cisco 300-101 route ccnp braindumps

300-101 ROUTEImplementing Cisco IP Routing

TRAINING & Classes

Online

CURRENT EXAMS

Info

TRAINING & EVENTS

http://www.testinsides.com/300-101.html


EXAM INFORMATION

Exam 300-101 Description

Implementing Cisco IP Routing (ROUTE 300-101) is aqualifying exam for the Cisco CCNP Routing andSwitching and CCDP certifications. The ROUTE 300-101 examcertifies the routing knowledge and skills of successfulcandidates. They are certified in using advanced IPaddressing and routing in implementing scalable andhighly secure Cisco routers that are connected to LANs,WANs, and IPv6.



CISCO CCNP ROUTING/SWITCHING 300-101 ROUTEThis Cisco video training course with Jeremy Cioara covers thematerial needed for the 300-101 Cisco ROUTE exam with real-worldexperience and gobs of technical content packed together in one.Practice makes perfect, right? Especially hands-on practice. We highlyrecommend applying the knowledge you’ve learned in this course bywatching Keith Barker’s “Cisco CCNP Route 300-101 Hands-on LabsExam Prep ” course!

Recommended skills:

Basic understanding of concepts taught in ICND1/ICND2

Recommended equipment:

GNS3 v1.x

Cisco IOS image (12.x or 15x) supported by GNS3

Optional: Cisco VIRL, live gear (three 2621XM routers are ideal) orsimulators/emulators supporting the technology in the lab may beused instead of GNS3 v1.x.

Related certifications:

Cisco CCNP Routing and Switching

Cisco CCIE Routing and Switching

Related job functions:

Network technician

Network engineer



CISCO ROUTE CHANGING WITH NEW TECHNOLOGIES

The worldwide network landscape is continuallychanging with new technologies being introducedcontinually. The new revision of the Cisco ROUTE exam isthe most information packed addition to the CCNPcurriculum experienced to date! By the time you're donewatching, you'll be ready to configure routing protocolsat a master level; grasp the big-picture of worldwideCisco network design; fill in plenty of “knowledge gaps”left by the CCNA on routing protocols; and confidently sitfor the 300-101 exam.



CISCO LEARNING NETWORK

Welcome to The Cisco Learning Network


Jump-start your use of the Cisco Learning Network's

dynamic features and vibrant community offerings. Here

you will find technical information and professional

networking opportunities, which will help advance your

certification goals. By joining the Cisco Learning Network

you will:

Be a part of the Community

Join the Community

Start Your Certification Journey

Explore Certification Paths

Stay Connected

Prepare for Success

View Exam Topics

Access Study Material

IT Training Videos and Seminars

Premium Learning

Interact with Professionals

Join or Start a Discussion

Join a Study Group

View and Attend a Virtual Event

Mentor, Share and Grow

Career Resources

Member Led Study Sessions


LEARNING PRODUCT PROMOTIONS



RECOMMENDED STUDY RESOURCES

For self-study, the CCNP Routing and Switching ROUTE 300-101Official Cert Guide book is your best resource. This Cisco Pressbook covers all non-CCNA topics on the ROUTE examblueprint, and it identifies which topics to study from yourCCNA materials. The book also challenges you with quizzes,practice questions on a CD-ROM, identification of key topics,and memory tables.

The CCNP Routing and Switching ROUTE 300-101 CompleteVideo Course is a collection of approximately 150 videos witha total run time of approximately 15 hours, covering all non-CCNA topics from the ROUTE exam blueprint. Also, thiscomplete video course contains Glossary Quizzes, ModuleQuizzes, and Interactive Exercises (including drag-and-dropscenarios and simulation-style questions that challenge you toperform router configuration).

The CCNA Routing and Switching 200-120 NetworkSimulator contains nearly 400 lab scenarios that can benefityou in your ROUTE and SWITCH studies, in addition to yourCCNA studies.

Because many of the topics on the ROUTE exam blueprint arecovered at the CCNA level, you might want to invest in currentCCNA study resources. Recommended resources include CCNARouting and Switching 200-120 Official Cert GuideLibrary and CCNA 200-120 Complete Video Course.



CCNP R&S 2.0 EXAM CHANGES

It is clear from the changes that Cisco is interested inkeeping the CCNP R&S blueprint current withchanging trends in modern networks. The inclusion ofpopular VPN architectures as well as in increasedfocus on IPv6 are two examples. Topics like CiscoStackwise introduce practical technologies thatnetwork engineers interact with on a day-to-daybasis that were previously ignored. While the newupdates will come as a concern to some, Cisco isdoing the right thing by keeping the technical topicsupdated with current operational trends and designs.This helps protect the value of the CCNP certificationfor current and aspiring network professionals.



SHARE YOUR ROUTE V2.0 EXPERIENCE

The ROUTE 300-101 (ROUTE v2.0) exam has been usedto replace the old ROUTE 642-902 exam so this articleis devoted for candidates who took this examsharing their experience. Please tell with us whatare your materials, the way you learned, yourfeeling and experience after taking the ROUTE v2.0exam…



BEST IT EXAM STUDY MATERIALS

As a professional IT exam study materialprovider, Testinsides.com gives you morethan just exam questions and answers. Weprovide our customers with the mostaccurate study material about the examand the guarantee of pass. We assist youto prepare for almost all the maincertifications which are regarded valuablethe IT sector. You can easily find all kinds ofIT exam Q&As on our site.



CISCO 300-101 PRACTICE TEST

Which two actions must you perform to enable and use window scaling on a router?

(Choose two.)

A. Execute the command ip tcp window-size 65536.

B. Set window scaling to be used on the remote host.

C. Execute the command ip tcp queuemax.

D. Set TCP options to "enabled" on the remote host.

E. Execute the command ip tcp adjust-mss.


Topic 1, Network Principles

Question No : 1 -

(Topic 1)

Answer :

Execute the command ip tcp window-size 65536.Set window scaling to be used on the remote host.


Which switching method is used when entries are present in the output of the command show ip cache?

A. fast switching

B. process switching

C. Cisco Express Forwarding switching

D. cut-through packet switching


Question No : 2 -

(Topic 1)

Answer :


fast switching


Under which condition does UDP dominance occur?

A. when TCP traffic is in the same class as UDP

B. when UDP flows are assigned a lower priority queue

C. when WRED is enabled

D. when ACLs are in place to block TCP traffic



Question No : 3 -

(Topic 1)

Answer :

when TCP traffic is in the same class as UDP


A network administrator executes the command clear iproute. Which two tables does this command clear and rebuild? (Choose two.)

A. IP routing

B. FIB

C. ARP cache

D. MAC address table

E. Cisco Express Forwarding table

F. topology table



Question No : 4 -

(Topic 1)

Answer :

IP routingFIB


Scenario:

You have been asked to evaluate an OSPF network setup in a test lab and to answer questions a customer has about its operation. The customer has disabled your access to the show running-configcommand.


Topic 3, Layer 3 Technologies

Question No : 5 -

(Topic 3)




Question No : 5 -

(Topic 3)



How old is the Type 4 LSA from Router 3 for area 1 on

the router R5 based on the output you have

examined?

A. 1858

B. 1601

C. 600

D. 1569


Question No : 5 -

(Topic 3)

Answer :

1858



A network engineer executes the show crypto ipsec sacommand. Which three pieces of information are displayed in the output? (Choose three.)

A. inbound crypto map

B. remaining key lifetime

C. path MTU

D. tagged packets

E. untagged packets

F. invalid identity packets

Topic 4, VPN Technologies



Question No : 6 -

(Topic 4)

Answer :

inbound crypto mapremaining key lifetimepath MTU


A network engineer is asked to configure a "site-to-site"IPsec VPN tunnel. One of the last things that the engineerdoes is to configure an access list (access-list 1 permit any)along with the command ip nat inside source list 1 int s0/0overload. Which functions do the two commands serve inthis scenario?

A. The command access-list 1 defines interesting traffic thatis allowed through the tunnel.

B. The command ip nat inside source list 1 int s0/0 overloaddisables "many-to-one" access for all devices on a definedsegment to share a single IP address upon exiting theexternal interface.

C. The command access-list 1 permit any defines only onemachine that is allowed through the tunnel.

D. The command ip nat inside source list 1 int s0/0 overloadprovides "many-to-one" access for all devices on adefined segment to share a single IP address upon exitingthe external interface.


Topic 6, Infrastructure Services

Question No : 7 -

(Topic 6)

Answer :

The command ip nat inside source list 1 int s0/0 overload provides

"many-to-one" access for all devices on a defined segment to

share a single IP address upon exiting the external interface.



A. Traffic from the 172.16.0.0/16 network will be blocked by the ACL.

B. The 10.0.0.0/8 network will not be advertised by Router B because the network statement for the 10.0.0.0/8 network is missing from Router B.

C. The 10.0.0.0/8 network will not be in the routing table on Router B.

D. Users on the 10.0.0.0/8 network can successfully ping users on the 192.168.5.0/24 network, but users on the 192.168.5.0/24 cannot successfully ping users on the 10.0.0.0/8 network.

E. Router B will not advertise the 10.0.0.0/8 network because it is blocked by the ACL.

CISCO 300-101 PRACTICE TESThttp://www.testinsides.com/300-101.html

Topic 7, Mix Questions

Question No : 8 -

(Topic 7)

Refer to the exhibit. Which statement is true?

Answer :Router B will not advertise the 10.0.0.0/8 network because it is blocked by the ACL.


A router receives a routing advertisement for the same prefix and subnet from four different routing protocols. Which advertisement is installed in the routing table?

A. RIP

B. OSPF

C. iBGP

D. EIGRP

CISCO 300-101 PRACTICE TESTQuestion No : 9 -

(Topic 7)

Answer :

EIGRP



What is the primary service that is provided when you implement Cisco Easy Virtual Network?

A. It requires and enhances the use of VRF-Lite.

B. It reduces the need for common services separation.

C. It allows for traffic separation and improved network efficiency.

D. It introduces multi-VRF and label-prone network segmentation.

CISCO 300-101 PRACTICE TESTQuestion No : 10 -

(Topic 7)

Answer :

It allows for traffic separation and improved

network efficiency.



Test Insides Professionals are able tostructure a remarkable self testing devicethat aims to ensure your success byimparting you the best exam sense andmastery over the real exam scenario.

TEST INSIDES TESTING ENGINE FEATURES



Gain instant access to our entire IT training library for 1 week. Train anytime on your desktop, tablet, or mobile devices.

TRY OUR TRAINING MATERIAL FOR FREE BEFORE BUY



We offer you 30 days money backguarantee. Students, who got failed, evenafter struggling hard to pass the exams byusing our preparation material, are advisedto claim our money back guarantee.

30 DAYS MONEY BACK GUARANTEE



OUR TESTIMONIAL

I passed last week my 300-101 certification exam. Iwould like to thank Test Insides for the greatproduct that you have that helped in thepreparation and passing the exam. This is by farthe most comprehensive and well writtenmaterial. Thanks

“Alexandra”



BECOME CERTIFIED FROM TESTINSIDES



cisco 300-101 route ccnp braindumps

Documents