Point-to-Point Solutions for Medium Capacity

CIPHOP 900 IP Series

The CIPHOP 900 IP Series is a next generation Native Ethernet Microwave system, designed for low and medium capacity applications with the mission to minimize CAPEX and OPEX for the operator.

Each terminal of the radio link is composed of an out-door-unit (ODU) with attached antenna, that provides a FE data interface through which the system is also powered (standard Power over Ethernet protocol). The ODU may be connected to a networking device by means of an Ethernet cable either directly (switch, router,..with PoE ports) or through a standard PoE injector, resulting anyway into a ZERO FOOTPRINT installation. An optional 1U half-rack indoor unit (IDU) may be provided to feature TDM E1 interfaces as well as for 1+1 protected configuration.

Due to its simple architecture and Low Power Consumption, together with packet based technology and configuration flexibility, CIPHOP 900 IP Series is a reliable and future-proof solution, very simple to install and maintain, fitting the widest range of network typologies and application scenarios.

HIGHLIGHTS»» Full Ethernet solution

»» Strongest Modulation 4 CPM

»» Up to 40 Mb/s on air Full Duplex

»» All licensed bands 6 to 38 GHz

»» Unlicensed in 5, 17 & 24 GHz available

»» Fully Outdoor

»» 1+1 Protection

»» QoS Management and TDM legacy

»» Low power consumption <15 W

»» Lowest entry cost

»» Simple Installation & Operation

APPLICATIONS

»» 2G/3G  Mobile Spurs & Tails

»» WISPs Networks Access Connectivity

»» Private and Enterprise Networks (WANs, LANs, etc.)

»» Building to Building connection

»» Government & Emergency Services

»» Utilities Network (Airport, Railways, Pipelines, etc.)

»» Tetra Networks Backhauling

»» WiFi - HyperLan and Video surveillance Backhauling

»» Quick Provision for Disaster Recovery

Product Datasheet

Key Features

System Components

Outdoor Unit available from 6 to 38 GHz in Licensed &

Unlicensed (5 -17 & 24 GHz) Bands with or without integrated antenna. In the simplest configuration and for pure data connection

no IDUs is required (only PoE adapter optional)

Standard Power Injector compliant with 802.3at

Power Supply Equipment (PSE) with 2 Fast Ethernet ports switch embedded,

Housekeeping, visual indication alarm (LEDs), 1+1

Configuration (dim. 1U & half ETSI rack)

IDU-GE T with 4 ports GE (2 PoE + 1 Electric + 1 Combo El/

Optical) TDM interface up to 16xE1 (dim. 1U & half ETSI rack)

switch embedded, Housekeeping, 2 ODUs

supported, Synch i/f

Modular ArchitectureCIPHOP 900 IP Series can be provided with integrated antenna up to 1.8 meters. In particular environmental conditions, if required a separated mounting installation is also possible.The variety of system configuration, allows to match requirements of all types of Network Architecture, to assure protected and reliable configuration, as well as smooth migration from old to New Generation Networks.

Lowest ConsumptionCIPHOP 900 IP Series family thanks to its smart design allows the lowest energy consumption <15 Watts. That means it’s ideal for a variety of applications:

» In Rural Area, where is expected to use UPS or other energy backup method, this will allows the systems to stay alive for a long time

» Ideal for installation powered by a photovoltaic panel » Scenarios where energy cost is a key factor » ODU to be powered from external devices

FlexibilityThanks to future-proven design and a variety of solutions both for the indoor and the outdoor sections , depending on the required MW Network Architecture, CIPHOP 900 IP Series is capable to provide a wide range of system configurations among with the most appropriate can be deployed:

» 1+0 No protected Link » 1+1 Hot Standby Link protection

For all above configurations TDM interfaces are available and legacy E1 traffic can be transported efficiently over the Ethernet.

Simplest ArchitectureIn all those scenarios where only Ethernet Connection is required (Building to Building or Leased Backhauling e.g.) and fast and easy installation and maintenance are the key factors, as well as related costs, the CIPHOP 900 IP Series is likely to be the best-fit solution and allows a ZERO FOOTPRINT impact.

Frequency Seeker For CIPHOP 900 IP Series in Unlicensed Bands the Interferences Frequency Seeker functionality is available helping the operator, during the field installation, to choice the best couple of frequencies (or those with less level of interference) to maximize the radio link performance

Fully software configurableLike all Linkra radio systems, CIPHOP 900 IP Series radios are fully software configurable, easily scaling. License key upgrades are used to increase base Ethernet capacity within pay-as-you-grow approach. The software management is embedded in the ODU and there’s no need of additional SW. Only a normal web browser to manage all system features. Channel bandwidths (from 3.5 to 28 MHz) and capacity upgrading (according to channel spacing) are configurable and manageable via SW interface.

Dat

a Tr

affic

Dat

a Tr

affic

INTERNET

Data Traffic Data Traffic

5 GHz 6L/6U GHz 7GHz 8GHz 10.5GHz 13GHz 15GHz 17GHz 18GHz 23GHz 24GHz 26GHz 38GHz

Frequency range (GHz) 5.4255.725

5.925 7.125

7.17.9

7.98.5

10.1510.7

12.7513.25

14.5 15.35

17.1 17.3

17.7 19.7

21.2 23.6

24.0 24.25

24.526.5

37.039.5

Modulation 4 CPM

Max. Output Power(dBm) @ antenna port 26 26 26 26 23 21 21 15 21 21 15 20 20

Tx power regulation range (ATPC) 0÷26 0÷26 0÷26 0÷26 0÷23 0÷21 0÷21 -12÷15 0÷21 0÷21 -12÷15 0÷20 -3÷20

Chanel Spacing (MHz) 3.5 - 7 - 14 - 28 (SW configurable)

Sensitivity (dBm) BER 10-6 @ antenna port@ 3.5/7/14/28 MHz C.S.

-91-89-86-83

-91,5-88,5-85,5-82,5

-90,2-87,2-84,2-81,2

-90,2-87,2-84,2-81,2

-93-90-87-84

-93-90-87-84

-90,2-87,2-84,2-81,2

-91,2-88,2-85,2-82,2

-91,5-88,5-85,5-82,5

-90,5-87,5-84,5-81,5

-89,5-86,5-83,5-80,5

-90,5-87,5-84,5-81,5

-82,7-79,7-76,7-73,7

Power Feed -48 Vdc ±20% or 110/220 Vac using PoE (IEEE 802.3af)

Power Consumption <15 Watt

IDU-ODU Connection According to IEEE 802.3 standard Ethernet cable, S-FTP 24 AWG Cat. 5E for outdoor application (temperature range –33° C to +55° C )

ODU i/f data FE RJ45 conn. ; RSSI Voltage BNC conn. for link alignmentODU dimension 280H x 280W x 80D mm

ODU weight <4.2 Kg ( 5.2 Kg on 7/8 GHz)

Radio Section

Network management: In-bandProtocol: SNMP v1/v2EMS: Embedded WEB GUINMS: Linkra NMS capable to manage over 4K NEs Functionalities: Configuration, Alarms & Performances Monitoring, SW upgrade, Configuration Back-up & RecoveryAddressing: IPV4 & IPV6 for management port

Protocol: IEEE 802.3Frame Size: up to 1522 byteUser Data Throughput: from 4.5 to 37 Mbit/s Full DuplexLatency: <200µS @ full capacity with 64 byte; <1 ms for all other applicationsUser interface: 10/100 Base-TQoS: 802.1p/1Q; IP ToS/DiffServ supportSecurity and Encryption: Proprietary EncryptionProtection: Storm/Flood & Password

Ethernet Section & Security

Management

Standards & RegulationsProduct safety: EN 60950-1 (2006)Spectral emission: ETSI EN 302 217-2-2, EN 301 893, EN 300 440Safety: IEC 60950 -1, IEC 60215 EN 50385Environmental conditions: Ref. [13] EN 300 019Stationary Use (ODU): The operating range Class 4.1 (-33/+55° C), At -40° C the startup of the equipment must be guaranteed and a 15 min. warm-up is allowed Solar Shield is available.Stationary Use (IDU): The operating range Class 3.2 (-5/+45 °C extended to +55 °C)Cabinet degree of protection (ODU): compliant with IEC 529 or equivalent IEC 68-2-18, Dust and throw of water IP65Specification of environmental testsStationary Use (ODU): EN 300 019-2-4 test T 4.1 (IEC Class 4M5 for vibrations), EN 300 019-2-4 test T4.1 (IEC Class 4M3 for shocks)Stationary Use (IDU): EN 300 019-2-3 test T 3.2 , EN 300 019-2-3 test T 3.2Cabinet Surface treatment: 96h salt mist (IEC 60068-2-11 test KA)Ecological compatibility: 2002/95/EC (RoHS), 2002/96/EC (WEEE)Battery interruption or variation according to: ETSI EN 300 132-2EMI/EMC: EN 55022 Class B - IEC 60950 add.IV-Class III, ETSI EN 301 489-1/4 Class BSurge: 5 kV - 10/700 microsec ITU-T k.45 for IDU-ODU Cable onlyREACh: Compliant with EC 1907/2006RoHS: Compliant with 2002/95/EC and WEEE 2002/96/EC

Technical Specifications

Note: Throughput depends on frame size

THROUGHPUT @ 4 CPM MODULATION

CHA

NN

EL

SPA

CIN

G

3.5 MHz 4.5 Mbps

7 MHz 9 Mbps

14 MHz 18 Mbps

28 MHz 36 Mbps

Throughput

Note(1) Regulatory for RF bands (Licensed & Unlicensed both) may vary by geographic location(2) Transmit power depends on frequency, modulation and geographic regulations

License Capacity Max Throughput

Basic (*) 10 Mbit/s 9 Mbit/s Low

Entry 20 Mbit/s 18 Mbit/s Mid

Advanced 40 Mbit/s 36 Mbit/s High

System Terminal Configuration

1+0 1+1 HSTBY (*)

ODU + PoE inj. -

ODU + PSE 2 ODU + 2 PSE

ODU + IDU-GET (16xE1) 2 ODU+ 1 IDU-GET (16xE1)

(*) Antenna Coupler 3:3 or 1:10 available

License

(*) Basic license is available also in not up-gradable version

www.linkra.it

For further information contact:LINKRA s.r.lStrada Provinciale per Monza, 3320863 Concorezzo (MB)Tel.+39 039 6117 405/304Fax +39 039 6117 480E-mail sales-linkra@linkra.it

© Linkra s.r.l All right reserved. Content subject to change without any notice.

Datasheet CIPHOP 900 IP Series v.1.8Issued June 2012