PVC profiled rooflight sheets

ONDUCLAIR PVC

Natural light illumination

Choice of qualities

Easy to handle and fix

www.onduline.co.uk

®

CI SfB (4-) Nn2

Onduclair PVC® sheets are manufactured to the highest standards using polyvinyl choride resin (thermoplastic resin) produced in five thicknesses to match your requirments.Onduclair PVC® sheets provide natural light illumination on roofs and side claddings on all types of buildings. Onduclair PVC® is the first choice for residential, commercial, industrial and agricultural projects.

ONDUCLAIR PVC

A HIGH PERFORMANCE RANGE Developed continuously since 1963. The Onduclair PVC® range provides a durable, high performance roofing sheet you can rely upon. Excellent light transmission - 80 to 85% clarity in transparent or clear. High resistance to hail under normal conditions. The sheets comply with European standards: EN 1013-1 and EN 1013-3.

ADVANTAGESLASTING PERFORMANCEOnduclair PVC® sheets are produced using co-extrusion 2-sided protection technology. As a consequence the sheets light transmission capabilities can be sustained over long periods, resulting in the sheets having a high resistance to UV degradation.

GUARANTEED QUALITYWith the benefit of over 50 years experience in manufacturing PVC sheets, we are able to guarantee* with confidence the products weathering performance, reflecting in the sheets long service life under normal service conditions. Note: Only Onduline PVC® heavy duty sheets or are recommended for use with Onduline corrugated bituminous roofing contact the Onduline Sales office for details.

A COMPLETE PROFILE RANGEThe Onduclair PVC® range is available in a wide range of ribbed and corrugated profiles in both translucent and coloured sheet finishes. Simply select the appropriate sheet finish, grade and thickness to match your project requirements.

A range which meets every need

* Terms and conditions apply.

INSTALLATION INSTRUCTIONS 1/ Determine the distance between the purlin support centres using the Onduclair PVC technical data sheets, and set the roof out allowing for the required sheet side and end laps.2/ Install the sheets from the eaves to the ridge, starting from the opposite direction of prevailing winds, with the corrugations or ribs running down the slope of the roof.3/ Drill the fastener holes to a diameter of 5 mm larger than the fastener diameter and at least 50 mm from the sheet end.4/ Onduclair PVC fixing components must be used, as the corrugation support blocks avoid the possibility of deforming the sheet corrugations whilst fixing the sheet. 5/ Take care not to overtighten securing fixings allowing for thermal movement in the sheets as they expand and contract in response to solar heating.6/ On exposed sites, provide an additional side corrugation overlap to enhance weathering protection and increase sheet end lap as detailed in the fixing specification.

7/ All purlin supports covered with PVC sheets must be painted white or be a light colour to avoid heat distortion.8/ Caution: Covering roofs can be a hazardous operation. all work must be carried out with due regard to Health and Safety regulations as set out in HSG33 (Roof work).

THE ONDUCLAIR PVC RANGE

TRADE RANGE* (0,8, 1.0, 1.1mm) Entry level roofing sheets produced for the DIY market (carports, garden shelters, pergolas, etc.).

PRO RANGE* (1.1 1.2 mm)Professional grade roofing sheets produced to meet the exacting requirements of the industrial and agricultural markets.

PREMIUM RANGE* (1,3 mm)High performance roof sheets for use in hostile environments. Guaranteed against hail under normal climatic conditions.

INSTALLATION NOTES

Profile Minimum slope

Minimum transverse coverage

Maximum spacing

Large Profiles 5 0 degrees

9 % slope1 in 11 gradient

200 mm, option reduced to

140 mm*

1,385 m

Small / Mini Profile15 0 degrees

25 %1 in 4 gradient

140 mm, option reduced to 100 mm*

1,10 m

Ribbed profiles (Greca and

steel-sheet box profiles)

4 0 degrees 7 %

1 in 14 gradient

200 mm, option reduced to 150 mm*

Variable according to profile, never

exceed 1,50 m

®

a/ Refer to our technical fixing specification oralternatively contact our technical sales department for project advice.b/ Applications should be in compliance with the relevant B.S. Standards and Building Codes of Practice.c/ Use the Onduclair PVC® sheets without shading systems (blinds, etc.) or insulating products. d/ The Onduclair PVC® sheets must not be used to form dual walls or over roofing, continuous ventilation under the sheets from the eaves to the ridge is a vital requirement. e/ The width of the purlin support must be at least 40mm for steel and 60mm for timber.

* in sheltered areas depending on the geographic area and roof slope

Onduline offer a range of accessories for the most commonly used profiles (attachment kits) and corrugation support fillers. For all information, consult the Sales Department for advice and details.

Profiles Accessories

Large Profiles Wood screw Reinforced plastic corrugation support Saddle washer

Mini Profiles Wood screw 6 x 60 Plastic wedge Saddle washer

GRECA box Profilles Wood screw 6 x 60 Plastic wedge Saddle washer

ACCESSORIES

2 YEARS

5 YEARS

10 YEARS

TRANSPORT AND STORAGEOnduclair PVC® sheets must be stored flat, away from dampness, direct sunlight and any source of heat, as prior to fixing sheets exposed to U.V. radiation can deform. Therefore, the sheets should be stored internally, or covered with a suitable tarpaulin on site. These precautions must be respected regardless of the product quantity and storage time. Never place one pallet on top of another; the pallets must also be weighed down in strong wind.

Onduline Building Products LtdEardley House, 182-184 Campden Hill Road,Kensington, London, W8 7ASTel: 020 7727 0533Fax: 020 7792 1390E-mail: enquiries@onduline.net

www.onduline.co.uk

Plastics Division

®

THE RANGE OF PROFILES The Onduclair PVC® sheets are manufactured to the highest standards in five thicknesses and an extensive range of profiles and widths, a small selection of which is represented below. The Sales Department will be pleased to assist you match your exact product requirements.

Note

: The

info

rmat

ion

in th

is br

ochu

re is

cor

rect

at t

he ti

me

publ

ishin

g, O

ndul

ine

rese

rve

the

right

to c

hang

e sp

ecific

atio

ns a

t any

tim

e w

ithou

t prio

r not

ice.

TK P

02 –

01

- 201

2PROFILE: ONDULINE CLASSIC 95 /38 Onduline Classic 95 / 38 profile: Sheet Colour: Translucent or Clear Thicknesses: 1mm, 1.1mm, or 1.3mmSheet: Length: Width: Cover Width: 1830mm / 6ft 950 mm 850 mm 2440mm / 8ft 950 mm 850 mm 3050mm / 10ft 950 mm 850 mmCorrugation dimensions: 95 x 38mm (nominal)

PROFILE: ONDULINE MINI Onduline Mini Profile: Sheet Colour: Translucent or Clear Thicknesses: 0.8mm, 1mm Sheet: Length: Width: Cover Width: 1830mm / 6ft 866mm 768mm 2440mm / 8ft 866mm 768mm 3050mm / 10ft 866mm 768mmCorrugation dimensions: 48 x 24mm (nominal)

PROFILE: 3” FIBRE CEMENT 3” Fibre Cement profile: Sheet Colour: Translucent or Clear Thicknesses: 0.8mm 1.1mm or 1.3mm Sheet: Length: Width: Cover Width: 1830mm / 6ft 762mm 651mm 2440mm / 8ft 762mm 651mm 3050mm / 10ft 762mm 651mmCorrugation dimensions: 72 x 19mm (nominal)

PROFILE: IRON 3” Iron Profile 3”: Sheet Colour: Translucent or Clear Thicknesses: 1mm, 1.1mm, or 1.3mmSheet: Length: Width: Cover Width: 1830mm / 6ft 660 mm 608 mm 2440mm / 8ft 660 mm 608 mm 3050mm / 10ft 660 mm 608 mmCorrugation dimensions: 76 x 18mm (nominal)

PROFILE: 6” FIBRE CEMENT 6” Fibre Cement profile: Sheet Colour: Translucent or Clear Thicknesses: 1.1mm, or 1.3mmSheet: Length: Width: Cover Width: 1830mm / 6ft 1086mm 1016mm 2440mm / 8ft 1086mm 1016mm 3050mm / 10ft 1086mm 1016mmCorrugation dimensions: 146 x 48mm (nominal)

Box PR Greca: Sheet Colour: Translucent or Clear Thicknesses: 0.8, 1mmSheet code: Length: Width: Cover Width: 1830mm / 6ft 1090mm 988mm 2440mm / 8ft 1090mm 988mm 3050mm / 10ft 1090mm 988mm

PROFILE: BOX PR GRECA

Corrugation dimensions: 76 x 17mm (nominal)