (IP55 protection).
Front and rear roller spindle bearings cooled
by oil.
z400 High performance from within
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
Oil cooled turret with 12,000 rpm integrated motor. Hydraulically clamped with curvic coupling. Rigid tapping. Ballscrew mountings are
cooled by oil.
Servo Tailstock
Integral spindle motors with oil cooling.
Hydraulic cylinder operating at 45kg/cm².
A thermal sensor in the bed controls the temperature of
the oil that cools the spindles and ballscrew mounts.
Smart automatic lubrication
system saves money and increases reliability.
Highly rigid cast iron monobloc machine bed.
Laser compensation in all axes including the C axis.
High quality double anchor pre-tensioned ballscrews provide high thermal stability.
Waste lubrication oil piped to a separate tank preventing coolant contamination.
Removable, separate coolant tank, guarding design prevents coolant contact with the machine bed ensuring thermal stability. The coolant tank can be removed without removing the chip conveyor.
8 9
Ballscrew mountings are cooled by oil.
Electric cabinet totally sealed (IP55 protection).
Front and rear roller spindle bearings cooled
by oil.
Integral spindle motors with oil cooling.
Hydraulic cylinder
operating at 45kg/cm²
Smart automatic lubrication
system saves money and increases reliability.
z640 High performance from within
Prismatic guide ways. Acceleration of 1g. Rapid traverse rate of 30 m/min.
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
Oil cooled turret with 12,000 rpm integrated motor. Hydraulically clamped with curvic coupling. Rigid tapping.
Laser compensation in all axes including the C axis.
Integral spindle motors with oil cooling.
Integral spindle motors with oil cooling.
Waste lubrication oil piped to a separate tank preventing coolant contamination.
A thermal sensor in the bed controls the temperature of
the oil that cools the spindles and ballscrew mounts.
High quality double anchor pre-tensioned ballscrews provide high thermal stability.
Highly rigid cast iron monobloc machine bed.
Removable, separate coolant tank, guarding design prevents coolant contact with the machine bed ensuring thermal stability. The coolant tank can be removed without removing the chip conveyor.
10 11
High quality double
anchor pre-tensioned ballscrews provide high
thermal stability.
z1100 High performance from within
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
Oil cooled turret with 12,000 rpm integrated motor. Hydraulically clamped with curvic coupling.
Electric cabinet totally sealed (IP55 protection).
Front and rear roller spindle bearings cooled
by oil.
Rigid tapping.
Laser compensation in all axes including the C axis.
Servo Tailstock
Ballscrew mountings are cooled by oil.
Prismatic guide ways. Acceleration of 1g. Rapid traverse rate of 30 m/min.
Integral spindle motors with oil cooling.
Hydraulic cylinder operating at 45kg/cm²
Smart automatic lubrication system saves money and
increases reliability.
A thermal sensor in the bed controls the temperature of
the oil that cools the spindles and ballscrew mounts.
Removable, separate coolant tank, guarding design prevents coolant contact with the machine bed ensuring thermal stability. The coolant tank can be removed without
removing the chip conveyor.
Highly rigid cast iron monobloc machine bed.
Waste lubrication oil piped to a separate tank preventing coolant contamination.
12 13
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
Integrated Spindles. Higher precision, surface finish and roundness
TA30 Integrated spindle motors increase accuracy and
reduce machining times.
The spindle is driven through a motor integrated in the headstock body itself. This construction ensures an outstanding spindle robustness and vibration dampening that significantly improves surface finish and roundness.
Additionally, spindle acceleration and braking times are shortened by about 20-50% because of the reduced inertia and higher loading capacity of oil-cooled headstocks.
Built-in encoder.
Higher precision on C axis.
Finned design aids cooling.
Double row roller bearings can withstand substantial impacts without damage. They make the spindle more rigid, precise and increase bearing life.
Spindle and bearings cooled by oil.
TA25
No pulleys or belts
- No belt slipping. - Better surface finish.
- Lower noise level.
Hydraulic cylinder at 45 Kg/cm²
TA20
- More compact. - Reduced cross-section means higher speed clamping.
- Better sensitivity for light clamping.
Special coolant collection tray made by CMZ. Excellent access to adjust
the detectors. Easy chip removal. Protection against coolant entering
into the hydraulic circuit.
Hydraulic brake on
C axis.
TA15-SUB SPINDLE
ROUNDNESS SURFACE FINISH
• Machine: TA 15 • Material: Aluminium • Ø 60 mm. • Roundness achieved: 0,3 µm
• Filter: 150 p/r (50%) • Measurement range: 0,10º
• Machine: TC 15 • Material: Aluminium • Ø 60 mm. • Roughness achieved: Rmax 0,6 µm • Filter: 150 p/r (50%)
· The results obtained herein may not be attainable due to environmental and measuring differences.
14 15
Turret with a built-in motor and hydraulic clamping
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
0,5 sec 180°
12Kw
10
POWER AND TORQUE DIAGRAM OF DRIVEN TOOL MOTOR
11,3Kw (Max)
Max= 75Nm / 11,3Kw
S3 25%= 45Nm / 8,1Kw 8,1Kw S1
8
6
4
2
S1= 27,5Nm / 8,1Kw
12.1 rpm
0,2 sec 30°
1000 1700 2800 4750
6000 8000 10000 12000rpm
The robust turret disk does not lift while indexing. The turret is unclamped on retract and clamped on approach, thus ensuring an effective tool changing time of 0.2 s.
- Sturdily-built turret, incorporating a large diameter turret disk which enables the interferences between tools and chuck to be reduced.
- Bi-directional high-speed indexing is driven by a servomotor. The motor used for turret rotation is similar to motors used for axis movement,thus achieving high rotation rigidity and smoothness.
- The indexing time is 0.2 seconds for adjacent turret positions and 0.5 seconds for 180 degrees.
- The turret is unclamped on
Turret cooled
with oil for greater thermal stability.
retract and clamped on approach, thus ensuring an effective tool changing time of 0.2 s.
- The clamping is done by means of a hydraulic system. The locking rings are 220 mm diameter and are a curvic coupling.
- The transmission of driven tools is fitted with Gleason type conical spiral gears, hardened and ground giving high accuracy when rigid tapping.
16 17
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
Automate short and long batches with the GL20 II and GL6 Gantry robots
A RANGE OF GRIPPER 1 HEADS WITH 2 X 10 KG
CAPACITY TO SUIT YOUR NEEDS (GL20 II)
1. 3-jaw servo gripper with 2 x 180° indexing.
2. 2-jaw servo gripper with 2 x 180° indexing.
3. 3-jaw pneumatic gripper with 2 x 90° indexing.
4. Pneumatic gripper for shafts with 2 x 90° indexing.
5. Servo gripper for shafts with 2 x 90° indexing.
2 3 4 5 1 2
Pneumatic roof shutter gives access for the robot. The shutter is located
GRIPPER HEADS WITH 2 X 3 KG CAPACITY
(GL6)
1. 3-jaw gripper to load parts less than 3 kg. 2. 2-jaw gripper to load irregular parts or shafts
up to 3 kg.
VERY EASY TO USE
Increase your productivity by feeding short, medium or large batches with the GL20 II or GL6 Gantry robots with capacity for components up to 10 Kg.
Easy to use and to program. CMZ have developed a conversational programming system that makes it very easy to set and use the GL20 II and GL6 Gantry robots.
A WIDE RANGE OF WORKSTOCKERS WITH LARGE CAPACITY PERMITS LONG PERIODS OF UNMANNED OPERATION:
Workstocker WS-280x400x14 with 14 pallets. Maximum workpiece diameter 280 mm x 400 mm of vertical travel.
This workstocker can accomodate components to a maximum diameter of 280 mm and maximum stacked height of 500 mm (maximum travel of 400mm). The 14 rotary pallets each have a carrying capacity of 75 kg maximum.
Workstocker WS-700 for shafts:
Workstocker to stock shafts from 80 mm to 700mm long and from 10 mm to 80mm diameter. (contact CMZ for other sizes).
CMZ offer a wide
range of products for automation.
Contact us for more information.
very close to the chuck to minimise the robot travel when loading the part.
Checking station.
Z axis speed (longitudinal): 180 m/min Y axis speed (transverse): 120 m/min X axis speed (vertical): 180 m/min
CNC controlled axes. -Rack and pinion drive. -Automatic lubrication controlled by the CNC.
Workstocker with 14 pallets. Pallets accept parts up to Ø280 mm. Stack height - 500 mm. Elevator travel - 400 mm.
18 19
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
REDUCED CYCLE TIME BY ENTERING UP TO
THREE M CODES IN A SINGLE BLOCK.
SOPHISTICATED INTERFACE WITH
200 EASILY UNDERSTANDABLE
ALARMS FOR DIAGNOSIS.
0.0001 mm resolution & 1 g accelerations.
With 1 million pulse encoders, better precision, surface finish and acceleration are achieved.
Nano CNC
The CNC makes internal calculations for the servos in 1/1000 of a micron (in nanometres - 0.000001mm).
Ethernet connection.
Connect the machine to your network using the CNC’s FTP client to load and unload programs from a PC.
Communication between the machine and a PC.
Machining programs can be written and stored on a PC. These can then be transferred to or from the machine through either the RS232 interface using the free CMZcom program or a memory card.
Manual Guide i.
Conversational programming simplifies programming and program proving.
Tool life management (optional).
16 groups of up to 16 tools per group can be established so that when the life of the tool is over, either through the number of times that this has been called up or through cutting time, the machine automatically changes to the following tool from that group.
Introduce a memory card and use it as a hard drive.
Insert a memory card then save and execute programs from it. The memory card can be installed permanently into the covered slot on the front panel. Once fitted, the cover can be closed for protection.
Tool load monitoring (optional).
This function memorises the power consumption of each tool when the tool is new. Any change in power consumption is used to detect either a worn tool or a broken tool. This reduces the danger of accidents and rejects when working unattended jobs.
CMZ.com program for communication via a RS232.
You can download this program free of charge from
our website.
Screen for displaying the state of tool life. Screen for typing values of tool wear
and breakage.
20 21
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
BORING & DRILLING HOLDERS (Ø40) LIVE TOOL HOLDERS (4000 rpm or 12000 rpm)
BORING HOLDERS (Ø50)
TL20/10400/01 Max: 4000 rpm
TL20/10400/04 Max: 4000 rpm TL20/10400/06 Max: 12000 rpm
TL20/10400/08 Max: 12000 rpm
TL20/10000/14 (Ø8mm) TL20/10000/15 (Ø10mm) TL20/10000/16 (Ø12mm) TL20/10000/17 (Ø16mm) TL20/10000/18 (Ø20mm) TL20/10000/19 (Ø25mm) TL20/10000/20 (Ø32mm)
TL20/10000/09 (Ø40mm) TL20/10000/41 (MT4) TL20/10000/39 (Ø50mm) TL20/10400/03 Max: 4000 rpm
TL20/10400/05 Max: 4000 rpm
TL20/10400/07 Max: 4000 rpm TL20/10400/09 Max: 12000 rpm
TL20/10000/10 (Ø40mm)
TL20/10000/40 (Ø50mm)
BORING HOLDERS (Ø60)
TURNING HOLDERS OTHERS
TL15/10000/05 TL20/10051 & TL20/10054
TL20/10000/21 (Ø8mm) TL20/10000/22 (Ø10mm) TL20/10000/23 (Ø12mm) TL20/10000/24 (Ø16mm)
TC35/10000/54 (Ø60mm)
TL20/10000/06
TL20/10000/44
TL20/10000/03 TL20/10000/37
TC35/10000/55 (Ø50mm) TC35/10000/56 (Ø40mm)
TL20/10000/25 (MT2) TL20/10000/26 (MT3)
TL15/10000/33 (Ø16mm) TL15/10000/34 (Ø20mm) TL15/10000/35 (Ø25mm) TL20/10000/42 (Ø32mm)
TL20/10000/38 (Ø40mm)
TL20/10000/12 (Ø40mm)
DOUBLE BORING HOLDERS (Ø32)
TL20/10000/11 (Ø32mm)
TL20/10000/27 (Ø8mm) TL20/10000/28 (Ø10mm) TL20/10000/29 (Ø12mm) TL20/10000/30 (Ø16mm) TL20/10000/31 (Ø20mm) TL20/10000/43 (Ø25mm)
TL20/10000/32 (MT2) TL20/10000/36(Ø10mm)
TL20/10000/07
TL20/10000/08
TL20/10000/13
TL20/10000/45
TL20/10000/57
22 23
TRAVELS WITH LIVE TOOL
TRAVELS WITH TAILSTOCK
Excellent benefits from high quality manufacturing
CMZ Machinery Group, S.A.
Y AXIS TRAVEL
STANDARD CHUCKS DIMENSIONS
24 25
TRAVELS WITH SUB SPINDLE
TRAVELS WITH LIVE TOOL
CMZ Machinery Group, S.A.
z400
z640
z1100
Dimensions
Due to constant development of our products all specifications given here in are subject to change without notice.
26 27
z400 z640 z1100
TEC
HN
ICA
L SP
ECIF
ICAT
ION
S
Technical data
TA15 TA20 TA25 TA30
TA
15
TA
15
M
TA
15
Y
TA
15
S
TA
15
MS
TA
15
YS
TA
20
TA
20
M
TA
20
Y
TA
20
S
TA
20
MS
TA
20
YS
TA
25
TA
25
M
TA
25
Y
TA
25
S
TA
25
MS
TA
25
YS
TA
30
TA
30
M
TA
30
Y
TA
30
S
TA
30
MS
TA
30
YS
Ge
ne
ral
Data
Maximum diameter of swinging over bed (mm) 760 760 760 760
Maximum diameter of swinging over slides (mm) 600 600 600 600
Maximum turning diameter (mm) 460 460 460 460
Distance between spindle and
tailstock centre
TA - 400 490mm - 473mm - 473mm - 449mm -
TA - 640 730mm - 713mm - 713mm - 689mm -
TA - 1100 1190mm - 1173mm - 1173mm - 1149mm -
Distance between centre of
spindles
TA - 640 - 666mm - 649mm - 649mm - 625mm
TA - 1100 - 1126mm - 1109mm - 1109mm - 1085mm
X-axis travel (mm) 310 310 310 310
Z-axis travel (mm)
TA - 400 400 400 400 400
TA - 640 640 640 640 640
TA - 1100 1100 1100 1100 1100
Y-axis travel (mm) - - +70
-50 - -
+70
-50 - -
+70
-50 - -
+70
-50 - -
+70
-50 - -
+70
-50 - -
+70
-50 - -
+70
-50
B-axis travel (mm)
TA - 400 400 - 400 - 400 - 400 -
TA - 640 640 640 640 640 640 640 640 640
TA - 1100 1100 1100 1100 1100 1100 1100 1100 1100
Fast feedrate X (m/min) 30 30 30 30
Fast feedrate Z (m/min) 30 30 30 30
Fast feedrate Y (m/min) - - 15 - - 15 - - 15 - - 15 - - 15 - - 15 - - 15 - - 15
Fast feedrate B (m/min) 11 30 11 30 11 30 11 30
Axis acceleration 1g=9,8 m/s2 1g=9,8 m/s2 1g=9,8 m/s2 1g=9,8 m/s2
Sp
ind
le
Maximum speed 4500 4000 4000 3500
Bearing outside diameter 150 170 170 200
Bearing inside diameter 100 110 110 130
Spindle nose ASA 6” A2 ASA 6” A2 ASA 6” A2 ASA 8” A2
Spindle inside diameter 61 73 73 86
Bar diameter 52 66 66 78
Chuck diameter 175 / 210 210 250 / 210 250 / 315
Chuck bore 56 / 52 66 66 77
Spindle power (kW) (max./ S6 40%) 14 / 8 22 / 15 35 / 19 42 / 27
Turning torque (max./ S640%) 292 Nm (max)
153 Nm (S6 40%)
366 Nm (max)
286 Nm (S6 40%)
900 Nm (max)
363 Nm (S6 40%)
1020 Nm (max.)
720 Nm (S6 40%)
Tail
sto
ck
Morse taper MT3/MT5 - MT3/MT5 - MT3/MT5 - MT3/MT5 -
Tailstock travel (mm)
TA/400 400 - 400 - 400 - 400 -
TA/640 640 - 640 - 640 - 640 -
TA/1100 1100 - 1100 - 1100 - 1100 -
Max. force (kgf) 930 - 980 - 980 - 1350 -
Tu
rre
t
Number of positions 12 12 12 12
Section of tools (mm) 25x25 (50) 25x25 (50) 25x25 (50) 25x25 (50)
Changing time 30º 0,2 s - 180º 0,5 s 30º 0,2 s - 180º 0,5 s 30º 0,2 s - 180º 0,5 s 30º 0,2 s - 180º 0,5 s
Interlocking force at 45 bar (kgf)
5090
5090
5090
5090
Dri
ve
n
too
ls
Number of driven tools - 12 - 12 - 12 - 12 - 12 - 12 - 12 - 12
Turning speed (rpm) - 12000 - 12000 - 12000 - 12000 - 12000 - 12000 - 12000 - 12000
Power (kW) (max./S1) - 11,3/8,1 - 11,3/8,1 - 11,3/8,1 - 11,3/8,1 - 11,3/8,1 - 11,3/8,1 - 11,3/8,1 - 11,3/8,1
Maximum torque - 75Nm - 75Nm - 75Nm - 75Nm - 75Nm - 75Nm - 75Nm - 75Nm
Su
bsp
ind
le
Maximum speed (rpm) - 4500 - 4500 - 4500 - 4500
Bearing outside diameter (mm) - 150 - 150 - 150 - 150
Bearing inside diameter (mm) - 100 - 100 - 100 - 100
Spindle nose - ASA 6” A2 - ASA 6” A2 - ASA 6” A2 - ASA 6” A2
Spindle inside diameter (mm) - 61 - 61 - 61 - 61
Bar diameter (mm) - 52 - 52 - 52 - 52
Chuck diameter (mm) - 175 - 175 - 175 - 175
Chuck bore (mm) - 56 - 56 - 56 - 56
Power (kW) (max./ S6 40%) - 14/8 - 14/8 - 14/8 - 14/8
Turning torque (Nm) (max./S6 40%) - 292 / 153 - 292 / 153 - 292 / 153 - 292 / 153
Mis
cell
an
eo
us
Lateral disposal coolant tank
(litres)
TA - 400 220 220 220 220
TA - 640 230 230 230 230
TA - 1100 260 260 260 260
Rear disposal coolant tank (litres) 200 200 200 200
Hydraulic oil tank (litres) 10 10 10 10
Lubrication oil tank (litres) 4 4 4 4
Installed power (KVA) 30 30 30 45 45 45 30 30 30 45 45 45 45 45 45 45 45 65 45 45 45 45 45 65
Functioning voltage 400V 50Hz ±5 [230V 50Hz ±5%]
Maximum environmental temperature 35 ºC 35 ºC 35 ºC 35 ºC
Total weight (kg)
TA - 400 5400 - 5600 - 5600 - 5800 -
TA - 640 5700 6100 5900 6300 5900 6300 6100 6500
TA - 1100 6600 7000 6800 7200 6800 7200 7000 7400
Dimensions (mm)
TA - 400 2302 x 1760 x 1880 2302 x 1760 x 1880 2302 x 1760 x 1880 2302 x 1760 x 1880
TA - Y - 400 2302 x 1760 x 2120 2302 x 1760 x 2120 2302 x 1760 x 2120 2302 x 1760 x 2120
TA - 640 2542 x 1760 x 1880 2542 x 1760 x 1880 2542 x 1760 x 1880 2542 x 1760 x 1880
TA - Y - 640 2542 x 1760 x 2120 2542 x 1760 x 2120 2542 x 1760 x 2120 2542 x 1760 x 2120
TA - 1100 3435 x 1860 x 1936 3435 x 1860 x 1936 3435 x 1860 x 1936 3435 x 1860 x 1936
TA - Y - 1100 3435 x 1860 x 2230 3435 x 1860 x 2230 3435 x 1860 x 2230 3435 x 1860 x 2230
CMZ Machinery Group S.A
Azkorra s/n 48250 Zaldibar-Spain Tel. +34 94 682 65 80 Fax +34 94 622 53 25 [email protected] www.cmz.com
CMZ France SAS
Parc Techologique Nord 65, Avenue Condordet 38090 VALUX MILIEU-France Tel. +33 (0) 4 74 99 03 22 Fax +33 (0) 4 74 94 74 01
[email protected] www.cmz.fr
CMZ UK Ltd
6 Davy Court Central Park Rugby CV23 0UZ - United Kingdom Tel. +44 (0) 1788 56 21 11 Fax +44 (0) 1788 56 21 22
[email protected] www.cmz.com
DISTRIBUTOR
CMZ Deutschland GmbH
Holderäckerstr.31 70499 Stuttgart Germany Tel. +49 (0) 711 469204 60 Fax +49 (0) 711 469204 80
[email protected] www.cmz.com
CMZ Italia S.r.l
Via Arturo Tjoscanini 6 20020 Magnago (Mi) Italy Tel. +39 (0) 331 30 87 00 Fax +39 (0) 331 30 87 08
[email protected] www.cmz.com