CLEANINGRECOMMENDATIONS

PREVENTATIVE MEASURESP. 4

SPOT CLEANING

P. 8

SPECIALISED MAINTENANCEP. 11

01

ROUTINE CLEANINGP. 7

0203

04RECOMMENDED AND APPROVED MACHINERY & PRODUCTS P. 13

CLEANING RECOMMENDATIONSNeed a hand?

modulyss® prides itself in making quality carpet tiles that meet the strictest European standards, EN1307. Our carpet tiles are known for their strong character and their optimal retention of colour and appearance. These properties not only guarantee a long life, but also make the cleaning of the carpet tiles easier and faster, which in turns means lower maintenance costs.

To help you enjoy your modulyss® carpet as long as possible, we have compiled the following Cleaning Recommendations. Retaining the beauty of your carpet requires a scheduled approach. The good news? Smart and regular maintenance repays itself many times over.

3

01 PREVENTATIVE MEASURESPrepare & prevent

The lasting and beautiful character of a modulyss® carpet tile is determined by the right choice of the quality and colour of the tile. In rooms with intensive foot traffic, it is best to opt for darker colours. The carpet has a greater dirt-concealing capacity in such a case.

Clean-off zone

The protection of an interior starts with an optimal protection of the entrance. 85% of the dirt is brought in by shoes, and that is why we recommend installing an efficient and sufficiently long clean-off zone (minimum 9 metres) where an entrance from the outside or from heavily soiled areas is possible.

We recommend you to opt for a carpet tile with a darker colour and an irregular pattern. In-groove carpet tiles, made of sturdy, soil-resistant yarn, are ideally suited for clean-off zones.

Types of traffic areas

An (office) space can be divided in 4 traffic areas:

1 2

4

3

1 Clean-off zone2 Heavily intensive traffic area3 Intensive traffic area4 Normal traffic area

4

1-3 m 35%

50%

75%

99%

3-5 m

5-9 m

IN-GROOVE 942

WE RECOMMEND INSTALLING A CLEAN-OFF ZONE OF MIN. 9 METRES.

02ROUTINE CLEANINGDaily maintenance

Vacuum cleaning using a brush vacuum cleaner consti-tutes the basis of daily maintenance. It can remove about 80% of the dirt from the carpet. Furthermore, a brush vacuum cleaner helps to retain the appearance of a carpet tile’s pile. Do not forget to regularly replace the vacuum cleaner bag.

The vacuuming frequency is determined by the foot traffic and the soiling of the carpet:

➜ Heavily intensive traffic: 1 x per day➜ Intensive traffic: 2 to 3 x per week➜ Normal traffic: 1 x per week

Recommended machinery: see page 13.

A CLEAN PLACE

MAKES A HAPPY SPACE.

CAUTION: using horizontal rotating brushes to clean the carpet might affect the appearance of the pile of the carpet tiles.

7

Spot removal

We recommend that marks be removed from the carpet immediately, as old spots are far more difficult to clean.

Take the following tips into account:

➜ remove solids using a spoon or spatula; ➜ remove liquids using a clean white cloth or blotting

paper; ➜ always treat the mark using a clean damp cloth; ➜ work from the edges towards the middle of the mark,

with the pile; ➜ dab the mark, but never rub it.

When removing marks, carefully follow the instruc-tions mentioned on the cleaning products. Always use products that are pH neutral and avoid products with chlorine (e.g. bleach) or chemically aggressive oxidants. We recommend pre-testing an inconspicuous area for colour fastness and material durability.

Removing water-based marks

Sprinkle the agent directly on the carpet. Do not use the agent if the carpet leaves a coloured mark on the cloth. Subsequently, use the dry cleaning agent as follows:

1 After removing a semi-hardened or hardened mark, dab at the mark with a clean damp cloth. Then remove the remaining soiling with a small quantity of a dry cleaning agent. Sprinkle the cleaner over the mark and brush it in carefully with a hand brush.

2 Let the area dry for around 15 to 30 minutes and brush the cleaner in again. If the cleaner appears to be sticking to the carpet, brush carefully and vacuum the affected area. If necessary, repeat the process.

03SPOT CLEANING

8

Removing oil-based marks

To remove oil-based marks such as paint, fat, tar, asphalt, etc., use specialist carpet stain removers. Sprinkle the remover on a clean, white cloth and press it onto the carpet. Do not use the remover if the carpet leaves a coloured mark on the cloth. Subsequently use the stain remover as follows:

1 Wipe carefully inwards from the outside edge of the mark. Repeat the procedure until the mark has been removed. Following chemical treatment, rinse the mark with a damp cloth to remove cleaner residue. Protect the cleaned part until the carpet is completely dry.

2 Afterwards treat with a dry cleaner as described under ‘removing water-based marks’.

Removing dried-on and stubborn marks

Marks that are hard to remove like rust, varnish, coffee, chewing gum and soft drinks require specialist treatment (see spot removal chart).

In case the stubborn mark cannot be removed, call in an expert who can use the right products to avoid damaging the carpet. Recommended products: see page 13.

STAIN TREATMENT

Coffee, thee, soft drinks and wine Blood, urine and vomit

Moisten a towel with cold water and let it absorb the fluid. Repeat until all fluid has been absorbed. Let the carpet dry and spray the stain with the Crystal Spot Remover®. Brush away with the Spotting Tool®.

Food and fruit Remove all loose elements with a tea spoon. Spray the stain with the Crystal Spot Remover® and brush away with the Spotting Tool®.

Chewing gum Spray the stain with a gum freezer. Scrape off the chewing gum with a tea spoon. Follow up with a little Oil & Grease® on a dry cloth.

Shoe polish Apply a little Oil & Grease to a dry cloth and dab the stain away. Then spray the stain with the Crystal Spot Remover® and brush away with the Spotting Tool®.

Stickers, paint, sealant and glue

(Remove the sticker). Let the (remaining) stain dry and scrape it off with a tea spoon. Apply a little Oil & Grease® to a dry cloth and dab the stain away. Spray the stain with the Crystal Spot Remover® or Spotting Tool®.

These spot removal tips apply to all modulyss® carpet tile styles: loop pile, cut pile and mini-tuft. modulyss® cannot guarantee that the recommended products will remove all stains.

9

CRYSTAL DRY

METHOD

The goal of specialised maintenance is to keep the carpet clean and maintain a consistent appearance level. The primary focus is on frequent low-moisture pile lifting and the removal of sticky residues or stubborn marks that would otherwise trap soil in the carpet fibers.

We recommend to execute the specialised maintenance 2 to 3 times per year depending on the foot traffic and the soiling of the carpet.

Encapsulation method

The encapsulation method is the next-generation approach to effective periodic maintenance and can be performed by means of the Smart Care® TRIO System machine.

The Crystal Dry Method deposits cleaning product in solution onto the surface as mist (low moisture). Crystals, made up of polymers, are sprayed over the carpet. The Triomachine then brushes the carpet so that the dirt and dust are encapsulated into the crystals. The result? A crystalline residue that encapsulates foreign soils. The soil-laden crystals are removed easily by vacuuming.

Examine the carpet for accidental spots which were not removed during cleaning and treat these with the Crystal Spot Remover® & Spotting Tool®.

Advantages:

➜ highly effective;➜ dry process: no sticky residue will remain in the

carpet;➜ the carpet can be used immediately after cleaning;➜ less to no noise pollution➜ prescribed and advised by all recognized carpet

manufacturers;➜ Green seal certified;➜ no odours.

Committed to reducing our environmental impact, modulyss® recommends this water-saving, sustainable solution for carpet cleaning. Recommended machinery: see page 14.

04SPECIALISED MAINTENANCE

PROLONG YOUR

CARPET’S LIFE-

CYCLE THROUGH

SPECIALIST

CLEANING.

CAUTION: the Bonnet cleaning method might affect the appearance of the pile of the carpet tiles. modulyss® does not advocate this method.

11

Hot water extraction method

The hot water extraction method, an alternative deep cleaning method, removes soil deep in the pile. First, a solution of water and detergent, based on crystals, is sprayed on the carpet. Then, the carpet is rinsed thoroughly using the pressurized hot water extraction method.

Keep in mind:

➜ a higher volume of water is used;➜ cleaning will have to be scheduled in the evening

or at night, due to longer drying times and possible noise nuisance;

➜ there is a chance of odour development;➜ there is a risk of shrinkage;➜ caution should be taken with under-floor wiring.

CAUTION: this cleaning method should not be used on the modulyss® mini-tuft products.

We recommend not to walk on the carpet or put furniture back in place until the carpet is completely dry, to avoid the risk of dirt on chair legs etc. rubbing off on the damp carpet.

We advise against using shampoo detergent. High pH cleaners leave a residue, which may cause rapid resoiling and fiber damage. Recommended machinery: see page 14.

12

ROUTINE CLEANING

➜ Basic vacuum cleaner (for everyday use)➜ Specialised vacuum cleaner:

brush vacuum cleaner type SEBO Dart 2

Sebo Dart 2 offers professional performance in a light-weight, versatile and easy to manoeuvre machine. Designed to be agile and user-friendly, SEBO Dart 2 achieves superb cleaning results.

RECOMMENDED AND APPROVED MACHINERY & PRODUCTS (1) (2)

SPOT CLEANING

➜ Spot removal

The Crystal Spot Remover® is a stain-removal agent based on crystals. Combined with the Spotting Tool®, Crystal Spot Remover® is the perfect product for easy and safe removal of stains for commercial carpet. Using chamfered openings instead of bristles, the Spotting Tool® lifts stains by mildly agitating the fibers.

SEBO DART 2

Vacuum motor 1300Brush motor: 200 WattAir flow: 50 l/sWorking width: 370 mmBrush speed: 2700 rpmWeight: 7.4 kgCable length: 9.5 mFilter S-classFilter bag: 3.5 L3 layers

CRYSTAL SPOT REMOVER®

Stain-removal agent based on crystalsUsed in combination with  the Spotting Tool®

(1) Our list of recommended machinery is just that: a recommendation. Naturally, equivalent models may be used.(2) All machinery and products are tested & approved by The Carpet and Rug Institute (CRI).

13

SPECIALISED MAINTENANCE

➜ Encapsulation method The Smart CARE® Trio machine is a low-moisture agitation and crystallization carpet maintenance system.

Periodic maintenance: Smart CARE® Trio machine + Crystal dry Extra

Deep cleaning: Smart CARE® Trio machine + Crystal Quick Restore (replaces the hot water extraction method)

➜ Hot water extraction method

The hot water extraction method is an effective deep cleaning method that removes soil deep in the pile. The machine sprays cleaning solution onto the carpet using high pressure and simultaneously vacuums the dirty solution.

SMART CARE® TRIO MACHINE

UNIT 15 inch / 20 inchPower: 1100 Watt / 1400 WattCleaning capacity: 200 m2/hDeep cleaning capacity: 100 m2/h Cleaning width: 381 mm / 508 mmBrush speed: 480 rpm / 665 rpmDry weight: 30 kg / 34 kg Voltage: 230 VFrequency: 60 HzFresh water tank capacity: 9.5 L

HOT WATER EXTRACTION MACHINE

CTD-570-2 Spray Extraction Machine*Power: two 1200 Watt by-pass powerflo motors Voltage: 230 VCapacity: 10 L Built-in pumpWith full tool kit

(*) Technical specifications may vary by brand and model.

14

RECOMMENDED CLEANING COMPANY

For additional advice on cleaning methods, products or local Progenta partners, please contact your local modulyss® sales representative or:

Progenta Projectservices (headquarters)Veenendaalsestraatweg 14b3921 EC Elst (Utr)The NetherlandsTel. 0031 (0) 318 – 471 823info@progenta.com

If it is ascertained that the carpet tiles are not cleaned in an appropriate way, modulyss® cannot be held accountable for any damages. Moreover, this will result in the loss of the company’s 15-year warranty coverage.

15

www.modulyss.com

Printed

on F

SC

Certified

Pap

er - 12-2015 EN