ck 1000 light alarm project
DESCRIPTION
CK 1000 LIGHT ALARM Project. IME-458 Spring 2014 Final Project Fabiano Reuter Mechanical Engineering. Design. The CK1000 Sounds an alarm when light is detected using the following: HEF14011B IC , a 4 NAND Gate IC -handles logic - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/1.jpg)
IME -458 SPRING 2014FINAL PROJECT
FABIANO REUTERMECHANICAL ENGINEERING
CK 1000 LIGHT ALARM Project
![Page 2: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/2.jpg)
The CK1000 Sounds an alarm when light is detected using the following: HEF14011B IC , a 4 NAND Gate IC -handles logic Photoconductive photocell a.k.a. Light dependent
resistor (LDR)- senses light Trimpot potentiometer- adjusts resistance in “tank”
circuit
Design
![Page 3: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/3.jpg)
Logic Circuit
• The HEF14011B IC, also known as 14-pin dual inline package (14-DIP), is a quad NAND gate interconnect (there are 4 of them), 2 inputs, 2 outputs.
• It is wired up to oscillate when the input to it goes high, that is the BC557 transistor (Q2) turns on after light is detected by the LDR. The oscillating output from the HEF14011B IC turns the BC547 transistor (Q1) on and off.
• When Q1 is ON, the tank circuit (the choke and the piezo buzzer), charges up. When the Q1 turns OFF the piezo (which acts as a capacitor) discharges into the choke and makes a 'click' as it does so.
![Page 4: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/4.jpg)
Sensing Light
The PDV-P7002 are (CdS), photoconductive photocells designed to sense light from 400 to 700 nm. These light dependent resistors (LDR) are available in a wide range of resistance values. They are packaged in a two leaded plastic-coated ceramic header.
![Page 5: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/5.jpg)
PCB Schematic
![Page 6: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/6.jpg)
PCB Layout
![Page 7: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/7.jpg)
Finished Product
![Page 8: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/8.jpg)
AssemblyAll components are through-holeSoldered to boardComponents arranged with DIP Trace to
minimize board size.DIP-14 Mount allows for replacement of the
IC unit in case of damage.
![Page 9: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/9.jpg)
Wooden Chest
Sound turns off in about 3-5 seconds after lid is shut.
![Page 10: CK 1000 LIGHT ALARM Project](https://reader033.vdocuments.us/reader033/viewer/2022050616/56815f65550346895dce5cd2/html5/thumbnails/10.jpg)
Questions?