ci-01_dec10
TRANSCRIPT
-
8/2/2019 CI-01_Dec10
1/2
-
8/2/2019 CI-01_Dec10
2/2
circuit
ideas
electronics for you December 2010 10 9w w w . e f y m a g . c o m
forms a simple voltage follower (its
output follows its input), providing a
low output impedance to drive into the
standard power amplier.
Assemble the circuit on a general-
purpose PCB and t it to the rear of an
amplier. The unit must be compact,
yet robust. So use a very sturdy alu-
minium extrusion for the cabinet in or-
der to neatly house the assembled PCB.
To ensure simple operation, there
are only three connections to the unit.
First, mains power is tapped from the
transformer. The second lead carries
the 9V output to the amplier. The
third is the guitar signal input at the
ve-way socket for connection to the
effect pedal.