clips, bearing plates and fasteners for standing … · clips, bearing plates and fasteners for...

Clips, Bearing Plates and Fasteners forStanding Seam Panel Attachment

1

www.sfsintecusa.com

SFS intec has been manufacturing standing seam clips for over thirty years and we are the metal building industry’s most complete resource for standard and customer specific standing seam clips for roof and wall panels. SFS intec clips and bearing plates are designed and manufactured to meet industry standards and are available in a wide variety of materials and gauges for snap lock, mechanical seam and architectural panels. We also offer a complete line of bearing plates and fasteners specifically designed for the attachment of our standing seam clips.

Design

Our standing seam clip product offering has been designed to accommodate most panel and insulation thickness applications. In addition, our engineers can custom design clips to meet specific structural and corrosion resistance requirements. We can work with you to develop new clip designs for your panels, manufacture clips from designs you supply or suggest improvements to enhance the performance of your standing seam clips.

Manufacturing

At SFS intec, our goal is to produce the best, cost-effective standing seam clips on the market that comply to industry approvals and meet design load requirements. We can make dies, manufacture clip prototypes and perform a series of tests to assure proven performance in the field. In-house stamping operations allow us to manufacture uniform quality clips in large or small quantities, time after time.

Testing

SFS intec has a 12’x24’ test chamber available to our customers for uplift testing, both positive and negative design pressure. Our test bed complies with FM4470 and 4474 protocol as well as ASTM E1592 test protocol. This service allows SFS intec to produce prototype clips for our customers and test a clip’s design loads prior to production tooling. Shear, tension, pull-out, pull-over and wind uplift tests can be performed to ensure that the clip and the clip fasteners meet your performance requirements as well as FM and UL standards.

Service

With our four strategically located service centers in the U.S. and our operations in Canada, SFS intec is positioned to providing you the highest quality service levels in the industry. With clips held in inventory at service centers near you, your inventory levels and delivery times will be reduced, saving you time and money.

Section ....................................................... Page

Snap Lock Clips ............................................2-5

Fixed Clips ...................................................6-10

Float Clips .................................................. 11-15

Specialty Clips ..........................................16-17

Bearing Plates ................................................18

Panel Clip Fasteners .................................19-21

Table of Contents

2www.sfsintecusa.com

Drawings are for illustration purpose only. Dimensions are nominal inches unless otherwise noted. Engineering drawings should be referenced for exact tolerances and will be furnished upon request.

Snap Lock Clips

Snap Lock 1”

Height = 1.01”Width = 3.50”2-Hole

New Part No.

OriginalPart No. Material Ctn. Qty.

1112979 1112979 18 ga. G-90 Galv. 200

1199659 1199659 22 ga. G-90 Galv. 200

Snap Lock 1-1/2”


NewPart No.


1036000 1036000 24 ga. G-90 Galvalume 1,000

Snap Lock 1-1/2”


NewPart No.


1051754 1051754 18 ga. G-90 Galv. 500

1051727 1051727 20 ga. G-90 Galv. 500

1051768 1051768 18 ga. 304SS 500

1051730 1051730 20 ga. 304SS 500



Snap Lock 1-1/2”


New Part No.


1317980 1317980 20 ga. G-90 Galv. 500

.15

1.44

.42

.35

1.61

Snap Lock Clips

Snap Lock 1-1/2”


New Part No.


1023821 1023821 18 ga. G-90 Galv. 125

1319660 1319660 18 ga. 304SS 125

Snap Lock 1-5/8”


New Part No.


1241358 1241358 18 ga. G-90 Galv. 500

1278218 1278218 18 ga. 304SS 500

1.46

1.81

.33

.42

1.625

.15



Snap Lock Clips

Snap Lock 1-3/4”


New Part No.


728731 M0406 18 ga. G-90 Galv. 500

728733 M0541 18 ga. 304SS 500

1.827

Snap Lock 1-3/4”


Snap Lock 1-3/4”


NewPart No.


1051721 1051721 18 ga. G-90 Galv. 500

1051723 1051723 18 ga. 304SS 500

New Part No.


1051718 1051718 20 ga. G-90 Galv. 500

1051714 1051714 20 ga. 304SS 500

1051719 1051719 20 ga. 316SS 500

1.827

.31

1.827



Snap Lock Clips

Snap Lock 1-3/4”


NewPart No.


728734 M0407 18 ga. G-90 Galv. 250

728739with Sealant

M0407-SL with Sealant

18 ga. G-90 Galv. 250

1106732 1106732 18 ga. 304SS 250

728741 M0549 18 ga. 316SS 250

1.827



Fixed Clips

Fixed Clip 1-1/2”


NewPart No.


1093692 1093692 24 ga. G-90 Galv. 350

1286215 1286215 26 ga. G-90 Galv. 350

1172646 1172646 24 ga. 304SS 350

Fixed Clip 1-1/2”


NewPart No.


1085437 1085437 22 ga. G-90 Galv. 250

1133891 1133891 22 ga. 304SS 250

1291010 1291010 24 ga. 304SS 250

1215420 1215420 26 ga. 304SS 250

1.59

Fixed Clip 2”


NewPart No.


728753with Sealant

M0405 with Sealant

22 ga. G-90 Galv. 400



Fixed Clips

Fixed Clip 2”


New Part No.


1213346 1213346 22 ga. G-90 Galv. 250

1213916 1213916 22 ga. 304SS 250

1389120 1389120 24 ga. 304SS 250

Fixed Clip 2”

Height = 2”Width = 3.00”3-Hole

NewPart No.


1292548with Sealant

1292548with Sealant

22 ga. G-90 Galv. 250

Fixed Clip 2”


NewPart No.


1082064 1082064 22 ga. G-90 Galv. 400

.80

.70

.45

2.00

.15



Fixed Clips

Fixed Clip 2-3/8”


NewPart No.


728494with Sealant

M0470 with Sealant

22 ga. G-90 Galv. 200

747238with Sealant

M0470-300 with Sealant

22 ga. 304SS 200

Fixed Clip 2-3/8”


New Part No.


1082066 1082066 22 ga. G-90 Galv. 250

1213866 1213866 22 ga. 304SS 250

Fixed Clip 2-3/8”


NewPart No.


729720with Sealant

M0531 with Sealant

22 ga. G-90 Galv. 250



Fixed Clips

Fixed Clip 3”


NewPart No.


728472with Sealant

M0575with Sealant

22 ga. G-90 Galv. 250

.80

.935

.375

3.10

Fixed Clip 3”


NewPart No.


729721with Sealant

M0536 with Sealant

22 ga. G-90 Galv. 250

Fixed Clip 3”


NewPart No.


1082067 1082067 22 ga. G-90 Galv. 250

R.07



Fixed Clips

Fixed Clip 3”


NewPart No.


728495with Sealant

M0475 with Sealant

22 ga. G-90 Galv. 200



Float Clips

Float Clip 1-1/2”


NewPart No.

OriginalPart No. Base Material Tab Material

Ctn. Qty.

1183626 with Sealant


16 ga. G-90 Galv. 22 ga. G-90 Galv. 100

1374573with Sealant

1374573with Sealant

16 ga. G-90 Galv. 22 ga. 304SS 100

Float Clip 1-1/2”


NewPart No.


Ctn. Qty.

1069208 1069208 16 ga. G-90 Galv. 22 ga. G-90 Galv. 80

1069994 1069994 16 ga. G-90 Galv. 22 ga. 304SS 80

1291008 1291008 16 ga. G-90 Galv. 24 ga. 304SS 80

1222957 1222957 16 ga. G-90 Galv. 26 ga. 304SS 80

1165861 1165861 16 ga. 304SS 26 ga. 304SS 80

Float Clip 2”


NewPart No.

Original Part No. Base Material Tab Material

Ctn. Qty.

728902with Sealant

M0413 with Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 100

732941with Sealant

M0413-304 wth Sealant

16 ga. G-90 Galv. 22 ga. 304SS 100



Float Clips

Float Clip 2”


New Part No.


Ctn. Qty.

753279with Sealant

M0413-MOD with Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 100

1311597with Selaant

1311597with Selaant

16 ga. 304SS 22 ga. 304SS 100

1395587with Selaant

1395587with Selaant

16 ga. 316SS 22 ga. 316SS 100

Float Clip 2”


NewPart No.


Ctn. Qty.



16 ga. G-90 Galv. 22 ga. G-90 Galv. 100



16 ga. G-90 Galv. 22 ga. 304SS 100

1314596with Sealant

1314596with Sealant

16 ga. 304SS 22 ga. 304SS 100

1331799with Sealant

1331799with Sealant

16 ga. 304SS 26 ga. 304SS 100

.48

Float Clip 2”


NewPart No.


Ctn. Qty.

1069206 1069206 16 ga. G-90 Galv. 22 ga. G-90 Galv. 80

1142738 1142738 16 ga. G-90 Galv. 24 ga. G-90 Galv. 80

1069993 1069993 16 ga. G-90 Galv. 22 ga. 304SS 80

1257445 1257445 16 ga. G-90 Galv. 26 ga. 304SS 80

1233451 1233451 18 ga. G-90 Galv. 26 ga. 304SS 80

1318408 1318408 16 ga. 304SS 24 ga. 304SS 80

1213935 1213935 16 ga. 304SS 26 ga. 304SS 80



Float Clips

Float Clip 2”


New Part No.


Ctn. Qty.

1020252 1020252 16 ga. G-90 Galv. 22 ga. G-90 Galv. 100

1184718 wth Sealant

1184718 wth Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 100

1258847 1258847 16 ga. G-90 Galv. 22 ga. 304SS 100

1398805 wth Sealant

1398805 wth Sealant

16 ga. G-90 Galv. 22 ga. 304SS 100

Float Clip 2”


New Part No.


Ctn. Qty.

728907with Sealant

M0480 with Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 80

747235with Sealant

M0480-300 with Sealant

16 ga. G-90 Galv. 22 ga. 304SS 80

Float Clip 3”


NewPart No.


Ctn. Qty.

728906with Sealant

M0414 with Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 100

1311600with Sealant

1311600with Sealant

16 ga. 304SS 24 ga. 304SS 100



Float Clips

Float Clip 3”


New Part No.


Ctn. Qty.

728908with Sealant

M0485with Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 60

Float Clip 3-3/8”For 2” PanelHeight = 3.375”Width = 4.30”2-Hole

NewPart No.


Ctn. Qty.

1020239 1020239 16 ga. G-90 Galv. 22 ga. G-90 Galv. 70

1184717with Sealant

1184717with Sealant

16 ga. G-90 Galv. 22 ga. G-90 Galv. 70

.49

3.375


NewPart No.


Ctn. Qty.

1020236 1020236 16 ga. G-90 Galv. 22 ga. G-90 Galv. 80

R.10

3.375

.49

.71

3.04

100º



Float Clips


NewPart No.


Ctn. Qty.

1020238 1020238 16 ga. G-90 Galv. 22 ga. G-90 Galv. 60

.49

4.375



Specialty Clips

Butterfly Tab 1-1/2”

New Part No.

OriginalOld Part No. Material Ctn. Qty.

1238708 1238708 24 ga. G-90 Galv. 200

1238709 1238709 24 ga. 304SS 200

1236937 1236937 26 ga. 304SS 200

Butterfly Base 1-1/2”2-Hole

NewPart No.


1126602 1126602 22 ga. G-90 Galv. 200

1270019 1270019 22 ga. 304SS 200

1291593 1291593 26 ga. 304SS 200

.91

Butterfly Tab 2”

NewPart No.

Original Part No. Material Ctn. Qty.

1216534 1216534 22 ga. G-90 Galv. 150

1342536 1342536 22 ga. 304SS 150

.90



Specialty Clips

Butterfly Base 2”2-Hole

NewPart No.

Original Part No. Material

Ctn. Qty.

1126600 1126600 18 ga. G-90 Galv. 150

Batten Trim (Spider) Clip

Height = 1.80”Width = 1.50”

Bermuda (Wall) Clip

Height = 2.54”Width = 1.86”

NewPart No.


1324506 1324506 22 ga. G-90 Galv. 500

728473 M0540 22 ga. 304SS (1/4 hard) 500

NewPart No.


1239568 1239568 24 ga. 304SS 500

.27

.85

1.95

1.76

1.863”2.

536”

1.30

0”0.

190”

0.076”

0.076”

0.73

6”

R 0.055”



Bearing Plates

Snap Lock Bearing Plate

Universal Bearing Plate

NewPart No.

OriginalPart No. Dimension Material

Ctn. Qty.

1273465 1273465 4.75” x 6” 24 ga. G-90 Galv. 125

NewPart No.

OriginalPart No. Dimension Material

Ctn. Qty.

1273467 1273467 4” x 6” 18 ga. G-90 Galv. 125

1273469 1273469 4” x 6” 20 ga. G-90 Galv. 125

1273470 1273470 4” x 6” 22 ga. G-90 Galv. 125

1273482 1273482 4” x 6” 24 ga. G-90 Galv. 125

1273483 1273483 4” x 5” 18 ga. G-90 Galv. 125

1273484 1273484 4” x 5” 20 ga. G-90 Galv. 125

1273487 1273487 4” x 5” 22 ga. G-90 Galv. 125

1273488 1273488 4” x 5” 24 ga. G-90 Galv. 125



• Designed with unique head styles, drill point configurations and material types to meet performance requirements to attach standing seam roof clips.

• Engineered profile features preventing panel damage from fastener head contact.

• Engineered installation torque drive control for uniform installation performance.

Application#10 Type A: Pancake Head 2/2 Phillips Square DriveCarbon Steel, Zinc Plated Metal to wood

#10 Type A: Pancake Head Phillips Drive300 Series Stainless SteelMetal to wood

#10 Self-Drill: Pancake Head 2/2 Phillips Square DriveCarbon Steel, Zinc PlatedMetal to metalMin projection: 3/8" of threads below substrate

#12–8 XG Low Profile Head 2/2 Phillips Square DriveCarbon Steel , Zinc PlatedMetal to wood

#12–8 XG Sharp Point: Pancake Head 2/2 Phillips Square DriveCarbon Steel , Zinc PlatedMetal to wood

Head Height: .080 – .068 Head Dia: .447 – .423 Thread Major Dia: .194 – .188 Thread Minor Dia: .133 – .126Strength (lbs ult.): Carbon Stainless Tensile: 1825 1653 Torsional: 48 in-lbs 50 in-lbs Shear: 1535 1587#10 Type A, Pull-out (lbs ult.):SPF wood: 1" penetration: 544 1-1/2” penetration: 995#10 Self Drill, Pull-out (lbs ult.): 12 ga (.105): 1782 14 ga (.075): 1072 16 ga (.060): 782

File Name: WG8.2_A1187.epsCreated by: EWB-11/27/02

Revised: MPD-00/00/02

POSITIVE reduced 00%

NEGATIVE reduced 00%

File Name: WG8.2_S3450.epsCreated by: EWB-11/27/02




Head Height: .040 – .030 Head Dia: .447 – .423 Thread Major Dia: .215 –.209 Thread Minor Dia: .133–.127Strength (lbs ult.): Tensile: 2183 Torsional: 60 in-lbs Shear: 1946Performance (lbs ult.): Pull-out SPF 1” Penetration 583SPF 1-1/2" Penetration 10291x4" Pine 5903/4” Plywood 5835/8” Plywood 3681/2” Plywood 35723/32" OSB 41219/32" OSB 33615/32” OSB 225

Head Height: .080 – .068 Head Dia: .447 – .423 Thread Major Dia: .215 –.209 Thread Minor Dia: .133–.127Strength (lbs ult.): Tensile: 2183 Torsional: 60 in-lbs Shear: 1946Performance (lbs ult.): Pull-out SPF 1” Penetration 583SPF 1-1/2” Penetration 10291x4” Pine 5903/4” Plywood 5835/8” Plywood 3681/2” Plywood 35723/32” OSB 41219/32” OSB 33615/32” OSB 225

Panel Clip Fasteners




Application#12 Type A: Pancake Head 2/2 Phillips Square DriveCarbon Steel , Zinc PlatedMetal to wood

#12 Self-Drill: Pancake Head SD2 2/2 Phillips Square DriveCarbon Steel , Zinc PlatedMetal to metalDrilling Capacity: .035 - .210 Min projection: 3/8” of threads below substrate .

1/4 -14 SD2 HWH Drilling capacity (#2 point): .050 – .150Attachment thickness: Thickness is based on normal, single thickness purlin/girt or multiple material thickness combined for total. Min projection: 3/8" of threads below substrate

12-24 SD5: Pancake Head 2/2 Phillips Square DriveCarbon Steel, Zinc PlatedMetal to metalDrilling capacity: .075 – .500Attachment thickness: Thickness is based on normal, single thickness purlin/girt or multiple material thickness combined for total.Min projection: 3/8” of threads below substrate

NotesDimensions are nominal inches unless noted. Pull-out values (pounds ultimate) are based on 50,000 psi hot rolled steel sheet material. Ultimate values listed are the result of laboratory testing. The specific job conditions should be considered and appropriate safety factors applied when specifying the proper fasteners.Fasteners installed in less than 1" of solid wood may have an increased potential for a connection failure over time. This may be due to the fasteners being stripped out during installation and/or due to the lack of adequate wood fiber material to hold the fastener in place when forces are exerted upon the connection.

5/16" AF Hex Washer Head 3/8" AF Hex Washer Head Thread Major Dia: .246 – .240 Thread Minor Dia: .192 – .185Strength (lbs ult.): Tensile: 3800 Torsional: 150 in-lbs Shear: 2850#2 Point, Pull-out (lbs ult.): 12 ga (.105): 2088 14 ga (.075): 1312 16 ga (.060): 903

File Name: WG(7.2)_S5271_14_14Impax.epsCreated by: EWB-12/12/02




Head Height: .090 – .078 Head Dia: .447 – .423 Thread Major Dia: .216 – .210 Thread Minor Dia: .186 – .181Strength (lbs ult.): Tensile: 3450 Torsional: 100 in-lbs Shear: 2420Pull-out (lbs ult.): 12 ga (.105): 1378 3/16" (.187): Exceeds tensile value 1/4" (.250): Exceeds tensile value

File Name: WG8.2_S3450.epsCreated by: EWB-11/27/02




Head Height: .090 – .078 Head Dia: .447 – .423 Thread Major Dia: .215 – .209 Thread Minor Dia: .164 – .157Strength (lbs ult.): Tensile: 2900 Torsional: 92 in-lbs Shear: 2050Pull-out (lbs ult.): 12 ga (.105): 1539 14 ga (.075): 1010 16 ga (.060): 724

Head Height: .080 – .068 Head Dia: .447 – .423 Thread Major Dia: .221 – .215 Thread Minor Dia: .162 – .155Strength (lbs ult.): Tensile: 1940 Torsional: 90 in-lbs Shear: 1805Pull-out (lbs ult.): SPF wood: 1" penetration: 622

File Name: WG8.2_A1187.epsCreated by: EWB-11/27/02






DescriptionNew Part No.

Original Part No. North American Code

Metal to Wood Application#10 Type A Pancake, Carbon Steel

10 x 1” 1294280 A1191F CSTA-#10x1-PC-PSQ

10 x 1-1/2” 1201576 A1351F CSTA-#10x1-1/2-PC-PSQ

10 x 2” 1201768 A1391F CSTA-#10x2-PC-PSQ

#10 Type A Pancake, 304 Stainless Steel

10 x 1” 790272 E0235F CSTA-S3-#10x1-PC-PH2

10 x 2” 1297583 E0271F CSTA-S3-#10x2-PC-PH2

#12 XG Low Profile

12–8 x 1” 1270912 - CSXG-#12x1-WF-PSQ

12–8 x 1-1/2” 1270916 - CSXG-#12x1-1/2-WF-PSQ

12–8 x 2” 1270920 - CSXG-#12x2-WF-PSQ

#12 XG Pancake

12–8 x 1” 1204879 A1900F CSXG-#12x1-PC-PSQ

12–8 x 1-1/2” 1295005 A1940F CSXG-#12x1-1/2-PC-PSQ

12–8 x 2” 1295007 A1950F CSXG-#12x2-PC-PSQ

#12 Type A Pancake

12 x 1” 782985 A1710F CSTA-#12x1-PC-PSQ

Metal to Metal Application#10 Self-Drill Pancake

10–16 x 1” SD 2 1201230 S3431F CSSD2-#10x1-PC-PSQ

10–16 x 1-1/2” SD 2 1201577 S4221F CSSD2-#10x1-1/2-PC-PSQ

10–16 x 2” SD 2 1298672 S4421F CSSD2-#10x2-PC-PSQ

#12 Self-Drill Pancake

#12 x 1” SD 2 793826 S4552F CSSD2-#12x1-PC-PSQ

#12–24 # 5 Point Pancake

12–24 x 1-1/2” SD 5 796642 S4750F CSSD5-#12X1-1/2-PC-PSQ

1/4–14 #2 Point 5/16 AF HWH

1/4–14 x 1-1/4” SD 2 798666 S5191F SD2-#14x1-1/4-HW5/16

1/4–14 x 1-1/2” SD 2 504058 S5286F SD2-#14x1-1/2-HW5/16

1/4–14 #2 Point 3/8 AF HWH

1/4–14 x 1” SD 2 798596 S5171F SD2-#14x1-HW3/8

InstallationTools: Wood application: 0-2500 rpm screw gun equipped with depth sensing nose piece. Metal application: 0-2000 rpm screw gun equipped with depth sensing nose piece.Use of impact guns or hammer drill is not recommended.

Selection


1/4-14 #2 Point

#12 Type APancake

#12 XGLow Profile

#10 Type APancake

#12-24 #5 PointPancake

#12 Self-DrillPancake

#12 XGPancake

#10 Self-DrillPancake

SFS intec, Inc. Division Construction 1045 Spring Street PO Box 6326US-Wyomissing, PA 19610

800 234 4533T +1 610 376 5751F +1 610 376 [email protected]

SFS intec, Inc. - Canada40 Innovation DriveDundas, ON L9H 7P3T +1 905 689 [email protected]

Manufacturing LocationsExeter Plant Lincoln Corporate Center, 41 Dennis Drive, Reading, PA 19606Medina Plant 5201 Portside Drive, Medina, OH 44256Wyomissing Plant 1045 Spring Street, PO Box 6326, Wyomissing, PA 19610Canada Plant 40 Innovation Drive, Dundas, ON L9H 7P3

US Service Centers: Contact Us Toll Free: 1-800-234-4533 Toll-free Fax: 888-485-4225Northeast: 1045 Spring Street, PO Box 6326, Wyomissing, PA 19610 T: 610-376-5751 F: 610-376-8551 Northern Midwest: 500 West 3rd Avenue, Durant, IA 52747 T: 563-785-4990 F: 563-785-6997 Toll-free Fax: 888-211-4211 Southeast: 675 Progress Center Ave., Unit M, Lawrenceville, GA 30043 T: 770-995-5256 F: 770-995-3782 West Coast: 2426 Port Street, West Sacramento, CA 95691 T: 916-373-9912 F: 916-373-0176 Toll-free Fax: 888-488-8332

Canada Service Center: Contact Us Toll-Free : 1-866-847-5400 Toll-free Fax: 855-858-5300 40 Innovation Drive, Dundas, ON L9H 7P3 T: 905-689-5041 F: 905-689-9474

© 2015 SFS Intec / Printed in USA Technical Changes Reserved March 2015

Technical advice and sales service

Our Technologies • Provide easier, faster & more secure working methods • Reduce supply chain costs • Minimize errors • Improve information availability

Our Technologies • Provide easier, faster & more secure working methods • Reduce supply chain costs • Minimize errors • Improve information availability

eSolutions - Supply Chain innovations are just a click awayeSolutions - Supply Chain innovations are just a click away

Job Pack

ePortal

ePost

eShop

eScan

VMI

EDI

eFormat

ePullout

Visit our website, or contact our eSolutions specialist to learn more. www.sfsintecusa.com 1-800-234-4533

clips, bearing plates and fasteners for standing … · clips, bearing plates and fasteners for...

Documents