cms floorbox products v2

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com


TABLE OF CONTENTS

Page 1 - Table of contents

Page 1a1 - CMS Apollo FL Flush Stainless Steel

Page 1a2 - FL Flush SS compartment sizes

a - CMS Apollo FL Recessed Series

Page 3b - FL Floorbox compartment sizes

Page 4c - FL Floorbox dimensions

Page 5c - CLR Accessory plates

Page 6 - CLR Accessory plates

Page 7a - CLR Accessory plates

Page 7a1 - Apollo FB Floorbox

Page 7a2 - Apollo FB2 & FB4

Page 7a3 - Apollo Accessory plates

Page 7a5 - Apollo Accessory plates

Page 8 - Cablelink Rapide Extra Introduction

Page 9 - Cableink Rapide Extra

Page 10 - Cablelink Rapide Extra dimensions

Page 13 - GES2 Floorbox

Page 14b - GESRM2 Floorbox

Page 15 - Cablelink 1 Floorbox

Page 15a1 - BR1 Floorbox

Page 15a2 - Madera Floorbox

Page 16a - Stainless Steel Floorbox

Page 16a1 - Rhino Floorbox

Page 16a2 - Rhino dimensions

Page 16a4 - Apollo FL Stainless Steel Floorbox

Page 16a.5 - Apollo FL Stainless Steel FLSS2 &

FLSS4

Page 16b5 - Titan Floorbox Intro

Page 16a6 - Titan FTA2 Access box

Page 16a7 - Titan FT2 Inscreed box

Page 16a8 - Titan FT4 Inscreed box

Page 16a9 - Titan FT4 Inscreed Accessories

1

Page 16a10 - Titan FTA4 Access box

Page 16a11 - Titan FTA4 Accessories

Page 16b12 - Titan FTA4 Low profile Inscreed box

Page 16a13 - Titan Low profile Inscreed Accessories

Page 16b14 - Titan FTA4 Low profile Access box

Page 16a15 - Titan Low profile Access Accessories

Page 17a2 - CMS Stainless Steel 3 Phase Floorbox

Page 17a - G1 & G2 Outlet

Page 18 - Access Grommet


1a1

CMS APOLLO FL FLUSH STAINLESS STEEL SERIES

The CMS Apollo FL Flush stainless steel series floorbox

has been designed for maximum flexibility to suit client

requirements, with standard off the shelf component

catering for most applications. Incorporated in the

bevelled lid is an easy grab lifting handle and cable exit

cap.

The carcass and mounting plate are constructed from

powder coated steel producing a long lasting robust unit.

Behind our communication mounting plates is a 50mm

cavity catering for popular AV and communication

requirements.

SOME OF THE FEATURES INCLUDE:

- Available in 2, 3 & 4 compartment

- Easy grab lifting handle

- Multiple cable entry points

- Bevelled lid with a thickness of 4mm

- Increased capacity for AV & Data

2 compartment shown with flush mount lid

ORDERING INFORMATION

PART NO DESCRIPTION

FLF2080SS 2 Compartment stainless steel floor box with flush mount lid - 80mm deep









REFER TO PAGES 5,6 & 7 FOR MOUNTING PLATES

21.1.14


1a2

2 COMPARTMENT

DEPTH PART NO

80mm FLF2080SS

90mm FLF2090SS

120mm FLF2120SS

4 COMPARTMENT

DEPTH PART NO

80mm FLF4080SS

90mm FLF4090SS

120mm FLF4120SS

CUT OUT SIZES:

- 2 COMPARTMENT - 210mm x 210mm



Multiple cable

entry points

Easy grab

lifting handle

3 COMPARTMENT

DEPTH PART NO

80mm FLF3080SS

90mm FLF3090SS

120mm FLF3120SS

210mm 210mm

345mm 225mm

261mm 210mm

21.1.14


CMS APOLLO FL RECESSED SERIES

2a

The CMS Apollo FL Series floorbox has been designed for

maximum flexibility to suit client requirements, with

standard off the shelf component catering for most

applications. Incorporated in the lid is an easy grab lifting

handle and an oversized cable exit cap. The oversize exit

cap ensures all cords exiting are contained within.

A bevelled edge carpet frame and 7mm carpet recessed lid

are moulded from hard wearing, high impact poly

carbonate / ABS blend polyimide with a 2.5mm galvanised

steel plate fitted into the lid, making this one of the

toughest boxes yet. The carcass and mounting plate are

constructed from powder coated steel, producing a long

lasting robust unit.

Multi directional lid comes as standard in soft grey with

other colours available on request (MOQ apply). Behind our

communication mounting plates is a 50mm cavity catering

for popular AV and communication requirements.



- Extra large cable exit flap





3b

2 COMPARTMENT

DEPTH PART NO

80mm FL2080**

90mm FL2090**

120mm FL2120**

4 COMPARTMENT

DEPTH PART NO

80mm FL4080**

90mm FL4090**

120mm FL4120**

CUT OUT SIZES:




Notes: **Denotes lid colour in GY (grey) or BK (black)

3 COMPARTMENT

DEPTH PART NO

80mm FL3080**

90mm FL3090**

120mm FL3120**


4c

2 COMPARTMENT

PART NO OVERALL DEPTH

FL2080** 80mm

FL2090** 90mm

FL2120** 120mm

4 COMPARTMENT


FL4080** 80mm

FL4090** 90mm

FL4120** 120mm

Extra large cable exit flab

Large easy grab Lifting handle

Multiple cable

entry points

3 COMPARTMENT


FL3080** 80mm

FL3090** 90mm

FL3120** 120mm

2 Compartment

3 Compartment

4 Compartment



PART NO. DESCRIPTION

CL11371 M/Plate F/W 3 x 10amp Switched GPOs (only for 120mm deep box)



CL21201 M/Plate F/W 4 x Switch mech. bezels









CL18261 M/Plate f/W 2 x Auto switched GPOs

5c



CL11261 M/Plate f/W 2 x 10amp switched GPOs



CL18371 Mounting plate fitted with 3 x 50mm 10amp Auto Switched GPO - Hardwired

20.1.14




CL31201 M/Plate angle blank



CL11261 –R M/Plate F/W 2 x Round earth pin GPOs

6



CLTAG/1 M/Plate C/W 1 x TAG softwiring coupler



CL30201 M/Plate flat blank



CL24504BB M/Plate F/W 4 x Switch angled mech. bezels



CLTAG/2 M/Plate C/W 2 x TAG softwiring coupler




CL181206 Mounting plate fitted with 3 x 50mm dual data plates - SW18

Series



CL18AV Mounting plate with provision for SW18 Series AV outlets

7a



FBHNDL** Replacement Apollo FL Floorbox handle kit


CMS APOLLO FB FLOORBOX

The CMS Apollo floorbox has been designed for maximum

flexibility to suit client requirements, with standard off the

shelf component catering for most applications.

Incorporated in the lid is an easy grab lifting handle and an

oversized cable exit cap. The oversize exit cap ensures all

cords exiting are contained within.

A bevelled edge carpet frame and 7mm carpet recessed lid

are moulded in hard wearing, high impact poly carbonate /

ABS blend polyimide with a 2.5mm galvanised steel plate

fitted into the lid makes this one of the toughest boxes yet.

The carcass and mounting plate are constructed from

powder coated steel producing a long lasting robust unit.

Multi directional lid comes as standard in soft grey with

other colours available on request (MOQ apply).



requirements.


- Available in 2 & 4 compartment

- Extra large cable exit flap




- 50mm deep data cable cavity

7a1


APOLLO FB2 COMPARTMENT

DEPTH PART NO

60mm FB260

80mm FB280

100mm FB210

CUT OUT SIZES:

- FB2 FLOORBOX - 210mm x 210mm

- FB4 FLOORBOX - 345mm x 225mm

APOLLO FB4 COMPARTMENT

DEPTH PART NO

60mm FB460

80mm FB480

100mm FB410

Large easy grab

lifting handle

Extra large

cable exit flab

Multiple cable

entry points

7a2


3 x 10amp GPO shown

4 x Data shown

ORDERING INFORMATION - 2 COMPARTMENT GPO MOUNTING PLATE & STARTER SOCKETS

DESCRIPTION 60 DEEP 80 DEEP 100 DEEP

M/Plate with 2 x 10amp auto switch GPO FBP2602 FBP2802 FBP2102


M/Plate with single starter FBP260ST1 FBP280ST1 FBP210ST1

M/Plate with double starter FBP260ST2 FBP280ST2 FBP210ST2

4 x 10amp GPO shown

ORDERING INFORMATION - 4 COMPARTMENT GPO MOUNTING PLATE & STARTER SOCKETS




M/Plate with single starter FBP460ST1 FBP480ST1 FBP410ST1

M/Plate with double starter FBP460ST2 FBP480ST2 FBP410ST2

M/Plate with single starter & 2 x 10amp auto switch GPO FBP460SP FBP480SP FBP410SP

ORDERING INFORMATION - 2 COMPARTMENT DATA MOUNTING PLATE & AV


M/Plate with provision for 2 x Data FBD2602 FBD2802 FBD2102


M/Plate with provision for 6 x Data ——————- FBD2806 FBD2106

Blank mounting plate 150mm x 41.5mm opening ——————- FBD280150 FBD210150

2 Comp AAP Plate - provision only FBD260AA FBD280AA FBD210AA

7a3


4 x Data shown

ORDERING INFORMATION - 4 COMPARTMENT DATA MOUNTING PLATE & AV





Blank mounting plate 300 x 41.5mm opening ————— FBD480300 FBD410300

4 Comp dual AAP plate - provision only FBD460AA FBD480AA FBD410AA

PRECONFIGURED ORDERING INFORMATION


FB26034 FB2 Module floorbox c/w: 3 x auto switch GPO, 4 x Data cut-outs for 60mm








FBHNDL** Replacement Apollo FB floorbox handle kit

** Denotes black (BK) or grey (GY)

7a5


Ackermann revolutionised the floor box concept with the introduction of the first fast

fit floor box, the Cablelink Rapide. Further development has resulted in the Cablelink

Rapide Extra, Ackermann’s new fast fit floorbox that offers you more.

CABLELINK RAPIDE EXTRA

Retaining all the popular features of Cablelink Rapide,

Rapide Extra has been engineered for easier and faster

installation, maximum life span flexibility and offers a host of new

features and options.

The design allows for the complete box and/or individual

modules to be easily installed and removed. The robust one

piece, one size moulded frame, offers the option of future

proofing with the easy addition of a fourth module at a later date.

New optional extras such as cable retainers, cable dump and

lockable lid make Rapide Extra the ultimate cost effective

interface between underfloor services and the office environment.

RAPIDE INSTALLATION & REMOVAL

Still one of the fastest floor boxes to install, Rapide Extra’s

no tools fixing and unique patented spring loaded blade

mechanism significantly reduces installation time and

costs.

As well as being one of the fastest and easiest floorboxes

on the market to install, the unique design of Rapide Extra

means that it is also one of the fastest and easiest to

remove from the floor.

For example, during initial installation, the floor box may

have to be removed from the floor tile a number of times to

accommodate various trades and services work. This,

together with maintenance and relocation to accommodate

changes in office layout, is made simpler by Rapide Extra’s

unique features. The one piece floor box frame and

patented spring loaded blade system means there is no

unscrewing, dismantling or levering required. Simply retract

the blades and lift the complete box from the floor, saving

time and reducing costs.

REVERSABLE LID

Rapide Extra’s quick release, reversible lid mechanism

ensures easy removal. Its reversibility accommodates

cables from any direction, thus removing excessive strain

on incoming cables.

TAMPER PROOF LOCK

Rapide Extra comes with additional features such as a

lockable lid option. This tamper proof feature provides

extra security against the accidental disconnection of

services or unauthorised use.

CABLE DUMP

This new innovation from Ackermann enables excess

cabling to be stored safely away within the floor box.

8


RAPIDE EXTRA 4 COMPARTMENT

PART NO

CRX4080GRY 4 x Compartment floor outlet - 80mm deep



CRXKEY Key for floorbox

CABLELINK RAPIDE EXTRA

FUTURE PROOFING

Rapide Extra not only provides flexibility in its installation,

but also in its capacity to accommodate future expansion.

The ever increasing proliferation in data requirements or the

integration of special power needs an option

for increased capacity within the cable management

infrastructure. Rapide Extra’s one size floor box frame offers

an expansion capacity, from a 3 module to a 4 module box,

at a significantly reduced cost compared to traditional

methods.

Included with every 3 module box is a moulded expansion

plate, which provides neat closure until the fourth module

position is required. When needed simply remove the

moulded expansion plate and install a new module.

ADD AND REMOVE MODULES WITHOUT REMOVING BOX

Ackermann’s original innovation of floor boxes constructed

from individual modules has set the standard for ease of

installation and flexibility. Ackermann’s latest development

in modularity enables modules to be installed and removed

without dismantling or removing the floor box frame.

Rapide Extra’s unique method of fixing the individual

modules to the floor box frame affords the option of lift up

or drop-down installation and removal of individual modules

whilst the floor box frame remains in the floor. This unique

feature means that installation, retro fitting and the removal

of modules can be carried out with minimum disruption and at

greatly reduced cost.

CABLE RETAINERS

Cable retainers are also available as an option. Supplied pre

-fitted or as retro fit items depending on the floor box build,

cable retainers assist in the routing of incoming cables

through the cord caps and reduce the risk of damage to the

cables.


- No need to install a larger floorbox

- No need to disrupt or move existing services

- Built in future proofing at no extra cost

- Lockable lid option for added security

- Cable dump reduces trip hazards

- Cable retainers for tidier and safer work environment

9a


2 COMPARTMENT

PART NO OVERALL DEPTH PLUG TOP

CLEARANCE (B)

CRX4080GRY 80mm 25.5

CRX4090GRY 90mm 35.5

CRX4120GRY 120mm 65.5

CABLELINK RAPIDE EXTRA DIMENSIONS

(80, 90 or

120mm)

CUT OUT SIZES:


10


GES2 SERIES

The GES 2 is a brilliantly simple concept in floor outlet

from CMS. Small and discreet when you need it to be, or

the centre of attention in stainless steel when you want it

to be.

This floor outlet is suited to every floor type, the standard

model coming complete with a recessed lid to allow the

easy installation of a matching floor covering. The GES 2

will provide two GPOs wherever they are required.

This box has two compartments and will accept any two

of the mounting plates listed in the below.

TECHNICAL SPECIFICATIONS:

- CARPET RECESS - 5mm

- TILE FRAME - Polymide

- ACCESSORY BOX - Plated steel, 4 x 25mm knockouts

CUT OUT DIMENSIONS:

- 2 COMPARTMENT - 188mm x 112mm x 70mm

- STAINLESS STEEL - 188mm x 112mm x 90mm



GES2 BLK 2 Compartment floor outlet (black) - 70mm deep

GES2GRY 2 Compartment floor outlet (grey) - 70mm deep

GES2/SS 2 Compartment floor outlet (stainless steel) - 90mm deep

GES/PWR M/Plate F/W 1 x 10 Amp GPO

GES/BEZ M/Plate F/W 2 x switch mech. bezels

GES/PWR-R M/Plate F/W round earth pin GPO

CONTACT STAFF FOR ALTERNATE CONFIGURATIONS

13


GESRM2 SERIES

A simple solution just got clever. The GESRM2 floor outlet box is

designed for use in screed, cavity and raised floor applications.

When not in use it is dust and water resistant to IP65. It is ideal for

P.V.C and tiled internal floors that need wet cleaning. The unit can

be fitted with one general purpose power outlet, two RJ45 data /

telephone outlets, or one auto switched power outlet and two

RJ45 data / telephone outlets. The GESRM2 is also available as a

directional spotlight.

The IP65 rated lid section is manufactured from die cast zinc

non-slip surfacing. Surfaces available are: stock nickel and aged

brass.

The undercarriage is manufactured from 1.2mm galvanized steel.


- PROTECTION - IP65 when closed

CUT OUT DIMENSIONS:

- GESRM2 - 115mm

- DEPTH - 100mm



GESRM2A/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim & 1 x 10amp GPO

GESRM2B/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim, 1 x 10amp GPO and provision for 2 x

data / telephone

GESRM2D/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim and provision for 2 x data / telephone

GESRM2A/CT/BR IP65 rated Floorbox with non-slip brass finish, carpet trim & 1 x 10amp GPO

GESRM2B/CT/BR IP65 rated Floorbox with non-slip brass finish, carpet trim, 1 x 10amp GPO and provision for 2 x da-

ta / telephone

GESRM2D/CT/BR IP65 rated Floorbox with non-slip brass finish, carpet trim and provision for 2 x data / telephone

GESRM2A/BE/NI IP65 rated Floorbox with non-slip nickel finish, butted edge lid & 1 x 10amp GPO

GESRM2B/BE/NI IP65 rated Floorbox with non-slip nickel finish, butted edge lid, 1 x 10amp GPO and provision for 2 x

data / telephone

GESRM2D/BE/NI IP65 rated Floorbox with non-slip nickel finish, butted edge lid and provision for 2 x data / telephone

GESRM2A/BE/BR IP65 rated Floorbox with non-slip brass finish, butted edge lid & 1 x 10amp GPO

GESRM2B/BE/BR IP65 rated Floorbox with non-slip brass finish, butted edge lid, 1 x 10amp GPO and provision for 2 x

data / telephone

GESRM2F/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim & 1 x 20amp GPO

GESRM/2APWR Single switched GPO mounting plate for A style box outlet included

GESRM/2BPWR Single auto switched GPO mounting plate for B style box outlet included

DBLV/5E** Leviton data jack - Cat 5E

DBLV/6** Leviton data jack - Cat 6


14b 15.7.14


CABLELINK 1



CL1075BLK Single application floor outlet complete with lid and entry holes

CL49094A CL1 mounting plate fitted with 1 x 10amp GPO

CL49094A15 CL1 mounting plate fitted with 1 x 15amp GPO

CL49094A20 CL1 mounting plate fitted with 1 x 20amp GPO

CL49094AR CL1 mounting plate fitted with round earth pin

CL49094B CL1 mounting plate - blank

CL49094C CL1 mounting plate fitted with 1 x switch mech. bezel

CL49094D CL1 mounting plate fitted with 2 x switch mech. bezel

30247A CL1 Non– slip nickel flat lid (optional)

30247B CL1 Brass non-slip flat lid (optional)

30721AA CL1 tool for flat stainless steel and brass lids


The CL1 is where it all began, the original floor outlet from CMS. A

unique compact circular floor outlet box. The CL1 is designed for

use in all types of floors. It is ideally suited for providing a single

power, data or telephone outlet where and when required. It is

supplied standard with a hinged, robust plastic dome lid. The

options of a non-slip Nickel finish, non-slip brass and plastic flush

floor lids are available for when the floor outlet is not in use. The

original simple solution from CMS.

HINGED DOME LID

Manufactured from polyamide. An extremely tough fire retardant

material. OUTLET MOUNTING PLATE

CMS outlet (10, 15 or 20 Amp) can be easily mounted for power

requirements. For data and telephone a bezel is inserted in the

mounting plate, so RJ series connectors and TV points can easily

snap in. OUTLET BODY

Zinc alloy pressure die-cast body with internal and external

threads which allows different mounting plates and accessories

to be installed, as well as providing simple means of installation. CONDUIT MOUNTING BOX

Available so the outlet can be installed in a preformed concrete

slab. CUT OUT DIMENSIONS:

- CABLELINK 1 - 92mm

- DEPTH - 75mm

15


BR1 SERIES

The BR1 floor outlet box is designed for use in screed,

polished concrete floor applications. When not in use it is

dust and water resistant up to IP65. The unit is fitted with

one general purpose power outlet, one RJ45 data / tele-

phone outlet.

This unit comes as standard with a brass lid for when the

box is not in use & a dome lid for when in use. It is also

height adjustable and is ideal in wet clean floor applications.

The IP65 rated lid section is manufactured from brass,

whilst the undercarriage is manufactured from 1.2mm

plated steel.


- PROTECTION - IP65 when closed

CUT OUT DIMENSIONS:

- BRI - 122mm

- DEPTH - 84mm



BR1

IP65 rated butted edge floorbox standard with brass lid, plastic dome lid , 1 x 10amp GPO and

provision for 1 x data / telephone

DBLV/5E** Leviton data jack - Cat 5E

DBLV/6** Leviton data jack - Cat 6

30721AA Tool for flat stainless steel and brass lids


Dome lid shown

IP65 Brass lid shown

Note: When in use the dome lid is required for correct cable exit & socket outlet protection

15a1


MADERA FLOORBOX SERIES

The stylish new Madera floor outlet box is designed for use

in timber floor applications. The unit is fitted with one gen-

eral purpose power outlet complete with dust cover.

The Madera floor outlet is well suited for the high end

residential or commercial applications when concealing a

single outlet in a timber floor.

This unit comes with an option of a flanged brass lid or a

butted edge version if a flush finish is desirable.

CUT OUT DIMENSIONS:

- BUTTED EDGE - 105mm Hole saws

- BUTTED EDGE REBATE: 111mm hole saw 2mm deep

- BUTTED EDGE DEPTH - 106mm

- FLANGED EDGE - 105mm Hole saws

- FLANGED EDGE DEPTH - 105.9mm

Flush lid shown

Flanged brass lid shown

15a2

Note: Outlet to be covered at all times.



MD01CT Madera floorbox with flanged lid c/w 1 x 10amp auto switched GPO

MD01BE Madera floorbox with butted edge lid for flush mount c/w 1 x 10amp auto switched GPO


STAINLESS STEEL FLOOR OUTLETS



CL2075SS 2 Compartment floor outlet

CL4075SS 4 Compartment floor outlet

CL11261-65 Mounting plate with 2 x GPOs

CL21201-65 Mounting plate with 4x switch mech. bezels

CL11371-65 Mounting plate with 3 x 10amp GPOs


The stainless steel floor outlets are easily installed into a

concrete or timber floor. The clever design allows

adjustment of the lid for height after being cast in screed.

The undercarriage is made from 1.2mm galvanized steel and has

4 x 20mm knockouts for conduit.


- This floorbox is available as a 2 or 4 compartment

- 4 x 20mm knockouts for conduit

- Each compartment can accommodate 2 x GPO or 4 x Data/Voice

- Stainless steel finish

CUT OUT DIMENSIONS:


CUT OUT DIMENSIONS:


CL4075SS

CL2075SS

16a

CL11261-65 Shown

CL11371-65 Shown

CL21201-65 Shown


RHINO FLOORBOX

16a1

The Rhino stainless steel floor outlet boxes are easily

installed into a concrete or timber floor.

The Rhino floor box flush mount lid is manufactured from

5mm stainless steel and is suitable in applications requiring

additional strength to take the weight of a vehicle.


- Multiple knockouts for conduit


- 3 Standard depths 80mm, 90mm or 120mm

CUT OUT SIZES:

- RF2 COMPARTMENT - 210mm x 210mm

- RF4 COMPARTMENT - 345mm x 225mm


PART NO DESCRIPTION

RF2080SS 2 Compartment stainless steel floor box with flush mounted lid - 80mm deep







2 Compartment shown

4 Compartment shown

NOTE:

- Contact CMS technical sales team to confirm suitability of this product for a specific application


16a2

2 COMPARTMENT


RF2080SS 80mm

RF2090SS 90mm

RF2120SS 120mm

4 COMPARTMENT


RF4080SS 80mm

RF4090SS 90mm

RF4120SS 120mm

Extra large cable exit flab

Multiple cable

entry points

CUT OUT SIZES:



210 210


16a4

CMS APOLLO FL STAINLESS STEEL SERIES

4 compartment shown with Power, Data & 20amp starter socket


PART NO DESCRIPTION

FL2080SS 2 Compartment stainless steel floor box with recessed d - 80mm deep

FL2090SS 2 Compartment stainless steel floor box with recessed lid - 90mm deep









The CMS Apollo FL stainless steel series floorbox has been

designed for maximum flexibility to suit client requirements,

with standard off the shelf component catering for most

applications. Incorporated in the lid is an easy grab lifting

handle and cable exit cap.

Incorporated into the stainless steel lid and carpet frame is

a 12mm recess to accommodate the floor finish. The

carcass and mounting plate are constructed from powder

coated steel producing a long lasting robust unit.



requirements.







16a.5

2 COMPARTMENT

DEPTH PART NO

80mm FL2080SS

90mm FL2090SS

120mm FL2120SS

4 COMPARTMENT

DEPTH PART NO

80mm FL4080SS

90mm FL4090SS

120mm FL4120SS

CUT OUT SIZES: - 2 COMPARTMENT - 210mm x 210mm



3a

Multiple cable

entry points

Easy grab lifting handle

3 COMPARTMENT

DEPTH PART NO

80mm FL3080SS

90mm FL3090SS

120mm FL3120SS


16b5

CMS TITAN FLOORBOX

Lid closed Lid with optional umbilical Screed box

Access floorbox shown with AV plates fitted

The CMS Titan floorbox has been designed for maximum

flexibility incorporating power, data and AV to suit client

requirements.

The Titan floorbox provides services directly to workstations,

conference, meeting, and training rooms suitable for concrete

or computer access floor applications.

The Titan floorbox has interchangeable face plate to

incorporate power and specific brands of data and audio visual

components.

The lid incorporates an easy grab lifting handle and an

oversized cable exit cap.

A bevelled edge carpet frame and 7mm carpet/tile recessed

lid is moulded in hard wearing, high impact, polycarbonate /

ABS blend Polymide with a 2.5mm steel plate fitted for extra

strength.


- Available in two sizes

- Interchangeable plates

- Branded AV solutions (Extron, Kramer)


- High impact lid with 7mm recess

- Concrete or Access floor applications


16a6

1

FTA2 ACCESS BOX - EXPLODED VIEW

2

3

5

7

8

9

10

11

12

13

6

14

SERIESSERIESSERIESSERIES CUT OUTCUT OUTCUT OUTCUT OUT

FTA2 210mm x 210mm

4

ACCESSORY ORDERING INFORMATION

ID No. PART NO. DESCRIPTION

1 FTA2 FTA2 Access floorbox, lid & undercarriage assembly - 95mm deep

2 FT2LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet

3 FTD4 Adapter plate to suit 2 x 50mm Dual tile (provision 4 x data)

4 FTD2 Adapter plate to suit 2 x 50mm Single tile (provision 2 x data)

5 FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black

6 FTAPH2BK Power plate f/w 2 auto switched GPO with back box

7 FTSCD SC Duplex plate

8 FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules

9 FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double

10 FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules

11 FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules

12 FTEXMAAP4 Titan Floor box MAAP Extron adapter plate quad

13 FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules

14 FTBP Blank plate


16a7

1

FT2 INSCREED BOX - EXPLODED VIEW

2

3

5

7

8

9

10

11

12

13

6

15

SERIES CUT OUT

FT2CH 332mm x 332mm

4

ACCESSORY ORDERING INFORMATION

ID No. PART NO. DESCRIPTION

1 FT2CH Titan FT2 Screed box 100mm deep

2 FT2TP Titan FT2 Screed Floorbox, lid & undercarriage assembly 95mm deep



5 FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black

6 FTP2BK Titan power plate f/w 2 auto switched GPO - black

7 FTSCD SC Duplex plate

8 FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules

9 FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double

10 FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules

11 FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules

12 FTEXMAAP4 Titan Floor box MAAP Extron adapter plate quad

13 FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules

14 FTBP Blank plate

15 FT2LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet

14


16a8

FT4 INSCREED BOX - EXPLODED VIEW

ID NO. PART NO. ID NO. PART NO.

1 FT4CH - Titan FB4 Screed Box 100mm deep to suit FT4TP

12 FTKRSV - Kramer adapter plate to suit 'SV' xx Modules

2 FT4TP - FB4 floorbox, lid & undercarriage assembly 13 FTEXMAAP4 - MAAP Extron adapter plate quad

3 FTBP - Blank plate 14 FTKRW4 - Kramer adapter plate to suit 'W' xx quad

modules

4 FTP2 - Power plate f/w 2 auto switched GPO 15 FT1802L3HBK - Dual auto switched power module c/w

L3HBK

5 FTTAGBK - single starter full plate c/w rewireable socket

- black

16 FT1804L3HBK - Quad auto switched power module c/w

L3HBK

6 FTD4 - Adapter plate to suit 2 x 50mm Dual tiles (4 x

data)

17 FTTAG+BK - Starter plate c/w rewireable socket (with

opening to suit adjacent cut-out) - black

7 FTD2 - Adapter plate to suit 2 x 50mm Single tiles (2 x

data)

18 FTKRWD2 - Kramer adapter plate to suit 'W' xx Double

modules

8 SW18C2 - 50mm dual data tile 19 FTEXMAAPD2 - Titan Floor box MAAP Extron adapter

plate double

9 SW18B1 - 25mm single data tile 20 FTSCD - SC Duplex plate

10 SW18B1SM - 25mm single plate to suit Systimax data tile 21 FT4LID-UMB - Floorbox lid with galvanised steel lid insert

and umbilical grommet

11 FTEXAAP - AAP Extron adapter plate to suit 1 x Double

or 2 x single modules

21

17

5

18

19

20

6

5

3

7

4

2

1

15

16

13

14

12

11


16a9

FT4 INSCREED ACCESSORY ORDERING INFORMATION


FT4CH Titan FT4 Screed Box 100mm deep to suit FT4TP

FT4TP FT4 floorbox, lid & undercarriage assembly

FT4LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet

FTP2BK Titan power plate f/w 2 auto switched GPO - black

FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules

FTEXMAAP4 Titan Floor box MAAP Extron adapter plate s quad

FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double

FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules

FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules

FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules

FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black

FTTAGBK Titan Floor box single starter full plate c/w rewireable socket - black

FTTAG2BK Titan Floor box dual starter full plate c/w rewireable sockets - black

FTD4 Adapter plate to suit 2 x 50mm Dual tiles (4 x data)

FTD2 Adapter plate to suit 2 x 50mm Single tiles (2 x data)

FTBP Blank plate

FTSCD SC Duplex plate

FTD2C1BK Double data kit (to suit whole Titan range)

FTD4C1BK Quad data kit (to suit whole Titan range)

FTD6C2CBK 6 Way data kit (to suit whole Titan range)

FTD8C2BK 8 Way data kit (to suit whole Titan range)

FT1802L3HBK Dual auto switched power module including L3HBK rewireable coupler to suit FT4TP series

FT1804L3HBK Quad auto switched power module including L3HBK rewireable coupler to suit FT4TP SERIES


16a10


1 FTA4 Access floorbox, lid & undercarriage assembly -

95mm deep 11 FTKRSV - Kramer adapter plate to suit 'SV' xx Modules

2 FTBP - Blank plate 12 FTEXMAAP4 - MAAP Extron adapter plate quad

3 FTAPH2BK - Power plate f/w 2 auto switched GPO with

back box

13 FTKRW4 - Kramer adapter plate to suit 'W' xx quad

modules

4 FTTAGBK - single starter full plate c/w rewireable socket

- black

14 FTA1802L3BK - Dual auto switched power module c/w

L3.20 rewire

5 FTD4 - Adapter plate to suit 2 x 50mm Dual tiles (4 x

data)

15 FTA1804L3BK - Quad auto switched power module c/w

L3.20 rewire

6 FTD2 - Adapter plate to suit 2 x 50mm Single tiles (2 x

data)

16 FTTAG+BK - FTTAG+BK - Starter plate c/w rewireable

socket (with opening to suit adjacent cut-out) - black

7 SW18C2 - 50mm dual data tile 17 FTKRWD2 - Kramer adapter plate to suit 'W' xx Double

modules

8 SW18B1 - 25mm single data tile 18 FTEXMAAPD2 - Titan Floor box MAAP Extron adapter plate

double

9 SW18B1SM - 25mm single plate to suit Systimax data

tile

19 FTSCD - SC Duplex plate

10 FTEXAAP - AAP Extron adapter plate to suit 1 x Double


20 FT4LID-UMB - Floorbox lid with galvanised steel lid insert


FTA4 ACCESS BOX - EXPLODED VIEW

SERIES CUT OUT

FTA4 345mm x 225mm

13

14

16

15

17

18

19

4

12

11

2

10

6

5

4

3

1

20


16a11

FTA4 ACCESS BOX ACCESSORY ORDERING INFORMATION


FTA4 Titan FB4 Access floorbox lid & undercarriage assembly (cut out 345mm x 225mm) 95mm deep


FTAPH2BK Titan power plate f/w 2 auto switched GPO with back box

FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules

FTEXMAAP4 Titan Floor box MAAP Extron adapter plate quad

FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double

FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules

FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules

FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules

FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black

FTTAGBK Titan Floor box single starter full plate c/w rewireable socket - black

FTTAG2BK Titan Floor box dual starter full plate c/w rewireable sockets - black

FTD4 Adapter plate to suit 2 x 50mm Dual tiles (4 x data)

FTD2 Adapter plate to suit 2 x 50mm Single tiles (2 x data)

FTBP Blank plate

FTSCD SC Duplex plate





FTA1802L3BK Double GPO kit including L3.20rewireable coupler to suit FTA4 series

FTA1804L3BK Quad GPO kit including L3.20 rewireable coupler to suit FTA4 series


16b12

21


1 FT4CH80 - Titan FB4 Screed Box low profile c/w segre-

gation & cover plate - 80mm deep to suit FT4TP 13 FT1804L3HBK - Quad auto switched power module c/

w L3HBK

2 FT4TP75 - FB4 floorbox, lid & undercarriage - 75mm

deep

14 FTLPEX2AAP - AAP Extron plate to suit 2 x doubles or

4 x single modules

3 FT4LID-UMB - Floorbox lid with galvanised steel lid

insert and umbilical grommet

15 SW18C2 - 50mm dual data tile

4 FTLPTAGBK - Low profile starter full plate c/w single

rewireable socket

16 SW18B1 - 25mm single data tile

5 FTLPKRWD - Kramer Adaptor Plate to suit Double mod-

ules

17 SW18BH - 25mm Data tile f/w HDMI connector

6 FTLPKRW2 ---- Kramer adapter plate to suit ‘W’ xx double

modules

18 SW18BUSB - 25mm Data tile f/w 2 x USB ports

7 FTLPSCD - SC Duplex plate adaptor plate to suit 75mm

deep box

19 SW18B1SM - 25mm single tile to suit Systimax data

8 FTLPKRSV - Kramer adapter plate to suit SV301 or

SV306

20 SW18CV - 50mm tile f/w VGA H/D DB15 socket &

screw termination

9 FTLPEXMAAPD - Titan floorbox MAAP Extron adapter

plate double

21 FTDLP4BK - Titan low profile data plate f/w 2 x 50mm

double data provision tiles - black

10 FTLPEXMAAP2 - Titan floorbox MAAP Extron plate sin-

gle


single data provision tiles - black

11 FTLPEXAAP - AAP Extron adapter plate to suit 1 x

double or 2 x singles

23 FTLPBPBK- Titan low profile blank plate f/w 2 x 50mm

blank data tiles - black

12 FTLPD3/25BK - 100mm blank plate ————————————————————————————————————————————————————————————————————————————————————————————————

FT4 LOW PROFILE INSCREED BOX - EXPLODED VIEW

SERIES CUT OUT

FTL4CH 432mm x 332mm

13

14

19

18

17

16

15

20

22

23

1

4

5

6

7

8

9

10

11

12

3

2


16a13

LOW PROFILE INSCREED ACCESSORY ORDERING INFORMATION


FT4CH80 Titan FT4 Screed Box low profile c/w segregation & cover plate - 80mm deep to suit FT4TP

FT4TP75 FT4 floorbox, lid & undercarriage - 75mm deep


FTLPEXMAAPD Titan floorbox MAAP Extron adapter plate double

FTLPEX2AAP AAP Extron plate to suit 2 x Doubles or 4 x single modules

FTLPEXMAAPD2 Titan Floor box MAAP Extron adapter plate single

FTLPEXAAP AAP Extron adapter plate to suit 1 x Double or 2 x Singles

FTLPKRW2 Kramer adapter plate to suit ‘W’ xx double modules

FTLPKRWD Kramer adaptor plate to suit Double modules

FTLPKRSV Kramer adapter plate to suit SV301 or SV306

FTLPTAGBK Low profile starter full plate c/w single rewireable socket

FTLPD3/25BK 100mm Blank Plate

FTLPSCD SC Duplex plate adaptor plate to suit 75mm deep box


FTLPBPBK Titan low profile blank plate f/w 2 x 50mm blank data tiles - black

FTDLP2BK Titan low profile data plate f/w 2 x 50mm single data provision tiles - black

FTDLP4BK Titan low profile data pate f/w 2 x 50mm double data provision tiles - black




FT1802L3HBK Double GPO kit including L3H rewireable coupler to suit FT4TP series

FT1804L3HBK Quad GPO kit including L3H rewireable coupler to suit FT4TP SERIES


16b14

FTA4 LOW PROFILE ACCESS BOX - EXPLODED VIEW

14

13

12

15

17 18


1 FTA4GY75 - FB4 floorbox, lid & undercarriage - 75mm deep 12 FTLPSW1804L3BK - Quad auto switched power

module c/w L3.20

2 FT4LID-UMB - Floorbox lid with galvanised steel lid insert


13 FTLPEX2AAP - AAP Extron plate to suit 2 x Doubles


3 FTLPTAGBK - Low profile starter full plate c/w single

rewireable socket

14 SW18C2 - 50mm dual data tile

4 FTLPKRWD - Kramer Adaptor Plate to suit Double modules 15 SW18B1 - 25mm single data tile

5 FTLPKRW2 ---- Kramer adapter plate to suit ‘W’ xx double

modules

16 SW18BH - 25mm Data tile f/w HDMI connector

6 FTLPSCD - SC Duplex plate adaptor plate to suit 75mm

deep box

17 SW18BUSB - 25mm Data tile f/w 2 x USB ports

7 FTLPKRSV - Kramer adapter plate to suit SV301 or SV306 18 SW18B1SM - 25mm Single tile to suit Systimax data

8 FTLPEXMAAPD - Titan floorbox MAAP Extron adapter plate

double

19 SW18CV - 50mm tile f/w VGA H/D DB15 socket &

screw termination

9 FTLPEXMAAP2 - Titan floorbox MAAP Extron plate single 20 FTLPBPBK- Titan low profile blank plate f/w 2 x

50mm blank data tiles - black

10 FTLPEXAAP - AAP Extron adapter plate to suit 1 x Double or

2 x singles


single data provision tiles - black

11 FTLPD3/25BK - 100mm blank plate 22 FTDLP4BK - Titan low profile data plate f/w 2 x 50mm

double data provision tiles - black

SERIES CUT OUT

FTA4GY75 345mm x 225mm

16

19

20

21 22

1

3

4

5

6

9

7

8

10

11

2


16a15

LOW PROFILE ACCESS ACCESSORY ORDERING INFORMATION


FTA4GY75 FB4 floorbox, lid & undercarriage - 75mm deep


FTLPEXMAAPD Titan floorbox MAAP Extron adapter plate double

FTLPEX2AAP AAP Extron plate to suit 2 x Doubles or 4 x single modules

FTLPEXMAAPD2 Titan Floor box MAAP Extron adapter plate single

FTLPKRW2 Kramer adapter plate to suit ‘W’ xx double modules

FTLPKRWD Kramer adaptor plate to suit Double modules

FTLPEXAAP AAP Extron adapter plate to suit 1 x Double or 2 x Singles

FTLPKRSV Kramer adapter plate to suit SV301 or SV306

FTLPTAGBK Low profile starter full plate c/w single rewireable socket

FTLPD3/25BK 100mm Blank plate

FTLPSCD SC Duplex plate adaptor plate to suit 75mm deep box

FTLPBPBK Titan low profile blank plate f/w 2 x 50mm blank data tiles - black

FTDLP2BK Titan low profile data plate f/w 2 x 50mm single data provision tiles- black

FTDLP4BK Titan low profile data pate f/w 2 x 50mm double data provision tiles - black





FT1802L3BK Double GPO kit including L3.20 rewireable coupler to suit FT4TP series

FT1804L3BK Quad GPO kit including L3.20 rewireable coupler to suit FT4TP SERIES


17a2

CMS Stainless Steel 3 Phase Floorbox

The CMS 3 Phase floorbox has been designed for

applications that require 3 phase outlets mounted in

the floor.

The flush mount lid is manufactured from 5mm

stainless steel and comes with an easy grab lifting

handle and cable exit cap.

The carcass and mounting plates are constructed

from powder coated steel producing a long lasting

robust unit.

Available in 120mm deep only.


- Available space for 3 x Single GPO and 32amp outlet



- Solid 5mm stainless steel lid

- Standard depth 120mm

CUT OUT SIZES:

- 120mm deep 3 Phase - 345mm x 225mm

3 Phase 120mm deep floorbox shown with outlets

Exploded view


PART NO DESCRIPTION

RF4B5120SS CMS Stainless steel lid floorbox c/w 3 x Single hardwired GPOs and provision only for 1 x

32amp 3 Phase outlet - 120mm deep

Notes:

- Provision only for 32amp outlets. . . . Outlets by others.

17.6.14


G1 & G2 OUTLETS



G1 Floor service outlet stainless steel, 2 compartment with removable divider

G2 Floor service outlet stainless steel, 4 compartment with removable divider

G1 MINI Floor service outlet stainless steel, 2 compartment c/w CMS 2 x Single 10amp GPOs

G1-56 Floor service outlet stainless steel, 2 compartment c/w provision for 56 series outlets

C16H.1WT Single 10amp GPO switched, hardwired - White

C16H.2WT Double 10amp GPO switched, hardwired - White


Small and discreet the floor service outlet box is a

simple and cost effective solution in floor mounted outlets

from CMS.

With a smart stainless steel cover there is no need for cut

outs as this floor outlet screws on top of the floor or on the

work surface. The standard 2 compartment G1 and G2 is

designed for the mounting of standard outlets sold

separately.

The newly released G1-Mini comes complete with two CMS

10amp GPOs.


- Floor outlet units available in 2 or 4 compartment

- Easy installation

- Removable dividers

- 25mm cable entry holes


G1 OVERALL DIMENSIONS:


G2 OVERALL DIMENSIONS:


G1-MINI OVERALL DIMENSIONS:


G1-56 OVERALL DIMENSIONS:


17a

G1 Shown


SERVICE ACCESS GROMMET



C1000G 127mm Floor grommet

C100G 80mm Desk/Floor grommet

CMS Electracom also recognises the need for low-cost solutions

that combine innovative design and manufacturing quality.

Cableway 1000 provides an economical solution to the distribution

of power, data and voice services within raised access floors.


- Selection of 1, 2 or 3 cable exits enable varying cable

capacity

- Unique spring clips allow easy and rapid installation

- Utilising all three openings facilitates up to 6 x 20mm

conduits or a combination of 3 x 25mm and 3 x

16mm diameter conduits

CUT OUT DIMENSIONS:

- Grommet - 127mm

CABLEWAY 1000

18

cms floorbox products v2

Documents

ges2 floorbox page

phase floorbox page

b gesrm2 floorbox page

cableink rapide extra

c clr accessory plates

g1 g2 outlet page

compartment easy grab

deep flf2090ss