clinical systems mounting reference guide … systems mounting reference guide (monitoring products)...

Clinical SystemsMounting Reference Guide

(Monitoring Products)

Updated:

GE HealthcareClinical Systems

Quick Reference Specifications (Complete specifications can be found in individual service manuals) Note: Due to continuing product innovations, specifications in this document are subject to change without notice.

(Power and BTU ratings are approximate and based on 110VAC)

Height Width Depth Weight Device cm(in) cm(in) cm(in) kg(lb) BTU/hr Power=Watts

Solar 8000/SolarView 8.1(3.2) 33.6(13.2) 34.9(13.7) 5.4(12) 167 50 Solar 8000M/SolarView 8.1(3.2) 35.4(13.9) 33.4(13.3) 5.6(12.3) 106 58 Solar 8000i/UnityView 8.1(3.2) 35.4(13.9) 33.4(13.2) 5.6(12.3) 100 100 Solar 9500 33.2(13.0) 34.8(13.7) 15.6(6.1) 9.0(19.8) 638 200 RAC2 11.9(4.7) 14.5(5.7) 31.2(12.3) 2.3(5.0) Depends on Modules Used RAC2A 11.9(4.7) 14.5(5.7) 34.3(13.5) 1.5(3.3) 119 35 RAC4A :w/o Power 22.9(9.0) 14.5(5.7) 33.5(13.2) 2.9(6.4) Depends on Modules Used :w/Power 22.9(9.0) 14.5(5.7) 38.4(15.1) 3.5(7.9) 238 70 PDM (Typical) 7.0(2.75) 14.6(5.75) 21.6(8.5) 1.1/1.3(2.5/2.8) 10.2 4.5 TRAM Module (Typical) 8.1(3.2) 11.4(4.5) 29.5(11.6) 2.1(4.7) 31/34 10 Discrete Module (Typical) 4.0(1.6) 11.4(4.5) 28.6(11.25) .5-1(1-2.2) Depends on Module Used DASH 3000 26.0(10.25) 28.0(11.0) 20.0(8.0) 5.5(12.0) 240max 75max DASH 4000 27.4(10.8) 29.3(11.5) 24.3(9.5) 5.5(12.2) 240max 75max DASH 5000 28.7(11.3) 30.7(12.2) 23.9(9.4) 6.4(14.0) 240max 75max Eagle 4000(Color/Mono) 32.6(12.8) 32.0(12.5) 14.1(5.6) 7.3(16.0) 240 71 DASHPort Docking Station 13.9(5.5) 27.0(10.5) 20.0(8.0) 1.95(4.3) 75 Current Flat Panel Displays: 15” GE Flat Panel Display 28.2(11.1) 37.5(14.8) 7.1(2.8) 6.0(13.2) 40max 19” GE Flat Panel Display: w/o Stand 35.3(13.9) 43.2(17.0) 7.3(2.9) 8.7(19.2) 50max w/Stand 46.6(18.3) 43.2(17.0) 25.1(9.9) 11.4(25.1) 50max 19” NEC – LCD1990SXi: w/o Stand 33.0(13.0) 40.2(15.8) 8.0(3.1) 6.3(13.8) 52 w/Stand 48.6Ave(17.0) 40.2(15.8) 24.7(9.7) 9.0(19.8) 52 20” NEC – LCD2090UXi: w/o Stand 34.0(13.4) 43.9(17.3) 8.5(3.3) 7.0(15.4) 50 w/Stand 49.1Ave(19.4) 43.9(17.3) 24.7(9.7) 9.7(21.4) 50 iPanel 33.9(13.3) 41.4(16.3) 11.5(4.5) 6.5(14.4) 257max PRN50: w/o Weighted Base 18.5(7.3) 11.6(4.6) 9.3(3.7) 1.2(2.7) 170 50 w/Weighted Base 20.4(8.0) 11.6(4.6) 9.3(3.7) 2.6(5.7) 170 50 RMM 18.5(7.3) 11.6(4.6) 11.4(4.5) 1.8(4.0) 52 15 Transport Pro: w/2 Batt 33.0(13.0) 29.3(11.5) 14.8(5.8) 3.8(8.4) 120max 15 w/TRAM 33.0(13.0) 29.3(11.5) 22.1(8.7) 7.2(15.8) 120max 60 SmartPac: w/o Batt 25.4(10.0) 31.8(12.5) 9.5(3.3) 5.7(12.7) 35 10 w/2 batt 25.4(10.0) 31.8(12.5) 13.6(4.9) 7.5(16.5) 35 10 w/1 Batt & AC Adptr 25.4(10.0) 31.8(12.5) 18.4(6.8) 7.2(16.2) 45 13.4 CIC Controller: Pro 8.0(3.2) 41.0(16.2) 33.0(13.0) 6.6(14.5) 100 100max NightShade 49.1(19.3) 21.1(8.3) 45.0(17.7) 22.9(51.0)max 1000 298max BCM 42.5(16.75) 20.0(7.9) 47.0(18.5) 13.1(29.0)max 1025 300max Unity ID 21.1(8.3) 21.3(8.4) 6.6(2.6) 1.1(2.4) 15 5 Powercom 600A UPS (600VA) 21.0(8.3) 14.0(5.5) 43.6(17.2) 13.8(30.4) Run Time = ~ 55 minutes 7-Jun-07

Fixed Wall Mt

RAC SBS

Wall Arm

Wall Channel(if required)

8000(M)(i)

PDM &/or RAC

Optnl PRN50

Std 19" - or -Optnl 25"

Flat Panel Disp

PDM onlyRAC Below

Wall Arm8000(M)(i)

Optnl PRN50

Std 19" -or-Optnl 25"

Sgl RAC only

Var Height Mt

8000(M)(i) Mt

Flat Pnl Dspl

Std 19" -or-

Opt KyPd Mt

Opt PS Hlstr

VHM Arm Optl 6" Ext

Roll Stand 15"/18" Flt Pnl 2027321-0012017534-001 (+ Keypad Holster)2022676-001

411959-001 -or-416537-006404838-012Nothing Needed, Adptr Plt is on 8000(M)(i)2028150-0022017534-001 (+ Keypad Holster)2034357-001416537-002421358-005

411959-001 -or-416537-006407349-009Nothing Needed, Adptr Plt is on 8000(M)(i)2028150-0022017534-001 (+ Keypad Holster)2022677-001 -or-RAC Mt + 2021967-001404757-005 -or-404757-005 + 405154-009421358-002 or 421358-005

(Other ConfigurationsAvailable, Call for

Further Assistance)

3.8" Cntr Top1 RAC or PDM

8000(M)(i)

Cntr Tp Starter Mtw/Dual RACs or

PDM & RAC

w/No RAC/PDM

8000(M)(i)RAC Adp Plt -or-

Solar 8000(M)(i)

Stacked Base & Dsplw/PDM or RAC SBS

(Use this Configurationto replace P/N's:

416536-004, -005, -006)

Stacked Base & Dsplw/PDM or RAC(s) Below(Use this Configuration

to replace P/N:416536-008)

Display on Top,Base, 1 RAC (or PDM) &

Writer on Pole.Also includes basket.

Optnl 25"

Generic FltPnl

411959-001 -or-416537-0062005961-0012002746-002

2017534-001 (+ Keypad Holster)

2003483-001

2024390-0012022677-001 -or-2004464-001

-or- - - - - - - - - - - - - - - - - - - - - - - - - - - - or -

-or- - - - - - - - - - - - - - - - - - - - - - - - - - - or -

-or- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - or -

Dual RACs -or-

Upgrade Plate

Ceiling Mt

2026285-001 -and- 2024390-001 +

2003706-001 +2017534-001 (+ Keypad Holster) +2027282-001 -or-2022676-001

Dual Ch Clmn

RAC Mt -or-

Flt Pnl MountKypd Mount

-AND-

Base MountBasic

System

Flat Panel Disp

Flat Panel Disp

Flat Panel Disp

Flat Panel Disp

Optnl kypd mt (8000i)






Single RACDual RACs

PDM only

PDM/RAC MtPDM

Single RAC

PDM w/RAC


PDM -or- RAC

PDM MtPDM or RAC

PDM Adp Plt

PDM & RAC

2028150-0022017534-001 (+ Keypad Holster)405263-005

2028150-0022017534-001 (+ Keypad Holster)405263-006416537-002 (Qty 1)2034357-001

2028150-0022017534-001 (+ Keypad Holster)405263-0052025420-001416537-002 (Qty 2) -or-2034357-001 + 416537-002 (Qty 1)

Optnl PDM Mt


Wl Mt - VHM

Var Height Arm

Wall Channel

Arm Extsn

Flat Pnl Dspl

9500 Mount

Sgl RAC Mt

Std 19" - or -

Optnl 25"

Roll Stand 15"/18" Flt Pnl 2027321-001

2002746-002

2005961-001

411959-001 -or-416537-006Nothing Needed, just confirm flat panel has adptr plt

Nothing Needed, included on 9500

2004464-001

2022719-001

407349-009

2022719-002

411959-001

2004465-001

2014448-001

411959-001

2004465-001

Solar 9500

Display on Top,Base & 1 RAC on Pole.Also includes basket.

DASH X000(Dash X000 = Dash

2000, 3000, 4000 & 5000)

Wl Mt Optn's

Pivot Arm

Lkg VHM Arm

19" Wl ChnlLocking VHM Arm

19" Wl Chnl

Opt RAC2A Mt

Opt RAC2A Mt(Locking Variable

Height Mount Arm)

DASH w/RAC

DASH OnlyCntr/Ped Mt

Wall Mount Options

Counter/PedestalMount Options

-or- - - - - - - - - - - - - - - - - - - - - -or-2007059-001

407349-021 (RAC2A ONLY)

Roll Stand Mt Roll Stand 900276-011

900069-072Monitor on Top,Optional RAC2A on Pole.

Also includes basket.Opt RAC2A Mt

Ceiling Mt

Non-Locking VariableHeight Mount Arm

-or- - - - - - - - - - - - - - - - - - - - - -or-

DASH Only,NO RAC2A Option.

Dual Ch Column

VHM Arm

16" 'M' Arm

8" 'M' Arm

12" 'M' Arm

- AND -Choose one ofthe following

-OR- -OR-

DASH Arm

-AND Choose One-2026285-001 2022719-001 -or-407349-009 -or-2022719-002 2014448-001

See PDM Mtg Options Page



PDM IV Pole

Wall Mt

Add'l Optn's

PDM

16" 'M' Arm

8" 'M' Arm

12" 'M' Arm-or-

-or-

Dash X000 WallMount Options

Wall Mt Components forStacked Base & Displayw/Clamp-On RAC Below

Dash X000 Accessories& Mount Options

Variable Height (VHM)WallMount Options

Non-Lock 2002746-002Locking 2014448-001

Monitoring QV Home Page 1Due to product innovations, mounts contained herein are subject to change without notice.

(Form may vary, but fit and function will generally be the same.)

15" Flt Pnl Mtg OptionsStk w/Tlt 2028150-002Rail Mt 2028150-002Counter Mt 2028150-002Vert Stk 2003706-001Pedestal Mt 2002608-001

Wall Mount Components forStacked Base & Display

w/SBS RAC

Next

M Series

VHM

VHM Wall MountComponents forSolar 8000(M) or

Solar 9500

Matrix

DASH

x000

Dash X000Pedestal Mt Options

Dash X000Ceiling Mt Option

5-Wheel Roll Stand& Options forDash X000

Transport ProMount Options

-or-

DASH

x000

PDMMount Options

Dash X000

360°

Dash X000

Optional421358-009

RAC2A/PRN502" Pole/

Wl Chnl Mt

RAC Wl Mt OptionsBlank Arm or

Pivot Arm

RAC Cntr/Pdstl MT2007059-001



NextBack

RAC Mts forVHM or M Series ArmsRac4A 2004464-001Rac2A 2004465-001

Clamp-On RACMt Options

RAC2

SingleRAC4

DualRAC4

Slr8000(M) BaseMt Options

Flush 422838-001

Solar MonitoringRoll Stands for

8000(M/i) & 9500

Solar 8000M Keypad MtGeneric - 2017534-001

VHMArms

M SeriesArms

-or-

Solar 8000(M/i) CeilingMount Options

18"/20" Flat PanelDispaly Mtg OIptions

3.8" HighCounter-Top Mount

Options

No RAC

Dual RACsSgl RAC

SBS Solar Base/RACSwing Arm Wall Mt w/WC

405867-001

Additionl 15" Flat PanelMounting Options

Pedestal Mt , Artcld Arm, Pivot Arm & Pole Mt

Flat PanelDisplay

Flat PanelDisplay

Flat PanelDisplay



CIC (Bedrock)Mounting Components

MountsBack

Flat Panel/Keyboard/Mouse & CPU WallMount Components

Major Mounting Partsfor Slr8000/8000M

Including Adapter Plates

TRAM RAC CableRelief Kit

2005655-001

PRN50 Mount Options421358-0XX

Unity ID/OctaComm/OctaNetMounts

IV Pole 418616-001Wl Mt 2028791-001

Additional RAC MtOptions for IV Pole/

Rail or Wall Mtg

Solar 7000/8000(M)Remote Control Mt Kits

Eagle 4000Univ Mounting Adptrfor Wall Mt or Rl Stnd

2018454-0011

AWH

AWH

REMOTECONTROL

m a r q u e t t e

REMOTECONTROL

m a r q u e t t e

REMOTECONTROL

m a r q u e t t e

8000

8000M

8000

7000

2021963-001Pole/Rail Clamp

(aka PRC)

2021967-001Mount PDM L-Bracket

2021968-001Mount PDM Mini Dock

2022677-001Mount PDM VHM/M-ArmDn-Post w/PRC & Brkt

2022676-001Mount PDM GCX

Rollstand/Wall Channel(incl's Pole Clmp, Wl Sld & L-Brkt)

2021969-001Mount PRCW/L-Bracket

2034357-001Mount PDM Slide

Adapter Plate

PDM Mounting Options See Notes Below

PDM Mounting Option Notes:This is a quick guide to PDM Mounting options by use:1. 2021963-001, Pole/Rail Clamp (PRC). For use on IV poles w/diameters of 19mm (.75in) to 39mm (1.5in) and 10 x 25 or 8 x 25mm equipment rails.2. 2021967-001, 'L' mounting bracket. For use w/PRC or to mount PDM with mini dock or PDM Dock (either bedside or transport). Can also be used to mount PDM side-by-side onto a RAC mount.3. 2021968-001, Mini-dock mount for PDM. Mounts PDM to 'L' bracket or Slide Adapter Plate.4. 2021969-001, Pole/Rail clamp w/'L' bracket. For use on IV poles w/diameters of 19mm (.75in) to 39mm (1.5in) and 10 x 25mm or 8 x 25mm equipment rails.5. 2022676-001, Roll stand/Wall mt for PDM. Contains mounting parts to allow PDM, w/appropriate dock, to mount to wall channel or 50.8mm (2 in) post.6. 2022677-001, 38.1cm (15in) Downpost mount w/PRC & 'L' bracket. Allows PDM to mount under any 'M' or VHM series wall arm. Does NOT work w/old rectangular style 'VB' series wall arm.7. 2034357-001, Adapter plate for PDM. Allows PDM, w/proper dock, to slide into any standard GCX 5 in mounting plate on wall arms or pedestal mounts.8. 2007059-001, Multi-Use Pedestal/Counter Mt. When used w/2034357-001 Adapter Plate, allows PDM to mount on pedestal or counter top.

IncludesCntr Mt/

Sld Plt Adptr

2034357-001Mount PDM Slide

Adapter Plate

2007059-001Multi-Use Pedestal/

Counter Mt

RAC w/PDM

Mounting optn

2021967-001

2007665-002DASH/Transport Pro

Display BedRail Hook Kit

Display

2021966-002 Notes:1. IV Pole Mount, pn 2021966-002, includes Mounting Plate w/Multiuse Pole clamp and attaching hardware.2. This mount can accommodate IV poles of 19.1mm (3/4 in) to 39 mm (1-1/2 in) diameter. It is also compatible w/Ver 1 & 2 Transport Display.u Important Note - IV pole to be furnished by customer. Suitability of the IV pole, and the base or structural member to which it is secured, to support the Transport Pro, must be determined by the customer. This style mount is recommended only for bed or chair mounted IV pole, not stand-alone IV pole.

2007665-002 Notes:1. Bed-Rail Hook Kit, p/n 2007665-002, includes formed hook, inserts and attaching hardware. Can be used w/module chute attached.

Transport Pro Mounting Accessory Options Bed Rail Hook Kit 2007665-002 IV Pole Mount Kit 2021966-002

ModuleChute

2021966-002Pole Mounting Kit

for Display orModule Chute

-or-

Dash X0002006336-001

Cable ManagementHook

2007665-002Bed Rail Hook Kit

(NOT available from GCX)

Mount Option Notes:1. Universal Rear Mount, pn 420707-001, includes rotating clamp w/attaching plate and all hardware. This mount is designed for use on head boards, foot board, side rail, IV poles and wall mounts using handle/clamp attachment.2. Bed Mount, pn 2028477-001, includes mount and installation instruction. Can be used on rails up to 2.5cm (1.0in) width.

Dash X000 Mount Options Universal Rear Mt 420707-001 Bed Mt 2028477-001

Dash X000 Accessory Options Cable Management Hook2006336-001 Bed Rail Hook Kit 2007665-002 Utility Basket 2032212-001

Accessory Notes:1. Dash Accessory Cable Management Hook, p/n 2006336-001, includes formed hook and attaching hardware.2. Dash Accessory Bed-Rail Hook Kit, p/n 2007665-002, includes formed hook, inserts and attaching hardware.3. 6" Utility Basket, p/n 2032212-001, includes 6" Basket w/Cable Mgmt, Wall Channel Slide, 2" Pole Clamps, 8-10mm x 25-40mm Rail Clamp and all attaching hardware.

420707-001Universal Rear Mt

(Clamp Rotates 90° forIV Pole Attachment)

(OptionalMountingPosition)

2032212-001Multi-Use

6" Utility Basket

Dash X000

360°

2028477-001Bed Mount

Wl ChMt

RailMt

Rl StndMt

DASH Wall Mount Options'M' Series Wall Arm w/Pivot See NotesLocking Variable Height (VHM) Arm w/Pivot 2014448-001Upgrade Plate for Non-'M' Series Wall Arms 407349-010

Notes:1. 'M' Series Pivot arm wall mount. See specific p/nfor desired length:8in; p/n 2022719-001, 12in; p/n 407349-009 or16in; p/n 2022729 -002. Arms includes mountingplate, M Series support arm and hardware.2. VHM Locking arm, pn 2014448-001 includesLocking VHM Arm, Mounting Plate w/Extension Barand attaching hardware.Note - When using the Dashport on either arm, theDashport must be modified by adding the spacer,included w/Dashport kit, between the bottom of theDashport and adapter plate.3. Either kit does NOT include optional 48.3 cm (19 in)wall channel. Order p/n 411959-001 if wall channel isrequired.4. RAC2A mount, pn 2004465-001 is optional andordered separately. See note below.Note - Depending upon the style of the wall armused (existing 'box' style or new 'M' series) selectingthe correct RAC2A mount is important. Existingarms use pn 404757-001 and new 'M' series armsuse either pn 404757-001 or pn 2004465-001.5. Maximum allowable supported weight: 13.6 kilograms (30 pounds)

39.4 cm(15.5 in)

2004465-001

OptionalRAC2A Mount

(See note 4)

OptionalRAC2A Mount

(See note 4)

Optional411959-001

48.3 cm (19 in)Seismic Wl Chnl

(See note 3)

M SeriesPivot Arm

(8", 12" or 16"See notes below)

LockingVHM Arm

Optional411959-001

48.3 cm (19 in)Seismic Wall Chnl

(See note 3)

48.3 cm(19.0 in)

15.2 cm(6.0 in)

15.2 cm(6.0 in)

15.2 cm(6.0 in)

10.2 cm(4.0 in)

132.1 TO 152.4 cm(52.0 TO 60.0 in)

FROM FLOOR

CENTERLINE

CLEARANCE (MIN)35.6 cm(14.0 in)


12.7 mm(0.5 in)

12.7 cm(5 in)

'M' Series Arm

2014448-001

20°

2014448-001Locking VHMWall Mt Arm

LockingButton

OptionalDashport(See note 2)

2022719-001 (8") =~26.7 cm (10.5 in)

or407349-009 (12") = ~36.8 cm (14.5 in)

or2022719-002 (16") =

~47 cm (18.5 in)

'M' Series Pivot Arm:8" = 2022719-00112" = 407349-009 16" = 2022719-002

407349-010(NOT for 'M'

Series Arms)

19.3 cm(7.6 in)

5.1 cm(2.0 in)

34.9 cm(13.75 in) 47.6 cm

(18.75 in)

22.0 cm(8.66 in)

22.0 cm(8.66 in)

DASH Pedestal & BedRail Mount OptionsDASH Only 2007059-001DASH w/RAC2A 407349-021

2007059-001

407349-021

~ 30.5 cm (12.0 in)Triangular Shaped Base

~7.6 cm(3.0 in)

2007059-001

u 2007059-001 Notes:1. Mount, pn 2007059-001, includes triangular Pedestal base[~30.5cm (12in)], Tilt/Swivel head w/3.2cm (1.25in)pipe, 12.7cm (5in) Mounting plate, and combinationCounter Mt/Slide Plate Adapter.2. Removing the pedestal base and installing the countermt/slide plate adapter allows the mount to be bolted to acounter top or slid into a horizontal rail.3. Mount has limited tilt and swivel.

u 407349-021 Notes:1. Mount, pn 407349-021, includes 30.5cm x 30.5cm(12in x12in) Pedestal base, Tilt/Swivel head w/10.2cm(4in) pipe, 44.45cm (17.5in) Mounting plate, RAC Adapterplate and mounting hardware.2. Mount has limited tilt and swivel.

~ 30.5 cm (12.0 in) Square x.635cm (.25in) Thick Base

~12.1 cm(4.75 in)

~44.45 cm(17.5 in)

DASH

x000

407349-021

RAC2A

DASH

x000Includes Counter Mt/Slide Plate Adapter

DASH X000 Ceiling Mt See Notes Below

DASH X000 Ceiling Mt:ALL parts ORDERED SEPARATELY. 1. This would include: 1) Dual Channel Ceiling Mount Column, p/n 2026285-001 -AND ADD EITHER- 2) 'M' Series Pivot Arm (select length); 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.1) Locking VHM Arm for DASH, p/n 2014448-001.2. The 1 1/2" diameter by 11 1/2" NPT extension pipe length is to be determined at site and is furnished by the customer.

1

8, 12 or 16"'M' Series Arm 2

-or-

Dual ChCeiling MtColumn

LockingVHM Arm

2.1

Extension PipeFurnished by Customer

(See Note 2 below)

61 cm(24 in)

112 cm(44 in)

Dash X000 5-Wheel Stand & OptionsRoll Stand w/ Adptr Plt 900276-011Optional RAC2A Mt 421358-009(May be used w/Dash X000, Dash/Eagle 1000 & Eagle 3/4000. See notes below)

900276-011 Notes:1. Rollstand, pn 900276-011, includes 5-wheel stand,post w/handle, basket and hardware.2. Can be used with Dash X000, Dash/Eagle 1000 orEagle 3000/4000 monitors. See notes below. Note 1: Dash X000 needs no additional adapter plate. Note 2: For use w/Dash/Eagle 1000, pn 407349-018needs to be ordered. Note 3: For use w/Eagle 4000, pn 2018454-001 needsto be ordered.3. Maximum allowable supported weight: 36.3 kilograms (80 pounds).

421358-009 Option Notes:1. RAC2A Mount, pn 421358-009, includes poleclamp, RAC2A mount and all mounting hardware. Roll stand NOT included.2. For use only w/RAC2A w/SAM module and onlyon 900276-011 roll stand w/Dash X000.3. Please note, 421358-009 replaces 900069-072 which has been obsoleted.

900276-011Roll Stand

Optional421358-009

RAC2A/PRN502" Pole/

Wl Chnl Mt

407349-009Wall Mount

(see note 2)

Clamp-onRAC Mt,Single or

Dual RAC's(see note 5)

-Optional-421358-002PRN50 Mt

(see note 6)

-Optional-2003483-001Power Supply

Holster(see note 7)

Solar 8000(M/i) Wall Mount Components for Stacked Base & Display, w/PDM or RAC(s) Below Mounting Arm

Notes:1. All mounting components purchased SEPARATELY. This would include wall mt w/o wall channel(note 2), flat panel display mount (notes 3 & 7), keypad, if required, (note 4), RAC(s)/PDM mount (note 5),optional wall channel (note 2) and optional PRN50 RAC Mount (note 6).2. For wall mount starter, order pn 407349-009, wall mt w/o wall channel. To add wall channel, ifrequired, order pn 411959-001, 48.3 cm (19 in) seismic wall channel.3. Display configurations: 1) Flat Panel displays. 15" and 18" flat panels are stackable. Order Adjustable Stack mount w/independant tilt & swivel, pn 2028150-002. 2) CRT. Call for information.4. Use w/8000i requires additional mounting consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt (I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) + Generic holster mt (2017534-001).5. For PDM order pn 2022677-001. For RAC & PDM, add 2021967-001 'L' Bracket to side of RAC mount for PDM mounting. For Single RAC order pn 404757-005. For Dual RACs, add pn 405154-009 w/404757-005.6. If optional PRN50 mount is required, order either pn 421358-002 or 421358-005, depending upon use.7. If optional flat panel power supply mount is required, order pn 2003483-001, power supply holster.8. Maximum allowable supported weights: tilt-swivel head = 13.6 kilograms (30 pounds), support arm = 27.2 kilograms (60 pounds).

-Optional-411959-001

48.3cm (19in)Wall Channel

(see note 2)


PRN50 Clamp-On Mt(see note 6)

2022677-001Mount PDM Down-Post

w/Clamp & L Brktw/PDM -or- w/RAC(s) (& Optn'l PDM)

-Optional-2021967-001

PDM Mt(see note 5)

Solar8000(M/i)Style base

Keypad Holster & Mt(Required for 8000i,

see note 4)

2028150-002Adj Flat Panel DisplayMount w/Tilt & Swivel

(Requires Nothing Elsesee note 3)

Solar 8000(M/i) Wall Mount Components for Stacked Base & Display, SBS w/PDM or Single RAC On Mounting Arm

Notes:1. All mounting components purchased SEPARATELY. This would include wall mt w/o wall channel(note 2), flat panel display mount (notes 3 & 7), keypad, if required, (note 4), Adapter Plate for ONERAC, or PDM (note 5), optional wall channel (note 2) and optional PRN50 Clamp-On Mt (note 6).2. For wall mount starter,order pn 404838-012, wall mt w/o wall channel. Diagonal brace is included withwall mounts. To add wall channel, if required, order pn 411959-001, 48.3 cm (19 in) seismic wall channel.To upgrade an existing wall arm, w/tilt-swivel knob, order 404838-005 44.4 cm (17.5 in) mounting plate.3. Display configurations: 1) Flat Panel displays. 15" and 18" flat panels are stackable. Order Adjustable stack mount w/independant tilt & swivel, pn 2028150-002. 2) CRT. Call for information.4. Use w/8000i requires additional mounting consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt (I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) + Generic holster mt (2017534-001).5. Adapter Plates: For RAC, use pn 416537-002. For PDM, use pn 2034357-001.6. If optional PRN50 mount is required, order pn 421358-005, Clamp-on mt.7. If optional flat panel power supply mount is required, order pn 2003483-001, power supply holster.8. Maximum allowable supported weights: tilt-swivel head = 36.3 kilograms (80 pounds), support arm w/diagonal brace = 49.9 kilograms (110 pounds).

404838-012Wall Mount

(see note 2)


PRN50 Clamp-On Mt(see note 6)

416537-002RAC Adapter Plt

(see note 5)

-Optional-2003483-001Power Supply

Holster(see note 7)


48.3cm (19in)Wall Channel

(see note 2)

Solar8000(M/i)Style base

2034357-001PDM Adapter Plt

(see note 5)

-or-

Keypad Holster & Mt(Required for 8000i,

see note 4)

2028150-002Adj Flat Panel DisplayMount w/Tilt & Swivel

(Requires Nothing Elsesee note 3)

w/PDM -or- w/RAC

-Optional-48.3 cm (19 in)

Seismic Wall Chnl(Ordered separately,

see notes below)

2002746-002Non-Locking

VHM Wall Mt Arm(for Flat Panel/RAC use)

Vertical PositionMounting Platefor Flat Panel

-Optional-2003483-001

Wall Chan MountedPower Supply Holster(ordered separately when

Flat Panel Disp is mounted)

Variable Height (VHM) Support Arm OptionsNon-Locking Arm for Flat Panel Use 2002746-002Locking Arm for Dash/Dashport Use 2014448-001Heavy Duty Arm w/RAC Mt Extension 2028372-001

2014448-001Locking

VHM Wall Mt Arm(for DASH use)

Horizontal Positionfor DASH X000

LockingButton

OptionalDashport

(See notes below)

2028372-001Heavy Duty

VHM Wall Mt Armw/RAC Mt Extension(for Flat Panel/RAC use)

u 2002746-002 Notes:1. Kit, pn 2002746-002 includes Non-Locking VHM Arm, Mount-ing Plate w/Standard Extension Bar and attaching hardware.2. It is recommended that the 2002746-002 Non-Locking VHMarm be used for flat panel display mounting.u 2028372-001 Notes:1. Kit, pn 2028372-001 includes Non-Locking VHM Arm,Mounting Plate w/Extended Extension Bar, RAC mountingplate w/RAC Adapter plate and attaching hardware.u 2014448-001 Notes:1. Kit, pn 2014448-001 includes Locking VHM Arm, MountingPlate w/Standard Extension Bar and attaching hardware.2. If Dash and Dashport are used together, it is recommendedthat the 2014448-001 Locking VHM arm be used.-Additional Notes:Wall mt arms do NOT include 48.3 cm (19 in) wall channel.Order optional p/n 411959-001 as required.-Optional Use Notes:1. If 2002746-002 arm is used w/15" flat panel display,order p/n 2003483-001, opt'l Power Supply Holster separately.2. If 2002746-002 arm is used with Eagle 3000, AdapterPlate, pn 413030-013 must be ordered separately.3. If 2002746-002 arm is used with Eagle 4000, UniversalMounting Adapter, 2018454-001 must be ordered.4. If either Eagle 3000 or 4000 are used for monitor/transportapplication, the 2014448-001 arm is recommended.

5.1 cm(2.0 in)

34.9 cm(13.75 in) 47.6 cm

(18.75 in)

22.0 cm(8.66 in)

22.0 cm(8.66 in)

Vertical Range of Motion

Horizontal Range of Motion

90 90

Solar 8000(M/i) Flush Wall Mounting System(all components purchased separately)

2004464-001RAC4A Mountfor VHM Arm

Optional, IfRequired,

411959-00148.3 cm (19 in)Wall Channel

(see note 4)

2005961-001VHM ArmExtension

2002746-002VHM Arm

2017534-001Flat Panel KeyPad

Holster Bracket(see note 3)

RAC or PDMor RAC w/PDM Mt

VHMArm

6 inExtension

OptionalWl Chnl

OptionalPS Holster

Slr8000(M/i)Flush Mt

KeypadHolsterBracket

5

1

2

3

4

6

7

2024390-001Slr8000(M/i)Flush Mount

Solar8000(M/i)

Style Base

Solar 8000(M/i) VHM Arm Flush Mt Notes:All mounting components purchased SEPARATELY.1. This would include (see illustration at left): 1) Solar 8000(M/i) Base Flush Mount p/n 2024390-001, 2) VHM Arm p/n 2002746-002, 3) 15.2cm (6in) VHM Arm Extension p/n 2005961-001, 4) PDM mt, 2022677-001 -or- RAC mt, p/n 2004464-001, 4.1) PDM/RAC 'L' Bracket mt, 2021967-001, 5) Keypad Holster Bracket Kit, p/n 2017534 -001 for Generic 15/18in flat panel display (also see note 3 below) -and-, 6) IF required, 48.3 cm (19 in) wall channel p/n 411959-001 (also see note 4 below) -and- 7) OPTIONAL Flat Pnl Pwr Sup Holster p/n 2003483-001.2. If PRN50 mount is required, call for options.3. *NOTE*: The Keypad Holster IS NOT included with theKeypad Bracket kit and MUST be purchased separately.For 8000M, order p/n KYPD-Cxx-Axx - or -for 8000i order I-KEYPAD-Bxx-x4. If longer wall channel required, see options listed onMajor Mounting Parts page, in rear of manual.5. Maximum allowable supported weight: VHM Arm = 13.6 kilograms (30 pounds)

Optional2003483-001Power Supply

Holster

2022677-001PDM Mountfor VHM Arm

-or-

-or-

w/RAC -or- w/PDM

4.1

2021967-001PDM 'L' Bracket


2005961-001VHM ArmExtension

2002746-002VHM Arm

Touch ScreenFlat Panel Display

Solar 9500 Flush Wall Mounting System(all components purchased separately)

VHMArm

Extension

RACMount

OptionalWall

Channel

OptionalPS Holster

RAC4

Optional, IfRequired,

411959-00148.3 cm (19 in)Wall Channel

(see note 2)

Optional2003483-001Power Supply

Holster

5

4

1

3

2

Slr 9500 VHM Arm Flush Mt Notes:All mounting components purchased SEPARATELY.1. This would include (see illustration at left): 1) VHM Arm p/n 2002746-002, 2) VHM Arm Extension (required) p/n 2005961-001, 3) RAC Mount for VHM Arm p/n 2004464-001 and, 4) IF required, 48.3 cm (19 in) wall channel p/n 411959-001 (also see note 2 below) -and- 5) OPTIONAL Flat Panel Power Supply Holster p/n 2003483-001.(*NOTE* - The 9500 comes with slide mounting attachmentfrom production, so no additional mounts are required.)2. If longer wall channel required, see options listed onMajor Mtg Parts page, in rear of manual.3. Maximum allowable supported weight: VHM Arm = 13.6 kilograms (30 pounds)

Flat Panel Display Mount Options (for 15"/18"/20") Adjustable Stack/Cntr/Rail Mt w/Tilt & Swivel (15"/18"/20") 2028150-002 Slr8000(M/i) Vertical Stack Mt 2003706-001 Adjustable Pedestal Mount 2002608-002 (See notes below)

2028150-002 =~31.4cm (12.4in)

2028150-002

2002608-002Adj Flat Panel Display & PSTable Mount, for use w/Solar

8000/8000(M/i) or 9500

2028150-002Slr8000(M/i) AdjustableStack Mt w/Tilt & Swivelfor Flat Panel Display.

For Stack Mt, Counter Mtor Rail Mt Applications

(Does Not include flt pnl adptr plt)

u 2028150-002 Notes:1. Adjustable Stack Mount, pn 2028150-002, includes Tilt/Swivel head, 30.5cm(12in) post, counter mt/slide plate, base plate and all attaching hardware. *NOTE*: Attaches directly to Base cover, NO Cover Plate Mount required.Will work on Slr8000/8000M/8000i and CIC Bedrock.2. Mount does not include flat panel adapter plate. If required, order either2004031-001 for 75 x 75mm VESA pattern (15" fp) or 2017532-001 for 100 x100mm VESA pattern (18/20" fp).3. Optional/As Required: pn 2003483-001 Power Supply Holster Mt. Mountson rear of adjustable collar.4. Note: Mounts, pn 2001622-001, 2001623-001, 2001631-001, 2014099-001 &2028150-001, are NO LONGER AVAILABLE and are ALL REPLACED by 2028150-002.u 2003706-001 Notes:1. Vertical Stack Mount, pn 2003706-001, consists of manual tilt/swivel head,Solar 8000 base mounting plate and attaching hardware.Flat panel adapter plate not included w/mount. See 2028158-002 Note 2 above.2. This configuration REQUIRES the following additional mounting parts:Slr8000 style Base Flush Mount, pn 2024390-001, 48.3 cm (19 in) optional Wallchannel, pn 411959-001 & if required, Optional Pwr Sply Hlstr, pn 2003483-001.All parts ordered separately.3. If keypad is to be mounted to the display, see keypad bracket 2017534-001.u 2002608-002 Notes:1. Adjustable Pedestal Mt, 2002608-002, includes 30.5cm X 30.5cm (12in X 12in)bottom plate, 25.4cm (10in) post w/height adj manual tilt/swvl plate, pwr sup holsterand handle. It also includes 10.2cm (4in) channel for mounting Solar base.The new 2002608-002 mt replaces 2002608-001, which is now obsolete.2. See 2028150-002 Note 2, above, if flat panel display adapter plate is required. cNOTE: Use w/8000i requires add'l mtg consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt(I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) + Genericholster mt (2017534-001).

Stack MountApplication

Rail MountApplication

(w/Base PltRemoved)

Optl Pwr Sply Hlstr2003483-001

Counter MountApplication

(w/Base PltRemoved)

Tilt/Swivel Headw/Adj Collar

30.5cm (12in) Post

Counter Mt/Slide Plate

Base Plate

2003706-001Solar 8000M CPU

Vertical Stack Mount(Does Not include flt pnl

adapter plate)

-or-

-or-

Additional 15" Flat Panel Display Mt Options Articulated Arm Wall Mount See Notes BelowPivot Arm Wall Mount See Notes BelowPole Mount See Notes Below Dual Flat Panel Starter 2027328-001(See notes Below)

u Articulated or Pivot Arm Configuration Notes:1. All parts ordered separately. See notes 2 or 3, below, for necessary parts.2. Articulated Arm configuration requires:407349-022; 30.5 cm x 30.5 cm (12 in x 12 in) M Series Articulated arm,optional (if required) 411959-001 48.3 cm (19 in) Wall Channel w/mtg hardwareand optional (as required) 2003483-001 Power Supply Holster.3. Pivot Arm/Flush Mt configuration requires:'M' Series Pivot Block arm, select length: 8in; p/n 2022719-001, 12in; p/n407349-009 or 16in; p/n 2022729 -002, -or- Flush Mt, p/n 2019472-001, optional (if required) 411959-001 48.3 cm (19 in) Wall Channel w/mtg hardwareand optional (as required) 2003483-001 Power Supply Holster.4. Flat Panel Display Adapter Plate is generally included w/display, when displayis purchased from GE. If adapter plt is required, order 2004031-001 for 75MMVESA mounting pattern, or 2017532-001 for 100MM VESA mounting pattern.u Pole Mount Notes:1. All parts ordered separately. Order the following:'M' Series Pivot Block arm, select length: 8in; p/n 2022719-001,12in; p/n 407349 -009 or 16in; p/n 2022729 -002, -or- Flush Mt; p/n 2019472-001,407349-027; 17.8 cm (7 in) Wall Channel w/V-Block Pole Mount Clamp withmtg hardware and Optional (as required) 2003483-001 Power Supply Holster.2. This pole mount can be used on poles with diameters from 2.5 cm (1 in)to 5.1 cm (2 in).3. Flat panel display Adptr Plts are usually included w/display. See note 4 above.PLEASE NOTE : The 6in Pivot Arm Mt, pn 420855-012 has been obsoletedand replaced by these parts.u Dual Flat Panel Mount Notes:1. Dual Flat Panel Starter Mt, 2027328-001, consists of: 61cm (24in) Cross Barw/2 - 5" Tilt/Swivel mounting plates, 5" extension and all attaching hardware.*Note* - this is only a starter mount and will require additional mountingcomponents to complete the mounting system.2. For wall mounting applications, p/n 2022717-001, 'M' series Blank Arm isrequired.

Up to5.1cm (2in)

Pole Dia

Flat PanelDisplay

Flat Panel DispAdapter Plate

(Generally includedw/Flat Panel Display.See note 4 below.)

15" Flt PnlDisplay -or-

'M' Series Arm

90

90

90

SWIVEL

SWIVEL

407349-022

90

90

SWIVEL

~61 cm(~24 in)

SWIVEL

90

SWIVEL

Wall MtChnl

Pole MtChnl

-or-

Optional411959-001

48.3 cm (19 in)Wall Channel

407349-02212x12 Articulated

Arm Wall Mt

Optional2003483-001

Pwr Sup Holstr

Articulated or PivotArm Configurations

Optional2003483-001

Pwr Sup Holstr

407349-027Pole Mt

w/7" Chnl


2022719-001 (8") =~26.7 cm (10.5 in)

-or-407349-009 (12") = ~36.8 cm (14.5 in)

-or-2022719-002 (16") =

~47 cm (18.5 in)-or-

2019472-001 Flush = ~12.7 cm (5.0 in)


Flush Mount2019472-001

-or-

Flat Panel DisplayAdapter Plate

(Generally includedw/Flat Panel Display.See Note 4 below.)

2027328-001Dual Flat PanelWall Mt Starter

2022717-00130.5cm (12in)

'M' Series Pivot-Block Blank Arm

Large Screen (18" or 20") Flat Panel Mounting OptionsWall Mount Components See NotesCeiling Mount Components See Notes

Wall Mt Options:Pivot Arm or Flush Mt

(NOT in kit form, all partsordered separately)

M Series Pivot Arm

MOUNTING FLANGE

ESCUTCHEONRING

3.8 cm (1.5 in) Dia Pipe.Length to be determinedat Site & Furnished By

CUSTOMER

FALSE CEILING

PREMANENT MOUNTING SURFACE

See Specificmounting arm

used 2026285-001

45.7 cm(18.0 in)

18"/20" FlatPanel Display

90

90

SWIVEL

SWIVEL

90

2019472-001Flush Mount

Optional411959-001


Optional2003483-001

Pwr Sup Holstr

-or-

~12.7 cm(~5.0 in)

2019472-001

90

90

SWIVEL

90

2017532-001Univ Adptr Plt

2022719-001 (8") =~26.7 cm (10.5 in)

or407349-009 (12") = ~36.8 cm (14.5 in)

or2022719-002 (16") =

~47 cm (18.5 in)

'M' Series Pivot Arm:8" = 2022719-001

12" = 407349-009 16" = 2022719-002

FlushMt

8, 12 or 16"'M' Series

Arm

VHMArm

-or-

-or-


18"/20" FlatPanel Display

2017532-001Univ Adptr Plt

~6.3 cm(2.5 in)

Ceiling Mt Options:Pivot Arm, VHM Arm or Flush Mt

(NOT in kit form, all partsordered separately)

Mounting Notes (All parts ordered separately)1. This would include: 1) Flush Mt, 2019472-001 -OR- 1.1) 'M' Series Pivot Arm (select length): 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.3) VHM Arm, 2002746-002. -AND ADD (if required)- Universal 75MM Adapter Plate, 2004031-001 -or- Universal 100MM Adapter Plate, 2017532-001-and (as required)- -Optional- 48.3 cm (19 in) Wall Channel, 411959-001. -Optional- Power Supply Holster, 2003483-001.

Mounting Notes (All parts ordered separately)2. This would include: 1) Dual Channel Ceiling mt column, 2026285-001 -AND- Add choice of display mount: 2.1) Flush Mt, 2019472-001 -OR- 2.2)'M' Series Pivot Arm (select length): 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.3) VHM Arm, 2002746-002. -AND ADD (if required)- Universal 75MM Adapter Plate, 2004031-001 -or- Universal 100MM Adapter Plate, 2017532-001-and (as required)- -Optional- Power Supply Holster, 2003483-001.3. The 1 1/2" diameter by 11 1/2" NPT extensionpipe (needed for ceiling mounting) length is to bedetermined at site and is furnished by the customer.

1

2.3

2.2

2.1 1

1.1

2004004-001Keypad Bracket Kit for

Mounting to Original OLDERPlanar Flat Panel Display ONLY. (includes bracket, bushing & screws)

For current Planardisplay, use Generic Kit.

2003416-001Keypad Bracket Kit for

Mounting to Original OLDERTotoku Flat Panel Display ONLY.

(includes R/L bracket, bushing,back plate and screws)

For current Totokudisplay, use Generic Kit.

Keypad Holster Mt for Non-Specific Displays Generic Bracket Kit 2017534-001 Original 15" Planar Specific Bracket Kit See Notes Original 15" Totoku Specific Bracket Kit See Notes

Generic 15/18"Flat Panel

Display

2017534-001Generic Keypad Bracket Kitfor Mounting to 15 or 18"

Flat Panel Display(includes adapter plt,bracket, backing plt

& screws.DOES NOT includeKeypad or Holster)

ORIGINAL Older Displays

Keypad Holster Mount Notes:1. Generic keypad Bracket Kit, pn 2017534-001, is for mountingonto a 'Generic' flat panel displays utilizing the standard VESAmounting patterns, and consists of a flat panel adapter plate,keypad holster bracket, holster backing plate and mtg hardware.See Note 2 for keypad holster ordering information.(The 2017534-001 Generic kit requires that the flat panel displaycontains either the 75mm or 100mm VESA mounting patterns.)2. *IMPORTANT NOTE*: The keypad and holster ARE NOTincluded with any bracket kit and MUST be ordered separately,as required;For 8000/8000M order KYPD-C??-?XX for keypad & holster -or-For 8000i order I_KEYPAD-B??-? for keypad & holster -or-�For Original Planar & Totoku, holster, p/n 2001244-002, may berequired.3. Original Planar : Bracket Kit, pn 2004004-001, is ONLY for mounting onto the ORIGINAL Planar 15" flat panel display (willnot work on CURRENT release Planar displays), & consists ofbracket, bushing and mounting hardware. See Note 2.4. Original Totoku : Bracket Kit, pn 2003416-001, is ONLY formounting onto the ORIGINAL Totoku 15" flat panel display (willnot work on CURRENT release Totoku displays), & consists ofbrackets, back plate, bushing and mtg hardware. See Note 2.

Keypad & Holster,Ordered Separately

(See notes below)

Planar

Totoku

Flush Base Mount OptionGeneric Flush Base Mount (Replaces 422838-001) 2024390-001

2024390-001 Notes:1. Generic Flush Base Mount, p/n 2024390-001, consists of flush mounting piece, wall channel slide and wall channel stop.2. DOES NOT include wall channel, which is optional & ordered separately. If wall channel is required, order p/n 411959-001. Longer, or shorter, wall channels are available, call for information.3. Mount can be used with Solar 8000(M/i) and CIC Bedrock host style bases.4. This mount replaces 422838-001, which is obsolete.

OptionalWall Chan(see note 2)

2024390-001Generic Flush Base Mt

(DOES NOT include Wall Channel)

Solar 8000(M/i)/9500 Dual Channel Roll Stand 2027321-001 for Base/Flt Pnl Disp/RAC/PRN50 & Basket

2027321-001 Dual Channel Roll Stand Notes:1. Roll Stand, pn 2027321-001, is suitable for use w/Solar 8000(M/i)or 9500 and includes 5-wheel dual-channel stand w/handle & basket,5" Tilt/Swivel plate w/LCD handle for flat panel display, RAC mount,Solar base mount (not required for 9500), PRN50 mount and allnecessary mounting hardware.*Note* - Optional PDM mt, p/n 2022676-001 required for PDM use.Mount is optional and ordered separately.*Note* - Adapter plate for flat panel display is generally includedw/flat panel display (see Note 5 for additional information).This roll stand is a direct replacement for 900276-028.2. Use of remote keypad & holster may require additional mountingconsideration. See notes below:u 8000M may require keypad & holster (KYPD-Cxx-xxx) & genericmount (2017534-001) -or- u 8000i may require; for 8000i 15" med grade flat panel use 8000ikeypad, holster & 8000i holster mt (I-KEYPAD-Cxx-x) -or- for use w/generic 15"/18"/19" flat panel, use 8000i keypad & holster(I-KEYPAD-Bxx-x) plus Generic holster mount (2017534-001).3. If Unity ID use is required, order optional 2028791-001 Unity ID mt.4. The distance between the center of the roll stand and the nearestvertical surface varies for each site. Allow for cable clearence andaccess.5. If the customer provides their own flat panel displays, and requiresadapter plates, order the following optional adapter as required:75mm VESA mounting pattern = 2004031-001 -or-100mm VESA mounting pattern = 2007532-001

66.0 cm(26 in)

134.6 cm(53 in)


for:

Solar 8000(M/i) -or- Solar 9500

Keypad/Holster & Mt(Required for 8000i,May be required for8000M. See note 2)

-or-

Optional2022676-001PDM Mount

(ordered separately)

5

5

Dual Channel Ceiling Mount Column Options Basic Solar 8000(M/i) System See Notes Below Solar 8000(M/i) System w/'M' Series or VHM Arms See Notes Below

'M' Series -or- VHM Arm System:All parts ORDERED SEPARATELY. 1. This would include (reference #'s above): 1) Dual Channel Ceiling Mount Column, pn 2026285-001-AND ADD EITHER- 2) 'M' Series Pivot Arm (select length); 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.1) VHM arm, 2002746-002-AND ADD- 3) Keypad Holster Bracket, 2017534-001 -and-, 4) PDM mt, 2022677-001 or RAC mt, 2004464-001 -and- 5) Solar base Flush Mt, 2024390-001.2. Keypad & holster ordered separately.3. The 1 1/2" diameter by 11 1/2" NPT extension pipe (needed for ceiling mounting) length is to be determined at site and is furnished by the customer.

Basic System:All parts ORDERED SEPARATELY. 1. This would include (reference #'s above): 1) Dual Channel Ceiling Mount Column, pn 2026285-001 -AND ADD- 2) Solar base Flush Mt, 2024390-001 -and-, 3) Flat Panel to 8000(M/i) Base Vertical Stack Mt, 2003706-001 -and-, 4) Keypad Holster Bracket, 2017534-001 -and-, 5) PDM mount, 2022676-001 -or- RAC mount, 2027282-001.2. Keypad & holster ordered separately.3. The 1 1/2" diameter by 11 1/2" NPT extension pipe (needed for ceiling mounting) length is to be determined at site and is furnished by the customer.

12


1

2.1

Solar 8000(M/i)'M' Series or VHM

Ceiling MountSystem Options


4

-or-

2

Solar 8000(M/i)Basic Ceiling MtSystem Options

3

4

'M' ArmSystem

VHM ArmSystem

4

3

3

0.35 RADIANS(20°)

22.9 cm (9.0 in),44.45 cm (17.5 in) or

63.5 cm (25.0 in)

90°

90°

SWIVEL

3 . 8 c m( 1 . 5 i n )

M O U N T I N G F L A N G E

7 . 6 c m( 3 . 0 i n )

1 0 . 2 c m( 4 . 0 i n )

6 . 4 c m( 2 . 5 i n )

5 0 . 8 c m( 2 0 . 0 i n )

M I N I M U M

9.5 cm(3.8 in)

Slr8000(M/i) 9.5 cm (3.8 in) High Counter-Mount Options Base & Display w/No RAC 405263-005 Base & Display w/1 RAC 405263-006 Base & Display w/2 RACs (405263-007 Replacement) See Note 3

COUNTER MOUNTPEDESTAL

9.5 CM (3.8 IN)

22.9 cm (9 in)MOUNTING

PLATE

Base & Displayw/No RAC

405263-005

44.5 cm (17.5 in)MOUNTING

PLATE


9.5 CM (3.8 IN),

416537-002*RAC ADAPTERPLATE(Ordered Separately)

Base & Displayw/1 RAC

405263-006

2025420-00163.5 cm (25 in)

Upgrade Plt(Ordered Separately)

416537-002RAC ADAPTERPLATES (x2)(Ordered Separately)


9.5 CM (3.8 IN)(From 405263-005)

Base & Displayw/2 RACs

See Notes Below

405263-00X Notes:1. Base & Display, NO RAC, 405263-005 Kit, includes: 22.9 cm (9 in)mounting plate, counter-mount pedestal, and hardware.See Note 4 for information about display mounting.2. Base & Display, w/1 RAC, 405263-006 Kit, includes: 44.5 cm (17.5 in)mounting plate, counter-mt pedestal, and hardware. NOTE: RAC Adapterplate, pn 416537-002, MUST be ordered SEPARATELY when used with405263-006 mount. See Note 4 for information about display mounting.3. Base & Display, w/2 RACs, 405263-007 Replacement: Stacked Base &Display w/Dual RACs mount, pn 405263-007, has been obsoleted andreplaced by the following SEPARATE p/n's: 405263-005 Counter Mount,2025420-001 63.5 cm (25 in) Upgrade Plate and qty two (2) 416537-002RAC Adapter Plates. See Note 4 for information about display mounting.4. IMPORTANT - Display mt ORDERED Separately: order pn 2028150-002.5. Use w/8000i requires aditional mtg consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt(I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) +Generic holster mt (2017534-001).6. Maximum allowable supported weight: 31.8 kilograms (70.0 pounds).7. The distance between the center of the counter mount and the nearestvertical surface varies for each site. A distance of approx 50.8 cm (20.0 in)minimum is recommended for cable clearance and access.

For Stacking Base &Dspl, Must Order Dsplmt separately. Flt Pnlsrequire 2028150-002

For Stacking Base &Dspl, Must Order Dsplmt separately. Flt Pnlsrequire 2028150-002.See Note 5 for 8000i

keypad mounting info.

For Stacking Base &Dspl, Must Order Dsplmt separately. Flt Pnlsrequire 2028150-002.See Note 5 for 8000i

keypad mounting info.

Must Order 2002555-001for SLr8000(M) Cover Plate

Mount (For StackingBase & 15" Display)

Separately

416537-002*RAC ADAPTERPLATE(Ordered Separately)

MOUNTINGPLATE

48.3 cm(19 in)

Wall Chnl

SWINGARM

55.9 cm(22.0 in)

48.3 cm(19.0 in)

15.2 cm(6.0 in)

15.2 cm(6.0 in)

15.2 cm(6.0 in)

10.2 cm(4.0 in)

132.1 TO 152.4 cm(52.0 TO 60.0 in)

FROM FLOOR

CENTERLINE



12.7 mm(0.5 in)

0.35 RADIANS(20°)

TILT ADJUSTKNOB

2.5 cm(1.0 in)

44.45 cm(17.5 in)

7.6 cm(3.0 in)

SWIVEL

SWIVEL

90°

90°

Side-by-Side Swing Arm Wall-Mount w/ Wall Channel 405867-001

Notes1. Kit, pn 405867-001, includes mounting plate,support arm, 48.3-centimeter (19-inch) wallchannel, and hardware.2. Important - The following parts MUST beordered separately: RAC Adapter pn 416537-002& Cover Plate Mt pn 2002555-001 for Slr8000(M).RAC can be mounted on either the right or leftside of the monitor.3. Maximum allowable supported weight: 36.3 kilograms (80.0 pounds).

(TRAM-RAC 2)24 cm (9.5 in)

(TRAM-RAC 3/4)34.3 cm (13.5 in)

Tram-RAC Clamp-On Mount OptionsSingle RAC 2/2A 404757-001Single RAC 4/4A 404757-005Dual RAC Option 405154-009

u 404757-001/-005 Notes1. Mount, pn 404757-001, is for Tram-rac 2/2A(accommodates one Tram style module only).2. Mount, pn 404757-005, is for Tram-rac 4/4A(accommodates one Tram module plus twodescrete module or one double high module) orTram-rac 3 (accommodates one Tram moduleplus one descrete module).3. Mounts include Hanger w/C-Clamp Attachmentand RAC attaching screws.4. For dual RAC's, add Optional 405154-009. See 405154-009 Notes below.5. Maximum allowable supported weight: 31.8 kilograms (70.0 pounds).

u 405154-009 Notes1. For Dual RAC mounting, add Dual RAC Option,pn 405154-009. Kit includes add-on Hanger,Joining spacer, 22.9cm (9in) Extension w/DownPost Disc, Crossmember, Channel Slide andattaching hardware.2. The added parts, Crossmember, Extensionand Channel Slide, are used with/for additionalmounting options using VHM arms, ceiling mountsor 'M' series arms.3. Maximum allowable supported weight: 31.8 kilograms (70.0 pounds).

CLAMP ONRAC MOUNTBRACKETS

31.5 cm(12.4 in)

31.8cm/12.5inW/O POWER SUPPLY

37.1cm/14.6inW/ POWER SUPPLY

31.8cm/12.5inW/O POWER SUPPLY

37.1cm/14.6inW/ POWER SUPPLY

14.7 cm

(5.8 in)

26.7 cm(10.5 in)

34.3 cm(13.5 in)

61 cm(24 in)

14.7 cm

(5.8 in)

405154-009Dual RAC Option

(can be mounted Side-By-Sideor Over-Under)

404757-005RAC 4/4A

Joining Spacer(Included w/405154-009)

404757-001RAC 2/2A

405154-009Dual RAC Option(shown side-by-side)

404757-005Clamp-On Mount(Not included w/

405154-009)

405154-009Dual RAC Option

(shown over-under)

(TRAM-RAC 2)16.5 cm (6.5 in)

(TRAM-RAC 3/4)26.7 cm (10.5 in)

53.5 cm(21 in)

Single RAC Options(RAC2 or RAC4)

RAC Mounts for VHM or M Series Arms Single RAC4(A) 2004464-001 RAC2(A) 2004465-001 Cable Management Hooks See Notes Below

u 2004464-001 Notes:1. RAC4 Mount, pn 2004464-001, includes wraparound RAC mount, 22.9 cm (9 in) extensionbar, lower swivel fitting and all attaching hardware.*NOTE* - Because of VHM arm weight restrictions,only one (1) RAC may be mounted from VHM arm.Dual RACs can only be used on 'M' Series or olderPoly Mount series wall arms.2. Mount for use with both VHM or 'M' series arms.

u 2004465-001 Notes:1. RAC2 Mount, pn 2004465-001, includes wrap around RAC mount, 22.9 cm (9 in) extensionbar, lower swivel fitting and all attaching hardware.*NOTE* - When used w/Dash, use only w/LockingVHM Arm, pn 2014448-001.2. Mount for use with both VHM or 'M' series arms.

u Cable Mgmt Hook Notes:1.420807-001 Straight hook or 420808-001 90° hook.See dimensions at left. Hooks are plastic and areattached using double sided tape.

2004464-001RAC4A Mount for VHM Arm(for use w/Slr8000(M/i) & Slr9500

& Single Flat Panel Display)

2014448-001Locking

VHM Arm


(for use w/Dash onLOCKING VHM Arm)

51.4 cm(20.25 in)

39.4 cm(15.5 in)

2002746-002Non-Locking

VHM Arm

2004464-001for RAC4A

2004465-001for RAC2A

M SeriesArm

RAC Mount forM Series Arm

(RAC4A Mt Shown)

420807-001Straight Cable

Hanger

420808-00190° CableHanger

7.6 cm(3 in)

5.1 cm(2 in)

2.5 cm(1 in)

5.1 cm(2 in)

2.5 cm(1 in)

6.3 cm(2.5 in) 5.1 cm

(2 in)

416537-002Single RACAdapter Plt

2022717-001 =~30.5 cm (12 in)

or2022718-001 =

~30.5x30.5 cm (12x12in)

TRAM RAC Wall Mount Options 'M' Series 12" Blank Pivot-Block Arm 2022717-001 'M' Series 12" X 12" Articulated Blank Arm 2022718-001 'M' Series Pivot-Block Wall-Mt System See Notes

u Blank Arm Notes:1. Blank Pivot arms, pn 2022717-001 (30.5 cm/12 in) or12 X 12 Articulated Blank arm, p/n 2022718-001 DONOT include wall channel.If wall channel is required, order optional pn 411959-001.2. Can be used with either 'M' series RAC mounts orstandard clamp-on RAC mounts. These arms replacethe following obsolete arms: 404757-003, -004 & -007.3. For Dual RACs, add 405154-009 Dual RAC option.4. Maximum allowable supported weight: 31.8 kilograms (70 pounds).

u RAC Pivot Block Wall Mt System Notes:1. All parts are purchased SEPARATELY. Order thefollowing:M Series pivot arm w/tilt & swivel mounting plate, selectlength: 8in; p/n 2022719-001, 12in; p/n 407349-009 or16in; p/n 2022729 -002, Single RAC 416537-002 or DualRAC 2021024-001 adapter plate.If wall channel is required, order optional pn 411959-001.2. Maximum allowable supported weight:13.6 kilograms (30 pounds).

18.7 cm(7.4 in)

48.3 cm(19.0 in)

15.2 cm(6.0 in)

15.2 cm(6.0 in)

15.2 cm(6.0 in)

10.2 cm(4.0 in)

132.1 TO 152.4 cm(52.0 TO 60.0 in)

FROM FLOOR

CENTERLINE



12.7 mm(0.5 in)

2.5 cm(1.0 in)

14.7 cm (5.8 in)Single RAC

or~30.5 cm (12 in)

Dual RACs

OPTIONAL411959-001


20°

90°

90°

SWIVEL

SWIVEL

2022717-00130.5 cm (12 in)

'M' SeriesPivot-BlockBlank Arm

Pivot-Block ArmWall Mount System

(all parts orderedseparately)

SingleRAC

DualRACs

2021024-001Dual RACAdapter Plt

or

OPTIONAL411959-001


2022718-00130.5x30.5 cm (12x12 in)

'M' Series ArticulatedBlank Arm

Blank ArmWall Mount System

(all parts orderedseparately)

2022719-001 (8") =~26.7 cm (10.5 in)

or407349-009 (12") = ~36.8 cm (14.5 in)

or2022719-002 (16") =

~47 cm (18.5 in)

'M' SeriesPivot Arm:

8" = 2022719-00112" = 407349-009 16" = 2022719-002

(Single or DualRACs)

Counter Top/Pedestal Mount for TRAM RACMulti-Use Pedestal Mount 2007059-001

2007059-001 Notes1. This Multi-Use mount is for use with DASH X000, DASHPort, Single or Dual RACs (requires separate Adapter Plate,see Note 3) and Eagle 3000 (requires separate AdapterPlate, see Note 4).It can be used as a stand-alone pedestal mount, bolt oncounter mount or slide-in mount for use with anesthesiamachine top mounted channel.2. Mount, pn 2007059-001, includes triangular Pedestal base[~30.5cm (12in)], Tilt/Swivel head w/3.2cm (1.25in)pipe, 12.7cm (5in) Mounting plate and combination CounterMt/Chan Slide Plate Adapter.3. For use with RAC(s), order the following Adapter Plates:Single RAC - 416537-002 Adapter Plate, orDual RAC - 2021024-001 Adapter Plate.4. For use with Eagle 3000, order 413030-013 Eagle 3000Adapter Plate separately.5. This Multi-Use mount is to be used in place of thefollowing p/n's: 407349-012, 900069-044, 900069-050,900069-065, 900069-066 and 2002720-001.

~ 30.5 cm (12.0 in)Triangular Shaped Base

7.6 cm(3.0 in)

Counter Mt/ SlidePlate Adapter

(included with 2007059-001)

2007059-001Multi-Use Pedestal

2007059-001

- or -

Optional RACAdapter Plates

Optional416537-002 SingleRAC Adapter Plate

Optional2021024-001 DualRAC Adapter Plate

IV PoleSee Note 4

u2027282-001 Notes: 1. Kit, pn 2027282-001, includes "L" Mounting Bracket, multiuse Pole/Rail Clamp, Wall Channel Slide, Channel Stop and all mounting hardware. (Please note: The 2027282-001 mount combines and replaces mounts 900069-062 & 900069-069.) 2. Pole/Rail Clamps can accommodate the following: IV pole diameters of 19 mm (.75 in) to 39 mm (1.5 in) and equipment rail dimensions of 10 x 25 mm or 8 x 25 mm. 3. Maximum allowable supported weight:13.6 kilograms (30 pounds). 4. IV pole furnished by customer. Suitability of the IV pole, and the base or structural member to which it is secured, to support the equipment, must be determined by the customer.

13.65 cm(5.375 in)

20.8 cm(8.1875 in)

Additional RAC Mounts Multi-Use IV Pole/Rail/Wall Channel RAC Mount 2027282-001

IV PoleUse

RailUse

WallChannel

Use

Verticalfor Rail Use

Horizontalfor IV Pole

Use

-or-

PRC(Post/Rail Clamp)

Wall ChnlUse

Use forIV Pole

Attachment

Use for RailAttachment

2027282-001MultiUse RAC Mount

for IV Pole, Rail or Wall Mtg

Bracket

Cable Clampsw/screws

2005655-001Cable Relief Kit

Tram RAC Cable Relief Kit 2005655-001 Cable Mgmt Hooks See Notes below

u RAC Cable Relief Kit Notes:1. Kit, p/n 2005655-001, consists of a bracketw/attaching screws, cable clamps w/screwsand instructions.2. Kit can be used on RAC 2, 2A, 4 & 4A.

u Cable Mgmt Hook Notes:1.420807-001 Straight hook or 420808-00190° hook. See dimensions at below.Hooks are plastic and are attached usingdouble sided tape.


Hanger

420808-00190° CableHanger

7.6 cm(3 in)

5.1 cm(2 in)

2.5 cm(1 in)

5.1 cm(2 in)

2.5 cm(1 in)

6.3 cm(2.5 in) 5.1 cm

(2 in)

421358-002Clamp-On RACMount Adapter

421358-001Slide Plate Mt

421358-005Clamp-On Mt

421837-002Weighted Pedestal

(Not AvailableFrom GCX)

PRN50/RMM Mounting Options 421358-00X 421837-002

421358-00X Notes:1. Due to continuing product upgrade/refinement process, thefollowing mounts have been obsoleted. Replacements, whenavailable, are indicated below:Obsolete 421358-003 & replace w/421358-009Obsolete 421358-004 & replace w/421358-009Obsolete 421358-006 w/NO ReplacementObsolete 421358-007 w/NO ReplacementObsolete 421358-008 & replace w/421358-009Obsolete 421358-010 & replace w/421358-009 + 407349-026Obsolete 421358-011 & replace w/421358-009Obsolete 421358-012 & replace w/421358-001 + 2002720-001

Anesthesia Mach Top Mt421358-001 + 2002720-001(Also requires anesthesiamachine top channel mt)

(2002720-001)

-or-Forward facing

-or-Side facing

WallChnlSlide

5.1 cm(2in) Pole

Clamp

421358-009PRN50/RAC2A

Wall Chnl/2" Pole Mt

10.2 cm(4 in)

21 cm(8.3 in)

2028791-001ADAPTER PLT

w/Wall Slide(Includes Chnl Stop

& Screws)

Optional WALLCHANNEL(NOT included

w/2028791-001)See Notes Below

UNITY ID/OCTACOMM/

OCTANET

UNITY ID/OCTACOMM/

OCTANET

13.7 cm(5.4 in)

21 cm(8.3 in)

IV POLE

IV POLEMOUNTBRACKET

418616-001IV Pole Mt

Unity ID/OCTACOMM/OCTANET Mounts IV Pole Mount 418616-001 Wall Mount Adapter Plate Kit 2028791-001

u 418616-001 Notes: 1. IV Pole Mount kit, pn 418616-001, includes IV Pole Mounting Bracket and all mounting hardware.u 2028791-001 Notes: 1. Adapter Plate kit, pn 2028791-001, includes adapter plate, molded wall slide, channel stop and all mounting hardware. 2. Adapter plate kit DOES NOT include optional wall channel. If wall channel required, order: for 7in (17.8cm) wall chnl, p/n 2030517-001 -or- for 19in (48.3cm) wall chnl, p/n 411959-001. 3. The 2028791-001 mt & optional wall channel replaces both 418616-002 & 418616-003. 4. *CAUTION* - Always mount the Unity ID/ Octacomm/Octanet in a vertical position.

418616-001

2028791-001

OptionalWALL

CHANNEL(NOT included

w/2028791-001)

FlatPanel/KeyBoard/Mouse/CPU Wall Mounting ComponentsPivot Arm Starter Kit 2021272-001Variable Height (VHM) Arm Starter Kit 2021271-001CPU Mount (Select Width. See note below) 2021474-00X(Note: Wall Channel Ordered Separately for all kits)

2021272-00130.5 cm (12 in) Pivot

Arm Wall Mt Starter Kit2021271-001

VHM ArmWall Mt Starter Kit

2021272-001 Pivot Arm Starter Kit Notes:1. All mounting components, except wall channeland CPU mount, are contained in this kit.2. The 2021272-001 Pivot Arm starter kit includes:30.5 cm (12 in) Pivot Arm with Ergo Bracket mountfor Flat Panel & Keyboard and 52.7 cm (20.75 in)Keyboard Tray w/Slide Out (right or left side) MouseTrays.3. Wall channel ordered separately and availablein four (4) different lengths. Please consider if CPUwill use same wall channel or separate one:411959-001 = 48.3cm (19in), 416537-006 = 63.5cm(25in), 416537-012 = 78.7cm (31in) or 416537-025 =109.2cm (43in).4. Maximum allowable supported weight: Pivot Arm = 13.6 kilograms (30 pounds)

2021271-001 VHM Arm Starter Kit Notes:1. All mounting components, except wall channeland CPU mount, are contained in this kit.2. The 2021271-001 Variable Height (VHM) starterkit includes:VHM Arm with Ergo Bracket mount for Flat Panel& Keyboard and 52.7 cm (20.75 in) Keyboard Trayw/Slide Out (right or left side) Mouse Trays.3. Wall channel ordered separately and availablein four (4) different lengths. Please consider if CPUwill use same wall channel or separate one:411959-001 = 48.3cm (19in), 416537-006 = 63.5cm(25in), 416537-012 = 78.7cm (31in) or 416537-025 =109.2cm (43in).4. Maximum allowable supported weight: VHM Arm = 9.1 kilograms (20 pounds)

VHM Armw/Flat Panel Mt &

Keyboard Tray

15/18/20"Flat Panel

Display

Wall Chnl(See Notes)15/18/20" Flat

Panel Display

12" 'M' Series PivotArm w/Flat Panel Mt

& Keyboard Tray

Wall Chnl(See Notes)

CPU Mount

CPU Mount Notes:1. CPU mounts are available in three (3) adjustable widths:2021474-001 for CPU boxes 7.6 to 11.4 cm (3 to 4.5 in) -or-2021474-002 for CPU boxes 11.4 to 17.8 cm (4.5 to 7 in) -or-2021474-003 for CPU boxes 17.8 to 24.1 cm (7 to 9.5 in).*Note* Mount may also be used to mount similiar sized UPS.�2. Wall channel, if required is ordered separately. Or, mayuse the same channel used for the starter wall mount kits.See wall mount starter kits below for available lengths.3. Maximum allowable supported weight: 2021474-001 = 11.3 kgs (25 lbs), 2021474-002 & 2021474-003 = 18.1 kgs (40 lbs)

Wall Chnl(See Notes)

12" 'M' Series PivotArm w/Flat Panel Mt

& Keyboard Tray:2021272-001

'M' Series Pivot Arm:8" = 2022719-001

12" = 407349-009 16" = 2022719-002

Base Mt Options

12" x 12"Articulated Arm:

407349-022

Display Only, No Keyboard

Display w/Keyboard & Mouse

Flush Mt Arm:2019472-001

VHM Arm:2002746-002

Optional Wall Chnl:19" = 411959-00125" = 416537-00631" = 416537-01243" = 416537-025

VHM ArmArm w/Flat Panel Mt

& Keyboard Tray:2021271-001

Optional Wall Chnl:19" = 411959-00125" = 416537-00631" = 416537-01243" = 416537-025

Flush Base Mt:2024390-001

CPU BaseWall Mount

CIC (Bedrock) Wall Mounting Components (for Nightshade, or other computer products, see previous page)

Please note, components purchasedseparately, NOT in kit form.

Flat Panel Display Mt Options(With or W/o Keyboard/Mouse)

Optional Wall Chnl: 7" = 2030517-00119" = 411959-00125" = 416537-00631" = 416537-01243" = 416537-025

-or-

-or-

-or-

-or-

Flat Panel DispAdapter Plates

75mm VESA Adapter Plate(for 15" Flt Pnl Dspl)

GE P/N = 2004031-001GCX P/N = FLP-0001-17

100mm VESA Adapter Plate(for 18"/20" Flt Pnl Dspl)GE P/N = 2017532-001

GCX P/N = FLP-0002-17

No Mount

Floor Mount:2031722-001

CPU BaseFloor Mount

RAC2/2A/4/4A Adapter PlateGE P/N = 416537-002GCX P/N = ME-0016-16

Wall Channels:7 in (17.8 cm)

GE P/N = 2030517-001GCX P/N = WC-0002-01

19 in (48.3 cm)GE P/N = 411959-001

GCX P/N = WC-0002-0525 in (63.5 cm)

GE P/N = 416537-006GCX P/N = WC-0002-07

31 in (78.7 cm)GE P/N = 416537-012

GCX P/N = WC-0002-0943 in (109.2 cm)

GE P/N = 416537-025GCX P/N = WC-0002-12

Swivel Only Wall Mount,w/15" Arm & 9" Mounting Plate

GE P/N = 416537-005GCX P/N = ME-0031-03

Side-By-Side Wall Mount,w/15" Arm & 17.5" Mounting Plate GE P/N = 404838-012 w/o WC = 404838-005 Upgrade

Cover Plate MountGE P/N = 2002555-001

Standard Wall Mount,w/15" Arm & 9" Mounting PlateGE P/N = 404838-008 w/o WC

= 407349-010 Upgrade

Adjustable Flt Pnl StackMount w/Tlt & Swvl

GE P/N = 2028150-002GCX P/N = ME-0031-13

Major Parts for Mounting Solar 8000(M/i),Including Still Active Adapter Plates (Note: Other Manufacturers Adapters May Be Available Directly From GCX)

Wall Mount - Mtg PltUpgrade Kit w/Diag Brace

(For Square VB Series Arms Only) 407349-010 = DASH or Solar 8000(M/i)

404838-005 = SBS Solar 8000(M/i)/RAC

407349-0107.6 in (19.3 cm)

404838-005 17.5 in (44.5 cm)

Dual RAC Adapter PlateGE P/N = 2021024-001GCX P/N = ME-0017-17

CRT Adapter Plates:19/20/21" Displays

(15" & 17" CRT Adapter Plates:Call for Availability)

Flat Panel Display (Various Sizes) Adapter Plates

75mm VESA Adapter Plate(for 15" Flt Pnl Dspl)

GE P/N = 2004031-001GCX P/N = FLP-0001-17

21" Sony CPD-G520PMonitor Adapter Plate

GE P/N = 2010191-001GCX P/N = SY-0116-16

100mm VESA Adapter Plate(for 18"/20" Flt Pnl Dspl)GE P/N = 2017532-001

GCX P/N = FLP-0002-17

'M' Series Wall Armw/Pivot Arm & 5" Mounting Plate

8": GE P/N = 2022719-001GCX P/N = WMM-0002-0112": GE P/N = 407349-009GCX P/N = WMM-0002-0216": GE P/N = 2022719-002GCX P/N = WMM-0002-03

Vertical

Horiz


Hanger 420808-00190° CableHanger

Utility basket, Wall/2in RlStndPost/8-10mmX25-40mm Rail

GE P/N = 2032212-001GCX P/N = GEM-0001-16

Wl ChMt

RailMt

Rl StndMt

Eagle 4000 Universal Mounting Adapter 2018454-001(used to adapt Eagle 4000 for most mounting applications)

Wall MountStyle Applications

Roll StandStyle Application


(Required &Ordered

Separately)

-or-

Subplate

Mount PlatePositionedVertically

Mount PlatePositioned

Horizontally

Mtg AdapterPlate Only

Configuration

-or-

MountingAdapter

17.9 cm(6.9 in)Post

2018454-001 Notes:1. Universal Mounting Adapter, pn 2018454-001, includesSubplate, 17.5 cm (6.9 in) Polyquip Post, Mounting Adapterand Adapter Plate w/Clamp.u Wall mounted applications (wall arm ordered separately):for horizontally orientated mounting applications use thecomplete Subplate w/Post & Mounting Adapter and AdapterPlate w/Clamp configuration. -or-for vertically orientated mounting applications, separate theMounting Adapter from the Subplate w/Post and attach theMounting Adapter directly to the back of the Eagle 4000.The Mounting Adapter Plate is the only part used in thisconfiguration.u Roll Stand mounted applications (roll stnd ordered separately):REQUIRES 900276-011 roll stand. Use the complete Subplatew/Post & Mounting Adapter and Adapter Plate w/Clamp configuration w/roll stand.

2018454-001Universal Mounting

Adapter parts

ClampAdapter

Plate

PoleClamp

Adptr Pltw/Clmp and

Subplatew/UP Post &

Mtg AdptrConfiguration

Adptr Pltw/Clmp and

Subplatew/UP Post &

Mtg AdptrConfiguration

Doublesided tape

Display MountConfiguration

Hangar MountConfiguration

Wall MountConfiguration

"L"bracket

Remote Control Mount Kit Options Solar 8000 405110-005Solar 8000M/i 2013770-001

Solar 8000 Notes:1. Kit, pn 405110-005, includes remote control holder assembly, hangar adapter w/screws, monitor "L" bracket w/screws & double sided tape, and round spacers, wall anchor inserts & screws.2. The mounting kit includes parts to allow the Solar 8000 remote control holder to be wall mounted, display mounted or DDW hangar mounted.3. See 2013770-001 for Solar 8000M/i use.

Solar 8000M/i Notes:1. Kit, pn 2013770-001, includes remote control holder assembly and mounting hardware kit.2. The mounting hardware kit includes parts to allow the Solar 8000M/i remote control holder to be mounted directly to the wall, onto a display or onto a GCX wrap-around RAC mount.3. See 405110-005 for Solar 8000 use.

Remote ContHolder

Hardware Kit

405110-005Solar 8000 Remote(See 2013770-001 for

Solar 8000M/i)

2013770-001Solar 8000M/i Remote

(See 405110-005 forSolar 8000)

REMOTECONTROL

m a r q u e t t e

REMOTECONTROL

m a r q u e t t eREMOTECONTROL

m a r q u e t t e

Wall MountConfiguration

RAC Hangar MtConfiguration

GE HealthcareClinical Systems

g

clinical systems mounting reference guide … systems mounting reference guide (monitoring products)...

Documents