civil engineering know-how - cooper and turner€¢ electroplated zinc coatings to bs7371 part 3 •...
TRANSCRIPT
civil engineeringknow-how
C O N S T R U C T I O N I W I N D E N E R G Y I T U N N E L L I N G I R A I L I O E M
introduction
Along with sister company, Cooper & Turner,
the ‘group’ companies provide a true ‘one stop
shop’ in the manufacture, fabrication and
supply of industrial fasteners to the civil
engineering market with all of the cost and
control benefits that this management of the
whole supply chain brings.
Indeed, the companies have been at the
forefront of industrial fastener supply for more
than 160 years. The group continues to be a
leading authority in this market, both in the UK
and abroad, advising and developing innovative,
bespoke products to satisfy the exacting
requirements of the construction industry
The combination of a comprehensive product
range coupled with quality fastener
manufacturing and full product traceability has
meant that the McLean Buchanan & Wilson
name is both well known and trusted in this
demanding marketplace. Key to this is the
respect that the construction market holds for
the company’s range of added value services
that typically include - product picking,
shipping to challenging deadlines and
destinations and the ability
to trace key products
back to the
batch.
McLean Buchanan & Wilson is a well established UK company with an enviable pedigree
in the supply of industrial fasteners to the civil engineering and construction markets.
Civil Engineering Services
McLean Buchanan & Wilson provides a total
supply package to the civil engineering industry
delivering direct to sites throughout the UK
and abroad. The company has a particular
expertise in manufacture and fabrication along
with picking, packing and labelling of
comprehensive bolt lists, in construction
phases, and delivering against time-slot
schedules to rural and inner-city sites. Product
can also be supplied packed and labelled to
export standards with all of the necessary
completed documentation.
Packing Specifications
Following detailed feedback from some major
customers, McLean Buchanan &Wilson has
developed a number of packing specifications
and procedures specifically designed to aid civil
engineers. These systems have resulted in
tangible time and cost savings in the ever
tightening time demands of
construction projects.
Batch Traceability
All fasteners of grade 8.8 and above are totally
batch-traceable. The company has developed a
specialised stock control system that maintains
total lot-traceability by linking batch identity
numbers to despatch documentation and
customer orders. Test certificates can be
supplied with goods and are retained for a
minimum of 10 years.
Innovation
McLean Buchanan & Wilson has worked hard
over recent years to develop services that are
of true value to the end user. A number of
additional services are therefore available to
the civil engineering market that are designed
to make the selection and use of these
products easier:
• ‘In house’ technical support
• Site visits
• Instruction in bolt tightening techniques
• Training seminars on all forms of bolting
Supplier Alliances
As part of the ‘one stop shop’ service offering
and in addition to ‘in house’ industrial fastener
manufacture and fabrication, McLean Buchanan
& Wilson has established a number of key
strategic alliances with specialist civil
engineering fixings suppliers. This enables the
company to offer a more comprehensive
product range and allows these specialist fixings
and fastenings to be delivered at competitive
prices and on a single bill of materials with all
of the benefits that this offers.
Special Finishes
Full range of products in a number of
alternative finishes suited to their individual
and specific use. These include:
• Electroplated zinc coatings to BS7371 part 3
• Hot dip galvanized coatings to BS7371 part 6
• Sherardized coatings to BS7371 part 8
• Mechanically Galvanized coatings to
ASTM B695
Square Square Hex Holding Down Bolt
The square square round hex holding down bolt can be
supplied in a range of sizes from M12 to M100 and is the
more modern approach for anchoring. The system would
typically comprise of a holding down bolt, a square plate
washer and either a metal or a wax cardboard bolt box.
The partnership of the bolt and square hole washer
prevents the bolt’s rotation during fixing. The bolt boxes are
commonly used to create a void around the bolt which
enables any minor adjustments to be made after the
concrete has set.
These can be fabricated as a complete assembly with
multiple bolts if necessary. Fabricated assemblies can also
be supplied with hexagon bolts or studs.
Specialist Drop Bolt or Removable T-Head assemblies can
also be manufactured for use with heavy machinery or plant.
Washer Plates
Washer plates are supplied to anchor the holding down
bolts into concrete. These plates come in varying sizes and
types ranging from single hole standard to multi hole
‘specials’ in either flat plate or angle.
The following products are just a selection of the range of fastenersand fixings geared towards the civil engineering market that McLeanBuchanan & Wilson can offer. In reality, the company can source or
specially manufacture all requirements in a wide range of sizes, gradesand finish. The products section is just intended to provide a cross
section of what’s available but is in no way intended to be exhaustive. holding down bolts
other anchors
J Bolts/L Bolts
J Bolts and L Bolts can be manufactured and supplied for
use as holding down bolts. They can be connected to the
rebar cage as an alternative to the square square assembly.
Studs
Studs are most commonly used with injection resin
systems in masonry and concrete.
Fixings
McLean Buchanan & Wilson is a chosen distributor of the
industrial range of Fischer Fixing Systems. These include
chemical, mechanical interlock and undercut anchors.
Fischer currently leads the way in technical products
having gained more European technical approvals (eta)
than any other fixing manufacturer. Fischer provides a
range of first class technical services that include advice
on product selection, installation methods and offers
guidelines on the wide scope of product approvals and
building regulations.
Tie Rods can be manufactured in a vast range of sizes,
grades and finish for a multitude of applications.
Tie Rods are manufactured from the simple ‘anti-sag’
shuttering or ground stabilisation specifications to a
pre- stressing bar used in the tension zone so that the
concrete normally remains in compression under load
thus making the best use of material.
McLean Buchanan & Wilson offers a full range of end
fittings to cover all possible applications from a simple
bearing plate and nut to machined fork and pin
arrangements for architectural features. A range of couplers
can be supplied to complement the full range of bars.
tie rods
rail fastenings
Cooper and Turner manufacture a complete range of track
fasteners for the rail market. The quality and diversity of
this product makes them suitable for the world’s railways.
Bolts and nuts are produced to BS, UIC and other rail
standards. Diameters range from M12 (1/2") to M27 (11/8"),
with lengths to suit many different applications.
Fifty years of manufacturing expertise for the rail market
has enabled the company to build up unrivalled knowledge
and experience in the supplying of coach screws, track
bolts, holding down studs and a comprehensive range of
maintenance items that meet the exacting standards of
UK and global rail contracts.
A comprehensive range of rail fasteners is available
including:
• Chair Screws
• Through Bolts
• Stretcher Bar Bolts
• Fang Bolts
• Fishbolts
• ‘V’ Grade Switch and Crossing Bolts
C O N S T R U C T I O N I W I N D E N E R G Y I T U N N E L L I N G I R A I L I O E M
McLean Buchanan & Wilson Limited I 250 Helen Street I Glasgow G5I 3JG
Telephone +44 (0)I4I 445 3045 I Fax +44 (0))I4I 440 I225
Email [email protected] I Website www.mbw.co.uk
Within the broader range of civil engineering projects,
McLean Buchanan and Wilson supply a diverse range
of industrial fasteners to the rail, tunnelling, wind
energy and construction markets. Indeed, many of
these ‘off the shelf’ and bespoke parts can be seen on
some of the world’s largest and most ambitious civil
engineering projects.
Four key aspects make McLean Buchanan & Wilson
the natural choice for all of your civil engineering
requirements:
1. With more than 22,000 industrial fastener products
on the shelves at any one time, the company can
frequently pick from stock and deliver to site on
competitive timescales
2. The manufacturing resource of sister company,
Cooper and Turner, offers the flexibility of cost effective
and quality controlled manufacture of bespoke parts
3.A distributorship for Lindapter’s clamps, supports
and fixings complements the overall product offering
perfectly. For more information on this product range
log on to www.lindapter.com
4. Access to the full range of Fischer Fixings - For more
information and a design product CD log on to
www.fischer.co.uk
product portfolio