cmse 2013 conference guide - cmseconf.org conference guide.pdfdr beniwal’s research interests are:...

1

CMSE 2013 CONFERENCE GUIDE

TABLE OF CONTENTS

TABLE OF CONTENTS ............................................................................................................................................ 1

PART I CONFERENCE SCHEDULE ............................................................................................................... 2

PARTⅡ INVITED KEYNOTE SPEAKERS .......................................................................................................... 4

KEYNOTE SPEAKER: DR. ELIAS C. AIFANTIS ...................................................................................................... 4

KEYNOTE SPEAKER: DR. ALEXANDER O. KHOTSIANOVSKY ................................................................................ 5

KEYNOTE SPEAKER: DR. R S BENIWAL .............................................................................................................. 6

PART Ⅲ INVITED KEYNOTE SPEECHES ......................................................................................................... 7

KEYNOTE SPEECH 1 NANOMATERIALS AND NANOTECHNOLOGY: A GRADIENT NANOMECHANICS PERSPECTIVE ... 7

KEYNOTE SPEECH 2 IMPROVEMENT OF STRENGTH AND THERMOCYCLIC CREEP RESISTANCE OF METAL

PRODUCTS WITH ION-PLASMA NITRIDE COATINGS BY PULSE TECHNIQUE IMPLEMENTATION ............................... 8

KEYNOTE SPEECH 3 RECENT DEVELOPMENTS IN MATERIALS SCIENCE .............................................................. 9

PART Ⅳ ORAL SESSION ..................................................................................................................................... 10

ORAL PRESENTATION ...................................................................................................................................... 10

PART Ⅴ POSTER SESSION ................................................................................................................................. 12

POSTER PRESENTATION ................................................................................................................................... 12

PART Ⅵ HOTEL INFORMATION ...................................................................................................................... 20

PART Ⅶ TOURISM ............................................................................................................................................... 23

YINSHUI CAVE ................................................................................................................................................ 23

2

Part I Conference Schedule

November. 20 ~ 22, 2013

08:00-18:00 Registration Location: Kaiyue Hotel, Xianning

Thursday Morning, Nov. 21

Time Activity Location

08:45-09:00 Opening Ceremony

Room 402, 4th floor,

The 3rd Teach Building,

Hubei University of

Science and Technology

09:00-12:00 Poster Presentation

(Detailed information please see Part Ⅴ Poster Session)

Lobby of the 4th floor,


Hubei University of


Thursday Noon, Nov. 21

12:00-13:00 Lunch Location: 2nd floor, Buffet Restaurant, Kaiyue Hotel

Thursday Afternoon, Nov. 21

Time Activity Location

14:30-15:30

Keynote Speech 1

Nanomaterials and Nanotechnology: A Gradient Na-nomechanics Perspective

Dr.Elias C. Aifantis

Room 402, 4th floor,


Hubei University of


15:30-15:40 Coffee Break

15:40-16:40

Keynote Speech 2

Improvement of Strength and Thermocyclic Creep Resistance of Metal Products with Ion-plasma Ni-tride Coatings by Pulse Technique Implementation

Dr. Alexander Khotsianovsky

16:40-17:40 Keynote Speech 3

Recent Developments in Materials Science

Dr. R S Beniwal

3

Thursday Evening, Nov. 21

18:00-19:00 Dinner Location: 3rd floor, Chinese Restaurant, Kaiyue Hotel

Friday Morning, Nov. 22

Time 08:30-11:30

Location Room L5-208, 2nd floor, The 5th Teach Building

Hubei University of Science and Technology

Activity Oral Presentation (Detailed information please see Part Ⅳ Oral Session)

Friday Noon, Nov. 22

11:50-13:00 Lunch Location: Liu Jia Qiao Restaurant (a famous local restaurant)

Friday Afternoon, Nov. 22

13:00-20:00 Departure from Liu Jia Qiao Restaurant to Yinshui Cave

(Detailed information please see Part Ⅶ Tourism)

4

PartⅡ Invited Keynote Speakers

Keynote Speaker: Dr. Elias C. Aifantis

Dr. Elias C. Aifantis Aristotle University of Thessaloniki, GR Michigan Tech, USA King Abdulaziz University, SA

PROFESSIONAL BACKGROUND Elias C. Aifantis graduted from Nat. Tech. Univ. Athens/Greece (Diploma 1973); and from Univ. of Minnesota/USA (Ph.D 1975). He was appointed as an Assistant Professor in 1976 at the Uni-versity of Illinois, Urbana-Champaign; as a Visiting Professor at the University of Minnesota in 1980; and a tenured Full Professor at Michigan Technological University (MTU) in 1982. Upon a special invitation (metaklisi) he joined Aristotle University of Thessaloniki (AUT) as a Profes-sor of Mechanics in 1989 (former Chair of G. Lianis), a position he holds today. Until 2010 he was a Distinguished Research Professor at MTU. After that he became an Emeritus Professor of MTU and also a Distinguished Adjunct Professor of King Abdulaziz University (KAU) of Saudi Arabia. He has published over 500 papers as articles in scientific journals and chapters in books, in the following areas: Diffusion, Flow through Porous Media, Environmental Cracking, Phase Transformations, Micromechanics of Plasticity and Fracture, Material Instabilities: Dislocation Patterning / Shear Banding / Damage Localization, Soil / Rock Mechanics, Nanostructured Ma-terials. [He coined the terms Double Diffusivity, Chemomechanics, Material Instabilities, Dislo-cation Patterning, Nanomechanics]. He is listed by ISI as a Highly Cited Researcher in Engi-neering, mainly for his pioneering work on gradient material mechanics. He has been invited in over 500 occasions to speak in conferences, universities, and research la-boratories in USA, Europe, Russia and FSU, Australia, Japan, China, South America and South Africa; he organized over a dozen Workshops/Symposia/Conferences and served as a Member of Organizing Committees for over two dozen International Conferences. He is Editor in Chief of the J. Mechanical Behavior of Materials (ISSN 0334-8938); Honorary Editor of Computer and Experimental Simulations in Engineering and Science (ISSN 1791-3829); and serves on the Ad-visory/Editorial Board of: Reviews on Advanced Materials Science (ISSN 1605-8127); Materials Physics and Mechanics (ISSN 1605-8119); Acta Mechanica Solida Sinica (ISSN 0894-9166); Mechanical Sciences (ISSN 2191-9151); J. Control Engineering and Technology (ISSN 2223-2036); Open Mechanics Journal (ISSN 1874-1584), Materials Science, as well as Materials Sciences & Applications. [Formerly: Acta Mechanica (ISSN 0001-5970), J. Nano Research (ISSN 1662-5250); Mechanics of Cohesive-Frictional Materials (ISSN 1099-1484); Numerical and Analytical Methods in Geomechanics (ISSN 106-222).]

5

Keynote Speaker: Dr. Alexander O. Khotsianovsky

Dr. Alexander O. Khotsianovsky Pisarenko Institute of Problems of Strength of the National Acad-emy of Sciences of Ukraine, Ukraine

PROFESSIONAL BACKGROUND Dr. Alexander O. Khotsianovsky graduated from the Kiev Polytechnical Institute with diploma of mechanical engineering researcher, and continued his post-graduate studies at the Pisarenko In-stitute of Problems of Strength of the National Academy of Sciences of Ukraine, then got his Ph.D degree in 1990: Life Prediction of Structural Steels and Alloys under Fretting Fatigue for Fatigue Crack Propagation Stage. During 1982 to 1996, he played a role as a research fellow at the Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine. He serves as the executive secretary (since February 2013 - Acting Associate Editor) of journal Strength of materials Senior as well as a research fellow at the Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine, Kiev since 2002. Dr. Alexander O. Khotsianovsky’s scientific mainstream is: calculation and life prediction of critical aerospace and naval components, numerical simulation of fretting-fatigue and contact fatigue, residual stresses, mixed mode fracture, surface strengthening and coating protection as-sessment. He worked on personal R&D work in collaboration with the Paton Welding Insitute of the National Academy of Sciences of Ukraine on numerical simulation and life prediction of critical elements of Mir orbital station. Fretting fatigue crash predictions necessitated in-situ re-placement and reinforcement of bearing components of the energy system of solar batteries dur-ing 1991 to 1992, and R&D work on improvement of super-fast vessel cavitators under personal contract with the U.S. Office of Naval Research Global (ONRG) GRANT NUMBER N62909-11-1-7045 from 2011 to 2013. Meanwhile, he is also engaged in peer reviewing, editing and proofreading of Strength of Materials journal by personal contract with Kluwer/Plenum and Springer publishers (peer-reviewed over 300 articles and personally edited over 60 English is-sues of journal) since 2002.

6

Keynote Speaker: Dr. R S Beniwal

Dr. R S Beniwal

CSIR-National Institute of Science Communication and Infor-mation Resources, INDIA

PROFESSIONAL BACKGROUND Dr R S Beniwal received his B.Sc., M.Sc. and Ph.D. degrees in Physics from the University of Rajasthan, Jaipur, INDIA in 1980, 1982 and 1987 respectively. During 1987-1990, he served The Institution of Electronics and Telecommunication Engineers, New Delhi, India. Since July 1990, he has been with the Council of Scientific & Industrials Research – National Institute of Science Communication and Information Resources (CSIR-NISCAIR), New Delhi, INDIA, where he is currently a Senior Principal Scientist. Dr Beniwal has published over 50 research papers in In-ternational SCI journals in the areas of materials science, solar thermal, composite materials. He has edited two books and contributed in four books. Dr Beniwal’s research interests are: Materials Science, Thermal Properties of Materials, Heat Transfer, Solar Thermal, and Composite Materials. He is in the Editorial Boards of many re-search journals and reviewer for various international journals. Presently, Dr Beniwal is a mem-ber of the Institution of Electronics and Telecommunication Engineers, New Delhi (India), In-ternational Solar Energy Society, Germany, Profession Association in Modern Manufacturing Technologies, Iasi-Romania, People Oriented Science & Technology Society, India. Dr Beniwal has also been a member of a number of national and international scientific committees. Deliv-ered lectures, presented papers and chaired the technical sessions in various conferences. He has attended more than 60 conferences. Recently, he visited Taiwan, Portugal and China, where de-livered the Keynote Speeches and chaired the technical sessions in international conferences. He served as Editor-in-Chief of IETE Technical Review, Research Journal of IETE, IETE Journal of Education, Indian Journal of Technology. He has been the Founder Editor of Indian Journal of Engineering & Materials Sciences and Indian Journal of Chemical Technology.

7

Part Ⅲ Invited keynote Speeches

Keynote Speech 1 Nanomaterials and Nanotechnology: A Gradient

Nanomechanics Perspective

Speaker: Dr.Elias C. Aifantis

Aristotle University of Thessaloniki/GR, Michigan Tech/USA,King Abdulaziz University/SA

Time: 14:30-15:30, Thursday Afternoon, Nov. 21

Location: Room 402, 4th floor, The 3rd Teach Building, Hubei University of Science

and Technology

Abstract The lecture reviews first some initial observations of the author and his co-workers concerning the basic deformation mechanisms for nanopolycrystals (NCs) and ultrafine grain polycrystals (UFGs). Then, their two main findings (i.e. the emergence of two co-existing phases/bulk and grain boundaries and the dominance of nanovoid formation and grain rotation/sliding as opposed to dislocation slip in the grain interior) are used to motivate some metal physics and strength of materials models for interpreting associated experimental findings.These observations are also used to construct gradient continuum mechanics models of nanoelasticity, nanoplasticity and nanodiffusion to be employed in relation to the formulation and solution of related boundary value problems at the nanoscale. Some new experimental findings on serrated stress-strain graphs and size effects observed during micropillar compression that cannot be captured by standard models are now interpreted through stochastically enchanced gradient models.

8

Keynote Speech 2 Improvement of Strength and Thermocyclic Creep

Resistance of Metal Products with Ion-plasma Nitride Coatings by

Pulse Technique Implementation

Speaker: Dr. Alexander Khotsianovsky

Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine,

Ukraine



and Technology

Abstract

The lecture covers the issues of innovative technologies developed by the author and his co-workers from Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine, in particular, ion-plasma coating deposition pulse technique, which offers a consid-erable opportunity for producing diffusion layers of a desired structure since the process of diffu-sion saturation is controllable and can be optimised depending on the specific engineering re-quirements. A short review of the state-of-the-art developments in this area is provided, which implies that diffusion layers with an ion phase (nitride) area or nitrided layers with no nitrided zone can be prepared by adjusting the composition of ionized gases and glow charge intensity. The proposed innovation, which is nationally patented in 2013, provides improvement of strength and thermocyclic creep resistance of metal products and is currently used by the Insti-tute for small-scale industrial implementation in domestic aircraft and machinery repair shop-and-plants. Problems of implementation in Ukraine and other countries of this and several other innovative developments in material science of Ukraine are also analysed from the standpoint of the author’s experience of R&D work in Western and Ukrainian companies, as well as critical problems of material science and industry in Ukraine, which enhance or jeopardize possible co-operation with international industrial companies and scientific community. Current examples of cutting-edge technologies turning into blunt-edge or cul-de-sac directions or pure outsourcing activities are discussed. The academic and R&D points of view on problems and perspectives of implementation of cut-ting-edge technologies of material science are also complemented with a relevant inside editorial view of the international journal “Strength of Materials”, which covers the material strength-related articles and is published by the Pisarenko Institute of Problems of Strength, Ukraine and Springer, US.

9

Keynote Speech 3 Recent Developments in Materials Science

Speaker: Dr.R S Beniwal

CSIR-National Institute of Science Communication and Information Resources, India



and Technology

Abstract

In this talk, a chronology of development of materials with time has been discussed. Materials have been important part of our civilization. The development of materials from stone age to modern information age has been described. The innovation of smelting and casting metals change the way that cultures developed and interacted with each other. Progressive use of more sophisticated materials showed an innovative divide between people. The twentieth century witnessed a very impressive growth of technologies in producing ultra high purity chemicals, metals, ceramics, composites, semiconductors and dielectric materials. All these developments, based on multidisciplinary approach, influenced the world economy in a significant way. Starting from the basic concepts of atoms and molecules and understanding their important roles in imparting characteristic properties of solid, liquid and gaseous phases, exten-sive efforts were made simultaneously to grow high quality single crystal semiconductors and other related materials. The significant roles of atoms and molecules in imparting uniquely dif-ferent physical and chemical properties especially dependent on shape and size are currently be-ing studied. The nanoparticle size materials are very important and they have applications in every sphere of life including physics, chemistry, biology, medicine, materials science, engineering and technol-ogy. A complete understanding of the relationship between nanoparticle size and composition to their physical, chemical and biological behaviours is essential to use them. Hence, it may be quite possible to synthesize a material with desired properties.

10

Part Ⅳ Oral Session

Oral Presentation

Devices Provided by the Conference Organizer:

Laptops (with MS-Office & Adobe Reader)

Projectors & Screen

Laser Sticks

Materials Provided by the Oral Presenters:

PowerPoint

Duration of each Presentation (Tentatively):

Regular Oral Session: 10 Minutes of Presentation, 5 Minutes of Q&A

Oral Presentation

Time: Nov.22, 08:30-11:30 Location: Room L5-208, 2nd floor, The 5th Teach Building, Hubei University of Science and Technology Paper ID Paper Title Author

MSE1988

Influence of sintering temperature on microstructure and mechani-

cal properties of Fe-2%Ni-2%Cu alloy processed by metal injection

molding Young Gun Ko

MSE1882

Stress Analysis of Forward Aluminum Extrusion Process Using Fi-

nite Element Method

Hani Mizhir

Magid

MSE2148

The effect of Heat Input on the Microstructure of Tungsten Inert

Gas Welding Used Hastelloy X Baek Eung-Ryul

MSE1150 Nucleation mechanism of IGF in the HAZs of Ti-killed HSLA steel Wu Run

MSE1175

Research on cutting-temperature field and distribution of heat rates

among work piece, cutter and chip for high-speed cutting based on

analytical and numerical methods Hu-ping An

MSE1448 Specimen Size Effects on Mode II Fracture Toughness of Concrete Shaowei Hu

MSE2168 Analysis of fracture behavior of polycrystalline diamond thin films Duosheng Li

MSE1942

Preparation and characterization of porous titanium using plasma

activated sintering technique Y. B. Hu

MSE1477

The Analysis of Natural Frequency of a Free Damping Composite

Cylindrical Shell Submerged in Viscous Fluids T.Y. LI

MSE1940

Study on the evaporation and decomposition process of urea water

solutioninselective catalytic reduction system Youhong Xiao

11

MSE1967

The effect of Pt on the adherence of γ'-Ni3Al/Al2O3 interface of

thermal barrier coatings investigated by first-principle molecular

dynamics Yung-mau Nie

MSE1954

Structural and Electrical Characterizations of BiFeO3 MOS Capac-

itor Senol KAYA

MSE2273

A smoothed fem based verification method for the computation of

strain energy release rate in functionally graded materials Z.C. Xuan

MSE2146

A Study on the Auto-body of Lancing Process Method Using

Forming Analysis Kim Dong Hong

MSE2224

Study on Modal and Structural Analysis of Transferred Hydraulic

Press for the Roll Forming process Kim Dong Hong

MSE2276

Performance of chemical heat storage system in direct steam gener-

ation Tsuyoshi Kito

NOTE: If you want to make an oral presentation but your paper ID is not included in the list, please contact the orginazing committee or the session chair to arrange it.

12

Part Ⅴ Poster Session

Poster Presentation

Materials Provided by the Conference Organizer:

X Racks & Base Fabric Canvases (60cm×160cm, see the figure below)

Adhesive Tapes or Clamps

Materials Provided by the Presenters:

Home-made Posters

Requirement for the Posters:

Material: not limited, can be posted on the Canvases

Size: smaller than 60cm×160cm

Content: for demonstration of the presenter’s paper

Requirement for the Presenters:

Stand beside his (her) Poster through the Session, and

discuss with the readers about his (her) paper.

Poster Presentation

Time: Nov.21, 09:00-12:00 Location: Lobby of the 4th floor, The Meeting Hall, The 3rd Teach Building, Hubei Univer-sity of Science and Technology Paper ID Paper Title Author

MSE1002 Damage research of magnesia carbon refractory Zhigang Wang

MSE1005

Improved mechanical properties of beta-tricalcium phosphate by the

addition of akermanite and 45S5 bioglass Shuping Peng

MSE1011

Thermal Insulation Performance Analysis of Nanoporous Thermal In-

sulating Materials Applied in Torpedo Ladle J. K. Yu

MSE1012

Microstructure Evolution of Fumed Silica Compacts during Compres-

sion, Thermal Treatment and Doping Process J. K. Yu

MSE1024

Effect of boron doping on the microstructure of directionally solidified

Ti-46Al-2Cr-2Nb alloy Yuan Zhang

MSE1033 Influence of Limestone powder on Hydration of Complex binders Shuhua Liu

MSE1037

Preparing Thermal-Conductive CB/PP Composites by PCS Process and

Their Thermal-Conductive Property Study X.Y.Hao

MSE1048 Research on the Force of Large Chips’ Breaking in Heavy-duty Cutting SUN Shouhui

13

MSE1067

Study on Static and Dynamic Stress-Strain Relationship of Cement

Mortar Material Lu Dechun

MSE2090 Synthesis, Characterization and Wear Performance of W-Al Coatings S.H. Yao

MSE1358

Wavelet-Based FDTD and High-Resolution Spectral Estimation for

Calculations of Band Structures in Two-Dimensional Phononic Crystals Zhi-Zhong Yan

MSE1081

Compact Waveguide Bandpass Filter Employing 2D Metallic Photonic

Crystals for Millimeter to Terahertz Frequencies* Feng Lan

MSE1085

Study on the discrete relaxation time spectrum for PBO/PPA liquid

crystal polymer solution Jun Qian

MSE1043

Investigation of Material Removal Variations during Abrasive Flow

Machining K H Zhang

MSE1087

Ballistic performance of titanium alloy encapsulated ceramic composite

plates G.W. Liu

MSE1106

Effect of curing temperature on setting time, strength development and

microstructure of alkali activated slag cement Yonghao Fang

MSE1108

Reaction mechanism of MgO-ZrO2 refractory with

CaO-SiO2-Al2O3-FetO slag J K Yu

MSE1111

Mechanical Behavior Research of Long-span Prestressed

Steel-Concrete Composite Beam Zhi Huang

MSE1074

The influence of preparation process on electrocatalytic activity of

Ti/IrO2+MnO2 anodes for oxygen evolution in 0.5M Na2SO4 solution G.W. Liu

MSE1117

Directional, Averaged and Density-of-States Effective Masses of Hole

in (001), (101) and (111) Biaxially-Strained-Si and Strained-Si1-xGex

Materials Zhang Chao

MSE1140

The Connection Mechanism Research on Friction Stir Spot Welding

Without Keyhole between Magnesium and Steel Dissimilar Alloys Weihong Li

MSE1167

A Numerical Study on Flow Characteristics of Moving Bubble Train in

a Converging-Diverging Duct Zhang F. H.

MSE1153

Removal of methylene blue using a photocatlytic slurry reactor coupled

with ceramic membrane crossflow filtration process Shi Zaifeng

MSE1154

Numerical simulation of flux reduction in crossflow microfiltration with

consideration of pore and particle size distribution Shi Zaifeng

MSE1283

The formation law of dense NiFe2O4-NiAl2O4-FeAl2O4 ceramic layer

on the surface of NiFe2O4 based ceramic inert anode for aluminum

electrolysis Han-bing HE

MSE1183

Effect of potassium chloride amount on structures of hydrothermally

grown KNbO3 nanstructure Bin Yu

MSE1187

Reaction synthesis of vanadium carbide particulate reinforced

iron-based composite Sijing Fu

MSE1188

Study on the Surface Structure and Properties of PMMA/PEG Copoly-

mer Coatings Wei Zhang

MSE1191 Predicting the Shear Strength of Round Clinched Joint F.Xu

MSE1198

Atom diffusion and bonding behavior between titania nanofilm and

glass substrate Guojun Ji

MSE1652

Flexure Characteristic of Circular CFRP and Hybrid Structure for Pure

Flexural Ji Hoon Kim

14

MSE1199

Fuzzy C-means Clustering Recognition in Ultrasonic Fault Detection

in bonding Steel Plate and Rubber Material Runjing Zhou

MSE1201 Reaction Mechanism of CaO-SiO2-FetO-P2O5 Slag with Solid CaO J. K. Yu

MSE1216

The Compressive Properties of Closed-cell Al Foams with Different

Contents of Ceramic Microspheres Weimin Zhao

MSE1217

Simulation and Experimental Analysis of Influence of Inlet Flow on

Heavy Hydrostatic Bearing Temperature Field Li Guo Fan

MSE1220 Effects of sulfide on pit corrosion in a metallic glass steel Wang Shanlin

MSE1234

Phase and crystal structure of two kinds of fine aluminium-containing

inclusions in Mn13 high manganese steel Bo Liang

MSE1235

Preparation of Fe-Si coating on low-carbon steel and its evaluation of

magnetic properties and corrosion resistance Qingdong Zhong

MSE1240

Investigation on Alkali Activated Recycled Cement Mortar Powder

Cementitious Material Yonghao Fang

MSE1241

Effect of curing technology on the bonding properties of silicate wood

adhesive Yiqiang Wu

MSE1250

Adhesive strength and abrasive property of Fe-based composite coating

deposited by high velocity arc spraying H.L. Tian

MSE1251

Microstructure and wear resistance of arc sprayed Fe-based coating af-

ter surface remelting treatment H.L. Tian

MSE1261

Effect of SiC particle orientation anisotropy on the tensile properties of

spray-formed SiCp/Al-Si composite Wei Li

MSE1271

Strength Prediction Model of Particle Reinforced Shellproof Ceramic

Composite Xin-hua Ni

MSE1278

Study on Thermal Stress of Honeycomb Ceramic Regenerator with Dif-

ferent Parameters Yongqi Liu

MSE1298 Study of SiO2 Coat Preparation and Its Anti-coking Behaviour Q. Yang

MSE1308

Electrospun acetaminophen-loaded cellulose acetate nanofibers fabri-

cated using an epoxy-coated spinneret Deng-Guang Yu

MSE1335

Study on helical drill wear when drilling ELC Cr18Ni9TiN stainless

steel and accompanying phenomena in the cutting zone Jozef Jurko

MSE1337

Fatigue flexural behaviour of corroded RC beams strengthened with

CFRP sheets Li Song, Zhiwu Yu

MSE1341

Effect of compound inoculants Ti and Zr on as-cast microstructure and

mechanical properties of Al-Cu alloy Yang Chenggang

MSE1350

Synthesis and swelling behaviors of APT-g- PAMPS superabsorbent

composites by microwave irradiation J H Xu

MSE1365

Crack Resistance of Normal Concrete Subjected to Elevated Tempera-

tures YU Kequan

MSE1380

Voltammetric and Impedance Behaviors of Surface-treated Bo-

ron-doped Diamond Film Electrodes Liu Fengbin

MSE1382

Investigation on the performance of V2O5-WO3-TiO2-cordierite cata-

lyst modified with Cu, Mn and Ce for urea-SCR of NO Xinna Tian

MSE1402

Amorphous film of AlFeCoNiCuZrV high entropy alloy deposited by

direct current magnetron sputtering J. C. Li

15

MSE1412

Effect of surface tension on filling flow of carboxymethyl cellulose so-

lution in micro channel Daming Wu

MSE1417

Effect of SiC whiskers on the properties of porous silicon carbide ce-

ramic Hongsheng Zhao

MSE1420

First-principles study of the effects of Al doping on electronic structures

and optical properties of SnO2 Ling-zhi Zhao

MSE1423

Resonant properties of the complicated Microwave Cavity with Ceram-

ic Material for a New Type of Rubidium Clock XiaoXiao Li

MSE1428

Study on the photostabilisation of poly (p-phenylenebenzobisoxazole)

fibre Xiaoyun Liu

MSE1429

New equation for the description of chloride ions diffusion in concrete

under shallow immersion condition Feng Xing

MSE1430

Y3-x(Al0.9In0.1)5O12:Eu3+x: Preparation, Structure Effect on lumi-

nescent properties W. Zhang

MSE1431

Inside Air and Surface Temperature Characteristics of Window Systems

Depending on the Low-E Coating and Blind Location during Cooling

Period Kwang Ho Lee

MSE1438 Experimental Microscopic Study of Inner Pores of Calcareous Sand Zhu Chang-Qi

MSE1443 Phase diagram calculations of the Al-Cr-Nb-Ti quaternary system Yuqin Liu

MSE1444

Removal of ammonia from gasified biomass by selective catalytic oxi-

dation with ternary copper-based rare earth composite materials: cata-

lytic performance and materials cytotoxicity assessment Chang-Mao Hung

MSE1447 Study on Creep Characteristics of Oil-film Bearing Babbitt Jianmei Wang

MSE1452

Effect of High Temperature on Normal-Strength High-Performance

Concrete Gai-Fei Peng

MSE1459 Exploring Cr/CrNx/CryCz/Cr-DLC film for geophysical prospecting M. Deng

MSE1466

Effects of the Multiple Crosslinking Agent on the Structure and Proper-

ties of Polymethacrylimide (PMI) Foams Hong-yan TANG

MSE1467

nfluence of the composition proportion of manganese and copper on the

mechanical properties and the machining performance of ductile iron Rao, L.

MSE1490

Simulation and Experiment Research of Phase Transformation on the

Hot Stamping of 22MnB5 High-strength Steel Yujun Cai

MSE1507

Effect of friction stir welding on microstructure and wear properties of

7022 aluminium alloy H F Wang

MSE1511 Study on Fatigue Life of Plow Bit under Different Planning Parameters ZHANG Qiang

MSE1518 Preparing nano-HA powder by liquid precipitation Shao Zhongcai

MSE1522

Experimental Study on the Performance of High-strength Microbial

Mortar Xiaohui Cheng

MSE1528 Flexural capacity calculation of hybrid bars reinforced concrete beams Bin Jia

MSE1536

Study on micromechanical elastic-plastic-brittle damage model of con-

crete Da-guo Wang

MSE1548

Preparation and characterization of nanosized lead barium titanate thin

film by a nonaqueous sol-gel process Wein-Duo Yang

MSE1558

The Influences of Calcium Sources on Microbially Induced Carbonate

Precipitation in Porous Media H X Guo

16

MSE1562

Effects of SiO2 addition on Ba-excessive barium titanate ceramics sin-

tered in reducing atmosphere for laminated PTCR thermistors Jianqiao Liu

MSE1569

Effect of oxidized mesoporous carbon containing silver nanoparticle on

selectivity of adsorption desulfurization Jiang Hua

MSE1575

PEO coating as lubrication means for SPIF of a titanium sheet: charac-

teristics and performance G. Hussain

MSE1595

Effect of mold temperature on the separation and the orientation during

compression molding of fiber reinforced composites Jin-Woo Kim

MSE1596 Electrochemical response of ZrO2-incorporated titanium oxide film Young Gun Ko

MSE1613

Microstructure and Mechanical Properties of TiC Nanoparticle Rein-

forced Iron Matrix Composites Jeong-Min Kim

MSE1615

Effect of thickness on resistive switching characteristics of ZnMn2O4

films Hua Wang

MSE1634

Study on fibre orientation and fibre content of glass fibre reinforced

polymer Hyoung-Seok Kim

MSE1643 Macro-mesoporous silicon Bragg and microcavity structures Zhenhong Jia

MSE1646

The synthesis and cytotoxicity of carbon nanotubes/hydroxyapatite

in-situ composite powders prepared by chemical vapor deposition Baoe Li

MSE1659

Effects of waste material from solar panels on the mechanical properties

and durability of cement-based materials An Cheng

MSE1663

Novel forsterite scaffolds for bone tissue engineering: selective laser

sintering fabrication and characterization Shuping Peng

MSE1681

Effect of growth rate on the microstructure and microhardness in direc-

tionally solidified Ti-46Al-9Nb alloy Xinzhong Li

MSE1683

Analysis Method for Orange Peel Structure on Aluminum-lithium Alloy

Surface during Stretch Forming Process L.H.Zhan

MSE1702

Effect of Aging Treatment on Bonding Interface Properties

of Hot-Pressed Cu/Al Clad Material Dong-Su Bae

MSE1708

A methionine - Au nanoparticle modified glassy carbon electrode as an

efficient voltammetric sensor for determination of hydroquinone Jiahong He

MSE1709

Optimized Design of Structure for Orthotropic Piezoelectric Fibre

Composite Materials Based on Ansys Caifeng Chen

MSE1714 The test on the mechanical properties of solid backfill materials Yanli Huang

MSE1724 Thermodynamics Study of a Laser Detector with High Rotation Speed HuiMin Chen

MSE1727

Mechanical properties of thermoplastic composite laminations

of variable angle for conical shell H Y Fu

MSE1732

Annealing Effect on Microstructure and Mechanical Properties of Tita-

nium Nitride Thin Film Shiuh-Chuan Her

MSE1736 Comparison of Pt and Pd modified TiO2 gas sensors Maolin Zhang

MSE1746

Synthesis, Property and Application of PZT/P(VDF-TrFE）Composite

Film Fabricated on Polyimide Substrate W. B. Luo

MSE1756

Bond between high strength concrete with recycled coarse aggregate

and reinforcing bars S. U. Hong

MSE1778 A novel activator for synthesis of fly ash-based geopolymer Y.J. Zhang

17

MSE1785

Attenuation Model for Aging Performance-Resistance of Conductive

Asphalt Concrete S P Wu

MSE1795 An improved method of fatigue life assessment for TiAl alloys ZHANG Guotao

MSE1799

Research of patterned ultraviolet curing ink absorber in uncooled infra-

red detector Y. Shuai

MSE1811

Numerical analysis of crack propagation path using an advanced ele-

ment cracking method Z.P. Zhong

MSE1813

Microstructure and Properties of Mo-Cu alloys Produced by Powder

Metallurgy Tianguo Wang

MSE1816

Mechanical properties of WF/HDPE plastic compositesreinforced by

basalt fibers WANG Weihong

MSE1073

Corrosion evaluation of the steel material on steel box girder bridge by

comprehensive scoring method Fu Zhongqiu

MSE1821

The Simulation Study of Heat Energy Potential of Asphalt Solar Col-

lectors B Li

MSE1829

The effect of firing temperatures on phase formation, microstructure,

dielectric and ferroelectric properties of Ba(Zr0.05Ti0.95)O3 ceram-

ics prepared via combustion technique

Theerachai

Bongkarn

MSE1830

Simulation analysis of the impact of silicon substrate selection on the

performance of heterojunction solar cells Shui-Yang Lien

MSE1832

Microstructure and corrosion resistance of Cu0.9NiAlCoCrFe high en-

tropy alloy coating on AZ91D magnesium alloys by laser cladding Huang Kaijin

MSE1835

Phase Formation, Microstructure and Dielectric Properties of

Bi0.5(Na0.74K0.16Li0.10)0.5TiO3-Ba(Zr0.5Ti0.95)O3 Ceramics Pre-

pared via the Combustion Technique

Theerachai

Bongkarn

MSE1843 Evaluation of micro forming methods for shark skin replication Tae Wan Kim

MSE1848

Finite Element Analysis of Deformation Mechanism for Porous Materi-

als under Fluid-Solid Interaction Qingjie Zhu

MSE1850 Hot deformation behavior of Mg–Al–Zn alloys Kun-kun Deng

MSE1851

Structural and optical properties of C-Si codoped p-type and intrinsic

AlN crystal Honglei Wu

MSE1855

Pores Structure and Freezing Resistance of Nano-clay modified Ce-

ment-based Materials Fan Yingfang

MSE1863

A Study of Influence of Welding Parameters on the Weld Bead in a La-

ser Arc Hybrid Welding Process Using a Coaxial Monitoring System

and Image Processing Young Whan Park

MSE1875

Preparation of Compound Coating of Fluorine Conversion Layer and

Calcium Phosphate on AZ31 Magnesium Alloy Zhang Chunyan

MSE1897

Preparation of MWNTs/Polyaniline Composite Membranes by Filtra-

tion and Flash Welding Method Xiaoyan Li

MSE1899

The anti-ablation property of MoSi2-W multi-layer coating system de-

posited by APS Yanbo Liu

MSE1909

Characterisation of Calcium Phosphate Coating on Investment Cast

316L Stainless Steel Andril Arafat

18

MSE1911

Experimental research on the flexural toughness of green

high-performance fiber-reinforced cementitious composites

(GHPFRCC) LI Xiu-ling

MSE1914

Magnetic Studies in Mixed-metal Oxalate-bridged compounds

NBu4MAIInFeII1-n [FeIII (ox) 3] (MA=Mn, Zn) Yun He

MSE1926

Modified Nanoporous Membranes on Centrifugal Microfluidic Plat-

forms for Detecting Heavy Metal Ions

Hsing-Cheng

Chang

MSE1938

The effect of aging treatment on surface roughness, mechanical proper-

ties and fracture behavior of 6xxx and 7xxx aluminum alloys Ibrahim SEVIM

MSE1955

Influence of Terahertz Waves on the Unidirectional Carbon Fiber in

CFRP Composites Kwang-Hee Im

MSE1957

Fluorescence and Thermoluminescence of Bismuth Silicate- germanate

(Bi4Si3(1-x)Ge3xO12) Crystals Zhengye Xiong

MSE1968

Improvement of Mechanical Properties of Poly(Lactic Acid) by the In-

tegration of Sepiolite Nanoclays. Effect of Ultrasonication on Clay

Dispersion Ángel Fernández

MSE1975 A meso-scale site-bond model for elasticity: Theory and calibration Mingzhong Zhang

MSE1977

Research on the properties of TIG welded joints of high nitrogen nick-

el-free austenitic stainless steel and welding wire YANG De-chao

MSE1991

Synchrotron X-ray absorption of iron oxides synthesised by ultra-

sound-assisted co-precipitation: Effects of temperature and surfactant

Chitnarong Sirisa-

thitkul

MSE2003

Evaluation of mechanical properties and finite element modeling of a

Ti/Al clad sheet Heon Young Kim

MSE2014

Modeling and Experimental Investigation on Mixing Technique of

Graphite Modified Conductive Asphalt Mixture LIU Honghai

MSE2020

Crystallization Behavior and Biocompatibility of Poly(butylene succin-

ate)/Poly(lactic acid) Composites Ming-Chien Yang

MSE2021 Tribological Behaviour of NiCrBSi-WC(Co) Coatings S.H. Yao

MSE2045

The influence of oxidation time on microstructure and composition of

micro-arc oxidation coatings formed on zirconium Dong Limin

MSE2059

Targeting Adherence Properties of BCG/Fe3O4/Chitosan Thermosensi-

tive Gel Integrated Materials for Irrigation of Bladder Sun Kangning

MSE2069

Preparation and protein sustained release characteristic of calcium ti-

tanate nano-fiber Liu Cunping

MSE2070

Cytocompatibility evaluation of hydroxyapatite coating on titanium

surfaces by pulsed electrochemical deposition Liu Yong

MSE2073

The tribological properties of Zr/a-C:Zr/Zr-C:H-x coatings with various

pulsed-direct current power frequencies sliding against various normal

loading W.H. Kao

MSE2098 Mechanical and Die Soldering Properties of Al-Si-Mg-Mn Cast Alloy Chang-Yeol Jeong

MSE2106

Power series methodology for coupled static analysis of laminated

beams resting on elastic foundation Jaehong Lee

MSE2143

Properties of Adiabatic Temperature Rise on the Concrete Considering

Cement Content and Setting Time Kyungmo Koo

MSE2153

Weldability of the STS304L butt joints by CO2 laser-GMAW hybrid

welding Hee Seon Bang

19

MSE2163

Optimization of parameters for dynamic surface annealing of silicon

wafers Chia-Chin Chiang

MSE2176

Performance of A New Resin Cement in Rapid Manhole Vertical Ad-

justment (RMVA) Shu-Rong Yang

MSE2181

Influence of cement type on heat of hydration and temperature rise of

the mass concrete H. D. Yun

MSE2191 Size control of copper nanoparticle by electron beam irradiation Byung Cheol Lee

MSE2197 Piezoresistive Properties of CNT-Reinforced Cementitious Composites Seongcheol Choi

MSE2123 Selective surface hardening by laser melting of alloying powder Sang Wook Han

MSE1896

Non-Destructive Evaluation System of Metal Materials According to

Thermal Behaviors Jae-Yeol Kim

MSE1827

Dielectric and Ferroelectric Properties of PMN-PT-PZ Ceramics Pre-

pared via the Combustion Technique

Theerachai

Bongkarn

MSE1834

Phase Formation and Piezoelectric Properties of

(Pb0.95Ba0.05)(Zr1-xTix)O3 Ceramics Fabricated by the Solid State

Reaction Technique

Theerachai

Bongkarn

MSE1983

Formation of β-Tricalcium Phosphate Coating Layer on Titanium via

Micro-Arc Oxidation Y.G. Ko

MSE1809 Influence of temperature on fatigue crack propagation in TiAl alloys ZUO Yanrui

MSE2207 Junction Temperature Simulation of Multi-chip Module LED Package Byung Joon Baek

MSE2273

A smoothed fem based verification method for the computation of strain

energy release rate in functionally graded materials Z.C. Xuan

MSE1594

The Flexure Evaluation of Circular Pipe of Alloy Aluminum, Carbon

Composite and Hybrid Structure Jungho Kim

MSE2254

Effect of process parameters on forming depth of channels in fuel cell

bipolar plates fabricated using rubber forming process C. K Jin

MSE2255

Effect of Clearance and Pressure on Matrix Flow in U-bending of

Epoxy/Carbon Fiber Composites M. S. Lee

MSE1759

Friction and wear properties of semi-metallic friction composites with

bionic non-smooth structure Yunhai Ma

MSE1652

Flexural Characteristic of Circular CFRP and Hybrid Structure Mem-

bers for Pure Flexural Jung Ho Kim

MSE1679

Analysis of Strength and Stiffness of CFRP and Hybrid Shaped Circle

and Square for Axial Compression and Bending Load Jung Ho Kim

MSE1682

Characteristic Analysis of Carbon FRP Tube changed Cross-sectional

shape by Bending Load Jung Ho Kim

MSE2130

Conceptual structural layout generation in use for0-1’ material consid-

ering n-order eigenfrequency dependency Dongkyu Lee

20

Part Ⅵ Hotel Information

1. Hotel Information Kaiyue Hotel, located at No. 86, Xianning Avenue, Xianning, Hubei province, is a four-star hotel, whose business contains traveling, catering, entertainment, fitness, relaxing and commerce. Hotel Tel: +86-15997932410(Ms Xiao); +86-0715-8266888(Reception Desk) Address: No. 86, Xianning Avenue, Xianning City, Hubei province, China Rate: Standard Room RMB 218/night (Breakfast included) Single Room RMB 268/night (Breakfast included)

2. How to get to the hotel

From Wuhan

1) From the Wuhan Tianhe International Airport a. Take Airport Bus(Hankou Direction) → Hankou Railway Station* → Xianning Rail-

way Station → Kaiyue Hotel(by taxi) b. Take Airport Bus(Qingshan Direction) → Wuhan Railway Station** → Xianning

North Railway Station → Kaiyue Hotel(by taxi) c. Take Airport Bus(Wuchang Direction) → Wuchang Railway Station*** → Xianning

Station → Kaiyue Hotel(by taxi) 2) From the Hankou Railway Station or Jinjiadun Bus Station

Please transfer to the train to Xianning Railway Station* 3) From the Wuhan railway station

Please transfer to the train to Xianning North Railway Station** 4) From the Wuchang railway station or Hongji bus station

Please transfer to the train to Xianning Railway Station***

From Xianning

Whether you are from Xianning Station or Xianning North Station, take a taxi to the Kaiyue Ho-tel or Hubei University of Science and Technology is the most convenient choice ((fee: about RMB20,time: about 20 minutes). For non-Chinese attendees, please show the following information to the driver if you are taking a taxi:

请送我到：咸宁市咸宁大道 86 号，凯悦大酒店

21

*Hankou Railway Station to Xianning Station Timetable

NO Initial Station——Terminal Station Time minute Fee

K1201 Hankou Station-Xianning Station 09:47-11:11 84 15.5RMB

T95 Hankou Station-Xianning Station 17:00-18:26 86 39.5RMB

**Wuhan Railway Station to Xianning North Station Timetable


D2101 Wuhan Station-Xianning North Station 07:05-07:31 26 39.5RMB

G1001 Wuhan Station-Xianning North Station 07:28-07:52 24 39.5RMB













D2103 Wuhan Station-Xianning North Station 14:37-15:02 25 39.5RMB







***Wuchang Railway Station to Xianning Station Timetable


1803 Wuchang Station-Xianning Station 10:00-10:49 49 12.5RMB

K769 Wuchang Station-Xianning Station 03:52-05:08 76 12.5RMB













22


T145 Wuchang Station-Xianning Station 01:20-02:14 54 12.5RMB

T235 Wuchang Station-Xianning Station 21:22-22:07 45 12.5RMB

3. Map of the hotel

23

Part Ⅶ Tourism

Yinshui Cave

Yinshui Cave Geopark is located in Dafan town, Tongshan county, the nuclear power base of Hubei province. Yinshui Cave is the first geopark in the province, with a length of 5,158 meters. The cave has a grand size and looks majestic. It averages 30 meters high and 25 meters wide. Stal-actites stand in great numbers in the cave, resembling realistic figures and articles. Yinshui Cave contains rich underground brooks and karst landforms, offering im-portant evidence tourism development and scientific research. Yinshui Cave gets its name from two streams hidden in the cave. Caves are normal in mountains but rare in river ways. Yinshui Cave has pure stalactites, with few air-slaked. It has a large number of vividly modeled sculptures, such as the “carp leaping through the dragon’s gate”, "divine boot falling from heaven”, “jade hare watches peaches”, “ancient bell in Hanshan Temple”, “stone lotus born in water”, “swan’s kiss”, “gold and silver waterfalls”, “immortal’s farmland”, “magical pen of Ma Liang”, “flying fox of snow mountain”, “lighting flashes and thunder rumbles”, and “Eight Immortals see a visitor out.” Yinshui Cave sights integrate the aesthetic beauty of nature in form, dynamics, color, sound and obscurity. Tourists may visit the cave in a unique way by going on a yacht to experience the mysterious cave and listen to the billows of the underground rivers. They may also take railcars to learn about the distinctive charms of the swiftly changing scenes in the cave. They can also go on foot to per-sonally touch the magical works of na-ture.

Materials Science & EngineeringJournals from Maney Publishing

New for 2014: Materials at High Temperatures

The Materials Science & Engineering Collection is a portfolio of highly regarded, peer-reviewed journals providing both general and topical coverage of materials science and engineering. Original papers and reviews report fundamental and applied research on topics from functional materials for electronics/photonics, energy and biomedicine to fabrication, processing and characterisation of materials to design,properties and performance. Our growing list in geotechnical engineering, water science and technologyand transportation reflects an increasing specialisation in engineering.

Materials at High Temperatures welcomes contributions relating to high temperature applications in the power, chemical engineering, processing, and furnace industries. The effectsof high temperatures and extreme environments on corrosion, fatigue, creep, strength and wear in composites, alloys, ceramics, intermetallics and refractories are covered. The journal has a policyof emphasising practical aspects and authors presenting results from research programmes areencouraged to relate these, if possible, to actual or potential applications. The needs of designersand engineers that could be met by future research work are also highlighted.

Find out more about this journal online: www.maneyonline.com/mht

More journals from Maney

Free Trials RecommendAll of our journals are available to trial online completelyfree. This is available to individuals for up to 30 days andlibraries for up to 3 months. Visit the free trials page tosign up for your trial: www.maneyonline.com/freetrial

If a subscription to one of our journals would be beneficial to your library you can recommend the journalto them online. Complete our online form and we’ll emailyour librarian on your behalf: www.maneyonline.com/recommend

www.maneyonline.com/matscieng

24

Bimonthly

SCI Journal

Open Access

Materials Science

Engineering Science

Website: www.niscair.res.in

cmse 2013 conference guide - cmseconf.org conference guide.pdfdr beniwal’s research interests are:...

Documents