client dwh-lp project name type ty lowprofile industrial ... · the dwh-lp industrial vapor tight...
TRANSCRIPT
Low-Profile Industrial/Vapor Tight LEDDWH-LP
Client:Project Name:
Order #:Type: Qty:
Rev Date: 08/06/18 #2
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
www.getdeco.com
DescriptionThe DWH-LP industrial vapor tight combines high performance, energy-efficient LED technology with a rugged construction specificallydesigned to suit areas requiring a high level of protection against the environment, including transit areas, parking garages, cold storageunits, docks, and exterior environments where moisture or dust are a concern. To provide even deeper energy savings and applicationversatility, the DWH-LP is fitted with an integrated Hytronic tri-level motion and daylight sensor standard.
Performance DataCRI
85
CCT
4000K
Projected Lifetime
160,000 Hours (L80);80,000 Hours (L90)
Dimming
0-10V Dimming Standard,100% down to 10%
Operating Temperature
-30°C to +50°C Ambient
Safety Listing
UL Listed, Suitable for Dry, Damp, and Wet Locations
B C D E F F
UNV DM40404A
DWH L P-
Ordering Information
A
B
C
Features• Performs at 130 lm/W for stellar energy savings• 85 CRI for accurate color rendering and improved visual acuity• 0-10V Dimming Standard, dims 100% down to 10%
• UL listed for Wet Locations, IP67 rated• L80 lifetime rating of 162,000 hours
1 Delivered Lumens (4000K) - for 5000K multiply by 1.012 DLC Listed Wattage (see more info on Page 2 for models currently listed)
ULListed
FIXTURE SERIES
DWH-LP Low-Profile IndustrialVapor Tight LED Luminaire
LENGTH
4 4'
WATTAGE/LUMENS
40 40W/49001,2
CCT
40 4000K
VOLTAGE
UNV 120-277V
DIMMING
DM Dimming (0-10V)
OPTIONS
E Emergency
H Occupancy/Daylight Sensor (see page 3 for more info)
D
E
F
10 YrWarranty
Including Labor
G
AVAILA
BLE LA
TE-S
EPT 201
8
DWH-LP Low-Profile Industrial/Vapor Tight LED
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
Dimensions
Inches
Size: 2 x 2
X149.80
X23.90
X35.10
X3
X2
DLC Listed
4000K
40W X
X1
PhotometricsZonal Lumen Summary
Zone Lumens %Luminaire
0-30 1,245.4 24.5%
0-40 2,011.5 39.6%
0-60 3,507.6 69%
60-90 1,246.0 24.5%
70-100 803.1 15.8%
90-120 277.3 5.5%
0-90 4,753.6 93.6%
90-180 326.2 6.4%
0-180 5,079.9 100%
IsofootcandleModel 40W 4000K
283
283
567
850
0
567
850
1,133
1,133
1,700
1,417
1,000 180° 170°
1,700
160°150°
140°
130°
90°
100°
110°
120°
80°
70°
60°
50°
40°30°
20°10°VA:0°
- 0° H- 90° H
5 5 3 2 1 0 1 2 3 4
House Side56
5
4
3
2
1
0
1
2
3
4
5
6
Type I
Type IIType III
Type IVVe
ry s
hort
Long
Shor
t
Med
ium
Street Side
20 LUX 1 LUX0.5 LUX0.1 LUX 50% Max Cd
Distance in units of mount height (3M) Max Cd
10 LUX5 LUX
AVAILA
BLE LA
TE-S
EPT 201
8
DWH-LP Low-Profile Industrial/Vapor Tight LED
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
Hytronic Microwave Occupancy/Daylight SensorTri-level Control HF SensorHC403VRC-KDDetached Version with Daylight Monitoring and Remote Control
ApplicationsOccupancy detector with tri-level dimming control suitable for indoor use.Suitable for building into the fixture:• Office / Commercial Lighting• Classroom• WarehouseUse for new luminaire designs and installationsFeatures• 24 hour daylight monitoring dawn/dusk sensor• Tri-level dimming control based upon occupancy (also known as corridor function• 1-10V dimming control method• One-touch daylight learning via remote control• Zero crossing detection circuit reduces in-rush current and prolongs relay life• Loop-in and loop-out terminal for efficient installation• 5 Year, 50,000hr Warranty
Technical DataInput Characteristics
Technical DataInput Characteristics
Model No. HC403VRC-KD
Mains Voltage 120~277VAC 50/60Hz
Stand-by Power <0.5W
Load Ratings: --
Capacitive 400VA @ 120VAC • 800VA @ 230VAC1000VA @ 277VAC
Warming-Up 20s
Safety and EMC
EMC Standard (EMC) EN55015, EN61000
Safety Standard (LVD) EN60669, AS/NZS60669
Radio Equipment (RED) EN300440, EN301489, EN62479
Certification Semko, CB, CE , EMC, RED, RCM
Model No. HC403VRC-KD
Sensor Principle High Frequency (microwave)
Operation Frequency 5.8GHz +/- 75MHz
Transmission Power <0.2mW
Detection Range: ---
SAM5 Max. (Ø x H) 8m x 5m • Max. (Ø x H) 16m x 15m
DIP Switch Settings (HC403VRC-KD):
Sensitivity 10% / 50% / 75% / 100%
Hold-Time 5s ~ 30min (selectable)
Daylight Threshold 2 ~ 50 lux, disabled
Stand-by Period 0s ~ 1h, + (selectable)
Stand-by Dimming Level 10% / 20% / 30% / 50%
Environment
Operation Temperature Ta: -20OC ~ +60OC
Case Temperature (Max.) Tc: +80°C
IP Rating IP20
AVAILA
BLE LA
TE-S
EPT 201
8
DWH-LP Low-Profile Industrial/Vapor Tight LED
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
Sensor Main BodyVRC-KD (rectangular size)
Functions and Features:1. Tri-level Control (Corridor Function)Hytronik builds this function inside the motion sensor to achieve tri-level control, for some areas which require a light change notice before switch-off. The sensor offers 3 levels of light: 100%-->dimmed light (natural light is insufcient) -->off; and 2 periods of selectable waiting time: motion hold-time and stand-by period; Selectable daylight threshold and freedom of detection area.
2. Zero-cross Relay OperationDesigned in the software, sensor switches on/off the load right at the zero-cross point, to ensure that the in-rush current is minimised, enabling the maximum lifetime of the relay.
With sufficient natural light, the light does not switch on when presence is detected.
With insufficient natural light, the sensor switches on the light automatically when presence is detected.
After hold-time, the light dims to stand-by level if the surrounding natural light is below the daylight threshold.
Light switches off automatically after the stand-by period elapses.
Hytronik offers sensor antenna modules for different applications:Super-compact sensor antenna, with optional cable entry (side entryand back entry).
Detection area
Hold-time
Daylight threshold
Stand-by period
Stand-by dimming level
Sensor antenna interface1-10V+ - L' N N L
63.228.8
32.1
808795
4.2
27.5
4
2621
.4
13.5
8
Infrared remote receiver 35.9
30.7
40.4
2.5
25.2
13
Cable side entry
11.2
6.8 8.8Daylight Sensor
Cable side entry
zero-cross point
alternating current
AVAILA
BLE LA
TE-S
EPT 201
8
DWH-LP Low-Profile Industrial/Vapor Tight LED
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
3. 24h Daylight Monitoring FunctionOur innovative and patented software enables our antenna with built-in daylight sensor to provide a “smart photocell” function. This function is activated when stand-by period is set to “+∞”.
4. Loop-in and Loop-out TerminalDouble L N terminal makes it easy for wire loop-in and loop-out, and saves the cost of terminal block and assembly time.
The light switches on at 100% when there is movement detected.
The light turns off completely when natural light lux exceeds daylight threshold pre-set.
The light automatically turns on at 10% when natural light is insufcient (no motion).
The light dims to stand-by level after the hold-time.
The light remains in dimming level at night.
Settings on this demonstration:Hold-time: 10minDaylight threshold: 50luxStand-by dimming level: 10%Stand-by period: + ∞
121:00 21:10
2 321:40
1 3
100% on when movement detected, & dims to 10% in long absence.
goes in cycle at night ...
408:10
517:40
Power On
Check
Every 30 minOff
Dim No motion
motion
Hold-time ends
100% On
Wiring DiagramN
L
LNNL' -+1-10VHC403VRC-KD
LED Driver
+-
LED
Note: this 1-10V output is isolated, SELV output. Do not connect the 1-10V terminals on driver X to Driver Y.
-+
1-10V+ - L N
AVAILA
BLE LA
TE-S
EPT 201
8
DWH-LP Low-Profile Industrial/Vapor Tight LED
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
Stand-by dimming level
Detection range
ON/OFF Auto Mode Reset
Power80%
Test2s
10% 20%
30 min
100%
30min10min5min
0s 10 min
30%
SC C2
SC3
Scene mode
10min
50 0%
30min
Hold-time
Stand-by period
5min
LuxDisabl e
2Lux
10Lux
50Lux
Daylight Sensor
SC4
Power100% +
-Dim
M/A
1
%1
1
1
s
s
S
Settings (HRC-05 Remote Control)
Permanent ON/OFF functionPress the “ON/OFF” button, the light goes to permanent on or permanent off mode, and the sensor is disabled.* Press “Auto Mode”, “RESET” or “Scene mode” buttons to quit this mode.
Sensor modePress “Auto Mode” button, the sensor starts to function and all settings remain the same as the latest status before the light is switched on/off.
Reset functionPress “RESET” button, all settings go back to default settings.
Dim +/-Long press “Dim +” or “Dim ” to adjust the light brightness during hold-time.“+” Means dimming up, “-” means dimming down.
Power outputBy pressing these two buttons, the output shifts between 80% (at initial 10,000 hours) and 100%, for energy saving purpose.
Ambient daylight thresholdPress this button, the latest surrounding lux value overwrites the previous lux value learned, and it is set as the daylight threshold. This feature enables the fixture to function well in any real application circumstances.
Lux disablePress this button, the built-in daylight sensor stops working, and all motion detected could turn on the lighting fixture, no matter how bright the natural light is.
HRC-05Note: the buzzer beeps one time when RC receives signal successfully.
Manual override / Semi-auto mode (absence detection)By pressing this button, the sensor goes to manual override or Semi-auto mode (absence detection) function.*The buzzer beeps twice if it’s manual override function, and beeps once if it shifts to Semi-auto mode (absence detection).
Scene modeThere are 4 scene modes fixed program built in the remote control to choose for different applications:
* End-user can adjust the settings by pressing buttons of detection range/hold-time/stand-by period/stand-by dimming level/daylight sensor.The last setting stays in validity.
Detection rangePress the buttons of “detection range” to set detection range at 10% / 50% / 100%.
Hold-timePress the buttons of “hold-time” to set hold-time at 30s / 1min / 5min / 10min / 30min.
Daylight sensorPress the buttons of “daylight sensor” to set daylight threshold at 2Lux / 10Lux / 50Lux.
Stand-by period (corridor function)Press the buttons of “stand-by period” to set stand-by period at 0s / 10s / 1min / 10min / 30min / +∞.* “0s” means on/off control; “+∞” means bi-level dimming control, the fixture never switches off when daylight sensor is disabled.
Stand-by dimming levelPress the buttons of “stand-by dimming level” to set the stand-by dimming level at 10% / 20% / 30%.sor is disabled.
Test modeThis button is for testing purpose only. The sensor goes to test mode (hold-time is 2s) after commissioning, meanwhile the stand-by period and daylight sensor are disabled.* This mode can be ended by pressing “reset”, or any button of “scene mode” and “hold-time”.The sensor settings are changed accordingly.
ON/OFF
Auto Mode
RESE T
+
-
Power80%
Power100%
LuxDisabl e
M/A
Scene options Detection range Hold-time Stand-by period Stand-by dimming level Daylight sensor
SC1 100% 1min 10 min 10% 2 Lux
SC2 100% 5 min 10 min 10% 2 Lux
SC3 100% 10 min 30 min 10% 10 Lux
SC4 100% 10 min +∞ 10% 50 Lux
AVAILA
BLE LA
TE-S
EPT 201
8
DWH-LP Low-Profile Industrial/Vapor Tight LED
© Copyright Deco Lighting, Inc. 2018
2917 Vail Ave.Commerce Ca 90040
Deco Lighting practices a program of continuous product development, and as a result product specifications change frequently. We reserve the right to change product specifications without notice. Contact Deco for the latest product information.
[email protected]: (800) 613-DECOf: (310)366-6855
Detection Pattern (Ceiling mounted)Model SAM 5
DIP Switch Settings (HC403VRC-KD)
0
4
Cei
ling
mou
nted
hei
ght (
m)
10%30%
50%75%
5
1. Detection Range:Sensor sensitivity can be adjusted by selecting the combination on the DIP switches to fit precisely for each specic application.
2. Hold-time:Select the dip switch configuration for the full brightness on-time after presence detection.Please note that this function is disabled when the natural daylight exceeds the daylight threshold setting for more than 5 minutes.
3. Daylight ThresholdSet the level according to the fixture and environment. The light will not turn on if ambient lux level exceeds the daylight threshold preset.
Please note that the ambient lux level refers to internal light reaching the sensor.Disabling the daylight sensor will put the sensor into occupancy detection only mode.
5. Stand-by dimming levelThe setting is used to select the desired dimmed light level used in periods of absence for enhanced comfort and safety.
100%
75%
50%
10%
I1 2
IIIIIIV
4. Stand-by period (corridor function):This is the time period you would like to keep at the low light output level before it is completely switched off in the long absence of people.Note: “0s” means on/off control; “+∞”means the stand-by time is infinite and the fixture never switches off.
IIIIIIIV
- 100%- 75%- 50%- 10%
IIIIIIIVVVIVIIVIII
- 0s- 10s- 1 min- 5 mins- 10 mins- 30 mins- 1 H- + ∞
1 2 30s10s
1 min5 min
10 min30 min
1 H+ ∞
IIIIIIIVVVIVIIVIII
I 5s30s1min5min10min20min30min
1 2 3
IIIIIIVVVIVII
IIIIIIIVVVIVII
- 5s- 30s- 1 min- 5 mins- 10 mins- 20 mins- 30 mins
I 10%
20%
30%
50%
IIIIIIV
1 2 IIIIIIIV
- 10%- 20%- 30%- 50%
IIIIIIIV
- Disable- 50 Lux- 10 Lux- 02 Lux
1 2I Disable
50 Lux
10 Lux
02 Lux
IIIIIIV AVA
ILABLE
LATE
-SEPT 2
018