class iii “the cs-2000 is an indispensable appliance in my ... · cs-2ooo ® class ii & class...

6
Class II & Class III Corrector New Components! Class III Class II “The CS-2000 is an indispensable appliance in my treatment of Class III malocclusion.” Dr. Ted Bennion, DMD MS “A great appliance for Class II and Class III cases. Easy to place and highly effective!” Dr. Eric W. Brust, DDS MS ACTIVE PASSIVE The New & Improved Easy To Place Little To No Maintenance Reduced Breakage, Increased Control Up to 5mm of Correction • 350 Grams of Low Continuous Force

Upload: dinhtu

Post on 28-Jul-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

CS-2OOO®

Class II & Class III Corrector

New Components!

Class III

Class II

“The CS-2000 is an indispensable appliance in my treatment of

Class III malocclusion.” Dr. Ted Bennion, DMD MS

“A great appliance for Class II and Class III cases. Easy to

place and highly effective!” Dr. Eric W. Brust, DDS MS

ACTIVE

PASSIVE

ACTIVE

PASSIVE

The New & Improved

• Easy To Place

• Little To No Maintenance

• Reduced Breakage, Increased Control

• Up to 5mm of Correction

• 350 Grams of Low Continuous Force

Your Class II & Class III SolutionThis revolutionary system will guarantee results with your Class II and Class III orthodontic cases.

The CS-2000® Niti springs are a DynaFlex® exclusive, utilizing a patented, low-continuous force (350 grams), closed coil spring and a specially built “key-hole” end which fits over a

patented slotted base pivot similar to a Herbst® housing nut.

* For detailed information on Class III Correction, reference: “Class III correction using an inter-arch spring loaded module”.

Robert VanLaecken, DDS M.S., West Virginia University, Department of Orthodontics.

CS-2000® Niti springs are a DynaFlex® exclusive, & utilize a patented,

350 grams of low-continuous force.

Position (mm)

600

500

400

300

200

100

0

Load

(g)

10 20 30 40 50 60

CS-2000® SPRING

AFTER

Case photos compliments of Dr. Andy Hayes of St. Louis, MO

BEFORE

ACTIVE

PASSIVE

ACTIVE

PASSIVE

NEWLY RE-DESIGNED:The newly designed collared pivot allows for an arch wire to slide easily through the base

and reduces the possibility of abrasion. The new hybrid screw can be active or passive allowing you the ability to lock the pivot to the archwire, if desired. The pivot is designed to be used on the archwire or can also be welded to a band or crown for amazing versatility.

• Reduced Breakage• Simple• Effective• Guaranteed Results

Easy 10 minute Step By Step Instructions for Archwire Placement

Class II Class IIISTEP 1:

Place 2 pivots on the upper archwire, position pivots

distal to the upper canines, insert and ligate archwire

STEP 1: Place 2 pivots on the lower archwire, position pivots distal to the lower canines, insert and ligate archwire

STEP 2: Outside the mouth, assemble

a spring, screw and pivot combination. Place assembled

components onto the lower archwire. Insert and ligate

archwire positioning the pivots mesial to the lower first molars

STEP 2: Outside the mouth, assemble a spring, screw and pivot combination. Place assembled components onto the upper archwire. Insert and ligate archwire positioning the pivots mesial to the upper first molars

STEP 3: Using a hemostat, stretch

spring eyelet onto the upper pivot and secure in place

with a screw

STEP 3: Using a hemostat, stretch spring eyelet onto the lower pivot and secure in place with a screw

Tip: At subsequent visits, reposition the pivots or

change from 10mm springs to 7mm springs for further mandibular advancement

Tip: Spring should be allowed to move freely on pivot in Class II & Class III Cases.Class II Tip: No more than 2mm of mandibular advancement is recommended.

UPPER ARCH LOWER ARCH

Tip: For use in a passive position, simply break off the tip of the hybrid screw, allowing the pivot to move freely along archwire. For use in the active position, simply insert the screw into pivot and tighten to lock into desired position on the archwire. Actively locked on archwires larger than 016x022.

Example of Laboratory Options

There are multiple options to use CS-2000® in Class II & III along with upper and lower fixed appliances.

(upper view) (lower view)(laboratory option)

The CS-2000® Appliance has been used successfully for over 8 years with thousands of patients seeing remarkable

results with little to no compliance necessary.

Results Matter

Class III Treated Case

Class II Treated Case

Case photos compliments of Dr. Michael Williams of Gulfport, MS

BEFORE

AFTER

See CS-2000 educational animations

at www.dynaflex.com

Use your QR code reader to view or download a prescriptionor visit www.dynaflex.com.

BEFORE

PROGRESS

AFTER

Sterilizable Allen Pencil (optional)

CS-2000® 5-Patient Kit

Wire inserted into pivot

Screw

Pivot

10 mm 7 mmNiti Springs

#3800-5E 5-Patient Kit - 10mm includes 10 (10mm) CS-2000 Niti Springs, 20 slotted pivots, 20 hybrid screws & an Allen Pencil

#3815-7E 5-Patient Kit - 7mm includes 10 (7mm) CS-2000 Niti Springs, 20 slotted pivots, 20 hybrid screws & an Allen Pencil

#3800-10E 10-Patient Kit - 10mm includes 20 (10mm) CS-2000 Niti Springs, 40 slotted pivots, 40 hybrid screws & an Allen Pencil

#3809 CS-2000® Niti Spring 10mm

#3811 CS-2000® Niti Spring 7mm

#3810-E Pivot with Slotted Base .022 x .025

#3815-5E Screw for pivot

#3823-E Allen pencil (sterilizable)

Part # Description Price

“The Dynaflex® CS-2000® appliance has greatly improved our abilities to correct Class III malocclusions. We love how easy it is to place and it is as durable a product as I have used for inter-arch correction. The design is excellent and we have improved our overall results while shortening our treatment time using this product. We do really enjoy using these appliances, and they have not only held-up well, they really work.”

– Dr. Anthony Harwell and Dr. Tony Harwell

“The CS-2000® is by far the most efficient and

patient-friendly appliance on the market for dental

correction of Class III malocclusions.

For my nonsurgical adolescent and

adult class III patients, you could

say “it’s the only

game in town.”

Dr. Andy Hayes, DDS, MSD

St. Louis Orthodontic Group

011114 © 2014 DynaFlex® , St. Louis, MO 63074. Printed in U.S.A. All rights reserved. It is a violation of copyright law to reproduce all or part of this material, including photography, without the permission of DynaFlex®. CS-2000® patent pending. Spring Patent 6719557

“The introduction of the CS-2000® springs has been an extraordinary addition to our practice. Patient compliance

with elastics is no longer an issue!”

Dr. Mel Collazo DDS, MS, PA Collazo Orthodontics • Little Rock, Arkansas

Quickly Becoming The MOST ADVANCED & EASIEST TO USE

Class II & Class III Corrector Available Today!

Case photos compliments of Dr. Andy Hayes of St. Louis, MO

BEFORE PROGRESS AFTER

PROVEN RESULTS!

Greiner Orthodontics GmbH Im Schröder 43D- 75228 Ispringen