chorus - fmicassets.comyour new fender® ultimate chorus amplifier is a fine musi- cal instrument...
TRANSCRIPT
Your new Fender® Ultimate Chorus amplifier is a fine musi-cal instrument that will deliver great tone and pleasure foryears to come. It combines many of the great musical fea-tures that have made Fender® amplifiers the only seriouschoice of guitarists for over 45 years, with a few new tricksof its own.
The most striking tonal feature of the Ultimate Chorus ampis its fat, full-range chorus. Unlike many other chorusdesigns that can make an amp sound thin or “washsy”, ourclassic analog circuit actually adds depth and dimension toany style of playing— whether you’re playing rhythm orsolo. Also, besides the basic Volume, Treble, Mid, Bass andReverb controls in the Normal channel, the Ultimate Chorusfeatures completely independent Reverb and Tone controlsin the Drive channel.
The DRIVE channel also features exclusive Fender® Pre- &De-Emphasis Distortion circuitry based on unique Pre andPost clipper voicing filters. These filters were designed tosimulate the preamp tone settings and speaker output of anoverdriven tube amplifier. You get the searing smoothhighs backed by deep punch that stack amps are knownfor. The MID BOOST switch provides a second pre-empha-sis voice and the PRESENCE control provides continuousvariation of the high frequency content in the de-emphasisvoicing. The extended range, three band equalization cir-cuitry is after the distortion and can be used to further mod-ify the overall sound of the amp. In addition, a true, stereochorus circuit utilizing two 65-watt power amplifiers givesthis amp that lush, stereo chorus sound. The Fender® ULTI-MATE CHORUS is one of the most “Expressive” amplifiersever made.
In addition to convenient features like All Front PanelMounted Controls and Jacks, the ULTIMATE CHORUS fea-tures a detachable footswitch for selecting the DriveChannel and for activating the stereo chorus circuitry.
These switching functions are sent over a standard 1/4inch phone plug for ease of connection or extension of thefootswitch to remote pedal boards. The versatility of theULTIMATE CHORUS is greatly expanded by the individualmono and true, stereo effects loops. These patch pointsallow for a wide variety of external effects connectionschemes and amplifier slaving configurations. They alsoprovide for direct connection to recording and sound rein-forcement mixers.
Last, but definitely not least, the Fender® ULTIMATE CHO-RUS packs a new stereo power amp section based on aradically underdamped design that interacts with thespeakers in much the same way as a tube amplifier does,producing sparkle and punch with an increase in apparentloudness and power that defies comparison to other simi-larly rated units. These amps are LOUD, and the FenderSpecial Design 12 inch speakers can reliably put it out, dayafter day.
This manual is designed to familiarize you with your newamplifier and to acquaint you with its many fine features.Read it carefully so that you will benefit from all the fea-tures as soon as you start using the amplifier.
The built-in quality of a Fender® amplifier is the result ofover four decades of dedication in the combined skills ofresearch and development by our engineers and musicians.
That is why we proudly say...FENDER®, The Sound ThatCreates Legends.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCKHAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN ORMOISTURE.
INTRODUCTION
PO
WE
RV
OLU
ME
TR
EB
LEM
IDB
AS
SR
EV
ER
BG
AIN
TR
EB
LEM
IDB
AS
SR
EV
ER
BR
AT
ES
ELE
CTD
EP
TH
INP
UT
S
1M
ON
OF
XS
TE
RE
OF
X2
FO
OT
SW
ITC
HS
EN
DS
EN
DR
ET
UR
NR
ET
UR
N
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5N
OR
MA
LC
HA
NN
EL
DR
IVE
CH
AN
NE
LC
HO
RU
S
L R0
00
00
0
VO
LUM
E
237
64 0
19
10
8
5
0
PR
ES
EN
CE
322
11 5
+-
44
5
3
0
500
00
00
0
PO
WE
RV
OLU
ME
TR
EB
LEM
IDB
AS
SR
EV
ER
BG
AIN
TR
EB
LEM
IDB
AS
SR
EV
ER
BR
AT
ES
ELE
CTD
EP
TH
INP
UT
S
1M
ON
OF
XS
TE
RE
OF
X2
FO
OT
SW
ITC
HS
EN
DS
EN
DR
ET
UR
NR
ET
UR
N
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5N
OR
MA
LC
HA
NN
EL
DR
IVE
CH
AN
NE
LC
HO
RU
S
L R0
00
00
0
VO
LUM
E
237
64 0
19
10
8
5
0
PR
ES
EN
CE
322
11 5
+-
44
5
3
0
500
00
00
0
PO
WE
RV
OLU
ME
TR
EB
LEM
IDB
AS
SR
EV
ER
BG
AIN
TR
EB
LEM
IDB
AS
SR
EV
ER
BR
AT
ES
ELE
CTD
EP
TH
INP
UT
S
1M
ON
OF
XS
TE
RE
OF
X2
FO
OT
SW
ITC
HS
EN
DS
EN
DR
ET
UR
NR
ET
UR
N
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5N
OR
MA
LC
HA
NN
EL
DR
IVE
CH
AN
NE
LC
HO
RU
S
L R0
00
00
0
VO
LUM
E
237
64 0
19
10
8
5
0
PR
ES
EN
CE
322
11 5
+-
44
5
3
0
500
00
00
0
PO
WE
RV
OLU
ME
TR
EB
LEM
IDB
AS
SR
EV
ER
BG
AIN
TR
EB
LEM
IDB
AS
SR
EV
ER
BR
AT
ES
ELE
CTD
EP
TH
INP
UT
S
1M
ON
OF
XS
TE
RE
OF
X2
FO
OT
SW
ITC
HS
EN
DS
EN
DR
ET
UR
NR
ET
UR
N
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5
237
64 0
19
10
8
5N
OR
MA
LC
HA
NN
EL
DR
IVE
CH
AN
NE
LC
HO
RU
S
L R0
00
00
0
VO
LUM
E
237
64 0
19
10
8
5
0
PR
ES
EN
CE
322
11 5
+-
44
5
3
0
500
00
00
0
ULTIMATE CHORUS EFFECTS LOOP CONNECTION DIAGRAMS
1. For mono effects devices
EXTERNALEFFECTS
OUTPUTINPUT
MONO FX STEREO FX
SEND RETURN SEND RETURN
LR
SHIELDED CABLE
SLEEVE
TIP
SHIELDED CABLE
2. For stereo in/stereo out effects devices
EXTERNALEFFECTS
OUTPUTSINPUTS
MONO FX STEREO FX
SEND RETURN SEND RETURN
LR
SHIELDED CABLE
SLEEVE
TIP
SHIELDED CABLE
LEFT LEFT
RIGHT RIGHT
TIP
RING
SHIELDED CABLE SHIELDED CABLE
TIP
RING
3. For mono in/stereo out effects devices
EXTERNALEFFECTS
OUTPUTS
INPUT
MONO FX STEREO FX
SEND RETURN SEND RETURN
LR
SLEEVE
TIP
SHIELDED CABLE
LEFT
RIGHT
TIP
RING
SHIELDED CABLE
SHIELDED CABLE
Ring and tip areconnected together
Note:Connecting a monoinput effects deviceas shown will cancelthe stereo image ofthe internal Chorus.
4. For mono in/stereo out effects devices (Alternate connection)
EXTERNALEFFECTS
OUTPUTS
INPUT
MONO FX STEREO FX
SEND RETURN SEND RETURN
LR
SLEEVE
TIP
SHIELDED CABLE
LEFT
RIGHT
SHIELDED CABLE
SHIELDED CABLE
TIP
RINGNote:Connecting a monoinput effects deviceas shown will bypassinternal Chorus completely
ULTIMATE CHORUS FRONT PANEL FUNCTIONS
INPUT 1- A high impedance, high sensitivity plug-inconnection for instruments.
INPUT 2- Plug-in connection for instruments. Thisinput exhibits a lower input impedance and sensitivitythan INPUT 1 (Item A) and is useful with active preampguitars, and will provide a darker tone with passiveguitars. Both inputs are identical when used simulta-neously.
VOLUME- Adjusts the overall loudness of the NormalChannel.
NORMAL CHANNEL INDICATOR- This LED is illumi-nated when the Normal Channel is active.
TREBLE- Adjusts the amount of boost (accentuation) orcut (attenuation) in the high frequency range of theNormal Channel.
MID- Adjusts the amount of boost or cut in the mid fre-quency range of the Normal Channel.
BASS- Adjusts the amount of boost or cut in the lowfrequency range of the Normal Channel.
REVERB- Adjusts the overall amount of reverberatedsignal mixed with the original dry signal for theNormal Channel.
GAIN- Adjusts the amount of preamp amplification inthe Drive Channel. Cleaner sound is achieved atlower gain settings; high gain settings will producemore sustain and distortion. This control works in con-junction with the DRIVE VOLUME control (Item L) to setthe overall loudness at the output while the DriveChannel is active.
MID BOOST- Activates a special pre-emphasis filter
that accentuates mid range frequencies. This boostoccurs pre distortion in the Drive Channel and will fur-ther modify the distortion characteristic.
PRESENCE- Adjusts the amount of boost or cut in theupper high frequency range of the Drive Channel.This control occurs post preamp distortion and is usefulin adjusting the distortion characteristic from brash, tosmooth.
VOLUME- Adjusts the overall loudness of the DriveChannel.
DRIVE CHANNEL INDICATOR- This LED is illuminatedwhen the Drive Channel is active.
TREBLE- Adjusts the amount of boost or cut in the highfrequency range of the Drive Channel.
MID- Adjusts the amount of boost or cut in the mid fre-quency range of the Drive Channel.
BASS- Adjusts the amount of boost or cut in the lowfrequency range of the Drive Channel.
DRIVE SELECT- Activates the Drive Channel. NOTE:This switch disables the Channel Select Footswitch andthe Normal Channel controls.
REVERB- Adjusts the overall amount of reverberatedsignal mixed with the original dry signal for the DriveChannel.
RATE- Adjusts the sweep rate of the chorus generatingcircuitry. A lower number corresponds to a slowerrate of sweep.
SELECT- Activates the stereo CHORUS mode for boththe Normal and Drive channels. NOTE: This switchdisables the Chorus Select Footswitch.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
VOLUME TREBLE MID BASS REVERB GAIN TREBLE MIDINPUTS
1 2
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
NORMAL CHANNEL DRIVE CHANNEL
A B C D E F G H I J K L N OM
0 0 00 0 0
VOLUME
2
3 764
01 9
10
8
5
0
PRESENCE
3
2 211
5
+-
4 45
3
0
5 00 0
DEPTH- Adjusts the intensity of the chorus effect. Alower setting will introduce a subtle yet distinct effect,whereas a higher setting will create a more dramaticeffect. With both the RATE (Item S) and DEPTH controlsset midway or higher, a variety of vibrato/tremolotype effects can be achieved.
CHORUS INDICATOR- This LED is illuminated when thestereo chorus is active. The color of the LED is modu-lated red and green by the chorus sweep LFO to givea visual indication of the sweep rate.
FOOTSWITCH- Plug-in connection for remotefootswitch to switch between the Normal and Drivechannels and to activate the Stereo Chorus mode. Forproper operation of the footswitch, both DRIVE SELECT(item Q) and CHORUS SELECT (Item T) switches shouldbe out. NOTE: Any good quality patch cord will workwith the remote footswitch; however, a speaker gradecord is preferable to a coax guitar cord when it isavailable.
MONO FX SEND- This jack provides an unbalancedmono output signal from the preamp at a point beforethe internal CHORUS circuits. This output can be usedin conjunction with the MONO FX RETURN (Item Y) asa patch point for mono effects devices. (SEE EFFECTSLOOP CONNECTION DIAGRAMS.) The MONO FXSEND can also be used to feed recording and soundreinforcement mixers a dry signal. (For a signal withinternal CHORUS, use the STEREO FX SEND (Item Z)jack.) Additionally this output can be used to driveanother ULTIMATE CHORUS as a slave amp. This isdone by connecting a standard guitar cord from theMONO FX SEND jack of the master amplifier to theMONO FX RETURN jack of the slave.
MONO FX RETURN- This unbalanced jack inputs sig-nal to the stereo chorus generating circuitry, which drives the stereo power amp section. It automaticallydisconnects the preamp and reverb circuitry whenused. This is useful when using the MONO FX optionor when using the ULTIMATE CHORUS as a slaveamplifier for a mono signal source. The CHORUS isactive in the slave so that a stereo image will be gener-ated if it is used.
STEREO FX SEND- This jack provides an unbalancedstereo output from the preamp, reverb and chorus cir-cuits of the ULTIMATE CHORUS. This output can beused in conjunction with the STEREO FX RETURN (ItemAA) as a patch point for stereo effects devices. (SEEEFFECTS LOOP CONNECTION DIAGRAMS.) TheStereo Effects Loop jacks are standard 1/4 inch Tip-Ring-Sleeve types, with the left channel signal on thetip and the right channel signal on the ring. This sendcan also be used to feed a stereo signal to two chan-nels of a recording or sound reinforcement mixer.Additionally this output can be used to drive anotherULTIMATE CHORUS as a slave amp. This is done byconnecting a shielded stereo cord from the STEREO FXSEND jack of the master amplifier to the STEREO FXRETURN jack of the slave.
STEREO FX RETURN- This stereo jack inputs signaldirectly to the left and right power amps. It automati-cally disconnects the preamp, reverb and chorus cir-cuitry when used. This is useful when using the ULTI-MATE CHORUS as a slave amplifier for a stereo signalsource.
POWER SWITCH- Turns AC power ON and OFF.When the switch is OFF the amplifier is completelyshut down.
U.
V.
W.
X.
Y.
Z.
AA.
BB.
POWERTREBLE MID BASS REVERB RATESELECT
DEPTH
MONO FX STEREO FX
FOOTSWITCH SEND SENDRETURN RETURN
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5
2
3 764
01 9
10
8
5RIVE CHANNEL CHORUS
LR
N O R S U V W YX ZPM Q T
00 0 0 0 0 0
BBAA
LINE CORD: This amplifier is equipped with a groundingtype supply cord to reduce the possibility of shock hazard.Be sure to connect it to a grounded receptacle.DO NOT ALTER THE AC PLUG.
VINYL CARE: The exclusive Fender® vinyl covering on yourcabinet has been especially designed for years of lastingbeauty. A very light soapy solution on a sponge may beused to remove dirt and residue that may accumulate in thegrain. Be careful not to let any liquid come in contact withoperating surfaces. DO NOT have the amplifier pluggedinto the power outlet when cleaning.
If the amp is set up but does not function, check the following items:• Is the amp power cord properly plugged into an electrical outlet?• Is there power at the outlet?• Are the speakers properly connected to the amplifier?• Are all the control knobs turned up above four?• Is the volume control on the instrument turned up?• Is your instrument properly plugged into the amplifier?
(Eliminate any effect pedals and try another guitar cord.)
If, after checking all of the above, the system is still not performing correctly, consultyour Fender® Service Dealer.
TROUBLESHOOTER‘S CHECKLIST
ULTIMATE CHORUS REAR PANEL
A PRODUCT OF:FENDER MUSICAL INSTRUMENTS CORP.,
BREA, CA 92621MADE IN U.S.A.
INPUT POWER
120V 60Hz
400 VA
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: CHASSIS SURFACE HOTDO NOT EXPOSE THIS EQUIPMENT
TO RAIN OE MOISTURE
ATTENTION: SUPERFICIE DE CHASSIS CHAUDE
SERIAL NUMBER
ULTIMATE CHORUS SPECIFICATIONS
TYPE: PR 204
PART NUMBER: 100V Version 022-6771-010120V Version 022-6701-010230V Version 022-6761-010240V Version 022-6731-010
INPUT IMPEDANCE: INPUT 1 only - Greater than 1MΩINPUT 2 - 131kΩ
NOMINAL LEVEL: INPUT 1 only - 100 mVINPUT 2 - 200mV
POWER OUTPUT: 65W R.M.S. per channel = 130W R.M.S.
RATED LOAD IMPEDANCE: 8 Ohms per channel
MONO EFFECTS LOOP: Nominal Level: -10dBVSend Output Impedance: 1kΩReturn Input Impedance: 25kΩ
STEREO EFFECTS LOOP: Nominal Level: -10dBVSend Output Impedance: 1kΩReturn Input Impedance: 14kΩ(Specifications for each channel - Left on Tip, Right on Ring)
POWER REQUIREMENTS: 100V AC 50/60 Hz, 360W120V AC 60 Hz, 360W230V AC 50 Hz, 360W240V AC 50 Hz, 360W
SPEAKER COMPLEMENT: Two 8Ω Fender® Special Design 12-inch speakers (P.N. 025923)
PHYSICALSPECIFICATIONS: Height: 18-1/2” (47cm)
Width: 26-1/8” (66cm)Depth: 10-1/4” (26cm)Weight: 47 lbs. (21.3kg)
SOUND: “KICKS @$$, in STEREO!”
WARNINGS: NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY.THIS EQUIPMENT MUST BE EARTH GROUNDED.
THIS EQUIPMENT CONFORMS TOTHE FOLLOWING DIRECTIVES :EMC 89/336/EEC AND LV 73/23/EEC
ULTIMATE CHORUS BLOCK DIAGRAM
Input 1
Input 2
Tone Controls
Volume
Treble Mid Bass
Filter
MidBoost
Gain
Drive Channel
Normal Channel
Tone Controls
Treble Mid Bass
Volume
Clipper
Presence
ReverbDrive Reverb Pan
ReverbRecovery
NormalReverb
DriveReverb
Drive Select
Send
Return
MonoFX
Send
Chorus
Rate Depth
Return
RightSpeaker
Right Power Amp
Left Power Amp
StereoFX
LeftSpeaker
ChorusSelect
Off
On
A PRODUCT OF:
FENDER®MUSICAL INSTRUMENTS CORP.,CORONA, CA 91720