ck65 quick start guide · 2019. 4. 30. · restart the mobile computer you may need to restart the...

16
Dolphin™ CK65 powered by Android™ Quick Start Guide CK65-A-EN-QS-01 Rev A 4/19

Upload: others

Post on 14-Feb-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

  • Dolphin™ CK65 powered by Android™

    Quick Start Guide

    CK65-A-EN-QS-01 Rev A4/19

  • Out of the BoxMake sure that your shipping box contains these items: • CK65 mobile computer

    (Model CK65L0N)

    • Rechargeable 3.6 VDC Li-ion battery

    • Hand strap

    • Product documentation

    If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service.

    Memory Card SpecificationsHoneywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with Dolphin mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options.

    2

  • Mobile Computer Features

    Microphone

    Power Button

    Ambient Light SensorTouch Panel

    Keyboard(model dependent)

    Notification/Scan/Battery Status LEDs

    Imager (LED / Laser Aperture)

    Keypad Status LEDs

    Scan Buttons

    All Imagers

    3

  • Camera Lensand Flash

    Battery Latch(under hand strap)

    Laser Safety Label Location

    Scan/Aux Button

    Hand Strap

    I/O Connector

    Scan/AuxButton

    CK65 Model with N6703 Imager

    MicroSD Card Door(battery and hand strap removed)

    All CK65 Units

    4

  • Camera Lensand Flash

    MicroSD Card Door(battery and hand strap removed)

    Battery Latch(under hand strap)

    Laser Safety Label Location

    Scan/Aux Button

    Hand Strap

    I/O Connector

    Scan/AuxButton

    CK65 Model with EX20 Imager

    All CK65 Units

    5

  • Install a microSD Card (Optional)

    See Install the Battery for hand strap release information. Format the microSD card before initial use.

    Always power off the computer before attempting to install or remove a card.

    1 2

    4

    3

    6

  • Install the BatteryThe CK65 mobile computer ships with a Li-ion 3.6 VDC, 18 watt-hour battery manufactured for Honeywell International Inc.

    Use only Honeywell Li-ion battery pack models AB17, AB18, and 1001AB01.

    Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty.

    1

    23

    4

    7

  • Charge the Mobile Computer The CK65 mobile computer ships with a partially charged battery. Charge the battery with a CK3 Series charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge.

    CK65 mobile computers are designed for use with CK3 Series charging accessories.

    We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.

    Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

    8

  • Turn Power On/OffThe first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled).To turn the computer on:• Press and hold the Power button for approximately 3 seconds,

    and then release.

    To turn the computer off:

    1. Press and hold the Power button until the options menu appears.

    2. Touch Power off.

    Battery ReplacementSwap Battery ModeYou should always place the computer in Swap Battery mode before removing the battery. Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. To activate Swap Battery mode:

    1. Press and hold the Power button until the options menu appears.

    2. Touch Swap Battery and follow the on-screen instructions.

    3. Once you replace the battery, press the Power button.

    9

  • Sleep ModeSleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time.

    1. Press and release the Power button to wake the computer.

    2. Drag the toward the top of the display to unlock the computer.

    Adjust the Display Sleep TimeTo adjust the amount of time before the display sleeps after inactivity:

    1. Touch > Settings > Display > Advanced > Sleep.

    2. Select the amount of time before the display goes to sleep.

    3. Touch to return to the Home screen.

    10

  • About the Home ScreenNotification /Status Bar

    Search Bar

    Touch to initiate a voice search or command.

    Home Screen Panel

    Touch to access all apps.

    Favorites Tray

    Navigation Buttons

    11

  • Navigation and Function ButtonsFor button locations, see Mobile Computer Features.

    Button Description

    Back Return to the previous screen.

    Home Return to the Home screen.

    Recent Apps View and switch between recently used apps.

    Scan Press the right, left or front scan button to trigger the scanner.

    12

  • About Provisioning ModeAfter completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide.

    Scan a Bar Code with the Scan DemoNote: For optimum performance, avoid reflections by scanning the bar

    code at a slight angle.

    1. Touch > Demos > Scan Demo.

    2. Point the computer at the bar code.

    3. Touch Scan on the touch screen or press and hold any Scan button. Center the aiming beam over the bar code.

    The decode results appear on the screen.

    Note: In the Scan Demo app, not all bar code symbologies are enabled by default. If a bar code does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide.

    13

  • Sync DataTo move files between your CK65 and a computer:

    1. Connect the CK65 to your computer using a USB charge/communication accessory.

    2. On the CK65, swipe down from the top of the screen to see the notifications panel.

    3. Touch the Android System USB Connection notification twice, to open the options menu.

    4. Select either Transfer files or Transfer photos (PTP).

    5. Open the file browser on your computer.

    6. Browse to the CK65. You can now copy, delete and move files or folders between the computer and CK65 as you would with any other storage drive (e.g., cut and paste or drag and drop).

    Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser.

    14

  • Restart the Mobile ComputerYou may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up.

    1. Press and hold the Power button until the options menu appears.

    2. Select Restart.

    To restart the computer if the touch panel display is unresponsive:• Press and hold the Power button for approximately 8 seconds

    until the computer restarts.

    Note: To learn about advanced reset options, see the user guide.

    SupportTo search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to www.hsmcontactsupport.com.

    DocumentationProduct documentation is available at www.honeywellaidc.com.

    15

  • Limited WarrantyFor warranty information, go to www.honeywellaidc.com and click Get Resources > Product Warranty.

    PatentsFor patent information, see www.hsmpats.com.

    TrademarksGoogle, Android, Google Play and other marks are trademarks of Google LLC.

    DisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.Copyright © 2019 Honeywell International Inc. All rights reserved.

    16

    Dolphin™ CK65Out of the BoxMemory Card SpecificationsMobile Computer FeaturesInstall a microSD Card (Optional)Install the BatteryCharge the Mobile ComputerTurn Power On/OffBattery ReplacementSleep ModeAbout the Home ScreenNavigation and Function ButtonsAbout Provisioning ModeScan a Bar Code with the Scan DemoSync DataRestart the Mobile ComputerSupportDocumentationLimited WarrantyPatentsTrademarksDisclaimer