cla-val offshore fire products
TRANSCRIPT
Fire Protection Solutionsfor offshore and onshore applications
Deluge • Pressure Relief • Pressure ReducingLevel Control • Solenoid Control • Air Release and Check Valves
power plants
commercial high-riserailway and
road tunnels
refineries andindustrial facilities
chemical storage
aviation facilitiesmining operations
M E AAPPROVED
SINGAPOREPUB
offshore platforms
Deluge Valve Applications
Cla-Val Deluge Valves are available in a variety of configurations and sizes,providing highly accurate performance in the most demanding of fireprotection applications.
• Hydraulic, Pneumatic or Electronic-Controlled Operation
• Fast-Acting, Drip-Tight Closure
• Available in a wide range of materials to meet uniqueapplication requirements
Chemical andflammable materials
storage
Rail and roadwaytunnels
Water curtainsystems
Aviation facilities
Helicopter LandingPads
Power PlantsMining Operations
Refineries
water cannonwater cannon
FLAMMABLE LIQUID
Typical Applications
Industrial Fire Protection Deluge Valve Applications
FLAMMABLE LIQUIDEA Q
flow
Water Curtain for Flammable Materials Storage
Water Cannon for Flammable Materials Storage
CLA-VAL 403-11Deluge Valve
for water or foam
CLA-VAL 134-05Deluge Valve
visit www.cla-val.com foradditional technical data onthis and other Cla-Val Fire
Protection Products
Deluge Valves
134 Series Solenoid Operated Deluge Valve
800 Series Tubular Diaphragm Fire Deluge Valve
Model 834-05
400 Series Pneumatically Operated Remote Control Deluge Valve
Model 134-05
Model 403-27
• Fast acting solenoid control• Reliable drip-tight shut-off• Utilizes a three-way solenoid
to open or close the valve• Globe or angle patterns• 150 and 300 Class • UL Listed 3” - 10”• For water or foam
• Reliable deluge service for fresh or seawater applications
• Quick response to remotecontrol operation
• 150 and 300 Class• Ideal for pressure up to 400 psi• UL Listed 3” - 10” • For water or foam
• Pressure operated in-line axialvalve ideal for fire delugeapplications
• Unique tubular diaphragm valve• Cast and stainless steel
construction for long service life• FM Approved 4” - 10” • For water or foam
Isolation Valve
Main FireHeader Piping
Sprinkler Piping
FLAMMABLE LIQUID
CLA-VAL 834-05 Deluge Valve
Fire Monitor
CLA-VAL 134-05or 403-27
Deluge Valve
CLA-VALCLA-VAL
Deck Integrated Fire Fighting System (DIFFS) for Helipads
The DIFFS utilizes the Cla-ValModel 134-60 Automatic DelugeControl Valve to quickly dispensefoam or water, extinguishingflames in less than 15 seconds.
CLA-VAL 134-60
Deluge Valve
Pressure Reducing and Pressure Relief Valve Applications
Cla-Val Pressure Reducing Valves are available in a variety ofconfigurations. Their superior design provides highly accurateand reliable performance in fire protection piping systems.
• Flanged, Threaded or Grooved Ends
• Available in a wide range of materials to meet uniqueapplication requirements
High-Rise buildings
High pressuresprinkler system
Fire Hydrant Supply
Tunnels and under-ground railways
Ports, harbors andcargo storage areas
Manufacturing plant
123 Park Avenueto Fire Service
Piping
Fire Pumpfrom city supply system
Sensing Line
Typical Applications
Pressure Reducing/Pressure Relief Valve Application
Fire Pump Suction Control Valve ApplicationModel 55L
55 Series Pressure Relief Valve
• Direct acting for precise pressure control• May be installed in any position, making
it ideal for tight locations• Operates within very close pressure limits• UL Listed, FM Approved 1/2” and 3/4”
FLOW
33A High PerformanceCombination Air Release& Vacuum Breaker Valve
581 Check Valve
Blow-OffTee and
Valve
MainGateValve
Shut-Off
System
Fire Pump Pressure Relief Valve Application
CLA-VAL 2050B-4KG-1Pressure Relief Valve
UL/FM
CLA-VAL 90-21 PressureReducing Valve
CLA-VAL 55LPressure Relief Valve
50B-5KG
Pressure Reducing and Pressure Relief Valves
90 Series Hydraulic Pressure Reducing Valve
850 Series Tubular DiaphragmFire Relief Valve
Model 850B-4
50 Series Fire Pump Pressure Relief Valve
Model 90-21
Model 50B-4KG-1
Model 750B-4KG-1
750 Series Pressure Relief Valve
Modulates upon fire pumpstart-up to relieve excesscapacity, while maintainingpositive system pressure atthe pump discharge andpreventing surge.
Automatically relieves excess pressurein fire protection pumping applications,while maintaining constant systempressure at the pump discharge.• 316 SST construction • Compact
Unique tubular diaphragm design withbuilt-in protection against cavitationprovides fast-acting deluge servicewith very low head loss.
Model 50B-5KG
Model 90-21 Grooved
FLOW
33A High PerformanceCombination Air Release& Vacuum Breaker Valve
581 Check Valve
Blow-Off Tee and
Valve
Main Gate Valve
Shut-Off
System
33A Air Valve582 Series
Check Valve
X43HLH-Strainer
flow
flow
CLA-VAL 750B-4KG-1
Pressure ReliefValve
CLA-VAL 850B-4 Series
Pressure Relief TDVFM Approved
50 Series Pump Suction Relief Valve Modulates to prevent pumpsuction pressure fromdropping below a pre-setminimum, ensuring that thepump draw does not exceedthe available water supply.
The valve automaticallyreduces a higher inletpressure to a steady, loweroutlet pressure, regardlessof flow or inlet pressurefluctuations.
• UL Listed 1-1/2” - 8”
UL & ULC Listed, FM Approved
UL Listed 3” - 10”
FM Approved3” & 4”
FM Approved3” - 10”
FM Approved 3” - 8”
Cla-Val Fire ProtectionProducts are available ina wide range of standard
and special alloys
Automatic Breach Containment Valve
The Cla-Val Automatic Breach Containment Valve (ABCV) isolatesportions of distribution piping when catastrophic downstream breachesoccur. The ABCV is ideal in commercial building water distributionsystems, including fire protection, potable water service, or chilled watercirculation.
Strategically located to isolate portions of water systems, the ABCVprevents significant water losses and resultant damage, while allowinglimited continued service when distribution systems are damaged or outof service.
High-Rise buildings
High pressuresprinkler systems
Typical Applications Model 85-09-1 Automatic Breach Control Valve
85-09-1 Breach Containment Valve Application:High Rise Fire Protection Systems
Public buildings
Historicallandmarks
Cla-Val Automatic Breach Control Valveinstallation - tallest high-rise building in the
United States (1,776 ft)
Fire Water Storage Tank Level Control Valves
124 Series Float Control Valve
stilling well
supply
fire water storage tank
Level Control Valve Application
210 Series Altitude Control Valves
Fire Waterdistribution
fromsource
sensingline
Altitude Valve Application
IsolationValves
Reserve Fire Water Storage Tank
Control Piping(Not Furnished)
Float Control
129 Series Float Control Valve
The 124 Series Float Valveprovides an effective meansof controlling the liquid level infire water reserve tanks,opening or closing when theliquid level reaches its pre-setlow and high points.
CLA-VAL Model124-01 Level Control Valve
CLA-VAL Model129-01 Level Control Valve
CLA-VAL 210-01/610-01Altitude Valve
The highly accurate 129Series Float Valve maintainsa consistent level in largediameter fire water storagetanks and reservoirs byadmitting flow into the tank indirect proportion to flow out ofthe tank.
The 210 Series Altitude Valve is commonly used atreservoirs where water is withdrawn through aseparate line or through a bypass line. The valveopens to refill the reservoir when the water reachesa point below the pre-set shut-off level. It is availablein a variety of configurations including thosedesigned for one-way flow and combination altitudeand back pressure control.
Air Release Valves • Check Valves • Strainers
33 Series Air Release andVacuum Breaker Valves
Air Release and Check Valve Application - Industrial Pump House:- 33A High Performance Combination Air Release & Vacuum Breaker Valve with Series TD Throttling Air Control Device
- 500 Series Check Valve
500 Series Check Valves34 Series Air Release Valve
Shut-Off Valve
FLOW
Well Casing
Pump Column
Air Line
AirlineGauge
Meter
Blow-OffTee and
ValveMainGateValve
SampleCock
33 Series High PerformanceCombination Air Release andVacuum Breaker Valves protectpipelines from air lock and vacuumcollapse. Its large venting orifice andfloat clearances freely exhaust or admitair during pipeline filling or draining.
34 Series Air Release Valves vententrained air that collects at high pointsin a pipeline, preventing againstdecreased flow capacity and thepossibility of complete air blockage andpipe rupture caused by excessive airaccumulation.
500 Series Check Valves protectagainst flow reversal and water hammer.They are available in silent wafer, silentglobe and two-door wafer checkconfigurations as well as a broad rangeof materials.
Model 580Silent WaferCheck Valve
- FM Approved
Model 581Silent GlobeCheck Valve
- FM Approved
Model 582Silent GlobeCheck Valve- UL Listed
- FM Approved
CLA-VALX43 H-Strainer
Model X43H-Strainer for Fire
Protection Applications
The X43 H-Style Straineroffers an effective means ofremoving unwanted particlesor debris in pipeline flow. Idealfor mounting to directly to anyCla-Val Automatic ControlValve, the H-Strainers largeflow area ensures a lowpressure drop.
Its unique design enablesmaintenance personnel toservice or clean the strainer bysimply removing the top cover.
X43 H-Strainer Typical Application -Protecting system equipment from pipeline debris
CLA-VAL 33AAir Release Valve
Model 33AFlanged
Model 33AThreaded
Model 34Threaded
CLA-VAL 581 Check Valve
1” - 6” 1/2” - 2”
Offshore Applications
Seawater Service Deluge Valve• UL Listed - Sizes 3” - 10”• Globe and angle patterns• Aluminum Nickel Bronze • Controls water flow to deluge,pre-action or foam-water type sprinkler systems
• Ideal for seawater service• UL/ULC Listed Models100G/2100G also availablefor freshwater service
Pneumatically OperatedDeluge Valve• UL Listed - Sizes 3” - 10”• Globe and angle patterns• Ideal for applications whereremote on-off control is required
• Suitable for freshwater or seawater service
Model 100GS/2100GS
Model 403-11Solenoid Control Valve for Seawater Deluge Service• UL Listed - Sizes 3” - 10”• Opens or closes upon receipt of anelectrical signal
• Ideal for applications where remoteon-off control is required
• Suitable for seawater service
Model 134-60
Model 100GS Ti
Seawater Service Deluge Valve• UL Listed - Sizes 3” - 10”• Globe and angle patterns• Aluminum Nickel Bronze • Controls water flow to deluge,pre-action or foam-water type sprinkler systems
• Ideal for seawater service• UL/ULC Listed Models100G/2100G also availablefor freshwater service
Cla-Val Fire Deluge Valves for offshoreand seawater applications are
manufactured in the USA
Special alloy castings are poured incompany-owned foundries in the USA.
UL®
LISTED
C
Offshore Applications
Seawater Service Pressure Relief Valve
• Sizes 1-1/14” - 24” • Automatically relieves excesspressure in pumping systems
• Fast opening to maintainsteady line pressure
• Closes gradually to prevent surge• Adjustable pressure settings,unaffected by pressure at valve discharge
H Style Strainer with Rapid Purge• UL Listed - Sizes 2” - 8”• Low pressure drop• Ductile iron fusion bonded epoxycoated body with 316 SS straineror Nickel Aluminum Bronze withTitanium strainer
• Large flow area H-style design• Service without removal from line
Model 50-20
Model X43-HLSeawater Service Pump Start Pressure Relief Valve• Sizes 1-1/4” - 24”• Provides pump and pipelineprotection during pump start sequence
• Protects pump when dischargerises to unsafe levels
• Adjustable pressure sensitive opening
Model 50-49
Model 33A
High Performance Combination AirRelease/Vacuum Breaker Valve• Sizes 1” - 6”, threaded or flanged• Installed at vertical turbine pumpdischarge and pipeline high pointsfor air release
• Protects pipeline from air lock andvacuum collapse during filling ordraining
• Available with AC throttling aircontrol device
Offshore Platform
Seawater Service Pressure Reducing Valve• Sizes 1-1/4” - 24”• Automatically reduces higher inletpressure to a steady, lower outlet pressure
Model 90-42
visit www.cla-val.comto download additionaltechnical documents
Two-Door Check Valve• Sizes 4” - 24”• FM Approved sizes 4” - 12”• Aluminum Bronze or Super DuplexStainless Steel for corrosion resistance
• Prevents reverse flowe
Series 582SWS
Value Added Products and Accessories
KO Anti-Cavitation Trim Retrofit KitRetrofittable to any Cla-ValAutomatic Control Valvewithout removal from thepipeline
Pressure SwitchThis durable, explosionproof Pressure Switch isused to signal that a delugevalve has opened. It can bespecified on a new valve oreasily retrofitted to anexisting valve in the field.
X46 and X43 Strainers
X46A
X46 and X43 SeriesStrainers prevents passageof foreign particles largerthan .015 inches fromentering pilot system tubing.
Limit Switch Assembly
X105L
The X105L Limit SwitchAssembly is a rugged,dependable and positive-acting switch actuated bythe opening or closing of aCla-Val Automatic ControlValve.
X43Y
CRD Pressure Reducing Pilot Control
Automatically reduces higherinlet pressure to a lower outputpressure. Can be retrofitted toan existing valve for addedcontrol.
CRL Pressure & Casing Relief Pilot ControlThe direct-acting CRL Pressureand Casing Relief Pilot Controlis a highly accurate means ofmaintaining desired pressure inthe most critical of fire protectionapplications.
100G/2100G Deluge Valve (Globe or Angle)Designed for use incontrolling water flow todeluge, pre-action or foam-water type fire protectionsprinkler systems
UL Listed in sizes 3” - 10”.
Waste ConeThe Fire Pump Discharge ReliefWaste Cone is manufactured inaccordance with NFPA 20requirements
The Stainless Steel X140Pressure Gauge, available insizes 2.5 and 4-inches, is aneasily retrofittable solution inapplications where visualpressure indication is desired.
X141 Pressure Gauge
Solenoid ValveDirect Acting High Flow/HighPressure Valves are available innormally closed, normally open,and either AC or DC operatedwith brass or SS bodies.
All classes of service: generalpurpose to hazardous location.
Automatic AirMaintenance Panel
The Automatic Air MaintenancePanel, automatically maintains theair or nitrogen pressure withinpreset limits in a dry pipe sprinklersystem or a dry pilot line whichactuate Deluge or Pre-actionsystem.
WHEN BELL RINGSCALL FIRE DEPT.
OR POLICE
Water Gong AlarmDurable and rugged, thehydraulically operated watergong outdoor alarm is idealfor use with fire protectionsystem water flow detectionvalves.
Experience & Capabilities
For more than 50 years, Cla-Val has supplied top quality automatic control valves for fire applications in facilities throughoutthe world. Typical applications include pressure regulation, pressure relief, rate of flow control, pump suction control, liquidlevel control and foam or water deluge.
Cla-Val control valves provide years of trouble-free operation and require minimal maintenance, backed by the assurancethat comes from using the industryʼs most trusted fire protection valves.
Cla-Val is a global company, headquartered in Southern California, with production facilities and offices in the US,Canada, Europe, and New Zealand, supported by a network of technical experts around the world.
TEC
HNICAL STANDARD
S
&SAFETY AUTORIT
Y
T S S AM E AAPPROVED
UL®
LISTED
C
Canadian Standards Association (CSA)NYC Material & Equipment Acceptance Division (MEA)
Underwriterʼs Laboratories (UL)Underwriterʼs Laboratories Canada (ULC)
FM Global Technologies LLC (FM)Technical Standards & Safety Authority
Public Utilities Board SingaporeDepartment of the Navy
Soundcast Company: TUV ApprovalInternational Organization for Standardization (ISO)
When protecting life and property, you can count on Cla-Val Fire Protection Products.
Certifications, Approvals and Quality Assurance
SINGAPOREPUB
Cla-Val USA - So. California
20-acre foundry and
manufacturing operation
Cla-Val Europe - SwitzerlandCla-Val Canada
Cla-Val United Kingdom
Cla-Val France
Cla-Val Pacific -
New Zealand
Global presence...local expertise
Sample of Available Materials
• ASTM B367, Grade C2 Titanium • Monel QQ-N-288 Comp B
• ASTM A536-65 Ductile Iron • ASTM A216 WCB Cast Steel
• ASTM B148 Alloy C95800 NI. Alum. Bronze • ASTM B61 Naval Bronze
• UNS S31254 Super Austinetic Stainless Steel • UNS S32760 Duplex Stainless Steel
• UNS J93404 Super Duplex Stainless Steel • ASTM A-743 GR CF 8M 316 SS
Cutting Edge Manufacturing Technology
The production processes at Cla-Valʼs factories are a unique combination of the latest in machining technologies and more than 75years of manufacturing know-how. Never content to rest on our laurels, Cla-Val continually reinvests in machines, processes and ourpeople to ensure that each valve we produce is of the highest quality possible.
Product Advantages• Significantly reduces noise and vibration• Eliminates valve body and internal trim cavitation• Provides drip-tight, positive sealing• KO trim can be installed in existing valves withoutremoval of the valve from pipeline
• Cla-Valʼs proprietary CLA-CAV software is an ideal way to analyze your distribution system to determine the potential for cavitation.• Any Cla-Val automatic control valve can be equipped with KO Anti-Cavitation trim to minimize or alleviate cavitation damage.
Cavitation Protection
By having our own on-site sand casting and investment foundries, we are able to provide fire protectionvalves in over 50 different metals and special alloys, making Cla-Valʼs product offering one of the mostextensive in the valve industry. Combined with our state-of-the-industry manufacturing capabilities, wecan exercise maximum control over the quality of the valves we produce -- from start to finish.
Cla-Val automatic control valves can be provided in a wide variety of metals to meet anyapplication challenge.
In-house Foundry Capabilities
Contact factory for a complete list of available metals and special alloys
patented
When protecting life and property, depend on Cla-Val.
GLOBAL HEADQUARTERSP.O. Box 1325 Newport Beach, CA 92659-0325Phone: (949) 722-48001-800-942-6326 Fax: (949) 548-5441E-mail: [email protected]
CLA-VAL CANADA4687 Christie DriveBeamsville, Ontario Canada L0R 1B4Phone: (905) 563-4963Fax: (905) 563-4040 E-mail: [email protected]
CLA-VAL EUROPEChemin dés Mesanges 1CH-1032 Romanel/LausanneSwitzerlandPhone: 41-21-643-15-55Fax: 41-21-643-15-50 E-mail: [email protected]
CLA-VAL UKDainton HouseGoods Station RoadGB - Tunbridge WellsKent TN1 2 DHEnglandPhone: 44-1892-514-400Fax: 44-1892-543-423 E-mail: [email protected]
CLA-VAL FRANCEPorte du Grand Lyon 1ZI de Champ du PérierFrance - 01700 NeyonPhone: 33-4-72-25-92-93Fax: 33-4-72-25-04-17 E-mail: [email protected]
WESTERN REGION11626 Sterling Avenue, Suite FRiverside, CA 92503Phone: (951) 687-91451-800-247-9090Fax: (951) 687-9954E-mail: [email protected]
SOUTHERN REGION8707 Forney RoadDallas, TX 75227Phone: (214) 388-934931-800-533-8181Fax: (214) 381-9579E-mail: [email protected]
NORTHERN REGION280 Willard AvenueElgin, IL 60120Phone: (847) 697-14131-800-238-7070Fax: (847) 697-5549 E-mail: [email protected]
EASTERN REGION6911 Richmond Highway,Suite 444Alexandria, VA 22306Phone: (703) 721-19231-800-451-3030Fax: (703) 721-1927E-mail: [email protected]
CLA-VAL PACIFIC REGION306 Port Hills Road (Level Two)Woolston, Christchurch, 8042New ZealandPhone: (64) 39644860Fax: (64) 39644876E-mail: [email protected]
www.cla-val.com • 800.942.6326 Cla-Val Fire Onshore and Offshore Applications Brochure - 01/2012