circo led - steon lightingsteon.com/wp-content/uploads/1970/01/circo-led-datasheet.pdf · circo led...
TRANSCRIPT
t: 01282 448666f: 01282 417703
www.lampslighting.co.uk Circo LEDUniversal Surface Ceiling LuminairesCirco LED is a stylish, yet robust, IP65 low energy
LED wall or ceiling luminaire suitable for interior or exterior use. It is available with an optional integrated Manual Intelligent Control (MIC) for enhanced energy savings. The Circo LED features an innovative integral lever for quick and easy lens removal. Circo LED is ideal for toilets, bathrooms, staircases, corridors, building facades and porches.
Features:• IP65 (dust tight & water jet proof)• IK10 (20 joule) shock resistance• Corrosion resistant• Energy efficient Osram LEDs• Low LED power consumption: 16W • Optimum single bin LEDs with a 3 MacAdam ellipse tolerance• High lumen output – superior illuminance to a 28W TC-DD compact fluorescent • Average 50,000 hours LED life – maintenance free• Wall or ceiling mounting• Lever operated lens for quick / easy maintenance• Removable gear tray• 1 x 16 / 20mm conduit entry for side wiring
Options:• Available with an integrated microwave Manual Intelligent Control (MIC) – See pages 2&3• Integral 3hr maintained emergency• LED available in two colour temperatures: – 3000K (warm) – 4000K (cool)• 10W version available on request Material:• Body: polycarbonate• Lens: polycarbonate
Finish:• Trim: white, chrome or polished brass (available on special request)• Lens: cloud
Spares:All components are available from Lamps and Lighting’s UK manufacturing facility.
The information given on these sheets is typical of the product depicted; it must not be interpreted as a guarantee of individual product performance and/or characteristics.We reserve the right to alter specifications and designs without prior notice. All measurements are in millimetres (mm).
These luminaires are designed to comply with EN 60598-1 (BS 4533:101)Emergency EN 60598.2.22 (BS 4533:102.22)
330
140
180° 150°150°
120°120°
90°90°
0° 30°30°
60°60°
cd / 1000 lmC0 / C180 C90 / C270
100
200
300
Circo LED 16W MIC System Available
Chrome Trim
Low energy efficiency
High energy efficiency
Ordering Example:
LUC 103/WH/MIC3
LUC 1 03 /WH /MIC3
Circo LED Wattage LED Colour Temperature Finish Control
E3-LUC 103/WH
E3-LUC 104/WH
E3-LUC 103/CH
E3-LUC 104/CH
White Trim
LED 16W 3000K (warm)
LED 16W 4000K (cool)
Chrome Trim
LED 16W 3000K (warm)
LED 16W 4000K (cool)
LUC 103/WH
LUC 104/WH
LUC 103/CH
LUC 104/CH
Standard
Ordering Code
Emergency
MIC Compatibility (See pages 2&3)
MIC 1
ü
ü
ü
ü
MIC 2
ü
ü
ü
ü
MIC 3
ü
ü
ü
ü
Circo LED
Equivalent CFL Type
1 x 28W
1 x 28W
1 x 28W
1 x 28W
t: 01282 448666f: 01282 417703
www.lampslighting.co.uk MICThe Manual Intelligent Control (MIC) system features a range of advanced sensor technology controls offering the ultimate in energy saving and carbon reduction. Significant energy savings can be achieved with a MIC system that dynamically manages lamp power according to the instantaneous lighting requirement. It ensures that the right level of light appears at the right place only when required, this preventing unnecessary energy consumption and potentially reducing maintenance costs. The MIC system has been installed in over 3000 BT telephone exchanges with confirmed energy savings in excess of 70%.
There are three types of Manual Intelligent Control: MIC1, MIC2 and MIC3, available as a master (sensor incorporated) or a slave (controlled by master), to suit different requirements and budgets. The manual intelligent controls are programmed manually by a dip switch to switch on and off automatically to maximise cost savings.
MIC 1
MIC 2
MIC 3
MIC 1 is a versatile and cost-effective OFF–ON–OFF energy saving control unit.
MIC 2 offers all the benefits of the MIC 1 but with a DIM–ON–DIM function. MIC 2 is an ideal control for reducing energy consumptions whilst still providing some level of illumination for extra safety.
MIC 3 is the most flexible energy saving manual control with an OFF–ON–DIM–OFF function, permitting full light management and maximum energy saving.
OFF
DIM
OFF ON DIM OFF
ON
ON
OFF
DIM
Absence – luminaires areswitched off.
Absence – luminaires areon at a courtesy preset dimmed level. Approximately 20% output and 1/3 total power.
Absence – luminaires are switched off.
Occupancy detected – luminaires illuminate at full output.
After a preset time of absence, luminaires dim to the courtesy preset dimmed level. Approximately 20% output and 1/3 total power
After continued absence over a preset time, luminaires switch off completely. If required, the ‘off’ function can be disabled to operate as a MIC 2
Occupancy detected –luminaires illuminate at full output unless there is sufficient daylight and the lux level setting overides it.
Occupancy detected –luminaires illuminate at full output.
Absence – after a preset time, luminaires switch off completely.
Absence – after a preset time of absence, luminaires return to the courtesy preset dimmed level.
Suffix LuminaireOrdering Code
Suffix LuminaireOrdering Code
Suffix LuminaireOrdering Code
Master
/MIC1
Slave
/MIC1S
Example –Circo LED 4000K with whitetrim and intergrated MIC1 master system: LUC 104/WH/MIC1
Master
/MIC2
Slave
/MIC2S
Example –Circo LED 3000K with chrome trim and intergrated MIC2 slave system:LUC 103/CH/MIC2S
Master
/MIC3
Slave
/MIC3S
Example –Circo LED 4000K with white trim, emergency version and integrated MIC3 master system:E3-LUC 104/WH/MIC3
MIC 1
DIP Switch
0–2000 lux
N/A
5–30 mins
2–10 metres
N/A
360°
600W
Operating function
Lux level adjustment
Time adjustment to courtesy preset dimmed level
Time adjustment to switch off completely
Sensitivity (range) adjustment
Dimming level (iLite ballast/driver)
Detection angle
Sensor maximum load (inductive)
MIC 2
DIP Switch
N/A
5–30 mins
N/A
2–10 metres
10/25/50%
360°
600W
MIC 3
DIP Switch
N/A
5–30 mins
10–30 mins
1–6 metres
10/25/50%
360°
600W
MIC Operating Functions and Features
t: 01282 448666f: 01282 417703
www.lampslighting.co.uk MIC
Setting 1 =2metres Setting 2 = 5 metres Setting 3 =10metres
0
3.5
10 08 6 4 2 2 4 6 8 10
Detection area (metres)
Mou
ntin
g H
eigh
t (m
etre
s)
0
Sett ing 1 = 1 metre S ett ing 2 = 3 me tres S ett ing 3 = 6 me tres
0
8
10 08 6 4 2 2 4 6 8 10
Detection area (metres)
Mou
ntin
g H
eigh
t (m
etre
s)
0
Master Master Master Master
Master Master Master Master
Master Master Master Master
Master Slave Master Slave
Master Slave Master Slave
Master Master Master Master
Master Master Master Master
Master Master Master Master
Master Slave Master Slave
Master Slave Master Slave
OnKey: Off
Typical Installation Options
The MIC system offers complete flexibility as it can be easily installed into existing or new lighting schemes and requires no complex programming. The following wiring options are available:
Option One
The masters are all working independently for maximum energy efficiency to create a cascade effect. This is ideal for a retrofit installation.
Option Two
The master is working in conjunction with a slave to illuminate a specific zone. The master will control the slaves.
Option Three
The masters and the slaves are working in conjunction to illuminate a larger area.
Option Four
The masters are working together for maximum energy efficiency and sensitivity in a zoned area.
Option Five
All masters are working together for maximum sensitivity and control of a complete area.
Detection Area
MIC 1 & 2 MIC 3