We are going to make a circuit that will make the

bulb light up.

To do this we need………

…batteries in a battery holder…

…a light bulb…

…electrical wires and crocodile clips.

The battery holder has a positive and a negative side. The batteries are not

the same way up.

Positive side

Negative side

When you have collected all of the equipment you can start to make the

circuit.

First you must connect one of the crocodile clips to one of

the battery sides

Then you need to connect the other

wire.

Now the bulb will light.

The circuit starts from the negative side of the battery holder.

The electric current runs through the light bulb…..

…and continues along the wire to the positive

side of the battery holder.

This completes the circuit.

The circuit only works when everything is

connected correctly.

Look at the next few pictures. See if you can guess whether the circuits will light up or not. Can you see what might be

wrong with them?

Will this circuit light?

This circuit will not light because the wires are not all connected.

When the wires are all connected the circuit will work.

Will this circuit light?

This circuit will light because

everything is connected properly.

This keeps the circuit working properly.

Will this circuit light?

This circuit will not light because the batteries are

facing the same way up in the battery

holder.When the batteries are the right way

round the circuit will work.

Will this circuit light?

This circuit will not light

because one of the

wires is attached to the glass

part of the light bulb. When the wire is properly

connected to the battery side the circuit will work.

Keeping everything correctly connected is the only way the circuit will work.