classic & exotic service, inc. e-mail: parts...

Classic & Exotic Service, Inc.2032 Heide, Troy MI 48084 USAPhone: 1.248.269.9414E-mail: [email protected]: http://www.classicandexotic.com

SKU Product Name Price

Bolts, Nuts, Screws, Stems

BENT-0005

1931 Bentley Wheel Weight Carriage BoltCNC Machined steel wheel weight carriage bolt with a 1/4-26 thread. Foruse on 1931 Bentley with Rudge wheels. Material: 12L14; Finish: Natural; Thread: 1/4-26; Thread length: .546; Head OD: .625; OAL: 2.589; Lengthunder head: 2.453; Shaft OD: .241.

$ 13.00

CAD-0241

1930-33 Cadillac Lug Bolt, V8 V12 V16Lug bolt for use on 1930 - 1933 Cadillac and LaSalle models: 353 1930,355A 1931-33 V-8, 370A 1931 V-12 452A 1930 V-16; LaSalle 340 1930-32,345A 1933. Cadillac part number 872648, Group number 22.0395. 32 Usedper car. Material: Steel; Finish: Black oxide; Thread: 9/16-12; Threadlength: 1 3/16; Length: 1.512; Hex: 3/4.

$ 7.75

CHR-0003

1931 Chrysler Imperial Lug BoltSteel lug bolt for 1931 Chrysler Imperial wheel hubs, may also fit otheryears. Material: 4140, heat treat grade 8; Thread: 9/16-18 x 7/8; OAL: 17/8; Hex: 7/8; OD above thread: .556; Head height: .437.

$ 18.75

CHR-0007-A CHR-0007-B

1931 Chrysler CM6 Lug NutClosed end lug nut for use on 1931 Chrysler CM6. May also fit other yearsand models of Chrysler. Available in right and left hand thread. Material:4140 Pre heat treat; Finish: Natural; Thread: 9/16-18; Hex: 3/4; Hexheight: .720; OAL: .860; Seat height: .290; Seat at widest point: 1.060; Seat at narrowest point: .850.

$ 20.75

MISC-0259

Schrader Valve Stem NutStainless steel 12mm x 1.0 hex nut for use on cars using Schrader bentmetal valve stems. Material: Stainless steel; Thread: 12mm x 1.0; Hex:17.5mm (.6875); Hex height: 5.75mm (.226); Height: 8mm (.320); Nonhex OD: 15.5mm (.608).

$ 10.50

MISC-0317

Isotta Fraschini Lug NutBrass lug nut with an M14-1.50 thread for use on Isotta Fraschini. Material:Brass; Finish: Natural; Thread: M14 x 1.5; Thread length: 18mm; OAL:26mm; OD: 26mm; Hex: 18mm; Length under head: 17mm.

$ 23.25

MISC-0366

American Underslung Wheel BoltAmerican Underslung wheel bolt. Used to hold the wheel hub in the woodwheel. Duplicate of an original part from a 1910 Traveller. Material: Steel; Finish: Black oxide; Thread: 3/8-24; Thread length:.750; Head OD: .750; Head thickness: .270; Length under head: 2.45; OAL: 3.470.

$ 13.00

MISC-0406 Valve Stem Nut 5/8 HexValve stem nut for use on Duesenberg Model J and other prewar cars. Material: Brass; Thread: .482-26 NS; Hex: 3/4; Thickness: .320.

$ 8.25

MIT-0001

7/16-14 Wood Wheel Bolt ShortWood wheel bolt with 7/16-14 thread. Used for clamping the spoke in thesteel hub for wooden wheels as used on 1912 Mitchell and possibly others. Material: 4140 Steel, heat treated to grade 8; Finish: Natural; Thread:7/16-14; Thread length: 1.365; OAL: 2.725; Head: .763 OD x .350; Lengthunder head: 2.375.

$ 18.25

5/22/18. Prices subject to change. /6


MIT-0002

7/16-14 Wood Wheel Bolt LongWood wheel bolt with 7/16-14 thread. Used for clamping the spoke in thesteel hub for wooden wheels as used on 1912 Mitchell and possibly others. Material: 4140 Steel, heat treated to grade 8; Finish: Natural; Thread:7/16-14; Thread length: 1.365; OAL: 3.015; Head: .763 OD x .350; Lengthunder head: 2.665.

$ 18.25

NAT-0001

7/16-14 Wood Wheel Bolt Rim7/16-14 Steel bolt used on the rim of wooden automobile wheels such asthose used on 1910 National and possibly other early cars. Knurling gripsthe wood and prevents the bolt from spinning once installed. Material: 4140, heat treat grade 8; Finish: Natural; Thread: 7/16-14; Thread length: 1.093; OAL: 3.425; Length under head: 3.085; Head OD: .750; Square block:.475 x .475 x .084; Knurl length: .525.

$ 25.75

P-0096

1933-36 Packard V-12 and Auburn Wood Wheel BoltWheel bolt for use on 1933-1936 Packard V-12's using wood wheels. Thisbolt is the same as used on Auburns with wood wheels except this bolt isapproximately three threads longer. Bolt can be trimmed for use if needed. Packard part number 197945 ''Wheel Bolt (Wood)''. Fits Packard models:1001-04 1100-05 1200-05 1400-05. Material: 4140, heat trea grade 8; Finish: Cadmium; Thread: 9/16-18; OAL: 3.00; Hex: 3/4; Head height:.580.

$ 18.25

P-0116-B

1929 Packard Lug BoltLug bolt for use on 1929 Packard 633 may also fit other years and models.Note: Head shape has been slightly modified from the original bolt. Packardpart number 146107. Material: 4140 Steel, heat treat grade 8; Finish:Natural; Thread: 9/16-18; Thread length: .775; OAL: 4.04; Hex: 3/4; Length under head: 3.225; Head DIA: 1 1/16; Shaft DIA: 6/16.

$ 15.50

P-0128

1928 - 1932 Packard Disc Wheel Lug BoltPackard lug bolt used on 1928 - 1932 V-8's with disc wheels. This is anaccurate reproduction from a 1929 Packard. Packard part number 146106.For use on the following: 1928 526 533; 1929 626 633; 1930 726 733; 1932 826 833; 1932 901 902. Material: 4140, heat treat grade 8; Finish:Natural; Thread: 5/8-18; Thread length: 1.00; OAL: 2.072; Head hex: 3/4; Head height: .782; Length under head: 1.290.

$ 12.25

P-0173

1913 Packard Wheel Anchor BoltSteel threaded bolt with anchor shaped head. Used on the wheels of 1913Packard. Limited inventory. Material: Steel; Finish: Natural; Thread:1/2-18; Thread length: 1.062; OAL: 3.750; OD: .468; Length under head:3.400; Head: 1.250 L x .774 W; Head thickness: .180.

$ 8.25

P-0211

Packard Front Wheel Support Bushing Upper BoltPackard front wheel support bushing upper bolt. For use on Series 1506 1507 1508 1607 1608 1707 and 1708. Packard part number 32274. Material: 4140 Steel, heat treat grade 5; Finish: Natural; Thread: 11/16-16x .875; OAL: 4.375; Hex: 11/16; Head height: .297; Length under head:4.062.

$ 84.50

P-0211-A

Packard Front Wheel Support Bushing Upper Bolt NutPackard front wheel support bushing upper bolt nut. For use on Series 1506 1507 1508 1607 1608 1707 and 1708. Material: 8620 Steel; Finish:Natural; Thread: 11/16-16; Hex: 11/16; Thickness: .381.

$ 31.00

RR-0010

Rolls Royce PII Wheel Balance Weight NutNut to retain wheel balance weights installed on the wheel rim of RollsRoyce Phantom II. Material:12L14;Finish:Natural;Thread:1/4-26;Hex:29/64;OD:.450;OAL:1/2;Groove OD:3/8.

$ 21.75

/6 5/22/18. Prices subject to change.


RR-0016

Rolls Royce Phantom II Hub Cap ScrewSteel slotted screw to fit in center of wheel nut on Rolls Royce Phantom II. Material: 12L14 Finish: Natural Thread:;BSP 1/4-19 OD of thread: .515 Thread length: .250 OAL: .542 Length under head: .357 Head OD: .625

$ 18.75

TF-0001

7/16-20 Thomas Flyer Wheel Bolt7/16-20 Front wheel bolt for use on Thomas Flyer wooden wheels. Note:This item has an approximate delivery time of two weeks. Material: 4140Steel heat treat grade 8 Finish: Natural Thread: 7/16-20 Thread length:1.350 OAL: 3.625 Length under head: 3.350 Head OD: .900 Shaft OD:.4375

$ 25.75

Dyna Beads Tire Balancing

GTI-APP-01 Dyna Beads ApplicatorDyna Beads applicator bottle and fill tube. For use in placing beads in tire.

$ 4.00

GTI-COR-0120

Dyna Beads Filtered Valve CoreFiltered valve core for use with Dyna Beads tire balancing beads. Requiredfor use when Dyna Beads are installed to keep beads from escaping whenadding air or checking tire pressure.

$ 2.75

GTI-DSB-66 GTI-DSB-22

Dyna BeadsDyna Beads tire balancing beads for use in motorcycles and automobiles.Available in two sizes: six ounces or two ounces. Six ounce bag isrecommended for large full size tires such as those used on antique andclassic cars. Two ounce bag is recommended for motorcycle tires - typicaluse is two ounces in the rear tire and one ounce in the front. Filtered valvecore and applicator sold separately. Note: Base price shown is for a twoounce bag. six ounce bag is $14.75.

$ 7.25

Hubcaps, Discs, Springs

BUG-0052

Bugatti Type 49 HubcapNew aluminum hubcap for Bugatti Type 49. This aluminum casting with the''EB'' logo has been fully machined for use. Limited inventory. DIA: 6 1/2; Width: 2 1/4.

$ 386.25

J-6310 Duesenberg Model J Hubcap EmblemNew Model J Duesenberg hubcap emblem tag with red enamel letters. DIA: 1.691.

$ 24.25

J-6370

Buffalo Wire Wheel Hubcap Tension SpringBuffalo wire wheel hubcap tension spring. Fits inside the hubcap to keep thecenter in place. These have been produced in the correct length, diameterand wire gauge as the original springs. Four required per hubcap. Measures: 1.541 OAL; .378 OD; .056 wire diameter.

$ 7.75

J-6954-1 Buffalo C6 Wheel Wrench Tool BagCanvas bag to hold Buffalo wheel wrench for C6 Buffalo wire wheel hubcaps. For use with many cars using C6 Buffalo wire wheels.

$ 77.25

MISC-0447 Nil Melior Accessory Wheel Disc Acces Hole DoorNil Melior accessory wheel disc access hole door. Material: Brass; Finish:Natural; Length: 3.118; Width: 2.399; Thickness: .041.

$ 98.00

MISC-0196

Buffalo C4 Wheel Wrench Tool BagLeather trimmed tool bag for a Buffalo Wire Wheel wrench with an openingof 3 1/4. Made to fit wrenches with ''6505-B'' cast into them. Length: 16.00; Width top: 7.00; Width bottom: 3.00.

$ 67.00

MISC-0305

Duesenberg A Hubcap WrenchCustom made CNC machined aluminum hubcap wrench for use onDuesenberg Model A. Material: Aluminum; OAL: 10.00; OD: 4.375; HexID: 3.187; Thickness: .375; Hole: .500.

$ 206.00



RR-0001

Nil Melior Wheel Disc Valve Door NameplateNil Melior engraved nameplate used on the inflation valve access door forvarious sized wheel discs including those used on Rolls Royce PII and manyBrewster bodied cars. Material: Aluminum; Finish: Natural; OD: 1.978; Thickness: .062; Holes: .150; Hole centers: 1.250.

$ 36.25

RR-0002

Nil Melior Wheel Disc Valve Door Backing PlateBacking plate for the inflation valve access door assembly used on varioussized wheel discs including those used on Rolls Royce PII and manyBrewster bodied cars. Material: Steel Finish: Painted Thickness: .042 Length: 4.227 Width: 2.555 Holes: .150 ID 1.250 centers

$ 57.25

RR-0003

Nil Melior Wheel Disc Valve Door Plate SpringSpring plate for the inflation valve access door assembly used on varioussized wheel discs including those used on Rolls Royce PII and manyBrewster bodied cars. Finish: Painted Thickness: .062 Length: 3.187 Width: .500 Holes: .157 ID .620 centers

$ 39.75

RR-0005

Nil Melior Wheel Disc Valve Door Spacer PlateBrass spacer plate used in the inflation valve access door assembly onvarious sizes of wheel discs including those used on Rolls Royce PII andmany Brewster bodied cars. Material: Brass Finish: Natural Length:1.750 Width: .625 Thickness: .065 Folded thickness: .125 Holes: .157 ID .620 centers

$ 20.75

RR-0016

Rolls Royce Phantom II Hub Cap ScrewSteel slotted screw to fit in center of wheel nut on Rolls Royce Phantom II. Material: 12L14 Finish: Natural Thread:;BSP 1/4-19 OD of thread: .515 Thread length: .250 OAL: .542 Length under head: .357 Head OD: .625

$ 18.75

TUC-0002

Tucker Hubcap Emblem Backing PlateSteel backing plate for the hubcap emblems on Tucker automobiles. Material: Steel Finish: Black epoxy primer OD: 3.662 Thickness:; .045 Holes: .192 centers 1.437

$ 25.75

Weights

BENT-0005

1931 Bentley Wheel Weight Carriage BoltCNC Machined steel wheel weight carriage bolt with a 1/4-26 thread. Foruse on 1931 Bentley with Rudge wheels. Material: 12L14; Finish: Natural; Thread: 1/4-26; Thread length: .546; Head OD: .625; OAL: 2.589; Lengthunder head: 2.453; Shaft OD: .241.

$ 13.00

MISC-0001 Rim Type Wheel WeightCast bronze wheel weight that fits over the edge of drop center rims and is retained by a set screw.

$ 16.50

RR-0010

Rolls Royce PII Wheel Balance Weight NutNut to retain wheel balance weights installed on the wheel rim of RollsRoyce Phantom II. Material:12L14;Finish:Natural;Thread:1/4-26;Hex:29/64;OD:.450;OAL:1/2;Groove OD:3/8.

$ 21.75

RR-0128

Rolls Royce PII Wheel Balance WeightWheel balance weight for use on Rolls Royce Phantom II. Used with weightcover, our part number RR-0129. Material: Lead; Finish: Natural; Tolerance: +/- .010; OD: 1.560; ID: .290; Thickness: .125; Weight perpiece: 1.6oz, 44 grams.

$ 5.25

RR-0129

Rolls Royce Pahntom II Wheel Balance Weight CoverSteel wheel balance weight cover for use on Rolls Royce Phantom II.Material: 12L14 Steel; Finish: Natural; OD: 1.733; ID: 1.609; Thickness:.062; Height: 1.653.

$ 25.75

/6 5/22/18. Prices subject to change.


Wheel & Bearing Lock Plates, Seals

BUG-0001 Bugatti Type 57 Front Wheel Bearing Lock PlateLaser cut steel lock plate to hold Bugatti Type 57 front wheel bearings.

$ 11.00

CAD-0036

Cadillac V-16 Rear Wheel Bearing Lock PlateCadillac V-16 rear wheel bearing retaining nut lock plate. Manufactured fromhot rolled steel. Measures: 2.285 ID x 2.890 OD; spikes are approx. .400long x .325 wide tapering to .132.

$ 15.50

CAD-0087

1937 Cadillac Rear Axle to Brake Drum Nut Lock PlateLaser cut steel lock plate for the rear wheels on 1937 Cadillac. Material:Steel; Finish: Natural; Thickness: .060; Width: 1.795; Length: 2.797; ID:1.163; ''U'': .370 x .343, radius of 1.75

$ 15.50

CAD-0088

Cadillac V8 Rear Wheel Lock Plate SmallLaser cut rear axle to brake drum nut lock plate for use on the followingCadillac and LaSalle V8 models: 1936 Cadillac 36-60 and 1934 - 1936LaSalle 350 35-50 36-50. Cadillac part number 231254, group number2.0239. Material: Steel; Finish: Natural; Length: 2.460; Width: 1.642; Thickness: .057; ID: 1.000; Cutout DIA: .453.

$ 15.50

DEL-0045 Delage D8 120 Front Wheel SealFelt front wheel seal for use on Delage D8-120. OD: 2.50; ID: 1.715; Thickness: .297.

$ 10.50

MISC-0301 Dupont Front Wheel Bearing WasherLaser cut steel front wheel bearing washer for Dupont model 993. Material:Steel; OD: 2.177; ID: .885; Thickness: .132; Tab: .281 x .156.

$ 20.75

Wheel Wrench

A-4829

80mm Rudge Wheel Spanner WrenchSteel spanner wrench for 80mm Rudge wheels as used on DuesenbergModel A and other automobiles. CNC milled from 4140 high strength steel.Duplicate of the original design. Notes on size: 80mm refers to themaximum size of the outer bearing. Actual hub diameter is 102mmmeasured across the outside of the splines on the car and not the wheelitself.

$ 257.50

J-6954-1 Buffalo C6 Wheel Wrench Tool BagCanvas bag to hold Buffalo wheel wrench for C6 Buffalo wire wheel hubcaps. For use with many cars using C6 Buffalo wire wheels.

$ 77.25

MISC-0196

Buffalo C4 Wheel Wrench Tool BagLeather trimmed tool bag for a Buffalo Wire Wheel wrench with an openingof 3 1/4. Made to fit wrenches with ''6505-B'' cast into them. Length: 16.00; Width top: 7.00; Width bottom: 3.00.

$ 67.00

TAG-0054 Buffalo Wheel Wrench TagAluminum tag for use on Buffalo wheel wrench numbers 5 and 6. Widestpoint: 1.896; Narrowest point: .927; Length: 7.000; Thickness: .040.

$ 41.25

Wheels, Hubs, Rims

J-6300-1 Buffalo Wire Wheel Hub, 78 SpokesBuffalo wire wheel hub with 78 spokes. Drive convolutions are in excellentcondition. Fits Cadillac and Duesenberg. Outer ID: 6.00; Inner ID: 9.00.

$ 360.50


Terms and Conditions

Delivery

Returns

We ship worldwide Monday through Friday. Our normal handling time is 24 hours or less - manyorders ship the same day they are placed. Some items may require an additional handling time -see individual product descriptions for information. Expedited domestic shipping is through UPS. For expedited UPS shipping, orders must be receivedby 1PM EST. Orders received after 1PM EST will ship the next business day. UPS business daysare Monday - Friday. Next Day Air orders placed on Friday will be delivered on Monday. In some instances, non-expedited domestic orders may be shipped by USPS Priority Mail at ourdiscretion. If your order must be shipped by UPS Ground, please note that when placing yourorder. International shipping is through USPS Express Mail or UPS Worldwide services. We do not ship by Fedex - that includes domestic and international orders. Shipping cost is determined by package weight and shipment destination. Shipping cost for yourorder can be viewed in your shopping cart by entering a shipment destination. Please note that our warehouse is closed to the public and we are unable to accommodate localpickups of orders.

Items must be returned in new unused condition within 14 days of receipt. Items returned after 14days of receipt are subject to a 15% restocking fee. No returns will be accepted after 90 days fromthe original purchase date. Original shipping charges are non-refundable. Refunds will be issuedupon receipt and inspection of the returned item and will be issued in the manner payment wasreceived. For returns made after 60 days, refunds will be issued by check only. Items which are cut to order and sold by the foot and items made to customer specified lengths orwidths are not returnable. When returning an item, please include a copy of your original invoice and send the item to: Classic & Exotic Service, Inc.Attn: Returns2032 Heide (USPS only)2000 Heide (UPS, FedEx only)Troy, MI 48084 USA All returns must be mailed - we cannot accommodate in-person returns.

classic & exotic service, inc. e-mail: parts...

Documents