chp4,ph,_titrations
TRANSCRIPT
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
pH and Titration
Relation between pH and Hydrogen Ion ConcentrationThe pH scale is widely used to report the molar concentration of hydrogen ion, H+(aq), in
aqueous solution. The pH of a solution is defined as
€
pH = − log10[H+] (1)
where [H+] = the molar concentration of H+(aq) in the solution. (In chemistry, square brackets around a chemical symbol mean "the molar concentration of" whatever they enclose.) Equation (1) above may be solved for [H+] to give
€
[H+] =10−pH (2)
Page 1 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
(Here we use the well known rule that if
Page 2 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
y =log10 x
Page 3 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
, then
Page 4 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
x =10yPage 5 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
.) In practice, the pH scale is only used when [H+(aq)] is less than 1.0 M. See Chang, pp. 631-633, for further information.
Acidic, basic, and neutral solutions can be distinguished as shown below:
Type of Solution pH [H+] Color of litmusAcidic < 7.00 > pink
Page 6 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
1.0 × 10−7Page 7 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
Neutral = 7.00 = in between
Page 8 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
1.0 × 10−7Page 9 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
Basic > 7.00 < blue
Page 10 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
1.0 × 10−7Page 11 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
TitrationA titration is a procedure in which a solution of known concentration is used to
determine the concentration of another solution with which it reacts. The reaction must be rapid and should go to completion. It may be an acid-base reaction, an oxidation-reduction reaction, or a precipitation reaction.
Typically a titration is conducted by filling a buret with one solution and transferring an exact amount of the second solution to an Erlenmeyer (conical) flask with a pipet. Indicator is added to the flask, and the first solution is added drop wise from the buret until the indicator changes color. The point of color change is called the endpoint, the equivalence point, or the stoichiometric point of the titration: all of these terms are synonymous. The indicator is chosen so the color change occurs when stoichiometric amounts of the reactants have been added to the flask.
The concentration of the unknown solution is calculated as illustrated in the exercise 3 below.___________________________________________________________________________Exercises:1. Use Eq (1) and the log10 button on your calculator to determine the pH of solutions with the specified hydrogen ion concentrations [H+]:
(a) (b) (c) (d) (e) (f)[H+] 0.10 M 0.0010 M 10-7 M 5.0 x 10-10 M 6.0 M 1.0 MpH
Acidic, basic or neutral?
Answers: pH values are(a) 1.00 (b) 3.00 (c) 7 (d) 9.30 (e) - 0.78 (f) 0.00
Page 12 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
Answers to #1 above, continued:Solutions (a), (b), (e), and (f) are acidic; solution (c) is neutral; solution (d) is basic.Notes: pH values are logarithmic numbers. In a logarithmic number, only the numbers to the right of the
decimal point are counted as significant figures. Also, note from part (e) that when [H+] > 1, the pH is negative!!)___________________________________________________________________________2. Use Eq (2) and the +/- and 10x buttons on your calculator to determine the [H+] of solutions with the following pH values:
(a) (b) (c) (d) (e)pH 2.00 4.00 0.30 12.80 4.500[H+]
Acidic, basic or neutral?
Answers: [H+] values are(a) 0.010 M (b) 1.0 x 10-4 M (c) 0.50 M (d) 1.6 x 10-13 M (e) 3.16 x 10-5 M Solutions (a), (b), (c), and (e) are acidic; solution (d) is basic.___________________________________________________________________________3. A 25.00 mL sample of a 0.5250 M H2SO4 solution is titrated with a NaOH solution using phenolphthalein as the indicator. It is found that 22.07 mL of the NaOH solution is needed to reach the endpoint of the titration. What is the molarity of the NaOH solution?
Notes: A good procedure is to divide the problem into the following steps:• Write the balanced overall equation for the reaction.• Determine the moles of the known solution available (in this case find the mol H2SO4 available).• Use your result from step 2 above and the stoichiometric ratio from the balanced equation to find the
moles of the other solution (the one of unknown concentration) needed for complete reaction (in this case use the mol H2SO4 and your balanced acid-base equation to find the mol NaOH needed). (Alternatively, steps 2 and 3 can be combined into one step! Do you see how this could be accomplished?)
• Obtain the molarity (M) by dividing the moles obtained in step 3 by the volume of the same solution used in the titration, and converting units to obtain mol/L (here begin by dividing mol NaOH by 22.07 mL).
Page 13 of 14
Chang, 8th Edition, Chapter 4, Worksheet #4 S. B. Piepho, Fall 2005
Answers: 2.625 x 10-2 mol NaOH needed to reach the endpoint; 1.189 M NaOH
Page 14 of 14