1, bearing cleaning

When removing SKF deep groove ball bearings and repairing, you first record the bearing

appearance, in order to confirm the residual amount of lubricant. After checking the lubricant

used for sampling, wash bearings. Use ordinary gasoline and kerosene as a cleaning agent.

Bearing cleaning divided into rough cleaning and sperm washing. Respectively place on the

bottom of the metal net in a container so that SKF deep groove ball bearings do not directly

touch the dirt in container. When rough cleaning, if you rotate the bearing with dirt will damage

bearing rolling surface, so you should notice. In cleaning crude oil, use the brush removing

grease, adhesive, and then turn into sperm washing.

Sperm washing, is rotating side SKF deep groove ball bearings in cleaning oil while carefully

cleaned. In addition, clean oil regularly to keep clean.

2, bearing maintenance and judgment

In order to determine if removed SKF deep groove ball bearings can be used, check them after

bearings washed clean. Carefully check the raceway surface, rolling surface, the status of the

mating surfaces, cage wear, clearance increases and injury due to decline in accuracy,

exception.

With separation bearing like SKF deep groove ball bearings, you can check outer ring raceway

and rolling body respectively.

Larger bearings cannot be rotated with hands, note to check the rolling element and the

Raceway, cage, flange surface appearance.

Whether the bearing can be used is depend on bearing damage, mechanical properties, and

the operating conditions, and determined during the next maintenance. However, if have the

following defects, SKF deep groove ball bearings can no longer be used, must be replaced:

(A) any cracks or gaps on inner ring, outer ring, rolling elements, cages;

(B) fracture on the rings or rolling elements;

(C) a significant wound on raceway surface, rib, rolling body;

(D) cages wear significantly, or rivets relaxation significantly;

(E) rust, wound on raceway surface or rolling body;

(F) serious creasing and marks on raceway surface or rolling element;

(G) clear the inner circle diameter or outer ring outside diameter surface creep;

(H) discoloration obviously due to thermal ;

(I) broken clearly of the seals or shields.

Check more posts at www.ziso.cn or products reviews at

http://www.hisupplier.com/a-single-row-ball-bearing/.