clock repairs & parts - wall clocks, time systems, clock parts...3-wire synchronous clocks:...

152

The Most Common Corrective Movement

Use this corrective movement on american time®, Simplex®, Cincinnati, Faraday, Lathem and Edwards clocks. It’s guaranteed for one year, in stock and ready to ship the same day you place your order!

See page 159.

How to Read Your Motor Motor Voltage, as indicated by 24vac and 110vac, speed of revolutions (RPM), and frequency (Hz) are critical pieces of information when ordering motors.

When Ordering, specify all the information shown on the side of the motor you're replacing, starting with the voltage and speed of revolutions, followed by the model number.

Help from our advisors is just a phone call away at: 800-328-8996.

110vac 24vac

Clock Repairs & Parts

If you’re a do-it-yourselfer, you came to the right place to order the motors and movements you need to repair your facility’s clocks.

153Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com

7 –

Rep

airs, Movem

ents & P

artsAllSync Plus® Replacement Movement Kits

1YearWARRANTY

Want Us to Repair Your Clocks?You own the clock but it needs one or two new components to get it working. Our Repair Technicians have experience repairing every major brand of clock made as early as the 1920's. If it can be fixed, they'll get it done. Their work is backed with a two-year warranty, which is hard to find on a new clock, much less a repaired clock.

More than 75 percent of our repair customers upgrade their mechanical system clocks to our AllSync Plus® solid-state circuit board movement. Here's why:

Extended Warranty

Energy Savings

Long Lasting

Cost Savings

Our two-year repair warranty is an industry leader.

AllSync Plus uses up to 80 percent less energy than mechanical clocks.

Solid-state circuit board has fewer moving parts to wear out.

Save up to $45 per clock repair.

2YearWARRANTY

energySAVER

energySAVER

SAVEMONEY

$

Our Customers Say It Best

I’ve had good service from American Time for more than 25 years. They have the parts I need for different clock systems all under one roof. I appreciate their stock of hard-to-find parts and that they support time systems no longer supported by the OEM manufacturers.

Craig Larson, Columbia Heights Public Schools

ASKIT01-J19 for Lathem, National, AmericanASKIT02-J19 for Simplex$78.95 Note: Minimum order 5

ASKIT03-J19 for Standard Electric$104.95 Note: Minimum order 5

154The affordable solution to your clock repair needs.

7 –

Rep

airs

, Mov

emen

ts &

Par

ts

Repair with mechanical movement

Replace with AllSync®Plus

movementWired System Clocks

3-wire synchronous clocks: 110vac and 24vac: American Time A and B Series, Cincinnati D10 and D12, Edwards 010 and 012, IBM 77 Series, Simplex 77 Series, Lathem SS and Stromberg 3000

$130.00 $100.00

Electronic clocks: American Time, Simplex® and IBM $160.00 N/A

3-wire synchronous clocks: American Time H Series, Honeywell, Cincinnati D8 and Faraday $150.00 $100.00

3-wire synchronous clocks: National Time, Rauland and Dukane $150.00 $100.00

Standard CR and GRC dual motor clocks and American Time X Series DM clocks $170.00 $130.00

Single motor with correction coil: Setco dual motor series clocks and American Time X Series clocks $170.00 $130.00

Repair ServiceOften times, repairing a failed legacy clock means replacing the motor movement. That replacement can be as easy as sending us the clock.

Whether you choose another mechanical movement, or our AllSync® Plus movement, we'll repair, clean and test the clock to make sure it is back in working order and you'll receive it back under warranty.

Repair Pricing

2YearWARRANTY

We Can Repair Them All!

®

®

FARADAY

1YearWARRANTY


7 –

Rep

airs, Movem

ents & P

arts

Repair Pricing

“Time Care” Repair Pricing

Repair GuidelinesIn order to guarantee prompt service, please call Customer Service at 800-328-8996 for a Return Material Authorization number (RMA #). You must get the RMA # prior to sending your clocks to American Time.

The package containing your repair must show on the outside the: RMA #, your company name and address, a contact name, telephone number and email address. Packages with an RMA # clearly shown will be prioritized ahead of those without.

Specialty Clocks

Glo Dial manual reset movement 1YearWARRANTY $170.00

Glo Dial remote reset movement 1YearWARRANTY $250.00

Costs are estimates only. Actual may vary. Evaluation for original equipment manufacturer (OEM), $25.Additional For glass crystal: add $10.00 for each 15" diameter clock and $30.00 for each 18" to 24" clock.

Charges: For Plexiglass crystal: add $20.00 for each 10" and 12" diameter clocks, $25.00 for 15" diameter clocks and $30.00 for 18" diameter clocks.

Stand Alone Clocks

AllSet quartz and electric clocks 2YearWARRANTY $50.00

R&H electric clocks and American Time M100 electric clocks 2YearWARRANTY $70.00

American Time quartz clocks: M Series quartz clocks and R&H Series quartz clocks 2YearWARRANTY $50.00

Radio Controlled clocks 1YearWARRANTY $50.00

Mechanical Clocks

Dual motor clocks, 45th and 59th minute correction: American Time and Simplex® 1YearWARRANTY $170.00

Dukane Old Style AC/DC clocks and American Time D Series clocks 1YearWARRANTY $160.00

Edwards dual motor replacement clocks and American Time P Series clocks 1YearWARRANTY $150.00

2 and 3-wire 24vdc minute impulse clocks: American Time, Simplex®, Cincinnati and Lathem 1YearWARRANTY $150.00

American Time V Series impulse clocks and Stromberg minute impulse 24vdc clocks 1YearWARRANTY $150.00

Network Clocks

Wi-Fi analog clocks 2YearWARRANTY $100.00

Wi-Fi digital clocks 2YearWARRANTY Evaluation

American Series Power over Ethernet (PoE) analog clocks 2YearWARRANTY $100.00

American Series Power over Ethernet (PoE) digital clocks 2YearWARRANTY Evaluation

System Clocks

SiteSync IQ® wireless analog clocks 2YearWARRANTY $100.00

SiteSync IQ wireless digital clocks 2YearWARRANTY Evaluation

SiteSync IQ master and Remote Transmitter 2YearWARRANTY Evaluation

AllSync Plus analog clocks 2YearWARRANTY $100.00

AllSync IQ® master 2YearWARRANTY Evaluation


7 –

Rep

airs

, Mov

emen

ts &

Par

tsGlo Dial Movements and PartsFor Large Dial Outdoor Clocks/Signs 18", 24", 30", 36" & 48"

9172

CRS12901 CRS970(switch)

H000107(keyed)

8075

Glo Dial CloCk HanD Dimensions

CFF125A Backbox63⁄16"h × 63⁄16"w × 31⁄8"dIncluded with any Glo Dial movement purchase(shown with movement)

Ø 916

MVMNTBOX

HR HUB

MIN HUB

CB

A

38

Ø1.000

Hand Shaft Lengths A B CSHORT 11⁄16" 17⁄16" 23⁄16"LONG 3" 33⁄4" 41⁄2"

A

DC

B

Hand

Short shaft

Long shaft

Specially designed for outdoor operation, these movements will keep correct time under all weather conditions. Precision-cut gears, slow-turning shafts and lubricants ensure long, maintenance-free operation. The motors used on Glo Dial movements are designed to carry a greater load than required with no need for heaters or fans for extreme weather.

• Maximum rated face diameter: 48"• Specify long shaft for internally illuminated clocks (allows movement to

be recessed to reduce shadows around the hub area)• Wired remote reset switches available• Temperature range -40˚ to +140˚ F

1YearWARRANTY

Note: If making hands, maximum combined hand weight may not exceed 19.9 oz.

Part No. Original No. Description EachN12930-J19 H200M2 Manual reset—short shaft $272.95N12932-J19 H200M4 Manual reset—long shaft $303.95N12931-J19 H200R2 Electric remote reset—short shaft $377.95N12933-J19 H200R4 Electric remote reset—long shaft $408.95CRS12901-J19 Outdoor remote reset switch $85.95CRS970-J19 Indoor remote reset switch $45.95H000107-J19 Key lock switch $59.95H002940-J19 Replacement key for H000107 $5.958075-J19 120vac, 1rpm, drive motor $47.959172-J19 120vac, 2rpm, reset motor $52.95

FYI – For rear installation (sign style), use the four side mounting holes on the backbox. For wall installation (front, skeleton style), use the four front mounting holes. All hands manufactured by American Time for large movements (18" through 48") are balanced. In order to maintain the warranty on these movements, they must be driving balanced clock hands.

Face Dia. Part No. Description Each A B C D18" CH911-J19 Minute hand $31.95 83⁄4" 211⁄16" 11⁄2" 13⁄16"18" CH910-J19 Hour hand $31.95 63⁄4"24" CH913-J19 Minute hand $37.95 107⁄8" 31⁄4" 2" 13⁄16"24" CH914-J19 Hour hand $37.95 71⁄4"30" CH919-J19 Minute hand $42.95 14" 41⁄4" 21⁄4" 1"30" CH918-J19 Hour hand $42.95 101⁄2"36" CH923-J19 Minute hand $47.95 163⁄8" 43⁄4" 23⁄4" 13⁄4"36" CH922-J19 Hour hand $47.95 107⁄8"48" CH927-J19 Minute hand $52.95 217⁄8" 61⁄4" 33⁄4" 17⁄8"48" CH926-J19 Hour hand $52.95 149⁄16"

CJ2900-J19 Hub kit $29.95 (required if making your own hands)


7 –

Rep

airs, Movem

ents & P

artsReplacement System Clock Movements

Complete with Correction Bracket and Coil Assembly

E65RA(KT65RA)

SETCO original

CinCinnati, eDwarDsWired Synchronous(set hands at 5:59)

FaraDay, HoneywellWired Synchronous(set hands at 4:58)

simplex®, iBmWired Synchronous(set hands at 5:59)

1445

1444

288003 288001

national timeWired Synchronous(set hands at 6:00)

stanDarD® eleCtriC GrC Dual Motored(set hands at 6:00)

See page 119 for hands.

Includes hands for a 12" clock

Includes hands for a 12" clock

If you're doing your own system clock repairs, we have everything you need to get the job done right. We also offer an Installation/Operation manual for our best selling mechanical movements. Ask for it when placing your order.

Part No. Voltage Each

Simplex, IBM

N1276-J19 120/120vac $107.95

N1276E-J19 Electronic $135.95

N1277-J19 120/24vac $107.95

N1278-J19 24/24vac $107.95

Cincinnati, Edwards

N1273-J19 120/120vac $107.95

N1274-J19 120/24vac $107.95

N1275-J19 24/24vac $107.95

Faraday, Honeywell

N1193-J19 120/120vac $114.95

N1194-J19 120/24vac $114.95

N1195-J19 24/24vac $114.95

Motors Only for above movements

288003-J19 120vac $31.95

288001-J19 24vac $31.95


National Time, NATSCO

N1279110-J19 120vac $209.95

N127924-J19 24vac $209.95


E65RA-5-6-110V-J19 120vac $42.95

E65RA-5-6-24V-J19 24vac $42.95


Standard, SETCO

N109410110-J19 120vac $304.95

N10941024-J19 24vac $314.95


1444-J19 120vac, 1rpm $42.95

6743-J19 24vac, 1rpm $42.95

Reset Motor

1445-J19 120vac, 60rpm $42.95

6761-J19 24vac, 60rpm $42.95


7 –

Rep

airs

, Mov

emen

ts &

Par

ts

1

4

3

5

2

8

4

79

Extension Spring Part of Item 1

6

34

7

8

9 10 411

12

5Bushingpart of Item 6

Replacement for Cincinnati ⁄Edwards Correction Bracket AssemblyComplete Assembly

Doing a Lot of Repairs? American Time has two kits containing the parts you will need to repair your clock movements. The two versions are used for the Simplex® and Cincinnati replacement movements, which use the 33-1111 and 33-1112 on the facing page.

Part No. Description Each

CA19110-J19 120vac/60Hz $41.95

CA1924-J19 24vac/60Hz $42.95

CA2020-J19 Less Coil $20.95

Part No. Item Description Each

542098R-J19 1 Coil (120vac) $22.95

542086R-J19 1 Coil (24vac) $22.95

CA418-J19 2 Yoke Assembly $ 5.95

424037-J19 3 Screw $ 0.45

268026-J19 4 Washer $ 0.25

A2041-J19 5 Roll Pin (529-138) $ 0.95

CA417-J19 6 Armature $ 6.95

CA417A-J19 6 Armature Assembly $ 9.95

A2039-J19 7 Stud (539-016) $ 0.95

A1210-J19 8 Shim $ 0.60

CA020-J19 9 Cam $ 0.95

S002-1-J19 10 Sector $ 2.65

322117-J19 11 Hex Nut $ 0.35

Complete Assembly


A1161AR-J19 1 Coil Assy. (120vac) $13.95

A1162A-J19 1 Coil Assy. (24vac) $13.95

CFF102-J19 2 Coil Bracket $3.95

A1167-J19 3 Screw $0.25

9007603-J19 4 Screw $0.25

A3224-J19 5 Washer $0.25

H004422-J19 5 Screw $0.25

CB8079-J19 7 Actuator Leaf Assembly $5.95

22172-J19 8 Return Spring $1.00

A1166-J19 9 Corrective Lever $3.95

Part No. Description Each

CB2007-J19 120vac/60Hz $24.95 (D10)

CB2008-J19 24vac/60Hz $24.95 (D12)

Replacement Movement PartsReplacement for Simplex® Correction Bracket Assembly

Part No. KIT-SIM-J19 $64.95

For American Time, Simplex® and IBM 3-wire synchronous clocks. Kit includes:

30 226002 Grommets 5 CA020 Cams

30 394127 Rivets 5 S002-1 Sectors

30 327002 Speed Nuts 10 A1132 Wire nuts

5 511131 Friction Plates 20 942512A Terminals

5 511110 Min. hand nuts 20 A1165 Screws

5 511129 Sec. hand nuts 20 A1125 Wire ties

1 SIMPLEX-MANUAL Installation/Operation Manual

Part No. KIT-CIN-J19 $64.95

For American Time, Cincinnati and Edwards 3-wire synchronous clocks. Kit includes:

30 226002 Grommets 5 A1166 Correction lever

30 394127 Rivets 5 22172 Return springs

30 327002 Speed Nuts 20 A1132 Wire nuts

5 511131 Friction Plates 20 942512A Terminals

5 511110 Min. hand nuts 20 M1111 Retainer rings

5 511129 Sec. hand nuts 20 A1125 Wire ties

1 CINC-MANUAL Installation/Operation Manual


7 –

Rep

airs, Movem

ents & P

arts

Mechanical Motor Movement onlyno correction coil

32

4

1

The most common corrective movement. Used in American Time®, Simplex®, Cincinnati, Faraday, Lathem and Edwards

288003 288001

1YearWARRANTY

Replacement Movements and Parts

IN STOCK—SAME DAY SHIPMENT!

Call Today to Request Your Motor Movement Manual

Replacement Movement Back Plate Part No. 33-1-J19$13.95


288003-J19 1 Motor (120vac) $31.95

288001-J19 1 Motor (24vac) $31.95

226002-J19 2 Grommet $0.40

394127-J19 3 Rivet $0.55

327002-J19 4 Speed Nut (Simplex⁄IBM) $0.60

942977-J19 4 Speed Nut (Cinc⁄Edw) $0.60


33-1111-J19 Motor Movement (120vac) $76.95

33-1112-J19 Motor Movement (24vac) $76.95


“When it comes to movements and clock parts, you seem to have everything I need when I need it. I think you are a great supplier and I would recommend you to my peers. You have a knowledgeable staff with all the answers.”

Herb Terdin, Greater Orlando Aviation Authority


7 –

Rep

airs

, Mov

emen

ts &

Par

tsReplacement Motors

Collector Assembly Movement

Time Recorder Motor

Used in advertising lights, such as: Budweiser Parade (shown)Budweiser SpectacularBudweiser Illuminated Spectacular Olympic GlobeMichelob Light Hanging CrystalMichelob Hanging CrystalMichelob Soaring EagleMichelob Amberbach 2001

Replacements for: Erie, Honeywell, FlairDamper Control MotorsCLASS A

Replacement damper control motors for Erie classic zone valves in hydronic heating systems. Not to be used with Erie “pop top” valves.

These motors are all CCW rotation.

*Requires a 5 piece minumum order.

1YearWARRANTY


“Thank you for your great team effort when I ordered a part for a customer’s 1950s Chevrolet Dealer Clock. The staff at American Time has been nothing less than great, from the web site, fast shipping, quality of the part to the phone call to help me get the best shipping for my money. I haven’t seen this much service in a long time! Thanks to everyone involved in my little order. You made my customer and me very happy.”

Tom Vaughn, Tom's Tic Toc Shop

Part No. RPM Voltage Each

30A17A-J19 5⁄6 24v 50/60Hz $82.95

30A17B-J19 5⁄6 120v 50/60Hz $82.95

30A17U-J19* 5⁄6 240v 50/60Hz $82.95

Part No. RPM Voltage Each48001-181-J19 1.5 120vac 60Hz 4watt $102.95BZ357LD-110V-J19 (Motor Only) $52.95

MFG. Part No. Style Description Each

Lathem K342RC-5-6-J19 D 120vac 60Hz 1rpm 4watt CW $46.95


7 –

Rep

airs, Movem

ents & P

artsSynchron® Clock Motors

*Synchron and American Time Part No. - use when placing order

288003 288001 14451444

Style ARound with 4 Mounting Lugs

Style BRound with 2 Mounting Lugs

Style CPear Shaped with 2 Mounting Lugs

Wall Clock Motors

Clock Mfg. Style Synchron® No. Part No. Rotation RPM Voltage Each

American Time A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

A Z43RA-1WR-5-6-J19* R 1 120vac/60Hz $64.95

C K43RC-5-6-110V-J19* R 10 120vac/60Hz $85.95

Cincinnati A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

Dukane A E65RA-5-6-110V-J19* R 1 120vac/60Hz $42.95

A E65RA-5-6-24V-J19* R 1 24vac/60Hz $42.95

A CZ44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A CZ44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

Edwards A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

Faraday A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

Honeywell A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

IBM A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

Lathem A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

National Time A E65RA-5-6-110V-J19* R 1 120vac/60Hz $42.95

A E65RA-5-6-24V-J19* R 1 24vac/60Hz $42.95

Simplex® A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

A BD118LA-5-6 288006-J19 L 1 120vac/60Hz $52.95

Standard® C BB12LC-5-6 1445-J19 L 60 120vac/60Hz $42.95

C 35351L-5-6 1444-J19 L 1 120vac/60Hz $42.95

C BB12LC-5-6 6761-J19 L 60 24vac/60Hz $42.95

C 35351L-5-6 6743-J19 L 1 24vac/60Hz $42.95

Stromberg A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95

A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95

Non-System A I43RA-76-6 288003-J19 R 1 120vac/60Hz $31.95

Non-System B DD129RB-6-76-J19* R 1 120vac/60Hz $42.95

Non-System B BZ357LD-110V-J19* L 1.5 120vac/60Hz $52.95

Cincinnati A K13RA-5-6-110V-J19 R 1 120vac/60Hz $52.95

Standard Electric C A12RC-5-6-110V-J19 R 1 120vac/60Hz $52.95


7 –

Rep

airs

, Mov

emen

ts &

Par

ts

Matching Nut

.390" max. dia. × .260 long

2.875"

2.625"Shaft is .784" from plate to tip

Rear Reset

Synchron® C Style Electric Movements

Type C2 Movements (for dial sizes 10-18")


2.875"

2.625"

Shaft #3⁄824 ×.260 long

Shaft is 13⁄8" from plate to tip


Synchron® movements perform flawlessly worldwide in a variety of speed and voltage/hertz combinations, with light to moderate torque loads. These precision Type C electric movements are designed and built to give sustained split-second accuracy in clocks ranging from the classic classroom to a built-in skeleton clock up to 24" in diameter. Choose from rear reset or bottom reset for your application. All movements are brass geared.

Bottom Reset

2.875"

2.625"

Shaft #3⁄824 ×.260 long

Shaft is 1" from plate to tip

Bottom Reset

Bottom Reset

1YearWARRANTY

For all movements:• Maximum hand weight 5 oz.• Temperature range -40˚F-140˚F• Smooth sweep hand

Rear Reset

Type C5 12 Hour

Bottom Reset


N2068110V12C-J19 120vac $78.95

N206824V12C-J19 24vac $83.95

Supplied with a set of hands for 12" models listed

For other sizes change last two numbers before dash in Part No.

Type C4 12 Hour


Rear Reset

N2069110V12C-J19 120vac $78.95

N206924V12C-J19* 24vac $83.95

Bottom Reset

N2067110V12C-J19 120vac $78.95

N206724V12C-J19 24vac $83.95*5 piece minimum order



Type C2 12 Hour


Rear Reset

N1060110V12C-J19 120vac $78.95

N106024V12C-J19 24vac $83.95

Bottom Reset

N2066110V12C-J19 120vac $78.95

N206624V12C-J19 24vac $83.95




7 –

Rep

airs, Movem

ents & P

arts

1YearWARRANTY

Hands for the C Style Movements on page 162

Doing Clock Repair?Keep your clock appearance consistent and performing like new with these movements and accessories!

288003 288001

Sweep Second Hand

Hands for 12" Dial

Hands for 15" Dial

Hands for 18" Dial

Hands for 24" Dial

For C2 Movements

For C4 & C5 Movements

Bottom Reset Stems for Movements on page 162

Cotter pin included

Synchron® C Style PartsMotors for C Style movements

Dial Size C2 Movement C4 Movement C5 Movement

12" Part No. Each Part No. Each Part No. Each

Hour CFC143-J19 $4.95 CH315A-J19 $4.95 CH315A-J19 $4.95

Minute CFC144-J19 $4.95 CFC122-J19 $4.95 CFC122-J19 $4.95

Sweep A1438-J19 $4.95 CH282-J19 $4.95 CH282-J19 $4.95

15"

Hour CH005-J19 (also C4) $4.95 CH284-J19 $4.95 CH284-J19 $4.95

Minute CH013-J19 (also C4) $4.95 CH285-J19 $4.95 CH285-J19 $4.95

Sweep CH107P-J19 (also C4) $4.95 CH282-J19 $4.95 CH282-J19 $4.95

18"

Hour CH202-J19 $4.95 CH205-J19 $4.95 CH205-J19 $4.95

Minute CH203-J19 $4.95 CH288-J19 $4.95 CH288-J19 $4.95

Sweep A1800SHBLK-J19 $4.95 A1800SHC4C5-J19 $4.95 A1800SHC4C5-J19 $4.95

24"

Hour N/A CH290-J19 $4.95 CH290-J19 $4.95

Minute N/A CH291-J19 $4.95 CH291-J19 $4.95

Sweep N/A A1800SHC4C5-J19 $4.95 A1800SHC4C5-J19 $4.95

Part No. Orig. No. Voltage Each

288003-J19 I43RA-5-6 120vac/60Hz $31.95

288001-J19 I43RA-5-6 24vac/60Hz $31.95

J1603-J19 I43RA-5-6 240vac/60Hz $59.95

J1604-J19 I43RA-5-6 240vac/50Hz $59.95

Part No. Clock Size Stem Length Each

CFF113-J19 12" 41/2" $4.95

CFF114-J19 15" 71⁄2" $4.95

CFF115-J19 18" 9" $4.95

CFF116-J19 24" 10" $4.95


7 –

Rep

airs

, Mov

emen

ts &

Par

ts


“I had a great experience to get my Harley Davidson light working. I thought I would be turned away because I needed a motor for a light, not a clock. The woman who helped me was very easy to work with. Your product arrived quickly and was exactly what I needed. I have my own business and I know the way you're handling your operations is top notch.”

Rob Rivas, Hi-Tech Inspection Service

Electric MovementsAllSet® Electric Movement

Clock Receptacle (2-pole/3-wire)

This white clock receptacle contains a 120vac, 15amp recessed outlet and clock hanger. Simply plug in your clock, wrap or tape the electrical cord behind it and hang the clock. 2-pole, 3 wire.

• Automatic Daylight Saving Time adjustment• 120vac/60Hz• 51/2' black cord• Accurate to ±0.8 seconds per day• Size: 21⁄4" square x 5⁄8"d• Supplied with a set of hands for a 12" dial• Step sweep hand• Shaft is 9⁄16”• Temperature range -5˚F to 140˚F

1YearWARRANTY

Once Set. You're AllSet®!

F Style HandsC Style Hands

688W-J19 $18.95

N404912C-J19 C style handsN404912F-J19 F style hands(Hands shown below)

$26.95


7 –

Rep

airs, Movem

ents & P

artsBattery Movements

AllSet® Battery Movement

1YearWARRANTY

1YearWARRANTY

• Easy set instructions• Uses one AA alkaline battery (sold separately)• Includes a set of hands for a 12" dial and mounting hardware• 21⁄8" x 21⁄8" x 5⁄8"d• Shaft 5⁄8" long• Temperature range -5˚F to 115˚F

F Style Hands

C Style Hands

The AllSet battery operated quartz movement automatically adjusts for Daylight Saving Time changes. No signals or antennas required!

AA Alkaline BatteriesA1238-J19

Each$.75

Don't forget the batteries!

AA Battery Movement Kit—12 Hour

• Accurate to ±1 second per day• Powerful stepper action• Uses one AA alkaline battery

(sold separately)• Includes a set of hands for a

12" dial (see styles above) and mounting hardware

• Temperature range 23˚F to 122˚F

This best selling movement is used in all our AA battery clocks. Customers tell us they appreciate the dependability and price of this high-efficiency movement.

MADE INUSA N2184

Shaft 1⁄4" dia. x 3⁄4" long

21⁄8" x 21⁄8" x 1⁄2"d

N347812C-J19 C style handsN347812F-J19 F style hands

$17.95

Part # Description Each

N218412C-J19 For dials up to 1/4" thick, C style hands $7.95

N218412F-J19 For dials up to 1/4" thick, F style hands $7.95


7 –

Rep

airs

, Mov

emen

ts &

Par

ts


N104212C-J19 for dials up to 1/4" thick, C style hands $14.95

N104212F-J19 for dials up to 1/4" thick, F style hands $14.95

Battery MovementsRadio-Controlled Battery Movement

This radio controlled battery movement automatically resets at Daylight Saving Time changes. It uses a AA battery and has a miniaturized radio receiver that receives a signal from the NIST Atomic clock in Ft. Collins, CO. and adjusts several times a day.

The Powerhouse Q-90 “C” Battery Movement Kit—12 Hour

• Accurate to ±1 second per day• Powerful stepper action• Built-in molded hanger will hold up to 4 lbs.• Uses one C battery (sold separately)• Size: 23⁄4"h × 21⁄8"w × 1"d• Shaft is 5/8" long

• Accurate to ±1 second per day• Easy set instructions• Synchronized up to four times per day• Selectable automatic reset for Daylight Saving Time or

bypass for areas that do not observe DST• Includes a set of hands for a 12" clock• Uses one AA alkaline battery (sold separately)• Size: 35⁄8"h × 23⁄16"w × 5⁄8"d• Shaft is 1/2" long

Some customers prefer a C battery movement. The Q-90 has all the features of a reliable quartz movement.

Note: See hands above

F Style HandsC Style Hands

1YearWARRANTY

1YearWARRANTY

N218912C-J19 C style handsN218912F-J19 F style hands

$26.95


7 –

Rep

airs, Movem

ents & P

arts


N213618C-J19 for 18" clock $22.95

Minute hand 8" from mounting hole to tip

N213624C-J19 for 24" clock $34.95

Minute hand 103⁄4" from mounting hole to tip

Battery MovementsSmooth Sweep Battery Movement

Compact High-Torque AA Battery Movement Kit for 18" and 24" Clocks

Kit includes:• Movement• Rubber Washer• Brass Hardware• Hanger• C style hands for 18" or 24" clock dial (including sweep second hand-not shown)

Features:• Made in Germany• Can drive hands for up to a 24" clock• Uses one AA alkaline battery (sold separately)• 21⁄8" x 21⁄8" x 5⁄8"d

C Style Hands

This movement, featuring a smooth sweep second hand, guarantees silent operation of your battery clocks.

• Silent operation• Uses one AA alkaline battery (sold separately)• Accuracy ±1 second per day• Built-in molded hanger• Includes a set of hands for a 12" dial and mounting hardware• 21⁄4" x 21⁄4" x 5⁄8"d• Shaft 5⁄8" long• Temperature range 23˚F to 122˚F

Need this movement in a complete clock? See page 139.

1YearWARRANTY

1YearWARRANTY

AA Alkaline BatteriesA1238-J19

Each$.75

N473312C-J19C style hands

$12.95

clock repairs & parts - wall clocks, time systems, clock parts...3-wire synchronous clocks:...

Documents