chl-retainer-walling-anchor
DESCRIPTION
http://www.aggregate.com/Documents/TDS/CHL-retainer-walling-Anchor.pdfTRANSCRIPT
-
Anchor segmental retaining walls product information
Reliable, cost effective and versatile products, the proven and preferred choice for retaining wall solutions.
Proven performance, patented technology
Economic, cost effective and versatile
Over 65% recycled aggregate content on many standard colours
Available in eight attractive shades to match regional variations across the UK
Reliability of geogrid reinforced earth backfill
Engineering strength and durability
Design advice from our geotechnical engineers
Better utilisation of land
Aesthetically pleasing solution
Fast construction in all weather conditions
No mortar, dry build walling system
Minimal maintenance.
Applications
The Anchor segmental retaining walling range is suitable for all commercial, public and infrastructure schemes. Refer to our technical department for advice on applications: tel: 01335 372222.
The blocks are available in a split finish. These units are straight split to reproduce the traditional dressed appearance of natural stone. Supplied face only as standard.
Manufacturing standards
Anchor retaining walls is manufactured in accordance with and complies to C1372 - 01a (standard specification for SRW units).
Charcon Hard Landscaping fully operates an accredited Quality Assurance scheme, certified to BS EN 9001:2008 which is independently and regularly assessed by BSI (British Standards Institution). All Charcon manufacturing sites are also certified to BS EN 14001 Environmental Management Systems.
Performance
Strength: Currently complies to ASTM C140 for compressive strength.
Complementary products
Designed for use with the Charcon suite of products.
1 2 3 4
6 7 8 9
5
10
11 12
Colour swatches
Diamond 25 Vertica Landmark
1. Wheaten 4. Cotswold Buff 9. Cotswold Buff
2. Birch 5. Bracken 10. Bracken
3. Marigold 6. Cathedral 11. Cathedral
7. Brindle 12. Brindle
8. Basalt
BBA Certification (road and bridges).
Diamond 25 Type Straight split face Corner block Capping unit
Dimensions (nom.) 150x435x250mm 150x217x250mm 75x450x330mm
Unit weight (approx.) 23kg 12kg 11.5kg
Coverage 16 units per m2 N/A 2.3 units per lm
Vertica
Type Straight split face Corner block Capping unit
Dimensions (nom.) 200x457x280mm 200x457x228mm 100x438x254mm
Unit weight (approx.) 37kg 43kg 18kg
Coverage 11 units per m2 N/A 2.7 units per lm
NBS Plus Clause: D41 310, 330. For NBS clauses, refer to our Charcon technical department: tel: 01335 372222.
Landmark
Type Full block Tapered full block Tapered half block Foundation block Capping unit
Dimensions (nom.) 380x200x300/320mm 380x200x310/300mm 190x200x310/300mm 190x200x298mm 95x440/275x260mm
Unit weight (approx.) 39kg 36kg 24kg 22kg 18kg
Coverage 13.2 units per m2 13.2 units per m2 26.3 units per m2 26.3 units per m2 2.8 units per lm
BBA Certification (road and bridges).
-
Anchor segmental retaining walls product information
Sustainability and local sourcing
Energy use: Aggregate Industries is at the forefront of sustainability and has committed to reduce carbon emissions by 20% by 2012 based on a 2008 base line.
Recyclable: 100% of the product can be recycled thus reducing the amount of material that is sent to landfill.
Manufacturing location: produced in the UK, with locally sourced materials under strict environmental and social legislation, for local supply.
Responsible sourcing: Aggregate Industries is the first company in the world to achieve a BES6001:2008 Responsible Sourcing Certificate from BRE Global. Products are assessed on:
quality management
environmental management
health and safety management
greenhouse gas emissions
labour practice
biodiversity
community engagement.
For further information please refer to the Charcon sales office tel: 01335 372222.
Key aggregates and recycled content
Locally sourced aggregates manufactured on modern automated plants using specially selected secondary recycled aggregates. Replacement cement is also incorporated to minimise environmental impact, whilst maintaining quality throughout.
Generic green guide rating*
There is currently no generic rating in the BRE Green Guide for segmental retaining wall blocks.
Policies
Aggregate Industries' policies on the environment and community, health and safety and sustainable solutions for different product applications can be viewed on our website www.aggregate.com
Design and installation
Install in accordance with the relevant section of NCMA (National Concrete Masonry Association). For specific guidance refer to www.charcon.com or call the Charcon technical department on 01335 372222.
Maintenance and cleaning
Charcon can supply on request advice on specific stain removal and general maintenance, suitable cleaning products, referrals to specialist cleaning companies etc.
COSHH data
Full COSHH data on Charcon products is available on request. Please call the technical department on 01335 372222.
Technical support
Detailed guidance and assistance with the preparation of specification of Charcon Hard Landscaping products including model clauses, is available through the sales office. A free technical design service is also available - use the enquiry form or call Charcon technical services.
For further information, please refer to Charcon Technical Services on 01335 272222.
*Please note: A fee may apply for fully indemnified designs.
Diamond 25, Vertica and Landmark wall systems are manufactured under license from Anchor Wall Systems, Inc. (AWS). The "Anchor Build Something Beautiful" logo is a trademark of AWS.
Diamond 25, Vertica and Landmark are registered trademarks of AWS in the EU. Anchor Wall Systems, Inc., 5959 Baker Road, Suite 390, Minnetonka, MN 55345.
Hulland Ward, Ashbourne, Derbyshire DE6 3ET
Tel: 01335 372222 Fax: 01335 370074
www.charcon.com
The information contained within this publication was accurate at time of production. However, Aggregate Industries reserves the right to introduce modifications or changes to detail at any time without notice. No charge is levied for this publication or advice therein, and accordingly the company, its employees and authorised agents can accept no liability whatsoever, either indirectly or directly arising from the use of its products in connection
Aggregate Industries UK Limited. June 2011 with any information or advice contained in this guide.
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice