citylight

(MANUAL)

Version 1.0

for LOCAL

2 2

- Notice- All contents written in this manual was reviewed to the utmost in order not to make any error. Nevertheless, There could be necessary contents missed or wrong information in use.

Also, SamilCTS has a right to revise this manual without notice to managers, in case the contents need to be revised by the product's improvement of performance and addition of function.

Citylight Premium for Local Manual Manual, First Edition 1.0 2011 ~ 2012 SamilCTS

SamilCTS has the all rights of this manual. In case one wants to use a part of the contents or pictures, the one have to get a permission from SamilCTS, and this manual shouldn't be copied and distributed without SamilCTS's permission.

Record of Revision Date Version Description of Revision Writer 2013.04.04 1.0 First Edition Park Hyeong-cheol

SamilCTS 5445 3rd Woolim Lions Valley No. 805 Sangdaewon-dong Jungwon-gu Seongnam-si Gyeonggi-do Republic of Korea

Telephone : 070-7094-9000

Fax : 031-720-5165

Homepage : http://www.31cts.com

Chapter 1. Citylight 1. Definition of terms and abbreviation 2. Citylight product information 3. Citylight outline 4. Product components Chapter 2. Total Management Software (TMS) 1. Overall components 2. Station function 2.1. Players 2.1.1. Preference 2.1.1.1. General 2.1.1.2. Update 2.2. Log 3. Resource function 3.1. Resource List 3.1.1. Add playlist 3.1.2. Add from local 3.1.3. Add from web 4. Layout function 4.1. Add layout 4.2. Add divisions 4.3. Add resource 4.4. Example of adding layout and division

5 6 7 9

10

11 12 13 13 14 15 18 19

20 21 22 23 24

25 26 27 28 29

5. Schedule function 5.1. Add schedule 5.2. Add task 5.3. Properties function 5.4. Delete task 5.5. Delete schedule 5.6. Copy schedule 5.7. Paste schedule 6. Example of TMS-contents-register 6.1. Produce a group in Station 6.2.1. Register contents in resource 6.2.2. Preview the registered contents 6.3.1. Produce a layout 6.3.2. Produce a division 6.3.3. Register contents on division 6.4.1. Produce timeline in schedule 6.4.2. Register a task on timeline 6.4.3. Change and delete Task properties 6.5.1. Copy schedule to USB memory 8. FAQ Chapter 3. TMS Installation Guide 1. Install TMS 2. Remove TMS

32 33 34 36 37 38 39 40

41 42 43 44 45 46 47 48 49 50 51

52

54 55 65

Chapter 1

CityLight

1. Definition of terms and abbreviation

2. Citylights product information

3. Citylights outline

4. Product components

6

Definition of terms and abbreviation 1 DID : Digital Information Display

Grouping : Arranging the data having features in common, or groups related to classification.

Contents : It refers to the various types of resource, picture, image, flash, HTML, etc.

Layouts : The function of composing only one screen for the use of the limited display.

Divisions : Arranging multiple divisions on the top of layout and virtually indicated

to the player device.

Schedule : Scheduled Video Playback Management to drive random date or contents

in certain situation.

Task : Its a minimum unit of scheduled video playback or scheduling. It makes schedule by adding a task.

RTC(Real Time Clock) : Its shutting off the power supply at a certain time and doing authentication function

Anti Burn-In : The function of preventing from the damages of the panel in case it could be damaged by long time exposure during long playback.

6 C I T Y L I G H T

C O M P O N E N T

7

Citylights product information 2

7

Total Management System

O.S Windows 7 Professional Service Pack 1

Codec K-Lite Codec Pack

Etc. Flash Player Ax/Plugin PowerPoint Viewer 2007 Visual C++ Redistributable package 2010 (x86)

Software Requirements Specification

Player device (Windows version)

O.S Windows 7 Professional Service Pack 1

Codec K-Lite Codec Pack

Etc. Flash Player Ax/Plugin PowerPoint Viewer 2007 Visual C++ Redistributable package 2010 (x86)

Player device(Android Version)

O.S Android 4.1.1 Jelly Bean Codec MPEG4, H.264

Etc. Adobe Flash Player 11

C I T Y L I G H T

C O M P O N E N T

8

Citylights product information 2

8

For TMS/ For Player device (Windows Version)

CPU Over Dual Core 2.1GHz

Memory Over 2GB

HDD Extra space of over 50GB

USB 2 USB Port

Speaker 10W X 2

Hardware Requirements Specification

For Player device(Android Version)

CPU 1.7GHz Quad core ARM Cortex-A9

Memory Over 2GB

Storage Extra space of over 4GB

USB 2 USB Port

C I T Y L I G H T

C O M P O N E N T

Total Management Software

Guide

Chapter 2

1. Overall components

2. Station function

3. Resource function

4. Layout function

5. Schedule function

6. Example of TMS-contents-register

7. FAQ

Overall Components 1 The overall category function about TMS system is like followings.

Station[Station Information]: Consist of creating USB memory and Preferences and Log file system to search by date.

Resource[Resource List]: Possible to make a playlist and check if the added contents play or not in real time, by synchronizing the main server with the data.

Layout[Layout Divisions]: Able to register contents to play with each of divisions by adding one layout and dividing into various divisions. With this contents information, running on the device is able to be checked through the preview.

Schedule[Schedule TimeLine]: By using the registered resource and layout, its possible to create playback schedule by date.

12

Picture 2.1. Total Management System (TMS)s initial screen

C I T Y L I G H T

T M S I G U I D E

Station Function The name and function of station information are as follows.

2.1. Players [ ] : As a function of adding or removing a group that manage the

player device, it is able to manage all at the same time by grouping a number of the player device registered on the right information screen into one.

- When a name of a group is added, its not allowed to type any special letters in aside from ., _, / .

Preference[ ] : The group preference, which is selected on the group list, is copied with USB copy.

Make USB [ ] : Copy the selected schedule file into USB.

2

13

Picture 2.2. Group List screen

13 C I T Y L I G H T

T M S I G U I D E

Station Function 2.1.1. Preference[ ]

The preference about the player device included in the group is able to be changed, which preference is able to set a group unit registered on the group list.

2

14

Picture 2.3. General Screen

The function of managing and changing the preference of the grouped player device.

C I T Y L I G H T

T M S I G U I D E

Station function 2

Indicate basic information about TMS

Product: Indicate the registered product name.

Version: Indicate the version of the current TMS.

Mac Address: Indicate the physical address of the accessed TMS

Name : Indicate the TMS name that a user typed in

2.1.1.1. General

15

Picture 2.4. System Information screen

15

Using Auto Start: Set whether Player is automatically executed or not while booting. (*not allowed to revise)

Default playback duration(min:10s)

- Limit a minimum of 10s.

ex) If the duration of the content property in the Resource category is set to the default value(00:00:10), the next content is played after 10s by the duration above Default playback duration as above.

C I T Y L I G H T

Picture 2.5 Player Option screen

T M S I G U I D E

The default value 00:00:00

Station Function 2 2.1.1.1. General

Player is possible to automatically turn on & off at the specific time you choose by day of the week.

But, in case the on& off time is set up at the same time, it doesnt work.

It is applied to the server if the Apply button is clicked after setting up the feature.

Power Control doesnt work in Android Player

16

Picture2.6. Power Control screen

C I T Y L I G H T

T M S I G U I D E

Station Function 2

Its the explanation of playback mode about Daily schedule on the left Schedule category.

Continuous

- If the playback schedule of the current time exists by loading the days schedule file, it plays the applicable schedule. But if it doesnt exist, it play the next playback schedule of the current time by searching.

- If the playback schedule of the current time doesnt exists, play the previous playback schedule of the current time by searching.

On schedule

- If the playback schedule of the current time exists in the days schedule file, it plays the playback schedule, but if it doesnt exist, the system is waiting with Stand-By mode up to the next schedule time coming.

17

Picture 2.8. Daily schedule screen

17

2.1.1.1. General The explanation of the mode function about Daily schedule on the right

Schedule category.

C I T Y L I G H T

Picture 2.7. Scheduling Mode Screen

T M S I G U I D E

Station Function 2.1.2. Update[ ]

It is the function to copy the applicable files to USB memory so that the set schedule is updated to Player, .

2

18

2.9. General screen

Select Players O/S to update.

Select the group in which a schedule is set. Do not select the applicable group name of Player but select the group that has a schedule to copy.

When inserting USB memory, the applicable drive is selected in Target USB drive. If it doesnt show up, click the Rescan button.

[ ] : Copy the contents and applicable files to update into USB memory. When completed, the eye_view folder is created.

[ ] : Create files into USB memory so that Players schedule could be initialized.

[ ] : Close the Update window.

C I T Y L I G H T

T M S I G U I D E

eye_view

Station Function 2.2. Log Through the log information of TMS system, the status information of its system can

be checked at once. Also, through this, it plays an important role that analyzes and solves any problems.

2

The types of the Code item are classified into information, warning and error.

Information : Indicate general information about the operation of the system.

Warning : Indicate the warning log about the unusual behavior out of the various behavior of the software.

Error: Indicate the error log in case there happen problems which make the software not normally work.

There are buttons today / 3days / 1week / 2weeks / 1month / 2months / 3months about Log view. When each of the buttons is clicked, its date is indicated on the item From / To, and at the same time the log information is indicated as long as its period.

Able to search for the date that you want by inputting From / To.

Picture 2.10. Log screen


T M S I G U I D E

The name and function about Resource are like follows. As a function of adding and removing resource (contents) to the main server, through

the preview function the playback status of the added contents in the main server can be checked in real time.

Supported file formats

*.avi *.mkv *.mpeg *.mpg *.wmv *.mp4 *.mov *.3gp *.bmp *.gif

*.jpg *.jpeg *.png *.mp3 *.wma *.wav *.swf *.ppt *.pptx *.htm *.html

* the supported file formats are different depending on the type of Players O/S. (reference page 9)

The main types of contents

Widget: Basically provides news, weather, stock information and etc from Citylight.

Video: Video file

Image: Image file

Flash: File produced into the flash type by Adobe

PPT: Document made with PowerPoint

web: File produced in the type of HTML and the website address input in TMS

Resource Function 3

Picture 2.11. Initial Resource screen


T M S I G U I D E

Resource Function 3 3.1. Resource List

By clicking the [ ] icon, Add playlist, From local, From Web can be used.

Add playlist : Its a type of list, which plays back with circulating the applicable contents on screen by creating one playlist and then grouping various contents.

From local : Add contents which is saved in a Local PC.

From web : Add site-contents by inputting Website address(URL)

When selecting contents of the left Resources List screen, the contents possible to play back is indicate in the middle Preview screen, and the contents properties information is indicated in the right Properties screen.

The duration function, which is indicated in the right Properties screen of the contents, isnt able to be designated in case of audio files. It plays back for the playback duration with video, and repeating is the planning intention.

If the applicable contents isnt normally played back and indicated in the middle Preview screen, convert the contents and re-register them since it is not the supported contents format.

Picture 2.12. Resource List screen


T M S I G U I D E

Resource Function 3 3.1.1. Add playlist

By clicking [ ] icon, its possible to input the name of the playlist on the Add new playlist pop up - ex) CTS

After inputting the name of the playlist, by clicking Insert button the playlist is produced as the picture below. - When adding the name of the playlist, its not allowed to input the other special letters aside from ., _, -.

Its possible to arrange the order of resources by item like Name, Type, Duration, etc on Resources List screen.

How to add contents on the playlist

- Drag and Drop the added contents on the produced playlist.

- If contents exist on the below part of the playlist like above, the [ ] icon is indicated. - Through the playlist the various different kinds of contents can be managed and played back.

Picture 2.13. Playlist-add screen

Picture 2.14. Playlist-added screen


T M S I G U I D E

3.1.2. Add from local

Resource Function 3

By clicking the [ ] icon, select From local.

After selecting From local, when selecting the existing contents on the local PC, they are automatically added.

Aside from ., _ and -, the other special letters can be added on the name of the contents or resources.

Its possible to add a variety of the contents such as video, subtitle, image, flash, PPT, HTML, etc on the Resource list.

Picture 2.15. Contents-register screen

Picture 2.16. Resource-added screen


T M S I G U I D E

Resource Function 3

By clicking the [ ] icon, select

After selecting From web, by inputting the website address (URL) that you like, it can be added on the Resource list.

- When adding URL, apart from ., _, - the other special letters cant be input.

The content above is the result screen checked in real time by adding website.

3.1.3. Add From web

Picture 2.17. Add URL on the web screen

Picture2.18. Resource-added screen


T M S I G U I D E

Layout Function 4 The name and function of Layout Divisions are like follows. By producing one layout, multiple divisions-scope can be produced on the top.

The scope of the applicable divisions is the scope of the contents in which the playback information is indicated on the actual Player device.

When selecting the left layout or divisions, the property information is differently indicated on the right Properties, depending on the status.

After the information of the right Properties is revised, it should be updated in order to be applied to the main server.

The tabs of Layout Divisions and Resources List are separated on the below on the right side, and it can be registered to the Divisions scope through the contents indicated to each of the tabs.

Picture 2.19. Initial Layout screen

25

Its possible to arrange the order of layouts by item like Name, VID, X, Y, etc on the Layout Divisions Screen on the left side.

C I T Y L I G H T

T M S I G U I D E

Layout Function 4 4.1. Add layout

Add Layout

- By clicking the [ ] icon on the top, one lay out is added.

- The basic name of a layout newly produced is Layout.

- The basic resolution of the layout is automatically 1920 X 1080.

Revise Layout-scope

- Its possible to revise the name, width and height of the right Properties-screen.

- When revising a name, apart from ., _, - inputting the other special letters is not allowed.

- After revising the item, the button update should be clicked in order to be applied to the main server.

Layout Zoom In/Out function

- Its possible to use zoom in/out (25%, 50%, 75%, 100%) by the function Zoom located on the top of the middle screen(Layout Designer).

Picture 2.20. Layout-add screen


T M S I G U I D E

Layout Function 4 4.2. Add Divisions Divisions are the organized screen where contents-playback information is

substantially indicated.

27

Picture 2.21. Divisions-add screen

27

Divisions-add

- By dragging on the top of the added a layout scope, one divisions scope is automatically produced.

- The basic name of Divisions newly produced is Divisions.

- After selecting the name of the Division already produced, its possible to revise the measurements of Name, X-coordinate, Y-coordinate, width and height on the right Properties screen.

- After inputting the item, the button update has to be clicked in order to be applied to the main server.

Multiple Division Play is not allowed in Android Player.

C I T Y L I G H T

T M S I G U I D E

Layout Function 4 4.3. Add Resource

Add Resources on the top of Divisions

- After selecting the Resources List tab on the below part of the left and then selecting the contents already registered, drag and drop on the scope of Divisions.

- When the contents are normally added, the name of the Resource is indicated on the top of Division.

Picture 2.22. Resources-add screen


T M S I G U I D E

4.4. Example of adding Layout and Division The following example is that two of Divisions are arranged on one layout.

1) Add Layout

By clicking the [ ] icon on the top of the left side, one layout is produced.

After selecting the name of the layout produced and then changing the name on the Properties, click the button update.

- Its possible to revise the name, width, height about the layout on the right Properties.

By naming the produced layout, the gray colored layout is indicated on the middle of layout Designer.

Layout Function 4

Picture 2.23. Added Layouts screen


T M S I G U I D E

2) Divisions-add

After clicking on the gray layout in the middle Layout Designer screen, by dragging as much as you want, divisions are created.

Whenever dragging, each of Divisions is created.

After selecting the name of the Division and then inputting the name, width, height, X, Y on the right Properties, click the button update.

But when revising the name, apart from ., _, - the other special letters cant be input.

By calculating the measurement of the produced Divisions, be careful not to make a gap between each Divisions.

Layout Function 4 Picture 2.24. Divisions-revise screen


T M S I G U I D E

3) Resources-register

Select the Resources list tab at the bottom of the left.

After selecting the Resource registered on the left of the screen, drag and drop it on the scope of the produced Divisions.

Like the picture above, the Resource-name is indicated on the scope of the Divisions.

Layout Function 4 Picture 2.25. Resources-add screen


T M S I G U I D E

Schedule Function 5 The name and function of Schedule are as follows. It is set up, based on the group-name of the Station-category registered.

- Refer to Picture 2.2 Group list screen of the item 2.1 Players.

Through the calendar of the right, by producing a schedule table on a certain day and then adding a layout or resource task to the schedule table, the scheduling can be set up by a certain time zone.

This schedule is related to the item Scheduling mode that was previously set up from the preference.

- Refer to Picture 2.7. Scheduling mode screen of the item 2.1.1.1 General

It is separated to Layout Divisions tab and Resources tab at the bottom of the left, and you can add a schedule using Layout and Resource indicated on each tab.

A schedule can be produced on one schedule table with Layout and Resources.

You can directly revise and select each of the items such as Name, Start time/End time, Using BGM, Using fit screen and Touch delay of the properties at the bottom of the right.

Picture 2.26. Initial Schedule screen


T M S I G U I D E

Schedule Function 5 5.1. Add Schedule table In case resources and layouts were revised beforehand, you should create

a new schedule.

How to add a Schedule table

1) Select the group-name of the schedule that you want to add on the item Group name on the right.

- In terms of the information of Group, prefer to the item 2.1. Players

2) After selecting the date you want to add, select the Add new schedule item by clicking the right button of mouse.

- A empty scheduling table is automatically produced at the Schedule Time Line on the left.

- The task (playback schedule) of the produced scheduling table is set by the unit of 15min.

Picture 2.27. Schedule-add screen


T M S I G U I D E

5.2. Task-add How to register a task to a empty schedule table of the produced Schedule Time Line

is that there are largely two ways of Layout task and Resources task.

Schedule Function 5

How to register Layout-task

1) Click the Layout Divisions tab at the bottom of the left side of the Schedule category.

2) If you drag and drop the layout where Resource is added to Divisions on the Layout Divisions screen, a task is added. - Refer to Picture 2.22. Resources-add screen of the 4.3 Resource-register item.

3) Refer to the 5.3. Properties Function item in order to revise the property of the added task.4) If it is normally registered, the colors indicated as the Schedule table above.

34

Picture 2.28. Layout-task register screen


T M S I G U I D E

Schedule Function 5

How to register Resources task

1) Click the Resources List tab at the bottom of the left of the Schedule category.

2) If you drag and drop the added Resource previously on the Resources List screen to the Schedule, a task is added.

- Prefer to the 3.1. Resource List item.

3) Prefer to the5.3. Properties Function in order to revise the property of the added task.

4) If it is normally registered, the color is indicated as the Schedule table above.

35

Picture 2.29. Resources-task-register screen


T M S I G U I D E

5.3. Properties Function Its about the function of Properties of the right side about Task.

Schedule Function 5

If you select the task added to the Schedule table, the properties-information is indicated as the picture above.

Name : Its able to revise and change the name about the task of the applicable schedule.

It doesn't sync with the Layout or Resource category, and as a name of the Task, it is independently used.

- But, when revising a name of the Task, apart from ., _, - the other special letters are not allowed to be input.

Start time / End time : You can directly input the exact start time and end time about the applicable task.

Using BGM : When the contents have music, the music is automatically played back.

It's possible only when the Player device supports a music system.

Using fit screen : The size of the contents is automatically adjusted to full size, ignoring the original size of the registered Resource.

Touch delay: When playing back a dramatic content with touching a screen, the playback is delayed as much as the designated Touch Delay hour.

Its possible only when the Player device has the touch-panel function.

36

Picture 2.30. Properties option screen


T M S I G U I D E

5.4. Task-delete

Schedule Function 5

By clicking the right button of the mouse on the added Schedule table, the added task can be deleted with Delete task.

The deleted task cant be recovered again.

Picture 2.32 Deleted - task screen

Picture 2.31. Task-delete screen


T M S I G U I D E

5.5. Schedule-delete

Schedule Function 5

By clicking the right button of the mouse at the date of the addedSchedule, the added schedule can be deleted with Delete schedule.

The deleted Schedule cant be recovered again.

Picture 2.33. Schedule-delete screen

Picture 2.34 Deleted schedule screen


T M S I G U I D E

5.6. Schedule Function

Schedule Function 5

By clicking the right button at the date of the added Schedule, the applicable Schedule can be copied with Copy

Since the copied Schedule is stored in clipboard, anytime you can use it by pasting it.

Picture 2.35. schedule-copy screen


T M S I G U I D E

5.7. Schedule-paste

Schedule Function 5

Select a group and date to add.

As the picture above, after clicking the right button of the mouse on the applicable date you can paste the copied schedule that is stored in clipboard.

Picture 2.36. Schedule-paste screen

Picture 2.37 Complete schedule-paste screen

40

As the picture above, the schedule is copied on the applicable group and date.

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 Using TMS, how to play back contents in the Player device is as

follows.

After clicking TMS, input the account and password and then log on.

In Station, produce a group of the contents to play back in the "Player" device.

In Resource, register the contents to execute in the Player device.

In Layout, with the contents registered in Resource set up the screen layout in the Player device by the way that you like.

In "Schedule", set up the schedule using that layout and resource.

In Station, Finally change the content and register it in the Player device by updating the group.


T M S I G U I D E

Example of TMS-contents-register 6 6.1. Produce a group in Station By clicking the [ ] icon, make a new group.

1) By clicking the [ ] icon, make a new group.

2) After inputting a name in Group name of the Add new group window, click the Insertbutton.

- Make sure that the new group was produced in Group list.

3) Prefer to the 2.1 Players item.


42

1. Click

2. Input a name

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.2.1. In Resource, contents-register By clicking the [ ] icon, register contents.

1) Click the [ ] icon.

2) By clicking From local, register the contents in My computer.

- in the Resource Properties window its possible to check the property of the contents and set up the duration of the contents playback.

- But, audio file is not allowed to designate duration.

3) Refer to the 3.1 Resource List item.


43

1. Click

2. Click From local

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.2.2. Registered-contents-preview By clicking the [ ] icon, check the registered contents.

1) Select one content of the registered contents.

2) Click the [ ] icon.

3) Check whether it is executed well in the preview screen.

- Unless the content works in the preview screen, it doesnt work in the actual Player device.

4) Refer to the 3. Resource Function item.


44

2. Click

1. Select contents

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.3.1. Layout-produce

Create a layout to be shown in Player, and set a layout by dividing a screen on the layout.

1) Check whether the Layout Divisions is selected in the tab at the bottom.

2) By clicking the [ ] icon, produce Layout.

3) Click the produced Layout.

4) The 1920 X 1080 layout is indicated in Layout Designer, as a gray box.


45

2. Click

3. Select Layout

4 Layout

1. Select Layout Divisions tab

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.3.2. Division-produce Arrange and divide the screen of the contents shown in one Player in

various way.

1) By clicking the Layout(gray box) in Layout Designer, one division is produced..

- Division list is automatically produced under the Layout.

2) Select the location by the value of X,Y from the standard of the border-top-left of Division, and revise the value of width and height, and then click the Update button.

3) In case you want to delete Division, after clicking the Division of the list, click the [ ] icon.

4) Refer to 4.1. Layout-add, 4.2. Divisions-add


46

1. Click Layout

2. Adjust the property of the Divisions

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.3.3. Contents-register to Division Register contents to each of Division that has been divided and arranged.

1) Check that Layout Divisions is selected in the tab of the bottom.

- The list of the registered contents is shown.

2) Select the content, and then by dragging and dropping it on the location of the Division that you want, register it.

- When the content is registered in Division, the name of the content is automatically indicated in Division.

3) Refer to 4.3. Resource-register.


47

1. Selct Resources List tab

2. Drag & Drop

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.4.1. Timeline-produce in Schedule Produce Timeline by selecting the group and date..

1) Select the group that you want to register in the list of group name.

2) After selecting the date that you want to execute in the calendar, click the right button of the mouse.

3) Select Add new schedule.

- Timeline is produced in Schedule Timeline.

4) Prefer to 5. Schedule Function


48

1. Select a group 2. Select a date

3. After clicking the right button of the mouse : Select Add new schedule

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.4.2. Take-register in Timeline By producing a task in Timeline with Layout, Division, Resources, make Schedule.

1) Check the Layout Division tab or Resource List tab at the bottom, which you want to register.

- Layout Divisions: When you want to register Layout or Division.

- Resource List : When you want to register the content without setting Layout.

2) After selecting Layout, Division, Resource that you want to register, by dragging and dropping it in Timeline, register the task


49

1. Select Layout Divisions or Resources List tab

2. Drag & Drop

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.4.3. Change and delete Task-Properties By selecting the task registered in Timeline and adjusting the properties,

produce Schedule.

1) Select the task that you want to change the properties of.

- The selected task is indicated in red.

2) After changing the properties of the task in Schedule Properties, click the Update button.

- Name : Change a name of a task

-Star time/ End Time : Set the time of Start time/End time of a task.

-Using BGM : In case of including music in a content, check the use of BGM.

-Touch delay : Set the time that when a dynamic content is played back in the touch panel, and a user touch the screen, the content is temporarily paused.

3) How to delete a task is that after selecting the applicable task and clicking the right button of the mouse, click Delete Task.


50

2. Adjust the time-properties

1. SelectTask

3. Delete Task

C I T Y L I G H T

T M S I G U I D E

Example of TMS-contents-register 6 6.5.1. Copy Schedule to USB memory Make a file on USB so that you can update it in Player.

1) Execute the Update window by clicking the Make USB button.

2) Select the Players O/S to update since a copied file format is different depending on O/S.

3) Select the group that is selected in the 6.4.1. Timeline-produce in Schedule item.

4) Select the drive-name of USB memory. In case it doesnt come out, click the Rescan button.

5) If you click the Make it button, the content and schedule file of the selected group are copied on USB.

6) By the Clear USB button, you can initialize the schedule of the Player. The schedule is initialized when connecting the USB made by Clear USB to Player.

Picture 2.47. Making- on USB screen

51

1. Select Make USB

2. Select Player O/S

3. Select a group

4. Select USB drive

5. Select Make it

C I T Y L I G H T

T M S I G U I D E

FAQs regarding TMS are as follows.

1. Q : After registering a content in the resource category, the message unable to find the content comes out.

A: There is great potential to have included special letters (ex: {},[],(),&, etc) that are unrecognized as a file-name of the uploaded contents. First, delete the registered content in the list. After revising the file-name not including special letters using Windows Explorer, register it again.

2. Q: There is a playback - problem that the contents dont play back well, which played back well before.

A: When rendering contents in Windows O/S, it uses K-Lite integrated codec. The problem can come out by the codec-collision, in case the other integrated codec is installed or the codec that is provided from other media players is installed in the TMS set-up condition.

First, after uninstalling the additionally installed codec, execute TMS again. If it doesnt work, uninstall TMS and install TMS again.

A: In case a Flash file plays back in Android O/S, by removing memory the problem could happen.

Memory couldnt be removed in case the playback duration of the flash file is too short. Turn off and on the product power.

3. Q: The recent revised layout is not applied to the previously made schedule.

A: A schedule file has content or layout information which was registered at the beginning. Its because it works with a schedule file without referring to a content or layout registered in DB.

However, even though a content or layout is revised after creating a schedule, the previously created schedule is not automatically reflected.

Create a new schedule in order to reflect a newly revised layout or content into the schedule.

FAQ 7

52

C I T Y L I G H T

T M S I G U I D E

4. Q: Although Player is updated, it doesnt play.

A : There are two products of the player for Windows and Android. Playback-problems can occur in case Android Player is updated with USB created for Windows.

A: Check the select of the group in the process of Make USB.

The group-name used in Make USB shall be the same as the group-name created in the Schedule menu.

5. Q: Even though USB memory is inserted into Player, it isn't updated.

A: Player, which is once updated by USB memory, is not updated since the USB memory has information about the update information of the Player.

Therefore, using TMS, re-create the USB memory, or by connecting a removable disk to PC, delete the done folder in the eye_view folder. And then insert the USB memory to Player.

FAQ 7

53

C I T Y L I G H T

T M S I G U I D E

TMS Install Guide

Chapter 3

1. TMS-Install

2. TMS-Delete

1.1. TMS-install By double-clicking, run the clp-studio-local-setup.exe file of the files

provided from the manufacturer(SamilCTS).

You should install K-Lite Codec Pack, Flash Player, vcredist_2010_x86, MS Office PowerPoint Viewer 2007, Office system compatibility pack, etc beforehand in order to smoothly run the TMS product.

55

TMS-Install 1

Click the next button in the initial install screen.

After selecting the I agree with all the above. in License agreement screen, click the install button.

55

Picture 3.1. The initial install screen

Picture 3.2. License agreement screen

C I T Y L I G H T

T M S I G U I D E

TMS Install 1

After selecting I agree in Package installer screen, click the install button.

But, you dont need to install it again in the installed status. Click the Cancel button.

When Package installer is normally completed, its indicated as above.

Click the Finish button.

56 56

Picture 3.3. Package installer screen

Picture 3.4. Complete package installer screen

C I T Y L I G H T

T M S I G U I D E

TMS Install 1

K-Lite Codec Pack is needed to smoothly play back video contents.

Proceed with the install by clicking the Next button in the install screen.

But, you dont need to install it again in the installed status. Click the Cancel button.

After selecting the Simple install(hide most options) item as above, click the Next button.

57 57

Picture 3.5. K-Lite Codec Pack install screen


C I T Y L I G H T

T M S I G U I D E

TMS Install 1

After selecting the Enable internal decoder for H.264 video item as above, click the Next button.

After selecting the Media Player Classic item as above, click the Next button.

58 58



C I T Y L I G H T

T M S I G U I D E

TMS Install 1

After selecting the Select all video, Select all audio item as above, click the Next button.

After selecting the Select all item as above, click the Next button.

59 59



C I T Y L I G H T

T M S I G U I D E

TMS Install 1

After checking the items as above, click the Next button.

Click the Install button as above.

60 60



C I T Y L I G H T

T M S I G U I D E

TMS Install 1

When K-Lite Codec Pack install is completed, it is indicated as above.

By clicking the Finish button as above, finish the install.

After selecting I agree with the terms and conditions of the Microsoft Software License Agreement., click the Next button.

61 61


Picture 3.14. Office PowerPoint Viewer 2007 install screen

C I T Y L I G H T

T M S I G U I D E

TMS Install 1

After selecting I agree with the terms and conditions of the Microsoft Software License Agreement., click the Next button.

Adobe Flash Player is needed to smoothly play back Flash contents.

After selecting the License Agreement as above, click the Install button.

62 62

Picture 3.15. Office system compatibility pack screen

Picture 3.16. Adobe Flash Player Installer screen

C I T Y L I G H T

T M S I G U I D E

TMS Install 1

63

Picture 3.18. Citylight Firewall add screen

Picture 3.19. Complete Total Management Software install screen

You should add Citylight system to Firewall of the local PC in order to smoothly run the system.

By clicking the OK button, finish the install.

If Total Management Software install is completed, after selecting Your computer will reboot now, click the Finish button.

C I T Y L I G H T

T M S I G U I D E

TMS Install 1

If it is normally completed, the Citylight Studio icon is indicated in All programs.

The Studio icon is indicated in the desktop as well.

All files are installed in C:\eye_view.

64

Picture 3.20. Citylight icon

[ Start menu screen ] [ Desktop screen]

C I T Y L I G H T

T M S I G U I D E

65

TMS Uninstall 2

By clicking Citylight Uninstall in start-menu, you can uninstall the installed TMS.

- If uninstalled, the C:\eye_view directory is deleted. Unless normally uninstalled, the directory still exists.

- But, the directory of the default account couldnt be deleted.

2. TMS Uninstall

65

Picture 3.21. Uninstall screen

[ Start Menu screen ] [ Complete uninstall screen ]

C I T Y L I G H T

T M S I G U I D E

1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

citylight

Documents

schedule function

resource function

layout function

local manual manual

necessary contents

registered contents

samilcts samilcts

station function