cim lab exam q s
TRANSCRIPT
-
8/10/2019 cim lab exam q s
1/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
2/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
3/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
4/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
[Using Rotation Codes]
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
5/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
[Using Mirror Commands]
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
20 15 20 10 25
18
22
20 10
15
M22
10 10
-
8/10/2019 cim lab exam q s
6/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
90
90
60
20
10
[Using Mirror Commands]
Write a manual part program and simulate using CNC train cam software for the givenprofile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
7/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
90
90
25
,98
30
O26
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
20 15 20 10
22
20 10
M22
10 10
-
8/10/2019 cim lab exam q s
8/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the givenprofile using G-codes and M-codes: Given depth of cut: 5 mm.
90
90
O26
O10
O 60
[Using Rotation Codes]
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
20 15 20
22
20
M22
10
18
-
8/10/2019 cim lab exam q s
9/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
90
90
O10
O 60
30
30
[Using Rotation Codes]
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
10/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
90
90
25
,98
30
20
20
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
11/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
90
2
0
20
40
9
0
38,0
4
23,5
1
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
-
8/10/2019 cim lab exam q s
12/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
90
40
90
38
,04
23
,51
O 24
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
20 15 20
2
2
20
M18
20
18
-
8/10/2019 cim lab exam q s
13/17
-
8/10/2019 cim lab exam q s
14/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
20 15 20
22
20
M22
20
18
20
10
-
8/10/2019 cim lab exam q s
15/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes: Given depth of cut: 5 mm.
Write a manual part program and simulate using CNC train cam software for the given
profile using G-codes and M-codes
20 15 20
22
20
M22
20
18
22
10
-
8/10/2019 cim lab exam q s
16/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)
Viva voce Questions
1) Define CIM?
2) Differentiate CAD, CAM & CIM.
3) Define Automation?
4) Define relationship between automation and CIM.
5) What are the types of automations?
6) What is AGV?
7) What are the types of AVGs?
8) What is CNC Part programming?
9) What is reference point?
10) What is linear and circular interpolation?
11) What is the Name of G-code? Or G-code is called ____________
12) What are preparatory codes? Give any example.
13) What is the Name of M-code? Or M-code is called ____________
14) What are miscellaneous codes? Give any example.
15) What are the modes of programming?
16) What is absolute programming?
17) What is relative or incremental programming?
18) What is feed rate?
19) What is a rapid traverse? And its code
20) What is sub programming?
21) What is canned cycle?
-
8/10/2019 cim lab exam q s
17/17
GHOUSIA COLLEGE OF ENGINEERING RAMANAGARAM-562159
DEPARTMENT OF MECHANICAL ENGINEERING
CIM & AUTOMATION LAB (10MEL78)22) What is tool Cutter Compensation?
23) Expand FMS.
24) What is FMS?
25) What are basic components of FMS?
26) What are the types of FMS?
27) Definition of Robot?
28) What are the methods of robot programming?
29) What is robot programming language?
30) What is end effect-or?
31) What are types of end effectors?
32) What is gripper?
33) What are different types of grippers used in robot?
34) What are interlocks?