citrix 1y0-a18 ak - gratis exam number ... which port is used for communication between the citrix...

Citrix_1Y0-A18_AK

Number: 1Y0-A18Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

Citrix 1Y0-A18 Exam

Sections1. A2. B3. C4. D5. E6. F7. G8. H9. I

Exam A

QUESTION 1A zone data collector ___________ . (Choose the correct option to complete the sentence.)

A. handles ICA traffic for the zoneB. writes information to the data storeC. is responsible for maintaining server load evaluator informationD. makes sure all XML traffic is routed between the servers in the zone

Correct Answer: CSection: AExplanation

Explanation/Reference:Explanation:

QUESTION 2Scenario: A company's XenApp farm is spread across four geographically separated datacenters. Eachdatacenter is its own zone in the farm. Datacenter A contains 50 servers. Datacenter B contains 100 servers.Datacenter C contains 20 servers, and Datacenter D contains 10 servers, one of which is the license server.

Which datacenter would be the appropriate location for the farm's data store?

A. Datacenter AB. Datacenter BC. Datacenter CD. Datacenter D

Correct Answer: BSection: AExplanation


QUESTION 3Which port is used by the Citrix License Administration Console?

A. 2598B. 7279C. 8082D. 27000



"Pass Any Exam. Any Time." - 100% Pass Guarantee 2Citrix 1Y0-A18 Exam

QUESTION 4Scenario: A user successfully launched a published application delivered from a XenApp server running within

the user's LAN. Session Reliability has been disabled.

Which port is used for communication between the Citrix online plug-in and the XenApp server?

A. 80B. 1494C. 2598D. 3389


Explanation/Reference:Explanation:The port used for ICA traffic when session reliability is disabled is 1494, it is only 2598 when session reliability isENABLED.

QUESTION 5Scenario: A user successfully launched a published application through an Access Gateway. The application isdelivered from a XenApp server running in the datacenter and Session Reliability has been enabled.

Which port is used for communication between the Access Gateway and the XenApp server?

A. 80B. 443C. 1494D. 2598

Correct Answer: BSection: AExplanation

Explanation/Reference:Explanation:Since Session Reliability is enabled the correct answer is 2598 rather than 1494.

If you are using the Access Gateway with Citrix XenApp, open TCP port 1494. If session reliability is enabled,open TCP port 2598 instead of 1494.


QUESTION 6Which statement best describes the purpose of the data collector?

A. It verifies a user's permissions for the requested application.B. It is used by the Delivery Services Console to run the farm discovery.C. It authenticates the user and populates the Web Interface with their icons.D. It maintains and communicates farm information to data collectors in other zones

Correct Answer: DSection: AExplanation

Explanation/Reference:

Explanation:


QUESTION 7Scenario: A XenApp farm is located in a datacenter in New York. A request has been made to add a XenAppserver in London. The WAN network connection is stable enough to allow the new server to exist in the NewYork farm.

What should be done by the administrator to ensure that the least amount of Citrix IMA traffic traverses theWAN?

A. The administrator needs to create a new zone and add the new server to that zone, making it the zone datacollector.

B. The administrator does not need to create a new zone because Citrix IMA traffic will only originate from thedata collector.

C. The administrator does not need to create a new zone if "Not Preferred" is specified as the electionpreference for the new server.

D. The administrator does not need to create a zone for the new server, but rather create a new farm and linkCitrix IMA traffic in the Delivery Center.

Correct Answer: ASection: AExplanation


QUESTION 8"Pass Any Exam. Any Time." - 100% Pass Guarantee 4Citrix 1Y0-A18 ExamWhich three options can an administrator use to add members to the Remote Desktop Users group during aXenApp installation? (Choose three.)

A. Power UsersB. Domain UsersC. AdministratorsD. Anonymous UsersE. Authenticated UsersF. List of users from the Users Group

Correct Answer: DEFSection: AExplanation


QUESTION 9Which method can be used when changing the farm membership of a server?

A. Run the QFARM command.B. Run the CHFARM command.C. Use XenApp Server Role Manager.D. Use the Delivery Services Console.



QUESTION 10Which statement correctly describes behavior of the XenApp Server Role Manager?

A. Remote Desktop Services will be automatically installed. Within the XenApp Server role the online plug-in isautomatically installed.

B. Remote Desktop Services will need to be installed separately. Within the XenApp Server role the onlineplug-in is automatically installed.

C. Remote Desktop Services will be automatically installed. Within the XenApp Server role both the online andoffline plug-in are automatically installed.

D. Remote Desktop Services will need to be installed separately. Within the XenApp Server role both theonline and offline plug-in are automatically installed.


Explanation/Reference:Explanation:The XenApp Server Role Manager deploys the following software (except as noted), if it is not


already installed:

NET Framework 3.5 SP1 (this is a prerequisite for the XenApp Server Role Manager; it is deployedautomatically when you choose to add the XenApp server role from the Autorun menu) Windows ServerRemote Desktop Services role (if you do not have this prerequisite installed, the Server Role Manager installs itand enables the RDP client connection option; you will be asked to restart the server and resume theinstallation when you log on again) Windows Application Server roleMicrosoft Visual C++ 2005 SP1 Redistributable (x64)Microsoft Visual C++ 2008 SP1 Redistributable (x64)

QUESTION 11Scenario: The main application used in an organization is the CRM application, which is published in a separateapplication folder called CRM. An administrator must configure delegated administration rights for the helpdesk. The help desk's administrative rights will need to be limitedto:

-View all areas of the Delivery Services Console.

-Perform session tasks related to their job, such as resetting sessions across the farm.

Which approach would give the required result for the help desk group?

A. Configure View Only permissions for the Delivery Services Console and configure Full administrationpermissions for the sessions node.

B. Configure View Only permissions for the Delivery Services Console and configure Full administrationpermissions for the CRM application folder.

C. Configure View Only permissions for the following nodes: Administrators, Farm Management, Printers andPrinter Drivers, Applications and Server Information. Configure Full administration permissions for"Sessions" under the servers node.

D. Configure View Only permissions for the following nodes: Administrators, Farm Management, Printers andPrinter Drivers, Applications and Server Information. Configure Full administration permissions for"Sessions" under the CRM folder in the application node.




QUESTION 12Which lightweight plug-in is installed with minimal user interaction?

A. MAC plug-inB. Online plug-inC. Online plug-in - WebD. Secure Access plug-in



QUESTION 13Scenario: Users access their XenApp applications through a Web Interface. Each XenApp server has all therequired applications installed. The administrator discovers that users are being connected to several differentXenApp servers while using their applications, causing profile corruption.

How should the administrator resolve this issue?

A. Utilize the session sharing feature by standardizing all published application settings.B. Utilize the Session Reliability feature by upgrading all online plug-ins to the latest version.C. Utilize the session sharing feature by standardizing only the screen resolution on all published applications.D. Utilize the Session Reliability feature by opening port 2598 between the XenApp servers and the Web

Interface server.



QUESTION 14Which two methods can an administrator use to deliver the plug-in to multiple users at the same time? (Choosetwo.)

A. Microsoft transform fileB. Command line interfaceC. Merchandising Server rulesD. Active Directory Group Policy


Correct Answer: CDSection: AExplanation


QUESTION 15An administrator has configured an HDX MediaStream for Flash (client-side) policy and set the Flash latencythreshold to 75 milliseconds.

What will the result be if the latency between the server and client device is greater than 75 milliseconds?

A. Flash content quality is improved.B. Flash content quality is degraded.C. Flash content is rendered on the client.D. Flash content is rendered on the server.



QUESTION 16Scenario: Users want the best performance when displaying images in their sessions. The administratordecides to configure HDX 3D Image Acceleration to remove redundant data from the images and improve theimage transfer speed. The administrator wants to set this feature to remove the maximum amount of redundantdata so it uses the minimum bandwidth requirements.

Which lossy compression level setting must the administrator select to meet these requirements?

A. NoneB. LowC. MediumD. High



QUESTION 17Scenario: An administrator has published RealOne Player in the farm so users can view

"Pass Any Exam. Any Time." - 100% Pass Guarantee 8Citrix 1Y0-A18 Exammultimedia files from within their sessions and play them on their client devices. HDX MediaStream MultimediaAcceleration is enabled in the farm. Users are complaining that the multimedia files are NOT playing correctly.

What must the administrator do to ensure that multimedia files play in user sessions?

A. Disable audio on the server.B. Enable HDX MediaStream for Flash.C. Increase the buffer size on the server.D. Install video and audio codecs on the client device



QUESTION 18Where is SmoothRoaming configured?

A. In the plug-inB. In a Citrix policyC. In the farm propertiesD. In the Web Interface site properties



QUESTION 19Which option is used to establish farm-wide shadowing settings to force a shadow acceptance prompt andforce logging on all shadow connections?

A. Citrix policyB. Shadow TaskbarC. XenApp Server Role ManagerD. Web Interface Management Console




QUESTION 20Where is CPU Utilization Management configured?

A. Farm propertiesB. Citrix Users policyC. Citrix Computers policyD. Worker Group properties



Incorrect answer:"Farm Properties"while this would have been correct in prior versions, the only option in Xenapp 6 under "Farm properties" isconfiguration logging. all other settings were moved to policies.

QUESTION 21An administrator wants to know the server load for a server named CTXXA01.

Which two commands can an administrator use from any Citrix server in the farm to get the proper results?(Choose two.)

A. qfarm /loadB. query farm CTXXA01 /loadC. query user /server:CTXXA01D. query session /server:CTXXA01

Correct Answer: ABSection: BExplanation


QUESTION 22Scenario: The Citrix IMA Service test in Health Monitoring and Recovery is configured to run on a server. Anadministrator needs to ensure that if the test fails, existing ICA connections are maintained and attempts toreconnect disconnected sessions are made, but new ICA sessions cannot be started on the server.

"Pass Any Exam. Any Time." - 100% Pass Guarantee 10Citrix 1Y0-A18 ExamWhich recovery action must the administrator select for the test?

A. Alert OnlyB. Restart IMAC. Reboot ServerD. Remove Server from load balancing

Correct Answer: DSection: BExplanation


QUESTION 23Scenario: An administrator for an organization needs to limit the sessions to one connection for vendors andauthenticated users. However, HR department members must run two sessions at once. The administratorcreates three policies to control the number of user sessions.

- Policy A Limits ALL users to one session

- Policy B Limits Vendors to one session

- Policy C Limits HR to two sessions

In order to ascertain the policy behavior the administrator must determine the level of priority to allow the HRdepartment access to multiple sessions. Which priority is needed to apply these policies and to ensure that HRis able to run two sessions simultaneously?

A. Set the priority of Policy B to the highest level, Policy C to the next level and Policy A to the lowest level.B. Set the priority of Policy B to the highest level, Policy A to the next level and Policy C to the lowest level.C. Set the priority of Policy A to the highest level, Policy B to the next level and Policy C to the lowest level.D. Set the priority of Policy C to the highest level, Policy B to the next level and Policy A to the lowest level.



QUESTION 24Scenario: An administrator needs to configure the XenApp farm in a highly secure environment. All

"Pass Any Exam. Any Time." - 100% Pass Guarantee 11Citrix 1Y0-A18 Examadministrative actions must be logged, even if the configuration logging database is unavailable.

Which two options must the administrator configure to make this as secure as possible? (Choose two.)

A. Ensure all administrators know the database password.B. Enable IMA encryption before enabling configuration logging.C. Use a shared database account for access to the configuration logging database.D. Ensure the 'Allow changes to the farm when logging database is disconnected' option is not selected.

Correct Answer: BDSection: BExplanation


QUESTION 25Which role is assigned to a custom XenApp Administrator by default?

A. Add server to farmB. View Administrators

C. Log on to Management ConsoleD. View all areas of server farm management

Correct Answer: CSection: BExplanation


QUESTION 26Scenario: An administrator wants to use session sharing for all published applications. All applications areinstalled and published on all of the servers in the farm.

What else must the administrator do to ensure that session sharing is used?

A. Specify file type associations.B. Enable the Connection access control policy rule.C. Ensure the offline plug-in is installed on client devices.D. Configure all published applications with the same settings.




QUESTION 27Scenario: An administrator is setting up a new XenApp environment for a warehouse. Thin clients will be usedwith a Linux-based operating system and XenApp will be delivered across a low speed wide area network.Users will need to be given an experience similar to what is available from a Windows desktop operatingsystem.

Which type of published application will allow for this?

A. Server DesktopB. Remote DesktopC. Published contentD. Published application, Explorer.EXE, installed on a server

Correct Answer: ASection: BExplanation


QUESTION 28Scenario: Users frequently open documents on their local PCs. Going forward, an administrator plans to havethe users open documents with the published application on the XenApp servers.

Which action must the administrator take to accomplish this?

A. Install the offline plug-in.B. Configure the Web Interface to allow content redirection.C. Verify the Client drive redirection user policy is enabled.D. Associate the required file type to the published application.



QUESTION 29Which two statements are correct for an application delivered to a client device by Citrix application streaming?(Choose two.)


A. It requires the offline plug-in to be installed.B. It can be used when connected to the network.C. It consumes CPU and memory resources on the XenApp server.D. Screen updates are sent from the server using the ICA protocol.



QUESTION 30Scenario: An administrator has been asked to roll out a new version of an existing application. The newsoftware needs to be deployed alongside the existing version without making any permanent changes to theXenApp servers. Clients are a mixture of Windows and Linux thin clients and all have the XenApp online plug-ininstalled.

How should the administrator roll out the application?

A. Create a streaming profile of the new application, and publish the application using the 'Streamed to client'profile.

B. Create a streaming profile of the new application, then publish the application using the 'Accessed from aserver' and 'Streamed to server1 profile.

C. Upgrade the existing version of the software on the XenApp servers, and publish the application using the'Accessed from a server' and 'Installed application' profile.

D. Install the new version of the application onto a different XenApp server, and publish the application usingthe 'Accessed from a server' and 'Installed application' profile.

Correct Answer: BSection: BExplanation

Explanation/Reference:Explanation:Since the application is being streamed it can exists on the same XenApp server as another version of theapplication because it is isolated.

QUESTION 31Which two steps are required to profile an application? (Choose two.)

A. Create a PROFILE package.B. Store the package on a file share.C. Create an unattended .MSI package.D. Store the package on each XenApp server.




QUESTION 32Scenario: After the CRM application has been streamed on the XenApp servers, users complain that they canno longer open contracts for customers stored in the Adobe Acrobat file format through the CRM application.Adobe Acrobat has also been streamed to the XenApp servers.

How should the administrator solve this issue?

A. Create a new .MSI package for Adobe Acrobat and publish it.B. Create a new .PROFILE package for Adobe Acrobat and publish it.C. Create an inter-isolation link between the CRM application .PROFILE file and the Adobe Acrobat .PROFILE

file with the streaming application profiler.D. Select a .PDF file on all XenApp servers, select 'pen With' and make sure that Adobe Acrobat has been

associated with .PDF files. Select 'Always use the selected program to open this kind of file'.



QUESTION 33Scenario: An administrator has been asked to configure server-side streaming to the XenApp servers. Theapplication package has been published. Which component is required for server- side streaming?

A. Online plug-inB. Offline plug-inC. Load throttlingD. Client-to-server redirection

Correct Answer: BSection: BExplanation


QUESTION 34

"Pass Any Exam. Any Time." - 100% Pass Guarantee 15Citrix 1Y0-A18 ExamScenario: An administrator has been monitoring activity on the XenApp servers and determined that most usersin an environment access published resources Monday through Friday between7:00 am and 7:00 pm. The administrator would like to consolidate the number of active sessions outside of thistime period to five servers.

Which component should the administrator configure to complete this task?

A. Load balancing policiesB. Preferential load balancingC. Health Monitoring and RecoveryD. Power and Capacity Management



QUESTION 35What is the proper extension for a roaming profile in the template location for Citrix Profile Management?

A. .DATB. .LOGC. .MAND. .PROFILE

Correct Answer: ASection: BExplanation


QUESTION 36Scenario: A company has six servers in the farm. The administrator wants to direct all connections by Researchand Development (R&D) employees to Server1. If Server1 becomes unavailable, user connections should bedirected to any available server in the farm.

What must the administrator do to direct these connections to the appropriate servers?

A. Provide Server 1 with a lower priority than the other servers.B. Provide Server 1 with a higher priority than the other servers.C. Create two worker groups and configure a load balancing policy.D. Add the R&D employees to two worker groups and configure a load balancing policy.




QUESTION 37Scenario: There are 20 servers in a farm. A resource-intensive application is published on five of the servers.An administrator needs to create a load evaluator that reports a full load when the number of users connectingto one of the five servers hosting the application exceeds 60. The administrator must also ensure that onlyusers in a particular location can access the five servers hosting the application.

Which two load management rules must the administrator configure for the load evaluator? (Choose two.)

A. IP RangeB. SchedulingC. Load ThrottlingD. Server User Load

Correct Answer: ADSection: BExplanation


QUESTION 38Scenario: A company has nine servers in the farm. An administrator wants to set the preference for userconnections from Austin to three specific servers.

What must the worker group contain to direct Austin user sessions to these servers?

A. The servers in the farmB. The Austin user accountsC. The three specific serversD. The Austin user accounts and servers



Correct answer would be "the three specific servers" as a worker group is a server resource, and users cannotbe added to a worker group.


QUESTION 39Scenario: A farm contains 10 servers. An application is published on two of the servers. An administrator needsto apply a load evaluator that reports a full load when the number of users connecting to the applicationexceeds 100.

Which load evaluator would the administrator use to meet the requirements of the scenario?

A. Default load evaluator assigned to the serverB. Custom load evaluator assigned to the serverC. Custom load evaluator assigned to the applicationD. Advanced load evaluator assigned to the application



QUESTION 40Users are experiencing issues when attempting to connect to published resources through Access Gateway.Which two should the administrator monitor? (Choose two.)

A. Terminal ServicesB. Citrix XTE ServiceC. Citrix IMA NetworkingD. Secure Ticket Authority

Correct Answer: BCSection: BExplanation


QUESTION 41For which scenario would the Advanced load evaluator be most appropriate for the environment?

A. The number of users allowed to connect to a server should be limited to 100. Maximum load for serversmust be determined by read and write operations.

B. The number of users allowed to connect to a selected application needs to be limited to 100.Maximum load for servers must be determined by page swaps."Pass Any Exam. Any Time." - 100% Pass Guarantee 18Citrix 1Y0-A18 Exam

C. A resource- and memory-intensive application is published on the servers in a farm. When CPU or memoryusage reaches 90 percent, a full load should be reported.

D. An administrator needs to schedule availability of selected servers or applications. Only users connectingfrom client devices within a certain IP address range can access published resources on servers.

Correct Answer: CSection: CExplanation


QUESTION 42Scenario: A company has published a memory-intensive application on all servers in the farm. By default, eachserver is expected to run 100 sessions. All servers have enough memory to run the application when othersessions NOT running the memory-intensive application are running on the server. Testing has revealed thatthe application requires at least 50% free memory to launch on a server.

How can the administrator ensure that the application will only be started on a server when it has sufficientresources available?

A. Configure the Memory Usage rule to 50% in a custom load evaluator and assign it to the servers.B. Configure the Memory Usage rule to 50% in a custom load evaluator and assign it to the application.

C. Configure the Server User Load rule to 50 sessions in a custom load evaluator and assign it to the servers.D. Configure the Server User Load rule to 50 sessions in a custom load evaluator and assign it to the

applications.

Correct Answer: BSection: CExplanation


QUESTION 43Scenario: Users from the marketing department need to print on several printers. They are complaining that thedefault printer in their published applications is NT the same as the default printer on their workstations. Anadministrator published the application with the option "Start this application without waiting for printers to becreated" enabled.

Which action must the administrator take to resolve this issue?


A. Create a user policy; add Printing\Client printer redirection to the 'Allowed' list; assign this policy with a filter,selecting marketing group.

B. Create a user policy; add Printing\Default printer to 'Set default printer to the client's main printer'; assignthis policy with a user filter, selecting marketing group.

C. Make sure the client Default printer option is disabled in the settings tab of the connection properties in theCitrix Remote Desktop Session Host Configuration tool.

D. Create a user policy in the Active Directory (Windows Component\Remote Desktop Services\RemoteDesktop Session\Printer Redirection); enable the "Redirect only the default client printer" setting; assign it tothe marketing group.



QUESTION 44In which two ways can an administrator prevent printer drivers from being installed? (Choose two.)

A. Use Windows Print Management.B. Enable the Printer driver mapping and compatibility policy.C. Use the Active Directory group policy to block driver installation.D. Configure the automatic installation of in-box printer drivers policy.

Correct Answer: CDSection: CExplanation


QUESTION 45Scenario: A Citrix administrator of a large hospital's IT infrastructure is asked to configure XenApp printing fornurses who move between workstations. All terminals are configured to connect to a Web Interface server, and

all floors have a dedicated subnet and floor specific machine IDs. The administrator needs to make sure usersalways print to the network print device closest to the device they are connecting from.

How will the administrator complete this task?

A. Configure a Session Printers policy for each subnet. Filter the policies based on Users.B. Configure a Session Printers policy for each subnet. Filter the policies based on Client IP address.C. Configure an Auto-create client printers policy for each group of machine IDs. Filter the policies based on

Client Name.D. Configure an Auto-create client printers policy for each group of machine IDs. Filter the policies "Pass Any

Exam. Any Time." - 100% Pass Guarantee 20Citrix 1Y0-A18 Exambased on Access Control.



QUESTION 46Which statement correctly describes Citrix universal printing?

A. Citrix universal printing is a solution that will allow a XenApp server to act as a print server.B. Citrix universal printing is a solution that allows printing without the need to install a local printer.C. Citrix universal printing is a solution that will allow printing regardless of the operating system of the client

device.D. Citrix universal printing is a solution that allows users to print whether or not the correct print drivers are

installed

Correct Answer: DSection: CExplanation


QUESTION 47Under which two circumstances would an administrator create a printer driver mapping policy? (Choose two.)

A. A specific driver is not allowed on the server.B. A printer must be available while disconnected.C. The drivers on the client and server are named differently.D. The printing profile must be redirected to the client device.

Correct Answer: ACSection: CExplanation


QUESTION 48An administrator must configure printing in an environment to make network printers automatically appear to allusers without any setup. Which policy must the administrator implement to accomplish this?


A. Default printersB. Session printersC. Universal printingD. Auto-create generic universal printer



QUESTION 49Scenario: An environment contains a previously configured XenApp Services site that points to the originalXenApp farm. An administrator needs to configure a Web Interface server to connect multiple XenApp farms sothat users can access their applications using the local start menu on their PC with the Citrix online plug-in.

How can the administrator configure the Web Interface server using the Web Interface Management Consolefor this scenario?

A. Using the XenApp Web site section, add at least one server in each farm to the previously configured farmand change the XML port so it is different.

B. Using the XenApp Services site section, add at least one server in each farm to the previously configuredfarm and change the XML port so it is different.

C. Using the XenApp Services site section, add a new farm for each additional farm and at least one server inthat farm to the manage farms option; enter the correct XML port information.

D. Using the XenApp Web site management section, add a new farm for each additional farm and at least oneserver in that farm to the manage farms option; enter the correct XML port information.



QUESTION 50Scenario: An administrator is implementing an Access Gateway solution and needs to configure the internalWeb Interface server for use with an external Access Gateway. The administrator has already created a newXenApp Web site named "external."

Click the 'Exhibit' button to view the secure access option for the external web site.


Which option most thoroughly describes the required steps?

A. Select the access method 'Direct', enter the FQDN of the internal URL, specify two XenApp servers asSecure Ticket Authority servers and select the 'Use for load balancing' option.

B. Select the access method 'Translated', enter the FQDN of the internal URL, specify two XenApp servers asSecure Ticket Authority servers and select the 'Use for load balancing' option.

C. Select the access method 'Gateway Direct', enter the FQDN of the external URL, specify two XenAppservers as Secure Ticket Authority servers and select the 'Use for load balancing' option.

D. Select the access method 'Alternate', enter the FQDN of the external URL, specify two Web Interfaceservers as Secure Ticket Authority servers and select the 'Use for load balancing' option.



QUESTION 51A company has deployed a new Secure Access Gateway device to secure external connections to theirXenApp farm.

Which change needs to be made to the XenApp Services web site in order to provide secure

"Pass Any Exam. Any Time." - 100% Pass Guarantee 23Citrix 1Y0-A18 Examaccess to XenApp resources through the Secure Access Gateway device?

A. Set the client-side proxy settings to 'Secure (HTTPS)'.B. The Secure Access Method needs to be configured to 'Gateway direct'.C. Kerberos authentication needs to be enabled in the properties of the Authentication method.D. The FQDN of the Secure Access Gateway needs to be specified in the Secure Access Method properties.



QUESTION 52Scenario: The administrator wants to configure Web Interface so users can access their applications using abrowser. Some users will use pass-through with smart card authentication, while others will use smart cardauthentication only.

What must the administrator do to satisfy the requirements of these users?

A. Enable both authentication methods for a single Web Interface site.B. Create a Web Interface Services site and apply both authentication methods.C. Enable Pass-through authentication to pass the Windows logon method to a site.D. Enable Explicit authentication to allow the site to adapt the authentication method.

Correct Answer: ASection: CExplanation


QUESTION 53Scenario: An administrator wants to configure the enumeration speed for two Web Interface servers to ensurethe fastest response time possible for users. The datacenter for the XenApp servers is 500 miles from office"A" and 1200 miles from office "B".

Which location for the Web Interface servers will optimize the enumeration speed of user applications?

A. In the datacenter on the same subnet as XenApp serversB. One web server in each office to be accessed by local usersC. In the datacenter on the same subnet with only Web servers to isolate HTTP trafficD. One in the datacenter, one in Office "A" with users directed to the closest web server "Pass Any Exam. Any

Time." - 100% Pass Guarantee 24Citrix 1Y0-A18 Exam



QUESTION 54Scenario: An administrator has just configured a Web Interface server. The XenApp farm is configured with thedefault settings. The data collector is CTXDC01 and the member server is CTXXA01.

Click on the 'Exhibit' button to review the scenario.

What is the issue in this scenario?

A. In the XML port field, the value should read "80."B. In the Resources types field, the value should read "Offline."C. In the Authentication methods field, the value should read "Prompt."D. In the XML Service field, the value should read "CTXDC01, CTXXA01."

Correct Answer: ASection: CExplanation



QUESTION 55Scenario: An administrator wants to add the ability to stream applications to XenApp servers in an environmentin order to cut down on the number of applications installed and managed. Users currently access the installedapplications on the XenApp servers using the Citrix online plug-in configured with the URL of a XenAppServices site configured for online access.

Which two steps are required to achieve the desired functionality? (Choose two.)

A. Install the Citrix offline plug-in on the XenApp servers.B. Install the Citrix offline plug-in on the user's client device.C. Change the existing XenApp Services site configuration resource type to 'Dual Mode'.D. Create a new Xen App Services site and choose the 'Offline' resource type; configure the existing XenApp

Services site to use the new site as a backup.

Correct Answer: ACSection: CExplanation


QUESTION 56Scenario: A company has successfully implemented a XenApp farm together with a dedicated Web Interfaceserver. All clients are configured with the Citrix online plug-in and the site name for the configured site withinWeb Interface is XAPROD. To increase the high availability of the solution, an administrator configures asecond Web Interface server.

What must the administrator configure to ensure that users can still connect to their applications even in theevent of a Web Interface server failure?

A. The Backup option within the server settings of the XAPROD site in the XenApp Web site node.B. The redirection option within the server settings of the XAPROD site in the XenApp Web site node.C. The Backup option within the server settings of the XAPROD site in the XenApp Services site node.D. The redirection option within the server settings of the XAPROD site in the XenApp Services site node.


Explanation/Reference:Explanation: The question is asking about an XenApp Service site, because the clients are all using the OnlinePlugin. And for high availability you need to configure backup settings within the server settings for the XenAppService site.


QUESTION 57Scenario: Several printers are set up on each user's Windows workstation. Users are complaining on a dailybasis that XenApp published applications take too long at start-up.

Which two actions could an administrator take to reduce start-up time? (Choose two.)

A. Reduce the number of print drivers loaded at start-up.B. Set up only the default printer on the client to be Auto-created.C. Set up Auto-created printer creation after application launches.D. Allow users to self-provision printers by publishing the ICA Client Printer Configuration tool.

Correct Answer: BCSection: CExplanation


QUESTION 58When using the qfarm /load command, what would be displayed as the server load value when a server has afull load?

A. 0B. 1000C. 9999D. 10000



QUESTION 59An administrator needs to reset the session of a user who has become disconnected.

Which two tools will allow the administrator to accomplish the reset against a remote server? (Choose two.)

A. Performance monitorB. Windows Task ManagerC. Delivery Services Console


D. Remote Desktop Services Manager

Correct Answer: CDSection: CExplanation

Explanation/Reference:Explanation:The question says REMOTE server. You cannot connect to a REMOTE server using task manager, only localusers can be disconnected this way. The correct answer is Remote Desktop Services Manager and CitrixDelivery Services Console.

QUESTION 60The ActiveX control required by the Web Interface is NOT allowed to run with the current Internet Explorersettings. How should an administrator resolve this issue?

A. Add the site to the Local Intranet trusted sites.B. Reset the client Internet Explorer setting to the default to allow ActiveX controls.C. Under the Advanced security tab, select 'Allow active content to run files on my computer.'D. Add the Web Interface site to the Trusted Sites within IE using the Default security settings for the zone.



QUESTION 61Scenario: Using a custom load evaluator that utilizes only the Server User Load with the default setting, anadministrator wants to use the qfarm /load command to see the server load value.

What is the value the administrator will see displayed for a server with 17 users with active connections and twodisconnected sessions?

A. 17B. 19C. 1700

D. 1900

Correct Answer: DSection: DExplanation

Explanation/Reference:Explanation:Disconnected sessions count toward server load value.


QUESTION 62Which two conditions could prevent the Citrix Universal Printer from appearing in the list of users' auto-createdprinters? (Choose two.)

A. The driver is not supported.B. The user is running a terminal device.C. The user is running an outdated online plug-in.D. The driver is on the blacklist in the Printer driver mapping and compatibility policy.

Correct Answer: BCSection: DExplanation


QUESTION 63Scenario: Some users complain that they cannot reconnect to their disconnected sessions. After investigation,the administrator discovers that no users are able to connect to Server1.

Which two issues could cause the problem? (Choose two.)

A. Logons have been disabled for ServerlB. Online plugin is not installed on ServerlC. IMA Service is not running on the Server1D. Session reliability has been enabled on Server1

Correct Answer: ACSection: DExplanation


QUESTION 64Users are complaining that their local printers are NOT available in their XenApp sessions when running from aWindows client. Which troubleshooting step should the administrator take?

A. Install the Universal Print driver on the client device.B. Verify a network printer is set up on the client device.


C. Check that Session printing is enabled in the Citrix policy.

D. Verify that the Auto-create client printers policy rule does not prohibit printer creation.


Explanation/Reference:Explanation:Here is a screenshot of the Citrix console showing the setting to check.

QUESTION 65Which two database platforms are supported for the data store? (Choose two.)

A. OracleB. IBM DB2C. Micosoft AccessD. Micosoft SQL Server

Correct Answer: ADSection: DExplanation



QUESTION 66The main application used in an organization is the CRM application, which is published in a separateapplication folder called CRM. You are asked to configure delegated administration rights for the CRM helpdesk. The CRM help desk's administrative rights will need to be limited to:

- Only View areas of the Delivery Services Console related to the CRM application.

- Perform session tasks related to their job, such as resetting sessions for users connected to the CRMapplication.

Which approach would give the required result for the CRM help desk?

A. Configure View Only permissions for the Delivery Services Console and configure Full administrationpermissions for the sessions node.

B. Configure View Only permissions for the Delivery Services Console and configure Full administrationpermissions for the CRM folder application folder.

C. Configure View Only permissions for Published Applications and Content and configure Full administrationpermissions for "Sessions" under the servers node.

D. Configure View Only permissions for Published Applications and Content and configure Full administrationpermissions for "Sessions" under the CRM folder in the application node.



QUESTION 67Which statement describes why an administrator would configure SmoothRoaming?

A. To allow a user session to be shared for collaborative inputB. To allow a user to open sessions regardless of the type of client device.C. To allow an active session to follow the user regardless of the client device location.D. To allow a user to have multiple sessions open on multiple client devices at the same time.

Correct Answer: CSection: D

Explanation


QUESTION 68An administrator should configure CPU Utilization Management when needing to

"Pass Any Exam. Any Time." - 100% Pass Guarantee 31Citrix 1Y0-A18 Exam__________. (Choose the correct option to complete the sentence.)

A. ensure that CPU resources are equally sharedB. ensure CPU shares are allocated to all users with an active sessionC. Provide a share of the CPU greater than that allocated to fellow usersD. Works in conjunction with Microsoft Dynamic Fair Share Scheduling (DFSS)

Correct Answer: ASection: DExplanation


QUESTION 69A company plans to profile their HRM application and Adobe Acrobat to one profile package and publish bothapplications as separate published applications. The HRM application uses Adobe Acrobat to open thecompany's policy and guideline document for reference through the HRM application.

Which action can an administrator take to accomplish this?

A. Publish the HRM application as a streamed application, and set the .PDF file type association.B. and Adobe Acrobat. Publish the HRM application and set the .PDF file type association.C. Use the streaming application profiler to create one profile package for the HRM application and Adobe

Acrobat. Publish the HRM application and Adobe Acrobat as a streamed application using the same .PROFILE package.

D. Use the streaming application profiler to create separate packages for the HRM application and AdobeAcrobat. Create an inter-isolation link between the two packages so you can publish both applications fromthe HRM .PROFILE file.

Correct Answer: CSection: DExplanation


QUESTION 70An administrator configured Power and Capacity Management for a farm. The administrator needs to performmaintenance on some of the power managed servers but would like to maintain the current Power andCapacity Management configurations.

Which method should the administrator use to complete this task?


A. Disable Power and Capacity Management and re-enable it once maintenance is complete.B. Use a manual override to adjust the setpoint values and cancel the override once maintenance is complete.C. Delete the Power and Capacity Management schedule for maintenance and re-create it once maintenance

is complete.D. Change the server control mode to Managed (base load) during maintenance and change it to Unmanaged

once maintenance is complete.

Correct Answer: BSection: DExplanation


QUESTION 71Scenario: A company has ten servers in the farm. An administrator has configured worker groups. Theadministrator wants to force user connections to five specific servers by default, and fallback to the five backupservers when the five specific servers have reached the maximum number of user connections. At this time, alluser connections are being directed to the five backup servers.

What must the administrator do to direct the user connections to the correct servers?

A. Power off the five backup servers until neededB. Reverse the priorities assigned to the worker groups.C. Disable the load balancing policy for the five backup servers.D. Use a custom load evaluator to increase the load bias on the five backup servers.



QUESTION 72Under which two circumstances would you choose to install and use a native Windows printer driver rather thanusing the Citrix universal driver? (Choose two.)

A. Users are printing to client-side printersB. There are Mac clients in the environmentC. Some features of the printer are not available.D. Printing-related network traffic needs to be reduced.


Explanation/Reference:"Pass Any Exam. Any Time." - 100% Pass Guarantee 33Citrix 1Y0-A18 Exam

Explanation:

QUESTION 73Scenario: An administrator must reconfigure a Web Interface web site for a test environment with one XenAppserver in the servers list. This farm is comprised of 10 servers; there is no dedicated data collector. A server

rebuild in this environment normally takes 90 minutes.

Which actions should the administrator take to ensure that the Web Interface application enumeration is notbeing affected by XenApp server outages?

A. Within the Server Farm option of the XenApp Web site, modify the existing farm, check 'Use the server listfor load balancing' and set the 'Bypass any failed server' setting to two hours.

B. Within the Server Setting option of the XenApp Web site, modify the existing farm, add 10 XenApp serversto the server list, check 'Use the server list for load balancing' and set the 'Bypass any failed server' settingto one hour.

C. Within the Server Farm option of the XenApp Web site, modify the existing farm, add five XenApp serversto the server list, check 'Use the server list for load balancing' and set the 'Bypass any failed server' settingto two hours.

D. Within the Server Setting option of the XenApp Web site, modify the existing farm, add a XenApp server tothe server list, uncheck 'Use the server list for load balancing' and set the 'Bypass any failed server' settingto 90 minutes.

Correct Answer: CSection: DExplanation


QUESTION 74When an administrator opens a published Notepad application, the administrator can see all auto-createdprinters on the XenApp server but cannot print to other users' auto-created printers.

How can the administrator correct this issue?

A. Modify the print server properties.B. Modify the policy to enable access to client printers.C. Add the Universal Printer to each XenApp server in the farm.D. Add the users to the Administrator group on the Windows client device.




QUESTION 75What is the maximum numbers of hours that a data store can be unavailable before applications will becomeunavailable ?

A. 24B. 48C. 72D. 96

Correct Answer: DSection: D

Explanation


QUESTION 76Which two events will initiate a data collector election ? (Choose two)

A. A new worker group is created.B. New Serves were added to the farm.C. An existing data collector is unavailable.D. Discovery is run from Delivery Services Console.


Explanation/Reference:Explanation:CXA-204-1I Seite 45The data collector election process automatically initiates in the event that the existing data collector isunavailable or new servers were added to the farm.

QUESTION 77Scenario: A XenApp Farm consists of one zone. Server A current zone data collector, its election preference isset to "default Preference". Another server, Server B, is added to the farm. Which two circumstances wouldcause Server B to become the new zone data collector ? (Choose two)

A. The IMA service on Server B is restarted.B. Server B selection preference is set to "Preferred".


C. Server B is added to the farm causing the zone election.D. The IMA on Server B is a newer version than the IMA on Server A.

Correct Answer: BDSection: DExplanation

Explanation/Reference:Explanation:CXA-204-1I Seite 45/46By default, XenApp uses thefollowing criteria to determine which server wins the election and becomes the data collector:1. Highest XenApp version (also referred to as Host Record Version) - Servers with the most recent software,XenApp 6, will have a Host Record of 1, which is the highest.2. XenApp server ranking - XenApp servers can be configured with the following rankings using the SetElection Preference menu in the Delivery Services Console:· Most Preferred (1)· Preferred (2)· Default Preference (3)· Not Preferred (4)

QUESTION 78Which port is used by the Citrix IMA Service ?

A. 2512

B. 2513C. 2598D. 8082



QUESTION 79Scenario: A Company´s three datacenters (London, New York and Paris) each contain 50 XenApp servers. Thecompany has a fourth office in Singapore that does NOT contain a datacenter. A low latency, high bandwidthnetwork link connects the London and Paris offices. The network latency between New York and Paris andNew York and London is poor, and bandwidth is restricted.

What is the optimal zone configuration for the farm ?


A. Configure a zone for each office (four in total).B. Configure a zone for each datacenter (three in total).C. Configure a single zone containing London, Paris and New York servers.D. Configure one zone containing both London and Paris servers, and another for New York (two in total).


Explanation/Reference:Explanation:Since there is a low latency high bandwidth link between London and Paris they should be in the same zone.

Reference:http://support.citrix.com/proddocs/topic/xenapp6-w2k8-designing/ps-planning-zones- wans-v2.html

For example, an organization with 20 farm servers in London, 50 servers in New York, and three servers inSydney could create two or three zones. If the Sydney location has good connectivity to either New York orLondon, Citrix recommends grouping Sydney with the larger location. Conversely, if the WAN connectionbetween Sydney and the other locations is poor or zone preference and failover is required, Citrix recommendsconfiguring three zones.

Consider these zone design guidelines:

Minimize the number of zones in your farm.

Create zones for major datacenters in different geographic regions.

If a site has a small number of servers, group that site in a larger site's zone.

If your organization has branch offices with low bandwidth or unreliable connectivity, do not place those branchoffices in their own zone. Instead, group them with other sites with which they have the best connectivity. Whencombined with other zones, this might form a hub-and-spoke zone configuration.

If you have more than five sites, group the smaller sites with the larger zones. Citrix does not recommendexceeding five zones.

QUESTION 80Which statement correctly describes the behavior of the XenApp Server Role Manager ?

A. Remote Desktop Services will be automatically installed. A XenApp server restart can be initiated from theXenApp server Role Manager.

B. Remote Desktop Services will need to be installed separately. A XenApp server restart can be "Pass AnyExam. Any Time." - 100% Pass Guarantee 37Citrix 1Y0-A18 Examinitiated from the XenApp server Role Manager.

C. Remote Desktop Services will be automatically installed. The delivery services consoles can be launchedfrom the XenApp Server Role Manager.

D. Remote Desktop Services will need to be installed separately. The XenApp Server Configuration Tool canbe launched from the XenApp Server Role Manager.


Explanation/Reference:Explanation:Server Role Manager will install prerequisites and allow you to restart a server. You can't launch the DeliveryServices Console from it.

Reference: http://support.citrix.com/proddocs/topic/xenapp6-w2k8/ps-install-config-wrapper.html

QUESTION 81An Administrator has been asked to build a XenApp 6 server and make the applications published on itavailable to the users of a legacy XenApp 5 farm.

Which two tasks must the administrator perform ? (Choose two)

A. Create a new farm.B. Join the Server to the existing farm.C. modify the Web Interface to see multiple farms.D. Create a user policy to allow users to see all of the applications.

Correct Answer: ACSection: EExplanation


QUESTION 82Scenario: Many users at a company use high-detail images. In an attempt to improve user interactivity whendisplaying these images, the administrator wants to configure HDX 3D Progressive Display to a high imagequality.

Which progressive compression level should the administrator select to meet this goal ?

A. LowB. MediumC. HighD. Very High


Correct Answer: ASection: EExplanation

Explanation/Reference:Explanation: The question is about HDX 3D progressive display. According to the Citrix Course Guide CXA-20402I on page 326 if you set Progressive Compression level to Low, you will have a High Image quality.

QUESTION 83Scenario: Application A and application B are available on multiple serves. Users access these applicationsfrom the Web interface. A user logs in to application A at 8:15am and application B at 9:45am. Theadministrator notices in the Delivery Services Console that the user has opened separate sessions on differentservers.

Why are separate sessions being created ?

A. The application were launched more than on hour part.B. The application were launched within the same hour-long interval.C. The application load evaluator assigned to the application A was reporting a full load.D. The color depth setting on published application A is different than on published application B.

Correct Answer: DSection: EExplanation


CXA-204-1i Seite 203Allapplications in a shared session must be published with the same settings.

QUESTION 84Scenario: Users must have the Citrix online plug-in installed before they try to access published resources fromthe Web Interface. The administrator created a home page from which users will access Web interface.

Which two additional steps must the administrator take to ensure that the plug-in is automatically downloadedand installed for users when they access the Web interface ? (Choose two)

A. Configure the Web Interface to install the native client.B. Use command line parameters to silently install plug-in.C. Extract the plug-in .MSI files from CitrixOnlinePluginFull.EXE manually.D. Add the Site from which the plug-in is downloaded to the Trusted Sites zone.


Correct Answer: BDSection: EExplanation


QUESTION 85Scenario: Many users in an environment use USB devices such as 3D Mice and Webcams. Some of theseusers are complaining that their USB devices do NOT

work correctly in their sessions.

Which two situations could cause the issues being experienced by some users ? Choose two)

A. 16-bit color depth is being usedB. Multiple monitors are being usedC. High-latency connection is being used.D. High-bandwidth connection is being used.E. ICA Pass-through connection is being used.

Correct Answer: ABSection: EExplanation


QUESTION 86Scenario: Doctors at a hospital must be able to start and access an application from multiple locations withinthe Hospital.

If the doctor disconnects from one workstation he must be able to reconnect to the same session from adifferent workstation.

Which feature will allow the doctor to access his session from multiple workstations ?

A. Worker groupsB. Session ReliabilityC. Workspace ControlD. Pass-through authentication

Correct Answer: CSection: EExplanation


QUESTION 87"Pass Any Exam. Any Time." - 100% Pass Guarantee 40Citrix 1Y0-A18 ExamScenario: An administrator is tasked with providing a solution for doctors to maintain access to visualizedapplications while traveling.

The doctor have high speed access that has intermittent connectivity.

Which two plug-ins will be used for client-side application virtualization ? (Choose two)

A. Web ClientB. Online plug-inC. Client for javaD. Offline plug-in

Correct Answer: BDSection: EExplanation



QUESTION 88An organization plans to restrict Delivery Services Console access to servers in the HR department to the HRadministrators group.

Which two actions can an administrator take to archive this ? (Choose two)

A. Create a worker group containg the HR servers and remove the non-HR administrators from the workergroup permission.

B. Move the computer accounts for the HR servers to an Active Directory OU to which only the HRadministrators group has permissions.

C. Create an HR servers folder in the servers node of the Delivery Services Console and remove the non-HRAdministrators from the folder permissions.

D. Create an Actice Directory security group containig the HR administrators and add the group as a customfarm administrator with access to the HR servers.

Correct Answer: CDSection: EExplanation


QUESTION 89Where is configuration logging enabled ?

Exhibit:


A. Citrix policyB. Farm PropertiesC. Application PropertiesD. XenApp Server Role Manager

Correct Answer: BSection: EExplanation


QUESTION 90"Pass Any Exam. Any Time." - 100% Pass Guarantee 42Citrix 1Y0-A18 ExamAn Administrator wants to use a custom test to monitor server performance with Health Monitoring & Recovery.

Where should the administrator store the custom test according to best practices ?

A. %Program Files%\Citrix\HealthMon\Tests\CustomB. %Program Files%\Citrix\Server Resource Management\C. %Program Files%\Citrix\Independent Management Architecture\D. %Program Files%\Common files\Citrix\HealthMon\Tests\Custom\



http://support.citrix.com/servlet/KbServlet/download/12697-102-16451/HMR_test_Whitepaper.pdf Seite 5Test File LocationHealth Monitoring & Recovery runs tests only from the Health Monitoring & Recovery test location directory: %Program Files%\Citrix\HealthMon\TestsTo run tests that are not developed by Citrix, you must copy them into the following subdirectory:%Program Files%\Citrix\HealthMon\Tests\CustomHealth Monitoring & Recovery runs custom tests from this location only. Local administrator privileges arerequired to copy files into this location.

QUESTION 91Which statement describes virtual memory optimization ?

A. Occurs only on server bootupB. Optimizes all .EXEs that are installed on the serverC. Changes the location where individual .DLLs are loaded in memoryD. Allocates the same amount of physical memory to each user session on the server



QUESTION 92How can an administrator determine which Citrix policies have been applied to a specific users ?


A. use the gpresult commandB. Use the Delivery Services ConsoleC. Use the Group Policy Management consoleD. Use the Web Interface Management Console



QUESTION 93Scenario: A payroll application needs to be streamed on the XenApp servers to reduce the time it takes to applyweekly updates. Additionally, a reporting tool has also been streamed to the XenApp servers. Users are nowcomplaining that they can no longer create and open the application files. These files export salary calculationsgenerated by the reporting tool.

How should an administrator resolve this issue ?

A. Create a new .MSI package for the reporting tool and publish it.B. Create a new .PROFILE package for the reporting tool and publish it.C. Create an inter-isolation link between the payroll application .PROFILE file and the reporting tool .PROFILE

file with the streaming application profile.D. Select a .SAL file on all XenApp servers, select "Open with" and make sure that reporting has been

associated with .SAL files. Select "Always use the selected program to open this kind of file"



QUESTION 94How can a user return to their local desktop from a published server desktop using a key sequence ?

A. Alt+F"B. Alt+ESCC. Ctrl+F2D. Shift+F2



"Pass Any Exam. Any Time." - 100% Pass Guarantee 44

Citrix 1Y0-A18 Exam

QUESTION 95Scenario: A Company wants to make a CRM application available to users when they are connected to thenetwork. The CRM application is resource intensive and the company does not want to purchase additionalXenApp servers to host the application.

Which two tasks must the administrator perform to meet the requirements ? (Choose two)

A. Publish the application to stream to clientB. Publish the application to stream to serverC. Install the online plug-in on all client devices.D. Install the offline plug-in an all client devices.

Correct Answer: ADSection: EExplanation


QUESTION 96Scenario: An administrator must profile a company´s HRM application and Adobe Acrobat to separate profiles.The administrator also needs to publish the HRM application and Adobe Acrobat in a manner that allows theHRM application to open the company´s policy and guideline document for reference through the HRMapplication.

Which action must the administrator take to accomplish this ?

A. Publish the HRM application as a streamed application and select "Accessed from server"B. Publish the HRM application and Adobe Acrobat as streamed applications and select "Accessed from

server."C. Create an inter-isolation link between the HRM application .PROFILE file and the Adobe Acrobat .PROFILE

file with the streaming application profiler.D. Publish Acrobat as streamed applications. Make sure that the users using the HRM application have

sufficient rights to use the published streamed Adobe Acrobat



QUESTION 97Scenario: An administrator deployed a new accounting application that uses a ACC

"Pass Any Exam. Any Time." - 100% Pass Guarantee 45Citrix 1Y0-A18 Examextension for its data files on all servers running XenApp. The .ACC extension does NOT show as a file typeassociation option when attempting to publish the application.

Why is the file extension .ACC NOT listed as a file type association when trying to publish this application ?

A. The administrator must profile the application for streaming.B. The file type association function is not supported for that extension.C. The administrator has not run the "Update from registry" option from the Delivery Services Console.

D. The administrator is attempting to publish the application to a XenApp server that does not have theapplication installed.



QUESTION 98An Administrator wants users to be able to open local files using a published application.

What must the administrator do to enable this functionality ?

A. Enable folder redirection.B. Specify file type associations.C. Add shortcuts to the client device.D. Configure Advanced Access Control settings.

Correct Answer: BSection: EExplanation


QUESTION 99Scenario: An administrator of an XenApp farm needs to configure a profile solution for all users. No Customuser information should be retained anywhere.

which profile type must an Administrator configure to attain the required results ?

A. LocalB. RoamingC. StreamingD. Mandatory




QUESTION 100Scenario: An administrator suspects the XenApp farm is experiencing latency. He wants to measure theaverage client latency during the connection with XenApp server.

Which performance counter should the administrator use to monitor this ?

A. ICA SessionB. Citrix IMA NetworkingC. Secure Ticket Authority

D. Citrix Metaframe Presentation Server



QUESTION 101Scenario: A server has a custom load evaluator assigned that prevents client devices within a certain IPaddress range from the accessing the resources on the server. An Administrator needs to monitor the numberof active ICA Sessions connecting to the applications on the server and ensure that a full load is reported whenthe number of sessions on the server reaches 90. Which method should the administrator use to configure aload evaluator that needs this scenario ?

A. Add a custom load evaluator to the serverB. Modify the existing load evaluator on the server.C. Add a custom load evaluator to the applications.D. Add the Advanced load evaluator to the application.

Correct Answer: BSection: FExplanation


QUESTION 102Scenario: A Company has published a resource-intensive application and a few other minor applications in aload managed group of servers in the farm.

"Pass Any Exam. Any Time." - 100% Pass Guarantee 47Citrix 1Y0-A18 ExamTesting has revealed that each server in the load managed group can run as many as three instances of theresource-intensive application (active and disconnected), regardless of the number of sessions running in theminor applications.

What are two ways the administrator can ensure that the resorce.intensive application will only be started on aserver when two or fewer instances of the application are running ? (Choose two)

A. Configure the Server User load rule to 3 in a custom load evaluator and apply it to the resource- intensiveapplication.

B. Configure the Application User Load rule to 3 in a custom load evaluator and apply it to the resource-intensive application.

C. Configure the Server User Load rule to 3 in a custom load evaluator and apply it to the servers in the loadmanaged group.

D. Configure the CPU Utilization and Memory Usage rules to 33% in a custom load evaluator and apply it tothe servers in the load managed group.

Correct Answer: ADSection: FExplanation


QUESTION 103Scenario: There are 20 servers in a farm. Servers 1-10 have the default load evaluator attached and servers11- 20 have the advanced load evaluator attached. An administrator must ensure that the CPU utilization of allservers is monitored and a full load is reported when CPU reaches 90%. Which step must the administratortake to meet the needs of the scenario ?

A. Attach a custom load evaluator to servers 1-10.B. Attach a custom load evaluator to servers 11-20C. Attach the default load evaluator to servers 11-20D. Attach the advanced load evaluator to servers 1-10.

Correct Answer: DSection: FExplanation


QUESTION 104Scenario: A Company has six servers in the farm, with two worker groups. The administrator wants to useWorker Group 1 for user connections and reserve Worker Group 2 for fallback. What must the Administrator doto archive this configuration ?


A. Add all servers to each worker group and prioritize them.B. Add Worker Group 1 to the Worker Group preference list and prioritize it.C. Add each server to a separate worker group and prioritize the worker group.D. Add all worker groups to the Worker group preference list and prioritize them.



QUESTION 105Scenario: A Company has nine servers in the farm. The administrator has configured three worker groups:

WG1, WG2 and WG3.

By design, user connections should be directed to WG1 first, WG2 second and WG3 last. During testing, userconnections were never directed to WG3 when all WG1 and WG2 servers were down. What must theadministrator do to correct the issue ?

A. Ensure WG3 has the highest priority.B. Add WG3 to the Worker group preference list.C. Create a separate load balancing policy for WG3.D. Disable the load balancing policy for WG1 and WG2.



QUESTION 106Scenario: An Administrator is configuring printing in a new environment. All the printers are connected to thenetwork, and can be accessed as shared resources. The administrator needs to implement a printing policythat will allow print jobs to go from the XenApp server to the print server. Which two policies does theadministrator need configure to meet the requirements ? (Choose two)

A. Session PrintersB. Universal PrintingC. Client printer namesD. Direct connections to print servers




QUESTION 107Under which two circumstances would an administrator create a printer driver mapping policy ? (Choose two)

A. To identify the allowed printer driversB. To make a printer available while disconnectedC. To redirect the printing profile to the client deviceD. To replace a specific driver with a universal driver



QUESTION 108How can an administrator remove or edit driver names in the compatibility list ?

A. Use a Citrix PolicyB. Use the WTSUPRN.INF fileC. Use Windows Print ManagementD. Use the ICA Client Printer Configuration tool

Correct Answer: ASection: FExplanation


QUESTION 109Users from a multinational company are complaining that printing large jobs takes too much time. Which

printing policy setting needs to be configured to reduce the time it takes to print large jobs ?

A. Auto-create client printersB. Printer properties retensionC. Wait for printers to be createdD. Direct connections to prnt servers



"Pass Any Exam. Any Time." - 100% Pass Guarantee 50Citrix 1Y0-A18 ExamReference:http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-print-job-routing- network-configuring.html

QUESTION 110Which is a requirement for using the universal printer driver ?

A. Online plug-inB. Citrix ReceiverC. Internet ExplorerD. Network print server



QUESTION 111Scenario: An architect upgraded the Secure Gateway remote access solution to an Access Gateway solution.during the upgrade the Web Interface server has been moved from the DMZ to the internal network.

What are the advantages of locating the Web interface server in the internal network ?

A. Since the Web Interface authenticates the traffic, authentication traffic reaches the secure internet network.B. Since the Access Gateway authenticates the traffic, no authentication traffic reaches the secure internal

network.C. Since IIS is located in the internal network, this is more secure; a second Web Interface instance can be

easily implemented for internal users.D. Since IIS is located in the internal network, this is more secure; only one Web Interface instance is required

for both internal an external users.


Explanation/Reference:Reference:Citrix course book CXA-204-21 on page 419

Note:If the question had stated that the web server was moved to the DMZ the option A would have been

correct.


QUESTION 112An administrator can use the __________ option in the Web interface Management Console to specify backupURLs for a __________ site.

(Choose two)

A. XenApp webB. Secure AccessC. Server SettingsD. XenApp Services

Correct Answer: CDSection: FExplanation


QUESTION 113Which two authentication methods require a trust relationship between the Web Interface server and theXenApp Servers ? (Choose two)

A. Explicit authenticationB. Smart card authenticationC. Anonymus authenticationD. Pass-through authentication

Correct Answer: BDSection: FExplanation


QUESTION 114Which is the default port used by the Web Interface to communication with a XenApp Server ?

A. 80B. 443C. 1494D. 8080




QUESTION 115An administrator wants to allow users to connect to XenApp applications using their mobile device over theinternet, without compromising security.

Which two steps should be performed to fully secure access to the mobile devices over the Internet ? (Choosetwo)

A. A secure Access Gateway server needs to be installed.B. An SSL certificate needs to be installed on the mobile devices.C. An SSL certificate needs to be installed on the Access Gateway.D. Pass-through needs to be enabled for the authentication method.

Correct Answer: BCSection: FExplanation


QUESTION 116Scenario: A users XenApp session is in an unresponsive state. The administrator attempted logging the userout using the Delivery Services Console.

However, there is still an unresponsive process running inside the users session preventing the user fromcompletely logging out.

What can the administrator do to resolve the issue and fully log off the user, without impacting other users inthe server ?

A. Reboot the server.B. Terminate the remaining process using Delivery Services Console.C. Restart the IMA service then log the user off using the Delivery Services Console.D. Restart the Remote Desktop Services service then log the user off using Task Manager.



QUESTION 117A user is logged on to a XenApp Server. The user is trying to print from the published application. No printersare available in this session.

What could prevent printers from auto-creating ?


A. The IMA service is stopped.B. The Print spooler is stopped.C. Network issues prevent access.D. Rights to the printer were removed.



QUESTION 118Scenario: Using a custom load evaluator that utilizes only the Server User load with a modified setting changedto 200, an administrator wants to use the qfarm /load command to see the server load value.

What is the value the administrator will see displayed for a server with 17 users with active connections andone disconnected session ?

A. 850B. 900C. 1700D. 1800


Explanation/Reference:Explanation:Disconnected sessions DO count towards load evaluation for the user count on Xenapp 6 The correct formulato calculate this is:

10000 / 200 * (17+1)

We have checked this in the test environment we have and reported 900 load.

QUESTION 119Scenario: A previous administrator implemented proximity printing based on specific printers assigned to userIDs.

Users are complaining that they are unable to print to the closest printer when they move to different locations.What does the new administrator need to implement to configure proximity printing to meet the needs of theusers ?


A. Citrix UPDB. Client printingC. Session printingD. Citrix Universal Printer

Correct Answer: CSection: FExplanation


QUESTION 120Scenario. The IMA Service on a server failed to notice an update due to network problems.

As a result the local host cache is out of date.

Which command can the Administrator issue to force the local host cache to read all changes immediately fromthe data store ?

A. dsmaintB. dscheckC. query farmD. query session


Explanation/Reference:Explanation: The LHC dsmaint /recreatelhc will rebuild the Local Host Cache.Incorrect answer:

Dscheck utility performs validation checks on a server farm's data store.

QUESTION 121Scenario: Some users complain that they are unable to access printers in their XenApp session. As part oftroubleshooting the issue, the administrator plans to check the security setup. Where would the administratorcheck to ensure security is configured correctly ?

A. Users ProfileB. Local user workstationC. %systemroot%\system32\tempD. %systemroot%\system32\spool folder

Correct Answer: DSection: GExplanation


Explanation:

QUESTION 122Scenario: A user attempts to log on using the Web Interface, however the pass-through authentication failsalter known good credentials are entered from a windows client device. The message reads "An Authenticationerror has occurred with Web Interface in Windows Server 2008". The explicit logon works correctly with noissues and the administrator determines that the Windows Server 2008 has NOT been configured correctly.

which action should the administrator take to resolve the issue ?

A. Restart the IIS service.B. Modify the XML Service port.C. Add the user to the administrators group.D. Modify the server role using Server Manager.

Correct Answer: DSection: GExplanation


QUESTION 123Which two types of Web Interface sites can an administrator create? (Choose two.)

A. XenApp WebB. XenApp Plug-inC. XenApp ServicesD. XenApp Advanced Configuration

Correct Answer: ACSection: GExplanation


QUESTION 124Which three protocols can be used to transport Web Interface data between the web server and XenAppservers? (Choose three.)

A. HTTPB. HTTPSC. IPX/SPX


D. SSL Relay

Correct Answer: ABDSection: GExplanation


QUESTION 125What are two types of content redirection? (Choose two.)

A. Client-to-serverB. Server-to-clientC. Client-to-contentD. Application-to-serverE. Content-to-application

Correct Answer: ABSection: GExplanation


QUESTION 126Which two statements about session sharing are true? (Choose two.)

A. Session sharing does not take precedence over load balancing settings.B. All applications in a shared session must be published with the same settings.C. Session sharing is a mode in which more than one hosted application runs on a single connection.D. Session sharing is a mode in which more than one user can access the same hosted application in a

singlesession.

Correct Answer: BCSection: GExplanation


QUESTION 127Which two statements regarding the Citrix offline plug-in are accurate? (Choose two.)

A. The offline plug-in is invisible to the user.B. The offline plug-in runs as a service on the client device.C. The offline plug-in determines the application delivery mode.D. The offline plug-in is displayed in the Windows notification area.E. The offline plug-in can be used in conjunction with a XenApp Web site to access applications "Pass Any

Exam. Any Time." - 100% Pass Guarantee 57Citrix 1Y0-A18 Examoffline.

Correct Answer: ABSection: GExplanation


QUESTION 128A profile creates a target based on which four criteria? (Choose four.)

A. ApplicationsB. Operating systemC. Service Pack levelD. System drive letterE. Operating system languageF. Files, folders and registry settings

Correct Answer: BCDESection: GExplanation


QUESTION 129Citrix policies can be created using which three management tools? (Choose three.)

A. Delivery Services ConsoleB. Terminal Services ManagerC. Advanced Configuration Console

D. Advanced Group Policy ManagerE. Group Policy Management Console

Correct Answer: ADESection: GExplanation


QUESTION 130An administrator can attach load evaluators to which two components in a server farm? (Choose two.)

A. UsersB. ServersC. GroupsD. Published applications


Correct Answer: BDSection: GExplanation


QUESTION 131An administrator can create a custom load evaluator using which two methods? (Choose two.)

A. By using the Load Manager MonitorB. By duplicating an existing load evaluatorC. By using the New > Add Load Evaluator menu optionD. By altering the rules in either the Default or Advanced load evaluator



QUESTION 132Which three statements about HDX 3D Image Acceleration are correct? (Choose three.)

A. HDX 3D Image Acceleration works best with medical imaging.B. HDX 3D Image Acceleration can be enabled using a Citrix policy.C. HDX 3D Image Acceleration removes redundant data from an image file.D. HDX 3D Progressive Display works in conjunction with HDX 3D Image Acceleration.E. HDX 3D Image Acceleration provides a high image quality when the compression level is set to

highcompression.

Correct Answer: BCDSection: GExplanation


QUESTION 133Which three statements are true concerning Session Reliability? (Choose three.)

A. HDX Broadcast Session Reliability reconnects the user without the loss of data.B. HDX Broadcast Session Reliability resets the user connection upon session interruption.C. HDX Broadcast Session Reliability reconnects the user without requiring re-authentication.D. HDX Broadcast Session Reliability tunnels the ICA traffic through the Common Gateway Protocol (CGP) on

port 1494.E. HDX Broadcast Session Reliability tunnels the ICA traffic through the Common Gateway Protocol (CGP) on

"Pass Any Exam. Any Time." - 100% Pass Guarantee 59Citrix 1Y0-A18 Examport 2598.

Correct Answer: ACESection: GExplanation


QUESTION 134Printer bandwidth limitations can be set using which two methods? (Choose two.)

A. Worker group propertiesB. Published application propertiesC. Policies in the Delivery Services ConsoleD. Citrix Policies in Group Policy Management Console

Correct Answer: CDSection: GExplanation


QUESTION 135Which two deployment scenarios are valid for Access Gateway and XenApp? (Choose two.)

A. Access Gateway in the DMZ, Web Interface in the DMZB. Access Gateway in the DMZ, Secure Ticket Authority in the DMZC. Access Gateway in the DMZ, Web Interface in the internal networkD. Access Gateway in the secure network, Web Interface in the DMZE. Access Gateway in the secure network, Secure Ticket Authority in the DMZ

Correct Answer: ACSection: GExplanation


QUESTION 136When health monitoring and recovery is configured for a server, which three actions can be configured to takeplace automatically? (Choose three.)

A. Restart the Citrix IMA Service.B. Restart the Citrix XML Service.C. Shut down the Citrix IMA Service.D. Send alerts to the Event Log of the server.E. Send a message to the data store database.


Correct Answer: ACDSection: GExplanation


QUESTION 137Which three components are included in XenApp? (Choose three.)

A. EdgeSightB. NetScalerC. XenDesktopD. SmartAuditorE. Single sign-on

Correct Answer: ADESection: GExplanation


QUESTION 138What are two benefits of SmartAuditor? (Choose two.)

A. Administrators can monitor sessions to aid in the compliance of regulatory policies.B. Administrators can configure a Security Module to protect the data store database.C. Administrators can configure policies to control which applications client devices can access.D. Administrators can specify recording options based on the user, application or the XenApp server that

isaccessed.

Correct Answer: BDSection: GExplanation


QUESTION 139Which two application types can be configured in a Web Interface site so that applications stream to thedesktop of a client device? (Choose two.)

A. OnlineB. OfflineC. Dual modeD. Streamed to clientE. Streamed to server




QUESTION 140Which two events do not trigger a policy update evaluation? (Choose two.)

A. A user logs onB. The server is rebootedC. An OU trust is createdD. A policy update is forcedE. A print server is importedF. The policy refresh interval is reached

Correct Answer: CESection: GExplanation


QUESTION 141An administrator wants to know the server load for a server named CTXXAO1 .

Which two commands can an administrator use from any Citrix server in the farm to get the proper results?

(Choose two.)

A. qfarm /IoadB. query farm CTXXA01 /IoadC. query user /server: CTXXAO 1D. query session /server: CTXXAO 1

Correct Answer: ABSection: HExplanation


QUESTION 142The Client for Java should be used in which two situations? (Choose two.)

A. A web browser does not exist on the client device.

B. Permanent installation of plug-in software is desired.C. Permanent installation of plug-in software is not permitted.D. A Java-compatible web browser exists on the client device.


Correct Answer: CDSection: HExplanation


QUESTION 143Which two critical security capabilities is SecureICA not designed to do? (Choose two.)

A. It does not authenticate the XenApp server that the client accesses with SSL certificates.B. It does not encrypt session data sent between the client and the XenApp server.C. It does not authenticate the user that is requesting access to the XenApp server.D. It does not encrypt user authentication credentials sent between the client and theXenApp server.

Correct Answer: ADSection: HExplanation


QUESTION 144Which statement about EasyCall voice services is true?

A. It is a virtual appliance that allows users to access applications using any phoneB. It is a virtual appliance that enables users to place calls from business applicationsC. It is a virtual appliance that verifies the password of a user accessing a business applicationD. It is a virtual appliance that speeds up communication channels and replaces the PBX in an organization

Correct Answer: BSection: HExplanation


QUESTION 145How can an administrator remove or edit driver names in the compatibilty list ?

A. Use a Citrix PolicyB. Use the WTSUPRN.INF fileC. Use Windows Print ManagementD. Use the ICA Client Printer Configuration tool

Correct Answer: ASection: HExplanation



QUESTION 146Scenario: Using a custom load evaluator that utilizies only the Server User load with a modified setting changedto 200, an administrator wants to use the qfarm /load command to see the server load value.

What is the value the administrtor will see displayed for a server with 17 users with active connections and onedisconnected session?

A. 850B. 900C. 1700D. 1800



QUESTION 147Which statement about worker groups is true?

A. The first XenApp server moved into a worker group becomes the zone data collector.B. Farm servers in a worker group with a priority setting of 3 are considered the highest priority.C. A farm server added to a worker group will automatically inherit the policy configurations for the

workergroup.D. A farm server added to a worker group does not need to have an application installed locally to be able

toinherit the published application configurations of the worker group and host the application.

Correct Answer: CSection: HExplanation


QUESTION 148A server to which the Advanced load evaluator is assigned is dropped from the internal list of available serverswhen which event occurs?

A. When all the rules in the Advanced load evaluator meet their set thresholdsB. When one of the rules in the Advanced load evaluator meets its set thresholdC. When all the rules in the Advanced load evaluator exceed their set thresholdsD. When one of the rules in the Advanced load evaluator exceeds its set threshold




Explanation:

QUESTION 149Scenario: A XenApp farm is located in a datacenter in New York. A request has been made to add a XenAppserver in London. The WAN network connection is stable enough to allow the new server to exist in the NewYork farm.

What should be done by the administrator to ensure that the least amount of Citrix IMA traffic traverses theWAN?

A. The administrator needs to create a new zone and add the new server to that zone, making it the zonedatacollector

B. The administrator does not need to create a new zone because Citrix IMA traffic will only originate fromthedata collector.

C. The administrator does not need to create a new zone if "Not Preferred" is specified as theelectionpreference for the new server.

D. The administrator does not need to create a zone for the new server, but rather create a new farm andlinkCitrix IMA traffic in the Delivery Center.



QUESTION 150What should an administrator do to obtain a license file?

A. Call Citrix Technical SupportB. Copy a file from a previous XenApp implementationC. Log on to the MyCitrix web site using personalized credentialsD. Run the License Generation Wizard from the Delivery Services Console



QUESTION 151Which item is not available as a role in the XenApp Server Role Manager?

A. Data collectorB. XenApp server


C. Web Interface serverD. Provisioning services

Correct Answer: ASection: H

Explanation


QUESTION 152Complete the following sentence. When configuring XenApp, to use an existing license server, administratorsenter the license server name or __________.

A. IP addressB. license keyC. MAC addressD. administrator credentials



QUESTION 153Which privileges can be granted to a XenApp administrator account?

A. Full, View Only, GuestB. Read Only, Write Only, Add/UpdateC. View Only, Full Administration, CustomD. Create Accounts, Delete Accounts, Update Accounts



QUESTION 154Which statement about folders in the Delivery Services Console is true?

A. All administrators can create folders.B. Permissions can be assigned to individual applications in folders.C. Folders can be used to delegate the administration of applications and servers.D. Changes to permissions on a parent folder are automatically copied to all subfolders.



Explanation:

QUESTION 155If IMA encryption is enabled, which effect will it have on the Configuration Logging database?

A. All data in the Configuration Logging database will be backed up.B. Credentials to the Configuration Logging database will be encrypted.C. Only an Oracle database can be used for the Configuration Logging database.D. Only a SQL Server database can be used for the Configuration Logging database.



QUESTION 156Which authentication method is not recommended in secure environments?

A. Smart cardB. AnonymousC. Single sign-onD. Novell Directory Services



QUESTION 157Which statement is true when using network address translation in a Web Interface deployment?

A. The alternate IP address of a XenApp server is included in the client filesB. The alternate IP address of a Secure Gateway server is included in client files.C. The ALTADDR command is used to change the IP address of the Web Interface server.D. The internal IP address of a XenApp server is mapped to the external IP address of the Web Interface

server.



QUESTION 158"Pass Any Exam. Any Time." - 100% Pass Guarantee 67Citrix 1Y0-A18 ExamWhen the Citrix online plug-in is used to access published applications, which statement is correct?

A. A XenApp Web site is required.B. A XenApp Services site is required.C. Pass-through authentication cannot be used.D. A web browser is used to communicate with the Web Interface site.

Correct Answer: B

Section: HExplanation


QUESTION 159An administrator can manage published content using which node in the Delivery Services Console?

A. ContentB. ApplicationsC. Published ResourcesD. Installation Manager



QUESTION 160When an application set contains a large number of published applications, server desktops and content, howcan an administrator effectively organize the resources for users?

A. Use load-managed groups.B. Use the Resource Manager.C. Create client application folders.D. Create application folders in the console.



QUESTION 161An administrator can configure the importance level of a published application using which option in theproperties of the application?


A. TypeB. LimitsC. Client optionsD. Access control

Correct Answer: BSection: IExplanation


QUESTION 162Which statement is true about published resource properties?

A. Published resource properties cannot be modified.B. Published resource properties can be modified at any time.C. Published resource properties can be modified only when the resource is disabled.D. Published resource properties cannot be modified when users are using the resource.



QUESTION 163In addition to the standard server farm components of XenApp 6, which Citrix component is needed forapplication streaming to a desktop?

A. Citrix ReceiverB. Citrix online plug-inC. Citrix offline plug-inD. Citrix Access Gateway

Correct Answer: CSection: IExplanation


QUESTION 164An administrator is creating a profile for an application and wants to include a specific Internet Explorer plug-in.

Which type of installation should the administrator use?

A. Quick"Pass Any Exam. Any Time." - 100% Pass Guarantee 69Citrix 1Y0-A18 Exam

B. DefaultC. StandardD. AdvancedE. Integrated

Correct Answer: DSection: IExplanation


QUESTION 165An administrator must publish which file type to make a streaming application available to users?

A. .EXE

B. .MSIC. .RADD. .PROFILE



QUESTION 166When an existing Citrix user policy is changed, how long does the previous policy remain in effect?

A. For the length of the sessionB. Until the user profile is changedC. Until the user disables the policyD. Until the user is moved to another group

Correct Answer: ASection: IExplanation


QUESTION 167Which filter is not valid for use with policies in XenApp?

A. ServersB. Worker groupsC. Client device nameD. User and user groups




QUESTION 168Select the correct order in which policies are processed and applied.

A. Domain GPOs, Local GPOs, IMA-based policies, OU GPOs, Site GPOsB. IMA-based policies, OU GPOs, Local GPOs, Site GPOs, Domain GPOsC. Local GPOs, IMA-based policies, Site GPOs, Domain GPOs, OU GPOsD. OU GPOs, Local GPOs, IMA-based policies, Site GPOs, Domain GPOsE. Site GPOs, Domain GPOs, Local GPOs, OU GPOs, IMA-based policies



QUESTION 169The Advanced load evaluator is based on which rules?

A. CPU Utilization, Load Throttling, Memory Usage and Page SwapB. Load Throttling, Memory Usage, Page Swap and Server User LoadC. CPU Utilization, Load Throttling, Page Swap and Server User LoadD. CPU Utilization, Load Throttling, Memory Usage and Server User Load



QUESTION 170An administrator can adjust load evaluator properties ____________. (Fill in the blank with the correct answer.)

A. At any timeB. At the time of creation onlyC. For the Advanced load evaluator onlyD. Only when the load evaluator is not being used




QUESTION 171If a client device is connected to XenApp server over a slow connection and the user is experiencing delayedmouse clicks and keyboard response, which type of session optimization technology should be implemented toaddress this issue?

A. HDX RealTimeB. HDX MediaStream for FlashC. SpeedScreen Latency ReductionD. HDX MediaStream Multimedia Acceleration



QUESTION 172An administrator should publish __________ and enable __________ for users who need to watch videos and

require high quality.

A. Firefox, HDX 3D Image AccelerationB. QuickTime, HDX MediaStream for FlashC. Outlook, SpeedScreen Latency ReductionD. RealOne Player, HDX MediaStream Multimedia Acceleration



QUESTION 173Which statement about HDX MediaStream for Flash is true?

A. It auto-creates printers after the Flash Player launches.B. It auto-creates printers before the Flash Player launches.C. It forces the Flash Player to start in a high-quality mode instead of the default low-quality mode.D. It forces the Flash Player to start in a low-quality mode instead of the default high-quality mode.



QUESTION 174Which plug-in provides a self-service storefront for enterprise resources to users?


A. DazzleB. Online plug-inC. Offline plug-inD. Communications plug-in



QUESTION 175From which component does the Merchandising Server obtain new plug-ins to distribute to client devices?

A. XenApp farmB. Citrix ReceiverC. The Web InterfaceD. Citrix Update Service



QUESTION 176Which component manages plug-ins on a client device, allowing IT to deliver applications and desktops as anon-demand service?

A. DazzleB. Citrix ReceiverC. Web InterfaceD. Merchandising Server



QUESTION 177Which type of printer is accessed as a shared resource and connected to the network by means of a printserver?

A. Network printerB. Client local printer


C. Server local printerD. Client network printer



QUESTION 178Which statement concerning printing in a XenApp environment is true?

A. Auto-created network printers are identified only by their printer name.B. Printer properties can be stored on the client device or in the user profile.C. Auto-created client local printers are identified only by their printer name.D. By default, only the default client printer is automatically created during logon.



QUESTION 179Which statement is NOT a benefit of implementing the Universal printing policy rule?

A. It limits which printers users can access.B. It reduces printer driver maintenance issues.C. It ensures that client printers are auto-created regardless of printer driver availability on the server.D. It reduces the size of some print jobs and reduces delays when print jobs are spooled over

slowconnections.



QUESTION 180Which printer drivers are installed by default on a XenApp server?

A. No printer driversB. HP printer driversC. Universal printer driversD. Those designated during installation




QUESTION 181Which component is not required for Access Gateway integration with Web Interface?

A. A failover virtual serverB. A FQDN that Web Interface can resolveC. An SSL certificate that Web Interface trustsD. An Access Gateway server that Web Interface can access



QUESTION 182At which interval is data collected and stored in the local Firebird database on a XenApp EdgeSight agent?

A. 1 hourB. 5 minutesC. 5 secondsD. 20 minutes

E. 15 seconds

Correct Answer: ESection: IExplanation


QUESTION 183An administrator wants users to be able to access applications installed on the XenApp server through theonline plug-in and access streaming applications when the users are offline. What must the administratorconfigure?

A. One XenApp Web siteB. One XenApp Services siteC. One XenApp Web site and one XenApp Services siteD. Two XenApp Web sites and two XenApp Services sites



Explanation:

QUESTION 184The Default load evaluator is based on which rules?

A. Page Faults, Load ThrottlingB. Context Switch, Load ThrottlingC. Disk Operations, Load ThrottlingD. Server User Load, Load Throttling



QUESTION 185Which feature allows users to disconnect and reconnect to ICA sessions as they move between client devices?

A. Workspace controlB. Explicit authenticationC. Pass-through authenticationD. Pass-through with smart card authentication



QUESTION 186Complete the following sentence. If pass-through authentication is not enabled during the installation and islater desired on the server, the plug-in software __________.

A. cannot be configured to use pass-through authenticationB. automatically configures upon reboot for pass-through authenticationC. must be reinstalled on the server before pass-through authentication can be usedD. can be copied from another XenApp environment that contains pass-through authentication




QUESTION 187For which purpose can Provisioning Services be used?

A. Secure ICA trafficB. Host virtual machinesC. Provision physical and virtual desktopsD. Automate business and IT processes


Explanation/Reference:"Pass Any Exam. Any Time." - 100% Pass Guarantee 77


citrix 1y0-a18 ak - gratis exam number ... which port is used for communication between the citrix...

Documents