chrome - kimre · chrome you are an expert in your process... hrome plating involves the...
TRANSCRIPT
CHROME
YOU ARE AN EXPERT IN YOUR PROCESS... Chrome plating involves the electrolytic deposition of chromium onto metal
components. Plating baths of hexavalent chromic acid are the most widely used in
the industry. These baths produce very fine mists of chromic acid which must be
controlled. Airborne emissions of hexavalent chrome are facing increasingly
stringent pollution abatement requirements. In almost all applications where high
efficiency control of hexavalent chromium is required for regulatory compliance,
Kimre’s B-GON® Mist Eliminator Systems featuring its composite mesh-pad designs
have been used. EPA-sponsored test results have shown that Kimre systems exceed
the most stringent requirement in the U.S. and around the world. Our designs
achieve emissions below 0.002 mg/m3.
WE ARE AN EXPERT IN OPTIMIZING YOUR PROCESS! Our composite B-GON® mesh-pads are provided in removable cassettes which allow for ease of cleaning and maintenance, when necessary. This feature allows the B-GON Pads to be cleaned and re-used for many years, providing cost-effective solutions for your plating emission needs. Let Kimre engineers review your process emission needs. We are happy to provide the best, most cost-effective designs to meet your requirements.
WWW.KIMRE.COM
KIMRE
Increase process effectiveness and productivity with minimized operating and
maintenance.
B-GON® structured media, your MACT
compliance standard for composite
mesh –pad systems.
Hard chrome electroplating
Chrome anodizing
Chromic and acid mists
Nickel electroplating
• High efficiency
• Low operating pressure
• Long life
• Documented results
• Non - clogging
• Ease of cleaning
• Dry operation
CHROME
Photos courtesy of some of the many world-wide OEM users employing KIMRE™ Technology