cleaning-samsung-ml.pdf
TRANSCRIPT
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 1/10
To learn and to share
Skyjuice
Cleaning the SamSung ML 1610 Laser Printer
30 September 2008
Laser Printers are getting cheaper. They work well and need very little maintenance
except for changing the toner cartridge. At times, there may be a need to clean the
lens of the Laser Scanning Unit (LSU). This article tells how to clean this lens
which was not covered properly in the Samsung’s printer manuals or servicing
guide.
FAQ
What is this LSU unit?
It is the “printer head” of the printer. Instead of emitting ink, the LSU emits a laser
beam, directing it at the drum of the toner cartridge so that electrostatic charge can
be transferred onto the paper to form a “temporary glue” to pick up the carbons as
the paper passes through the drum.
Why need to clean the unit?
Sometimes, when we move our printer around with toner cartridge still inside,
some toner powder could have fallen on to the lens of the LSU. This will weaken
the laser beam and prevent electrostatic charge being transferred onto the paper;as a result, the printing either got missing characters or blank vertical lines.
Where is this LSU unit located?
This is where the manual or the servicing guide wasn't very useful. The unit is
hidden from view and it is located on top of the toner cartridge. A proper tool such
as the dentist's mirror would have to used to see the lens. The lens is protected by a
rectangular plastic window of about 100 mm x 10 mm. (Picture shows the LSU with
the printer cover removed)
Air Conditioning Filters
LED Lighting Saves Energy?
Repairing Ultrasonic Humidifiers
Cleaning Samsung ML 1610 Printer
DIY Bed Cooler
Hot Topics
Last Bullish Engulfing Pattern for
DOW
The Last Bear Engulfing for Olam
A False Breakdown in Olam
International?
Is Olam International Falling Apart?
Insulation for Reef Tanks
LED Lighting Saves Energy?
Additonal Air Conditioning Filter
US Long Term Fund Flow
Use Junk Bond ETFs to Track
Market
Bear Flag in the Making?
Selecting Chillers for Nano Aquarium
Freon vs Peltier Chillers
DIY Bed Cooler Saves 90% Energy
Servicing Resun CL 650 AquariumChiller
New Posts
Search
Search This Blog
Select Other Articles
6Stock Matters
6Audio and Video
6Bicycle
6Free Animated GIF for Forum
6Blogging Improvements
6Car
6Computer Virus/Repair
6Computer
6Computer Graphic
6Energy & Electricity
6Hobby
6Home Appliances
6Others
6
Topic Selection
Distribuie 0 Mai multe Următorul blog» Creaţi blog Autentificare
Page 1 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 2/10
How to clean this lens?
As the lens is made of plastic material, it may not be advisable to use any form of
cleaning chemical that would attack the plastic. The recommendation is just to use
a cotton wool without any chemical.
There are 2 ways to do this cleaning job:-
a) Without stripping the printer unit
1. Switch off the power of the printer
2. Remove the toner cartridge
3. From the front cover, use finger to feel the rectangular window that protects the
lens; paying attention not to touch the lens
4. Use a clean cotton wool and insert it into the window. Gently clean the lens with
horizontal movement. (picture shown with top cover removed)
5. Change the cotton wool if necessary until no more carbon or dirt is seen on the
cotton wool.
email: [email protected]
(dotcom=.com)
View my complete profile
Sky Juice
About Me
Page 2 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 3/10
b) Removal of printer cover to clean the lens
This is for those who are mechanically savvy . To remove the cover,
a) Switch off the printer and remove the printer cable and the power cable
b) Remove the front cover from its hinges and unscrew the 2 screws in the front of
the top cover;
c) Turn the printer around to the back cover and unscrew the 4 screws that
attached the top cover and the back cover to the printer
d) Remove the back cover gently to expose the electronic board. Try not to touch
the electronic board
e) Turn the printer around with the electronic board facing towards you and use
your left and right hand fingers to slightly ply open the bottom part of the top cover
where the 2 front screws were located; at the same time, try to gently lift the top
cover off the printer. The top cover should come off from the printer in one piece
f) Locate the LSU and clean the lens with cotton wools
g) Reassemble the covers in reverse order.
Page 3 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 4/10
Posted by Sky Juice at 05:56
Reference
Exploded view and part list
18 comments:
Anonymous said...
Hi!
I use a Samsung ML-1640. I just bought it recently (Probaly a month back) and
already it reports an LSU error. Does that mean that this particular model is
faulty?
Also, I tried to clean the LSU unit. At least I think it's the LSU unit. It was a tube
that was of a colour slightly darker than neon green that I saw when I took out
the toner.
However, the printer is still not working. I am at a loss and I've tried searching
online forums but to no avail! Perhaps I could get some help from you? Should I
replace the toner?
Please reply me at [email protected]
Thank you very much!!!
Kaye
20 October 2008 06:40
Sky Juice said...
If the Laser Scan Unit(LSU) is faulty, it would have to be replaced. The
electronic board could also be faulty. These parts are not only difficult to get butalso expensive. Since the printer is new, have it replaced.
The LSU is hidden from view. One would have to dismantle the cover. The "neon
green tube" that you have seen in the toner is probably the drum, part of the
toner unit. Replacement of toner would not help.
20 October 2008 09:52
Gerardtm said...
It is easy to open the laser unit as well for even more thorough cleaning: there
are 4 clips that are easy to pry open from below. The instructions saved me
purchasing a new printer. Thanks !
20 December 2009 14:17
suma said...
I had cleaned LSU unit but still printer is not working. How much it will cost to
replace LSU unit or repair of electric board. is it better to buy new printer rather
than repairing of the older one. reply on [email protected]
21 August 2011 22:32
Anonymous said...
With the help of your instructions, I managed to disassemble my ml-1610
enough to be able to rotate the takeup rubber back into its correct position.
The problem occurred as a result of my pulling out jammed paper through the
printer's front opening.
Now it's back to working condition.
Page 4 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 5/10
Many thanks!
7 February 2012 11:13
Anonymous said...
Thanks for taking the effort to write this tutorial.
It was very helpful!
12 February 2012 13:04
paulbisente said...
Thank you so much for this wonderful tutorial.
24 May 2012 00:27
Anonymous said...
Thanks for writing this information on your site.
Also see my webpage: Clean and Green Washroom Products
16 June 2012 06:07
Anonymous said...
Hi nice info.can you provide more info like which part use for which purpose.
My same printer giving online error.red light blink.paper just feed half.which u
can easily emove by hand .can you tell what will be problem.empty toner?how to
know toner is empty. 91-8108730063 [email protected]
2 August 2012 05:59
Bob said...
Wow thanks! I managed to fix my printer with your guidelines, so this saves me
buying a new one!
4 September 2012 06:40
print head said...
Great post ! I am really thankful to you for sharing such a nice information
about cleaning the samsung ML 1610 laser printer. Keep posting information
like this.
Printhead911
6 September 2012 12:02
Anonymous said...
Thank you, this was very helpful for me disassembling the ML1610. The lens
cleaning (cotton bud only)greatly improved the quality of prints. Furthermore
the internal cleaning (with a brush) and the lubricating of all gearwheels lead to
no more paper jams :) Now it works just like new!
Cheers12 December 2012 03:45
Sweet Fairy said...
Great post with so nice details. Can i print Plastic cards by any laser printer?
21 December 2012 22:49
Sky Juice said...
Sweet Fairy
The Samsung ML 1600 is just an ordinary laser printer and not a plastic card
printer. It does not have dye sublimation and/or thermal transfer printing
capabilities.
22 December 2012 17:11
Page 5 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 6/10
Subscribe to: Post Comments (Atom)
Home Newer Post Older Post
Post a Comment
plastic cards printing said...
Thanks for an insightful post. These comments are really helpful.. I found a lot
of useful tips from this post.
11 January 2013 01:39
Anonymous said...
Te lo agardezco!
Gracias!!!
24 January 2013 18:34
Anonymous said...
Thanks for this guide!
Additionally - our laser lens was dirty on the inside. not the accessible front side.
As someone said above, it's easy to open the laser unit and clean the inside of
the lens too. We had bought a new original toner and had a white line down the
page. After cleaning our printer is now as good as new. Thank you.
5 May 2013 11:34
Jacintha Sujatha said...
thanks for your explanation...just sorted out my ml-1610....
26 July 2013 13:27
Simple template. Template images by luoman. Powered by Blogger.
Page 6 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 7/10
Page 7 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 8/10
Page 8 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...
7/27/2019 cleaning-samsung-ml.pdf
http://slidepdf.com/reader/full/cleaning-samsung-mlpdf 9/10
Page 9 of 10Skyjuice: Cleaning the SamSung ML 1610 Laser Printer
10/18/2013http://skyjuiceiswater.blogspot.ro/2008/09/cleaning-samsung-ml-1610-laser-printer.ht...