cleaning

14
PRODUCT 1: FLIPPER-SWEEPER EQUIPMENTS The Flipper is a walk behind sweeping machine and it’s an intelligent solution for quick and easy sweeping. This sweeping machine picks up dust automatically and leaves even corners spotlessly clean. As shown in the picture the main wheel of the machine, through gear mechanism, transfers rotation to a setoff 10 Brush Rails which being constantly in touch with the floor flips all the dirt and dust into the container. The rotary side brush sweeps the dust and dirt away from walls into the path of the wide main brush which deposits it directly into the large hopper. Rubber flaps seal off the main room chamber, so that no dust is swirled about. It can sweep in both the forward and reverse direction and reduces working time. With its large drive wheels and front guide wheel, the Flipper travels easily over any surface - concrete, wood and asphalt. Adjusting the pressure on the main brush assembly makes it easy to push even on rough areas which offer uninhibited action in halls, workrooms, warehouses, exterior areas and parks. The collecting bin hopper has a capacity of 40 liters. Yet it is so light that emptying it poses no problem at all. The built-in handle enables easy emptying of dust and debris in to the trash bin. Flipper has a robust construction with rust free powder coated steel frame and hopper. This is highly maneuverable and extremely easy to operate. When the operator walks behind pushing this machine, sweeping operation is carried out automatically for the width of the machine It provides clean working method and large area performance in lesser time. The machine is suitable for daily, industrial use-for both indoor and outdoor cleaning. This rugged machine has the great advantage of arresting the flying dust while sweeping and is a perfect substitution for conventional brooming system. It has clean working method for both fine dust and larger dirt particles.The product is an ideal solution for trade, industry, property owners and other similar applications. Area performance up to 1,500 m 2 /hour. Technical Details Working width without side broom 460mm Working width with side broom 650mm Machine width with side 770mm Dust Hopper Side Brush

Upload: stranfir

Post on 21-Nov-2014

205 views

Category:

Documents


4 download

DESCRIPTION

Cleaning-House keeping

TRANSCRIPT

Page 1: Cleaning

PRODUCT 1: FLIPPER-SWEEPER EQUIPMENTS

The Flipper is a walk behind sweeping machine and it’s an intelligent solution for quick and easy sweeping. This sweeping machine picks up dust automatically and leaves even corners spotlessly clean.

As shown in the picture the main wheel of the machine, through gear mechanism, transfers rotation to a setoff 10 Brush Rails which being constantly in touch with the floor flips all the dirt and dust into the container. The rotary side brush sweeps the dust and dirt away from walls into the path of the wide main brush which deposits it directly into the large hopper. Rubber flaps seal off the main room chamber, so that no dust is swirled about. It can sweep in both the forward and reverse direction and reduces working time. With its large drive wheels and front guide wheel, the Flipper travels easily over any surface - concrete, wood and asphalt. Adjusting the pressure on the main brush assembly makes it easy to push even on rough areas which offer uninhibited action in halls, workrooms, warehouses, exterior areas and parks. The collecting bin hopper has a capacity of 40 liters. Yet it is so light that emptying it poses no problem at all.

The built-in handle enables easy emptying of dust and debris in to the trash bin.

Flipper has a robust construction with rust free powder coated steel frame and hopper. This is highly maneuverable and extremely easy to operate. When the operator walks behind pushing this machine, sweeping operation is carried out automatically for the width of the machine It provides clean working method and large area performance in lesser time. The machine is suitable for daily, industrial use-for both indoor and outdoor cleaning. This rugged machine has the great advantage of arresting the flying dust while sweeping and is a perfect substitution for conventional brooming system. It has clean working method for both fine dust and larger dirt particles.The product is an ideal solution for trade, industry, property owners and other similar applications.

Area performance up to 1,500 m2/hour.

Technical DetailsWorking width without side broom 460mm

Working width with side broom 650mm

Machine width with side broom 770mm

Height to the top of the handle 900mm

Total weight ready to use 32Kgs

Hopper bin capacity 40Litres

Dust Hopper

Side Brush

Page 2: Cleaning

Flipper - Sweeper Equipment

Features

It is a manually operated cleaning system. Virtually voiceless Does not emit any fumes

Applications

Workshop Floors Factory pathways Factory parking lots Airports Hospitals Hotels Shopping Complex Offices Railway Stations Petrol Pumps

Advantages Efficient Economical Effective Consumes no power Easy to operate Requires no training to operate / fast Maintenance-free.

Page 3: Cleaning

PRODUCT 2: AUTOMATIC SCRUBBER DRIER MACHINE

This is an Automatic Scrubber Drier Machine. This machine has two different tanks, one for clean water and another for dirty water. The clean water with detergent flows by gravity to the floor where a disc brush scrubs the floor. The dirty water after scrubbing is sucked back by the machine in to the dirty water tank. Thus the floor is scrubbed and dried in one single pass. The extension squeegee available as an optional attachment reaches all in accessible areas and helps in cleaning the nooks and corners too.

Mechanism of Scrubber Drier Machine

Cleaning Scrubber Drier Fast (Roots Hakomatic E/B 430)

This is electrically operated and ideally suitable for Scrubbing and Cleaning floors of Oil, Dirt, Sludge etc. It helps maintaining the floor from relaying /regrinding etc. This machine has different brushes and detergents to suit different floorings and levels of dirt. It works on all floor types like Mossaic, Cement, Ceramic, Marble or Wood.

The machine is extremely compact and robustly constructed and it guarantees a high degree of maneuverability and easy handling.

Roots Hakomatic E/B 430

Page 4: Cleaning

Technical Data Roots Hakomatic B430 E430

Number of Brushes Units 1 1

Brush diameter/working width Cm 43 43

Effective suction width Cm 75 75

Theoretical area performance m2/h 1700 1700

Air flow m3/h 108 155

Vacuum mbar(mm/WC) 110(1100) 200(2000)

Nominal Voltage, frequency Volt/Hz 24 DC/- 230 AC/50 Hz

Power requirement, total W 800 1800

Power brush motor W 450 800

Power suction motor W 350 1000

Working speed up to km/h 4 4

Brush Speed Rpm 280 288

Brush pressure kg/N 20/200 22/220

Specific brush pressure N/cm2 0,25-0,35 0,25-0,37

Clean water tank Litres 22 22

Dirty water tank Litres 22 22

Measurements/Weight

Light,ready for operation Cm 100 100

Width(Without/With squeegee) Cm 45/75 45/75

Height,ready for operation Cm 95 95

Total weight,without batteries/brushes Kg 80 76

Features Efficient and Fast cleaning User Friendly

Competitively Priced

Compact and highly manoeuvrable

Suited for varied surfaces

Applications Hospitals Industrial floors

Airports

Offices

Hotels

Commercial Complexes

Dairies

Laboratories

Canteens

Auditoriums

Page 5: Cleaning

Departmental stores

Health centres

Restaurants

Cinema Theatres

Auditoriums

Showrooms, etc.,

Page 6: Cleaning

PROJECT 3: FLOOR CLEANING MACHINE

This is a mini floor washing machine designed to clean different types of floors. The compact and high-tech design enable sthe machine to be operate dunder shelves, chords/tables and chairs where other machines

normally cannot reach.

Side View Of Working

Machine has a set of two counter rotating brushes which scrubs and dries the floor. The machine contains two tanks, one for clean water and the other for dirty water . This is a compact machine easy to be taken from place to place during cleaning.

Roots Wizzard

This is mini floor scrubbing machine ideally suitable for scrubbing and drying small to medium areas.The rugged design of the mini floor washing machine ensures trouble free and continuous operation.

Different types of brushes are available to suit any type of floor including escalators. 4 stage brush pressure adjustment device is provided to compensate for the wear of the brushes which ensures optimum use of the brushes.

W34T Model

Model W44P W34P W34T W34N W24N

Cleaning 450m2/hr 350m2/hr 350m2/hr 350m2/hr 250m2/hr

Clean Water Tank

Dirty Water Tank

Page 7: Cleaning

CapacityCleaning width

42cm 31.5cm 31.5cm 31.5cm 21.5cm

Brush Speed

650RPM 650RPM 650RPM 650RPM 650RPM

Fresh water capacity

4 litre 4 litre 4 litre 1.7 litre 1.2 litre

Motor Rating

1000+26 W

750+26 W 750 W 750 W 550 W

Power Supply

230VAC 230VAC 230VAC 230VAC 230VAC

  All 60 Hz Single Phase with 6 % Variation

Noise Level at

71 db 69 db 69 db 69 db 68 db

(1 m Dist and 1.6m height)

Overall dimensions

         

Height with handle

1118 mm 1114 mm 1114 mm 1114 mm 1118 mm

Height without handle

210 mm 210 mm 210 mm 210 mm 210 mm

Width 540 mm 440 mm 440 mm 440 mm 340 mm

Length 378 mm 378 mm 378 mm 378 mm 378 mm

Weight 29.5 kg 25 kg 24.5 kg 23.5 kg 20 kg

Specification of various Wizzard Models

Features

Floor washing machine ideal for small & medium size Super-markets. Floor washing machine ideal for hospitals because of the low noise level.

Essential tool for maintaining high level of hygiene for Hotel - kitchens and restaurants.

Safety feature includes pedal to secure the handle intact.

Floor washing machine's easy manouverability and easy to reach beneath the furniture.

No tools required to change brushes.

PRODUCT 4: HIGH PRESSURE JET CLEANER

This is continuous rated, three phase machine for heavy duty application. It has a rugged and sturdy construction with powder coated steel frame.The machine features a Turbo Nozzle for high pressure cleaning. Vario Zoom Nozzle adjustable pressure with operation on soap solution and disinfectant.

Page 8: Cleaning

High Pressure Jet Cleaner (Jet E 150)

This is ideal equipment for tasks that require extremely powerful cleaning like that in Construction Industries,

Hotel Industries, Tea Industries, Canteens, Dairy Farms and Automotive Sector.

JET E 150

Technical Specification

S.No Description Units Values

1 Power Kw 2.25

2 Voltage V 415±10%

3 Current A 5.2Max

4 Frequency Hz 50

5 Phase F 3

6 Insulation Class   F

7 Discharge @ rated Pressure Lpm 8

8 Pressure Bar 150 Max

9 Rating   Continuous duty

10 Solution Tank Capacity L 5

11 Length of Lance Mm 900

12 Hose length M 15

13 Cable length M 10

14 Temperature of inlet water 0C 500C Max

15 Weight Kg 75

16 Dimensions(L*W*H) Mm 1060*530*900

Standard Equipment

High pressure hose 15m Gun with extension Lance Vario nozzle and turbo hammer

Technical Features

Chasis Set Powder coated mild steelPump Set Reciprocating 1450 rpm with crankshaft, Brass head,

3 Ceramic pistons, Pressure regulator valvesPressure Gauge Glycerine filled 0-220 bar

Page 9: Cleaning

Electric Motor 440 rpm, 50 Hz, 3 Phase continuous duty, F class insulation, Gravity casting

HP Hose 15 M, R2 at 5/16”, Pressure 350 bar, Connections M22*1.5F, Spray gun with extension, Pressure 250 bar

Extension Lance Metallic, Brass, 900mmElectric Chord Set 4 pair socket, 4 core, 10m,1.5 sq. mm

PRODUCT 5: INDUSTRIAL VACUUM CLEANER

The wet and dry Vacuum cleaner with standard steel container which are rustproof and mounted on trolley for easy movement. Each machine is supplied with one set of accessories to suit cleaning of Oil sumps, drip trays etc. The availability of various sizes and capacities makes it widely oriented.

Industrial Vacuum Cleaners

Heavy Duty Industrial Vacuum Cleaner (Single Phase) Features

Strong, Silent, Heavy Duty, Single Phase Industrial vacuum. For Wet and dry application Constructed with Stainless steel recovery container

Volumetric recovery capacity from 15 ltrs-77 ltrs

Highly maneuverable with polyurethane wheels

Available in single, dual and trio by-pass motors

Options with 0.3 Micron HEPA filter

High vacuum and airflow

Standard accessories for wet and dry application

Applications Hotels Industry Hospitals Resturants Knitting Industry

Printing & Packing Industry

Page 10: Cleaning

Model Name Rated Power 2 Stage By-Pass Motor

Mains Supply (1 Phase) Volts

Water lift (mm of WC)

Air flow (Ltrs/sec)

Tank Capacity (in Ltrs)

Dimensions L*W*H(in mm)

SUPERCONDOR 1200W 220-240/50 Hz 2200 50 15 390*390*520

BASE315 1200W 220-240/50 Hz 2200 50 23 390*390*640

BASE 303 1400W 220-240/50 Hz 2400 60 23 390*390*640

BASE 429T 2400W 220-240/50 Hz 2200 95 77 640*550*1006

BASE 433T 3600W 220-240/50 Hz 2400 180 77 640*550*1006

Heavy Duty -3 Phase-Industrial Vacuum

Features

Robust, Versatile, Continuous rated, three phase Industrial vacuum Constructed with stainless steel container and powder coated steel body.

High vacuum and airflow.

Highly maneuverable with large Main wheels and castor wheel

High volumetric capacity.

Polyester Pocket filter

Application Areas: Tea Factories Textile Industry Engineering Industry Automobile Industry

Model Name

Rated Power 2 Stage By-Pass Motor

Mains Supply (1 Phase) Volts

Water lift (mm of WC)

Air flow (Ltrs/sec)

Weight kg

Tank Capacity (in Ltrs)

Dimensions L*W*H(in mm)

Taurus 100 4 HP 400±5% 2200 100 72 98 610*1150*1090

Page 11: Cleaning

Company ProfileCompany Name Roots Multiclean Limited

Address R.K.G. Industrial Estate,Ganapathy,Coimbatore-641006, Tamilnadu,INDIA

Contact person Mr. J Krishna Kumar

Phone +91-422-4330221,4330330

Fax +91-422-2332107,2330477

E-mail [email protected] , [email protected]

Web Site www.rmclindia.com

Year of Establishment 1992

Product(s) Manufactured Roots Flipper

Roots Hakomatic E-430

Roots Wizzard

Roots Jet Cleaner

Roots Soteco Heavy Duty Industrial Vacuum Cleaner

Production (FY-05) (Products contributing most to the sales)

760 Nos. of Hakomatic E430

Sales Turnover FY 05: USD 7.77 Mn

FY 04: USD 5.21 Mn

FY 03: USD 3.81 Mn

Conformity to Standards Indian Standards

Compliance to ISO ISO 9001-2000

Foreign Collaboration Foreign Equity 26%, Joint Venture with HAKO WERKE GMBH ,Germany

Manpower Total (Nos.) 80

Raw Materials / Equipment used Switches, Capacitors, Capacitors Terminals, Harmonized Cable (LAPP), Poly Carbonide(GE), Delrin(Dubont),CRCA Sheet, ABS BO White, Nylon 6GF 30% Black

Effluent Generated Nil

Page 12: Cleaning

Broad Profile of Project Offer

Project To Manufacture Industrial/ Domestic Cleaning Equipments

Capacity per Annum 1000 Equipments

Land Requirements/ Building Requirements 1800 Square Meter

Plant & Machinery and Test Equipment Appended Below

Electrical Installation 125 KVA

Implementation Period 18 Months

Manpower Required 5

Raw Materials / Equipment Required Appended Below

Total Project Cost USD 0.44 Mn (Approx.)

Expected Annual Sales USD 0.5 Mn

Profitability 10%

Form of Offer Turnkey Project

Machineries CNC Milling

EDM

Surface Grinding

Cylindrical GR

Milling

Lathe

Shapping0

Pentograph

Drilling

Tool & Cutter Grinder

Bench Grinder

Power Rack Saw

Testing and Measuring Equipments Digimatic Vernier Caliper

Vernier Caliper

Micrometer

Metric/Inch Height Guage

Bever Protractor

Digital Ammeter

Digital Voltmeter

Coating Thickness Guage -Digital