classroom rules
DESCRIPTION
Classroom Rules. Safety glasses must be worn when using equipment. Follow all safety procedures and correct use when using equipment. Be respectful of people and property. Tools and school property must be returned before leaving class. Clean your designated area . Safety in the jewelry lab. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/1.jpg)
Classroom Rules• Safety glasses must be worn when
using equipment.• Follow all safety procedures and
correct use when using equipment.• Be respectful of people and property.• Tools and school property must be
returned before leaving class.• Clean your designated area.
![Page 2: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/2.jpg)
Safety
in the jewelry lab
![Page 3: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/3.jpg)
1. Accidents are caused by mistakes; mistakes can be avoided. If there is an accident, even a small one,
the first person you should tell is:
a. SCHOOL NURSEb.PRINCIPALc. NEAREST STUDENTd. TEACHER
![Page 4: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/4.jpg)
2. The best type of clothing to wear in the jewelry lab is:
A. bikiniB. Long sleeved jacketsC. Suit & tieD. Short sleeves & tighter clothing
![Page 5: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/5.jpg)
3. Big rings and dangling jewelry can be dangerous to wear because they could:
a. Get lost or stolenb. Get damagedc. Get caught in a machine
d. Make you look like a gypsy
![Page 6: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/6.jpg)
4. If you have long hair, before you come to the jewelry lab you should:
A. Tie it back with a clip or bandB. Braid itC. Have it cut or shaved off
![Page 7: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/7.jpg)
5. The best way to increase tool life and add to your safety when using tools in the classroom is to:
A. Wash them in soap & water
B. Use the proper tool for the job intended
C. Use the torch for everything
![Page 8: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/8.jpg)
6. If you are using a tool that doesn’t seem to be working properly you should:
A. Report it to the teacherB. Torch itC. Put it away & let someone else deal with it
![Page 9: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/9.jpg)
7. You should not eat, drink, put your hands in your mouth or rub your eyes
while you are in the jewelry studio because:
A. There are toxic materials in the labB. You can’t share with everybodyC. You might bring ants.
![Page 10: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/10.jpg)
8. Safety glasses must be worn:
A. When you work with metalB. When you use power toolsC. Whenever you are in the jewelry room.
![Page 11: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/11.jpg)
9. Frayed insulation, loose connections, or exposed electrical wires can cause a shock or fire. If you notice a tool that has defective wiring you should:
A. Solder it together with the torchB. Tape the wire with electrical tapeC. Report defective wiring to the teacher
![Page 12: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/12.jpg)
10. When you use the grinder or the drill press you should:
A. Use clamps, pliers, or leather to hold your piece.B. Solder your piece to something biggerC. Wash your metal first
![Page 13: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/13.jpg)
11. Playing around in the jewelry lab is:
A. Not only annoying, but dangerousB. Only okay when the teacher is goneC. Fun & you should do it every day
& dumb
….
![Page 14: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/14.jpg)
12. If you get acid on you from the pickle bath you should:
A. Run quickly to the officeB. Rub the acid offC. Test your pain thresholdD. Flush the affected area with water
![Page 15: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/15.jpg)
13. There will be a chemical reaction & silver pieces will get covered in copper in the pickle bath if:
A. Someone uses steel pliers instead of copper tongs
B. If the pickle is coldC. Someone puts their hands in the pickle
![Page 16: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/16.jpg)
14. When using a polishing wheel to polish metal, hold the object:
A. So all areas are equally safe
B. On the lower half, below mid-point
C. The very lowest part of the wheel
![Page 17: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/17.jpg)
15. When using the polishing wheel, the way to prevent friction burns as you hold the metal is:
A. Needle-nose pliers
B. Clamp or a piece of leather
c. Leather gloves
![Page 18: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/18.jpg)
16. While using power tools you jeopardize the safety of those around you
if you:
A. Use safety glasses
B. Talk & look away from your work
C. Watch where your hands are
D. Concentrate on your work
![Page 19: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/19.jpg)
TAKE 5!!!
![Page 20: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/20.jpg)
17. If the valve on the acetylene torch handle has been open for 4 seconds or longer, you
should?
A. Use the striker to light the gas
B. Shut off the gas and clear the air
C. Set it down and leave
D. Blow on the tip
![Page 21: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/21.jpg)
NEVER LEAVE AN OPEN FLAME
UNATTENDED!!!!!
![Page 22: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/22.jpg)
18. Never light the torch if:
1. The ventilation fan is not on
2. There is already someone working at the soldering table
3. You don’t have someone to help you
![Page 23: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/23.jpg)
19. What should you do with the extra scrap metal you are not using?
A. Leave the scraps there for people to use
B. Put the scraps in the scrap boxes
C. Melt the scraps together with a torch
![Page 24: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/24.jpg)
20. If you have not received training on how to use a piece of equipment in the lab you should
A. Have a friend do your work for you
B. Figure that you will be excused from the assignment since you don’t know how
C. Ask the teacher to show you how to use the machine
D. Figure it out yourself
Just kidding!
![Page 25: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/25.jpg)
21. List 3 things you should do when using power tools:
1) Wear safety glasses & any other appropriate safety equipment.
2) Concentrate on your work, pay attention to what you are doing, work slowly and deliberately.
3. Stand with your feet directly in front of the machine.
![Page 26: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/26.jpg)
Before turning on a power tool you should know how to
Turn it off!
…. Silly !
![Page 27: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/27.jpg)
23. List 3 things you should do to protect yourself from harmful dust in the jewelry studio:
1. Clean up using a wet paper towel. (Wet Clean Up)
2. Wear a dust mask when using the flex-shaft or mixing investment.
3. Drinks should be in containers with a twist lid; keep the lid on when not drinking. (do not bring food into the lab on work days)
![Page 28: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/28.jpg)
24. List the 4 types of metal that can be cleaned in the pickle bath.
• Nickel• Brass• Copper• Sterling Silver
![Page 29: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/29.jpg)
25. Because of the steam from the crock pot with the Pickle Cleaning Solution, there is a certain way to lift the lid. What is it?
• Tip it away from you
![Page 30: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/30.jpg)
26. What is the best treatment for a burn from heat or flame?
Stop the burning by running it under cold water &/or ice pack.
![Page 31: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/31.jpg)
27. If you develop a rash or begin to itch you may have some of the acid from the Pickle on you. What should you do?
• Flush with cold water!!!!
![Page 32: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/32.jpg)
28. What should you do if you get a small cut that is bleeding?
• Rinse it in the sink w/ water & put a cute band aid on it.
![Page 33: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/33.jpg)
29. What should you do if you get a deep cut that bleeds profusely?
• Stop the bleeding by applying pressure. If you
have time, do this with a cloth or towel, or you could just use your hand.
• Get the teacher’s attention, and sit down to help you from going into shock.
![Page 34: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/34.jpg)
30. If you notice a drop of blood on the floor or table that is from an accident of one of your fellow
students, what should you do about it ?
• Don’t touch it. Tell me about it & I will
clean it up. • Do not clean it up yourself. There are
strict procedures for cleaning up bodily fluids at school, so I’ll take care of that sort of thing.
![Page 35: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/35.jpg)
31. What is the main cause of accidents in the jewelry room?
• It’s horseplay (goofing around and being unsafe around equipment).
• The next most common cause of accident is carelessness. This usually happens when students get a little over-confident and then get lazy about safety procedures.
• SO BE SMART AND BE CAREFUL!!!
![Page 36: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/36.jpg)
32. What is the most common type of injury in the jewelry room?
• CUTS• Surprise! NOT BURNS!
• My theory: most cuts happen when students are looking away from their projects while talking. AND, most of us can remember that
hot things burn.
![Page 37: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/37.jpg)
Just a thought:
• Most students never get hurt in the jewelry studio, not even little cuts.
• We go over safety rules at the beginning of the semester so that you can be aware of safety issues and be smart about working in the lab, so that you won’t get hurt.
![Page 38: Classroom Rules](https://reader036.vdocuments.us/reader036/viewer/2022081513/56816145550346895dd0c098/html5/thumbnails/38.jpg)
safety