chhattisgarh road sign adv

172
1/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected] No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : SCHEDULE “C” LIST OF PARALLEL RATE CONTRACT FOR ITEM- ROAD SIGN BOARD S.No. Name of Tenderers Valid Up to Rate Contract No. 1 M/s. Laxmi Engineering Works plot -45,48 Industrial Area korba Road Champa. Telefax- 07819-246021/mob-9425223140 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202// RSB / LEW/3940 2 M/s. PRABHAT GRAPHICS HATRIPARA KAWARDHA Mob. No.-09425558199 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202// RSB / PG/3941 3 M/s. Aman Steel Industries, Sanjay Nagar Raipur 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 4 M/s. Khandelwal Sales Corporation,Gole Bazer,Bilaspur (C.G.) Mob.No.9425530665 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 5 M/s. Shri Shyam Industries, Industries Area, Sirgitti Bilaspur (C.G.)MN-9425220038 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 6 M/s.INTERNATIONAL STEEL INDUSTRY SEMI URBAN INDUSTRIAL AREA BANARAS ROAD AMBIKAPUR SARGUJA (C.G.) Mob-9425420420 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 7 M/s Raman Lal Jain Udyog, Industrial Area, Plot No.-14, 15, 16 Vardhman Nagar Rajnandgaon (C.G.) Mob.9424100015 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 8 M/s. Tanay Enterprises Hotel Centre Point Bldg, Opp. New Bus Stand, Pandri, aipur,Chhattisgarh -492004 Mob.-9425501393, 98271-49000 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 9 M/S SS LOHARI UDYOG, VILLAGE SADDU, VIDHANSABHA ROAD, RAIPUR MO. NO. 9425241114 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SS LU/3970 10 M/s. Shri Ram Industries K.V.C.A JenkinsLink Road Janjgir Dst: Janjgir-Champa (CG) 495668 Mob. 9425252556, 9425538021, 9826760349 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRC/3971 11 M/s. Usha Lohari Udyog Vidhan Sabha Road,Village Saddhu Raipur CG Pho.No. 9425241114, 0771-2282349 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 12 M/s. Raj Industries, Vijyaward Dalpat Sagar Chowk Rammandir , Compoud Jagdalpur Mob- 09425261467 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3975 13 M/s. Soumya Advertisers, M-4,Housing Board Coloney , Kota Raipur 15.12.2011 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3976 14 M/S CHHATTISAGRH STEEL INDUSTRIES, BHARDEBHATA KANKER, DIST. KAKER MO. NO. 94252-59199. 14.02.2012 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 15 M/s Kwality Fabrication Udyog., Near Hero Honda Service, Station Jashpur Nagar Distt.Jashpur (C.G.) Mbl 9754760390,9584050427, 7415523662 14.02.2012 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 16 M/s. Jaiswal Wooden Industries, Saw mill Area, G.E. Road, Rajnadgaon C.G. 07744- 229105, 229731 14.02.2012 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 17 M/s. Shyama industries, Gali No. 05, Control Shop, Deepak Nagar, Durg (C.G.) Mob-98271-98885 14.02.2012 to 14.12.2012 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 (Subas Chandra Bhagat ) I/c Marketing-I

Upload: dipankar

Post on 27-Oct-2015

34 views

Category:

Documents


0 download

DESCRIPTION

Road Signage

TRANSCRIPT

Page 1: Chhattisgarh Road Sign Adv

1/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated :

SCHEDULE “C” LIST OF PARALLEL RATE CONTRACT FOR ITEM- ROAD SIGN BOARD

S.No. Name of Tenderers Valid Up to Rate Contract No. 1 M/s. Laxmi Engineering Works plot -45,48

Industrial Area korba Road Champa. Telefax-07819-246021/mob-9425223140

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202// RSB / LEW/3940

2 M/s. PRABHAT GRAPHICS HATRIPARA KAWARDHA Mob. No.-09425558199

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202// RSB / PG/3941

3 M/s. Aman Steel Industries, Sanjay Nagar Raipur

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964

4 M/s. Khandelwal Sales Corporation,Gole Bazer,Bilaspur (C.G.) Mob.No.9425530665

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965

5 M/s. Shri Shyam Industries, Industries Area, Sirgitti Bilaspur (C.G.)MN-9425220038

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966

6 M/s.INTERNATIONAL STEEL INDUSTRY SEMI URBAN INDUSTRIAL AREA BANARAS ROAD AMBIKAPUR SARGUJA (C.G.) Mob-9425420420

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967

7 M/s Raman Lal Jain Udyog, Industrial Area, Plot No.-14, 15, 16 Vardhman Nagar Rajnandgaon (C.G.) Mob.9424100015

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968

8 M/s. Tanay Enterprises Hotel Centre Point Bldg, Opp. New Bus Stand, Pandri, aipur,Chhattisgarh -492004 Mob.-9425501393, 98271-49000

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969

9 M/S SS LOHARI UDYOG, VILLAGE SADDU, VIDHANSABHA ROAD, RAIPUR MO. NO. 9425241114

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SS LU/3970

10 M/s. Shri Ram Industries K.V.C.A JenkinsLink Road Janjgir Dst: Janjgir-Champa (CG) 495668 Mob. 9425252556, 9425538021, 9826760349

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRC/3971

11 M/s. Usha Lohari Udyog Vidhan Sabha Road,Village Saddhu Raipur CG Pho.No. 9425241114, 0771-2282349

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972

12 M/s. Raj Industries, Vijyaward Dalpat Sagar Chowk Rammandir , Compoud Jagdalpur Mob-09425261467

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3975

13 M/s. Soumya Advertisers, M-4,Housing Board Coloney , Kota Raipur

15.12.2011 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3976

14 M/S CHHATTISAGRH STEEL INDUSTRIES, BHARDEBHATA KANKER, DIST. KAKER MO. NO. 94252-59199.

14.02.2012 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977

15 M/s Kwality Fabrication Udyog., Near Hero Honda Service, Station Jashpur Nagar Distt.Jashpur (C.G.) Mbl 9754760390,9584050427, 7415523662

14.02.2012 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046

16 M/s. Jaiswal Wooden Industries, Saw mill Area, G.E. Road, Rajnadgaon C.G. 07744- 229105, 229731

14.02.2012 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047

17 M/s. Shyama industries, Gali No. 05, Control Shop, Deepak Nagar, Durg (C.G.) Mob-98271-98885

14.02.2012 to 14.12.2012

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052

(Subas Chandra Bhagat )

I/c Marketing-I

Page 2: Chhattisgarh Road Sign Adv

2/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated :

Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011 To,

M/s. Laxmi Engineering Works plot -45,48 Industrial Area korba Road Champa. Telefax-07819-246021/ Mob-9425223140

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4956 (III) Your Offer acceptance along with undertaking submitted on dated 18.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 3: Chhattisgarh Road Sign Adv

3/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 4: Chhattisgarh Road Sign Adv

4/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Laxmi Engineering Works THE FIRM Plot -45,48 Industrial Area korba Road

Champa. Telefax-07819-246021/ Mob-9425223140

(b) NAME AND FULL ADDRESS OF :- M/s. Laxmi Engineering Works, MANUFACTURER Plot -45,48 Industrial Area korba Road

Champa. Telefax-07819-246021/ Mob-9425223140

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 3. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 5: Chhattisgarh Road Sign Adv

5/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22554700154 Address:-

M/s. Laxmi Engineering Works, Plot -45,48 Industrial Area korba Road Champa. Telefax-07819-246021/ Mob-9425223140

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2008-09 Rs. 3070000

2009-10 Rs. 2560000 2010-11 Rs. 2875000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Janjgir Champa Registration Certificate) Description Capacity/Annum

Road Sign Board 3750 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 6: Chhattisgarh Road Sign Adv

6/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Janjgir Champa EMN No. 220062100179 dated 29.11.2008 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Laxmi Engineering Works, INSPECTION Plot -45,48 Industrial Area korba Road

Champa. Telefax-07819-246021/ Mob-9425223140

(Subas Chandra Bhagat ) I/c Marketing-I

Page 7: Chhattisgarh Road Sign Adv

7/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 8: Chhattisgarh Road Sign Adv

8/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 9: Chhattisgarh Road Sign Adv

9/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 10: Chhattisgarh Road Sign Adv

10/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 11: Chhattisgarh Road Sign Adv

11/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / LEW/3940 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 12: Chhattisgarh Road Sign Adv

12/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011 To,

M/s. PRABHAT GRAPHICS HATRIPARA KAWARDHA Mob. 09425558199

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 5060 (III) Your Offer acceptance along with undertaking submitted on dated 17.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 13: Chhattisgarh Road Sign Adv

13/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 14: Chhattisgarh Road Sign Adv

14/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. PRABHAT GRAPHICS THE FIRM HATRIPARA KAWARDHA

Mob. 09425558199

(b) NAME AND FULL ADDRESS OF :- M/s. PRABHAT GRAPHICS, MANUFACTURER HATRIPARA KAWARDHA

Mob. 09425558199

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 4. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 15: Chhattisgarh Road Sign Adv

15/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed

4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22103603671 Address:-

M/s. PRABHAT GRAPHICS, HATRIPARA KAWARDHA Mob. 09425558199

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2007-08 Rs. 900000

2008-09 Rs. 800000 2009-10 Rs. 1100000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC KAWARDHA Registration Certificate) Description Capacity/Annum

Road Sign Board 10 MT

(Subas Chandra Bhagat ) I/c Marketing-I

Page 16: Chhattisgarh Road Sign Adv

16/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC KAWARDHA EMN No. 220081100686 dated 11.05.2011 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. PRABHAT GRAPHICS, INSPECTION HATRIPARA KAWARDHA

Mob. 09425558199

(Subas Chandra Bhagat ) I/c Marketing-I

Page 17: Chhattisgarh Road Sign Adv

17/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 18: Chhattisgarh Road Sign Adv

18/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 19: Chhattisgarh Road Sign Adv

19/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 20: Chhattisgarh Road Sign Adv

20/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 21: Chhattisgarh Road Sign Adv

21/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / PG/3941 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 22: Chhattisgarh Road Sign Adv

22/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011 To,

M/s. Aman Steel Industries, Sanjay Nagar, Raipur

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4989 (III) Your Offer acceptance along with undertaking submitted on dated 02.11.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 23: Chhattisgarh Road Sign Adv

23/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 24: Chhattisgarh Road Sign Adv

24/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Aman Steel Industries THE FIRM Sanjay Nagar, Raipur

(b) NAME AND FULL ADDRESS OF :- M/s. Aman Steel Industries, MANUFACTURER Sanjay Nagar, Raipur

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 5. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 25: Chhattisgarh Road Sign Adv

25/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22721103155 Address:-

M/s. Aman Steel Industries, Sanjay Nagar, Raipur

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2007-08 Rs. 18798203

2008-09 Rs. 26968790 2009-10 Rs. 7699386

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Raipur Registration Certificate) Description Capacity/Annum

Road Sign Board 150 MT for 6 items

(Subas Chandra Bhagat ) I/c Marketing-I

Page 26: Chhattisgarh Road Sign Adv

26/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur EMN No. 220111101218 dated 03.12.2010 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Aman Steel Industries, INSPECTION Sanjay Nagar, Raipur

(Subas Chandra Bhagat ) I/c Marketing-I

Page 27: Chhattisgarh Road Sign Adv

27/171

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 28: Chhattisgarh Road Sign Adv

28/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 29: Chhattisgarh Road Sign Adv

29/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 30: Chhattisgarh Road Sign Adv

30/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 31: Chhattisgarh Road Sign Adv

31/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ASI/3964 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 32: Chhattisgarh Road Sign Adv

32/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011 To,

M/s. Khandelwal Sales Corporation, Gole Bazer,Bilaspur (C.G.) Mob.No.9425530665

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 5056 (III) Your Offer acceptance along with undertaking submitted on dated 02.11.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 33: Chhattisgarh Road Sign Adv

33/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 34: Chhattisgarh Road Sign Adv

34/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Khandelwal Sales Corporation, THE FIRM Gole Bazer,Bilaspur (C.G.)

(b) NAME AND FULL ADDRESS OF :- M/s. Khandelwal Sales Corporation, MANUFACTURER 13, Tifra Industrial Estate,Bilaspur

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 6. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 35: Chhattisgarh Road Sign Adv

35/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22674101071 Address:-

M/s. Khandelwal Sales Corporation, 13, Tifra Industrial Estate,Bilaspur

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Bilaspur Registration Certificate) Description Capacity/Annum

Road Sign Board 2500 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 36: Chhattisgarh Road Sign Adv

36/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Bilaspur EMN No. 22007110318 dated 23.12.2010 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Khandelwal Sales Corporation, INSPECTION 13, Tifra Industrial Estate, Bilaspur

(Subas Chandra Bhagat ) I/c Marketing-I

Page 37: Chhattisgarh Road Sign Adv

37/171

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 38: Chhattisgarh Road Sign Adv

38/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 39: Chhattisgarh Road Sign Adv

39/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 40: Chhattisgarh Road Sign Adv

40/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 41: Chhattisgarh Road Sign Adv

41/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KS/3965 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 42: Chhattisgarh Road Sign Adv

42/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011 To,

M/s. Shri Shyam Industries, Industries Area, Sirgitti Bilaspur (C.G.) MN-9425220038

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4972 (III) Your Offer acceptance along with undertaking submitted on dated 03.11.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 43: Chhattisgarh Road Sign Adv

43/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 44: Chhattisgarh Road Sign Adv

44/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Shree Shyam Industries, THE FIRM Industries Area,

Sirgitti Bilaspur (C.G.) MN-9425220038

(b) NAME AND FULL ADDRESS OF :- M/s. Shree Shyam Industries, MANUFACTURER Industries Area,

Sirgitti Bilaspur (C.G.) MN-9425220038

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 7. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 45: Chhattisgarh Road Sign Adv

45/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22544203665 Address:-

M/s. Shree Shyam Industries, Industries Area, Sirgitti Bilaspur (C.G.) MN-9425220038

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Bilaspur Registration Certificate) Description Capacity/Annum

Road Sign Board 2000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 46: Chhattisgarh Road Sign Adv

46/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Bilaspur EMN No. 220071100055 dated 22-02-2007 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Shree Shyam Industries, INSPECTION Industries Area, Sirgitti

Bilaspur (C.G.) MN-9425220038

(Subas Chandra Bhagat ) I/c Marketing-I

Page 47: Chhattisgarh Road Sign Adv

47/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 48: Chhattisgarh Road Sign Adv

48/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 49: Chhattisgarh Road Sign Adv

49/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 50: Chhattisgarh Road Sign Adv

50/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 51: Chhattisgarh Road Sign Adv

51/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSI/3966 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 52: Chhattisgarh Road Sign Adv

52/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011 To,

M/s. INTERNATIONAL STEEL INDUSTRY SEMI URBAN INDUSTRIAL AREA BANARAS ROAD AMBIKAPUR SARGUJA (C.G.) Mob-9425420420

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4992 (III) Your Offer acceptance along with undertaking submitted on dated 03.11.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 53: Chhattisgarh Road Sign Adv

53/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 54: Chhattisgarh Road Sign Adv

54/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. INTERNATIONAL STEEL INDUSTRY THE FIRM SEMI URBAN INDUSTRIAL AREA BANARAS ROAD

AMBIKAPUR SARGUJA

(b) NAME AND FULL ADDRESS OF :- M/s. INTERNATIONAL STEEL INDUSTRY MANUFACTURER SEMI URBAN INDUSTRIAL AREA BANARAS ROAD

AMBIKAPUR SARGUJA

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 8. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 55: Chhattisgarh Road Sign Adv

55/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22845004429 Address:- M/s. INTERNATIONAL STEEL INDUSTRY SEMI URBAN INDUSTRIAL AREA BANARAS ROAD AMBIKAPUR SARGUJA

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2007-08 Rs. 2300000 2008-09 Rs. 3400000 2009-10 Rs. 4500000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Ambikapur Registration Certificate) Description Capacity/Annum

Road Sign Board 5000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 56: Chhattisgarh Road Sign Adv

56/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Ambikapur EMN No 220021100274 dated 28-01-2010 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. INTERNATIONAL STEEL INDUSTRY INSPECTION SEMI URBAN INDUSTRIAL AREA BANARAS ROAD

AMBIKAPUR SARGUJA

(Subas Chandra Bhagat ) I/c Marketing-I

Page 57: Chhattisgarh Road Sign Adv

57/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 58: Chhattisgarh Road Sign Adv

58/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 59: Chhattisgarh Road Sign Adv

59/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 60: Chhattisgarh Road Sign Adv

60/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 61: Chhattisgarh Road Sign Adv

61/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / IS/3967 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 62: Chhattisgarh Road Sign Adv

62/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011 To,

M/s Raman Lal Jain Udyog, Industrial Area, Plot No.-14, 15, 16 Vardhman Nagar Rajnandgaon (C.G.) Mob.9424100015

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4868 (III) Your Offer acceptance along with undertaking submitted on dated 18.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 63: Chhattisgarh Road Sign Adv

63/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 64: Chhattisgarh Road Sign Adv

64/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s Raman Lal Jain Udyog, THE FIRM Industrial Area, Plot No.-14, 15, 16 Vardhman

Nagar Rajnandgaon (C.G.)

(b) NAME AND FULL ADDRESS OF :- M/s Raman Lal Jain Udyog, MANUFACTURER Industrial Area, Plot No.-14, 15, 16 Vardhman

Nagar Rajnandgaon (C.G.)

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 9. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 65: Chhattisgarh Road Sign Adv

65/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22713601541 Address:-

M/s Raman Lal Jain Udyog, Industrial Area,Plot No.-14, 15, 16 Vardhman Nagar Rajnandgaon (C.G.)

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2007-08 Rs. 11450200 2008-09 Rs. 8054700 2009-10 Rs. 31100000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Rajnandgaon Registration Certificate) Description Capacity/Annum

Road Sign Board 2250 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 66: Chhattisgarh Road Sign Adv

66/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Rajnandgaon EMN No 220091100177 dated 21.05.2009 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s Raman Lal Jain Udyog, INSPECTION Industrial Area, Plot No.-14, 15, 16 Vardhman

Nagar Rajnandgaon (C.G.)

(Subas Chandra Bhagat ) I/c Marketing-I

Page 67: Chhattisgarh Road Sign Adv

67/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 68: Chhattisgarh Road Sign Adv

68/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 69: Chhattisgarh Road Sign Adv

69/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 70: Chhattisgarh Road Sign Adv

70/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 71: Chhattisgarh Road Sign Adv

71/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RLU/3968 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 72: Chhattisgarh Road Sign Adv

72/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011 To,

M/s. Tanay Enterprises J-2/50, Ravi bhawan Banjari Road Raipur Mob.-9425501393, 98271-49000

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4999 (III) Your Offer acceptance along with undertaking submitted on dated 07.12.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 73: Chhattisgarh Road Sign Adv

73/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 74: Chhattisgarh Road Sign Adv

74/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Tanay Enterprises , THE FIRM J-2/50, Ravi bhawan

Banjari Road Raipur

(b) NAME AND FULL ADDRESS OF :- M/s. Tanay Enterprises , MANUFACTURER Amaseoni, Raipur,Chhattisgarh -492004

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 10. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 75: Chhattisgarh Road Sign Adv

75/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22321104442 Address:-

M/s. Tanay Enterprises, Hotel Centre Point Bldg, Opp. New Bus Stand, Pandri, Raipur,Chhattisgarh -492004

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2009-10 Rs. 5825000 2010-11 Rs. 12853000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Raipur Registration Certificate) Description Capacity/Annum

Road Sign Board 500 PCS

(Subas Chandra Bhagat ) I/c Marketing-I

Page 76: Chhattisgarh Road Sign Adv

76/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur EMN No 220111100884 dated 15.05.2009 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Tanay Enterprises, INSPECTION Amaseoni, Raipur,Chhattisgarh -492004

(Subas Chandra Bhagat ) I/c Marketing-I

Page 77: Chhattisgarh Road Sign Adv

77/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 78: Chhattisgarh Road Sign Adv

78/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 79: Chhattisgarh Road Sign Adv

79/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 80: Chhattisgarh Road Sign Adv

80/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 81: Chhattisgarh Road Sign Adv

81/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / TE/3969 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 82: Chhattisgarh Road Sign Adv

82/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011 To,

M/s S.S. LOHARI UDYOG, Vidhan Sabha Road, Pandri Bus Stand, Raipur (C.G.) MO. NO. 9425241114

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4933 (III) Your Offer acceptance along with undertaking submitted on dated 07.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 83: Chhattisgarh Road Sign Adv

83/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 84: Chhattisgarh Road Sign Adv

84/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s S.S. LOHARI UDYOG, THE FIRM Vidhan Sabha Road,

Pandri Bus Stand,Raipur (C.G.)

(b) NAME AND FULL ADDRESS OF :- M/s S.S. LOHARI UDYOG MANUFACTURER Baloda Bazar Road, Saddu,

Raipur (C.G.)

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 11. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 85: Chhattisgarh Road Sign Adv

85/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22331300037 Address:-

M/s S.S. LOHARI UDYOG, Vidhan Sabha Road,

Pandri Bus Stand,Raipur (C.G.)

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Raipur Registration Certificate) Description Capacity/Annum

Road Sign Board 1400 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 86: Chhattisgarh Road Sign Adv

86/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur 1027018581 dated 27-01-1997 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s S.S. LOHARI UDYOG, INSPECTION Baloda Bazar Road, Saddu,

Raipur (C.G.)

(Subas Chandra Bhagat ) I/c Marketing-I

Page 87: Chhattisgarh Road Sign Adv

87/171

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 88: Chhattisgarh Road Sign Adv

88/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 89: Chhattisgarh Road Sign Adv

89/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 90: Chhattisgarh Road Sign Adv

90/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 91: Chhattisgarh Road Sign Adv

91/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SSLU/3970 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 92: Chhattisgarh Road Sign Adv

92/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011 To,

M/s. Shri Ram Industries K.V.C.A JenkinsLink Road Janjgir Dst: Janjgir-Champa (CG) 495668 Mob. 9425252556, 9425538021, 9826760349

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4931 (III) Your Offer acceptance along with undertaking submitted on dated 05.12.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 93: Chhattisgarh Road Sign Adv

93/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 94: Chhattisgarh Road Sign Adv

94/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Shri Ram Industries THE FIRM K.V.C.A JenkinsLink Road Janjgir

Dst: Janjgir-Champa (CG) 495668

(b) NAME AND FULL ADDRESS OF :- M/s. Shri Ram Industries, MANUFACTURER K.V.C.A JenkinsLink Road Janjgir

Dst: Janjgir-Champa (CG) 495668

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 12. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 95: Chhattisgarh Road Sign Adv

95/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22864701584 Address:-

M/s. Shri Ram Industries, K.V.C.A JenkinsLink Road Janjgir Dst: Janjgir-Champa (CG) 495668

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Janjgir-Champa Registration Certificate) Description Capacity/Annum

Road Sign Board 2550 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 96: Chhattisgarh Road Sign Adv

96/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Janjgir-Champa EMN No. 220060101018 dt 19.03.2007 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Shri Ram Industries INSPECTION K.V.C.A JenkinsLink Road Janjgir

Dst: Janjgir-Champa (CG) 495668

(Subas Chandra Bhagat ) I/c Marketing-I

Page 97: Chhattisgarh Road Sign Adv

97/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 98: Chhattisgarh Road Sign Adv

98/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 99: Chhattisgarh Road Sign Adv

99/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 100: Chhattisgarh Road Sign Adv

100/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 101: Chhattisgarh Road Sign Adv

101/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SRI/3971 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 102: Chhattisgarh Road Sign Adv

102/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011 To,

M/s. Usha Lohari Udyog Vidhan Sabha Road, Village Saddhu Raipur CG Pho.No. 9425241114, 0771-2282349

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4949 (III) Your Offer acceptance along with undertaking submitted on dated 17.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 103: Chhattisgarh Road Sign Adv

103/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 104: Chhattisgarh Road Sign Adv

104/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Usha Lohari Udyog THE FIRM Vidhan Sabha Road,

Village Saddhu Raipur CG

(b) NAME AND FULL ADDRESS OF :- M/s. Usha Lohari Udyog MANUFACTURER Vidhan Sabha Road,

Village Saddhu Raipur CG

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 13. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 105: Chhattisgarh Road Sign Adv

105/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22701700007 Address:- M/s. Usha Lohari Udyog Vidhan Sabha Road, Village Saddhu Raipur CG

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2008-09 Rs. 135900 2009-10 Rs. 159000 2010-11 Rs. 185000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Raipur Registration Certificate) Description Capacity/Annum

Road Sign Board 20000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 106: Chhattisgarh Road Sign Adv

106/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur EMN No. 220111101321 dt 03.05.2011 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Usha Lohari Udyog INSPECTION Vidhan Sabha Road,

Village Saddhu Raipur CG

(Subas Chandra Bhagat ) I/c Marketing-I

Page 107: Chhattisgarh Road Sign Adv

107/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 108: Chhattisgarh Road Sign Adv

108/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 109: Chhattisgarh Road Sign Adv

109/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 110: Chhattisgarh Road Sign Adv

110/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 111: Chhattisgarh Road Sign Adv

111/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / ULU/3972 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 112: Chhattisgarh Road Sign Adv

112/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011 To,

M/s. Raj Industries, Vijyaward Dalpat Sagar Chowk Rammandir , Compoud Jagdalpur Mob-09425261467

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4876 (III) Your Offer acceptance along with undertaking submitted on dated 17.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 113: Chhattisgarh Road Sign Adv

113/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 114: Chhattisgarh Road Sign Adv

114/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Raj Industries, THE FIRM Vijay ward, Dalpat Sagar Chowk, Rammandir,

Compoud, Jagdalpur(CG) 494001

(b) NAME AND FULL ADDRESS OF :- M/s. Raj Industries,, MANUFACTURER Vijay ward, Dalpat Sagar Chowk, Rammandir,

Compoud, Jagdalpur(CG) 494001

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 14. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 115: Chhattisgarh Road Sign Adv

115/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if Applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22162301898 Address:- M/s. Raj Industries, Vijay ward, Dalpat Sagar Chowk, Rammandir, Compoud, Jagdalpur(CG) 494001

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2007-08 Rs. 4000000 2008-09 Rs. 5000000 2009-10 Rs. 5500000

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Jagdalpur Registration Certificate) Description Capacity/Annum

Road Sign Board 225 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 116: Chhattisgarh Road Sign Adv

116/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Jagdalpur EMN No 22015110188 dated 26-08-2010 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Raj Industries, INSPECTION Vijay ward, Dalpat Sagar Chowk, Rammandir,

Compoud, Jagdalpur(CG) 494001

(Subas Chandra Bhagat ) I/c Marketing-I

Page 117: Chhattisgarh Road Sign Adv

117/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 118: Chhattisgarh Road Sign Adv

118/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 119: Chhattisgarh Road Sign Adv

119/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 120: Chhattisgarh Road Sign Adv

120/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 121: Chhattisgarh Road Sign Adv

121/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / RI/3975 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 122: Chhattisgarh Road Sign Adv

122/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011 To,

M/s. Soumya Advertisers, M-4,Housing Board Coloney , Kota Raipur Mob.9300414688, 9301912779, 9329521904

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 15.12.2011 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4966 (III) Your Offer acceptance along with undertaking submitted on dated 05.12.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 123: Chhattisgarh Road Sign Adv

123/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 124: Chhattisgarh Road Sign Adv

124/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Soumya Advertisers THE FIRM M-4,Housing Board Coloney ,

Kota Raipur

(b) NAME AND FULL ADDRESS OF :- M/s. Shri Satya Sai Engineering Works MANUFACTURER Hirapur Raipur 9329477466

2. VALIDITY OF RATE CONTRACT :- From 15.12.2011 to 14.12.2012 15. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 125: Chhattisgarh Road Sign Adv

125/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22261505182 Address:-

M/s. Soumya Advertisers, M-4,Housing Board Coloney , Kota Raipur

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2009-10 Rs. 2807899 2008-09 Rs. 2807899

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Raipur Registration Certificate) Description Capacity/Annum

Road Sign Board 3000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 126: Chhattisgarh Road Sign Adv

126/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur EMN No. 220111100976 dt 14.09.2009 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Shri Satya Sai Engineering Works INSPECTION Hirapur Raipur

(Subas Chandra Bhagat ) I/c Marketing-I

Page 127: Chhattisgarh Road Sign Adv

127/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 128: Chhattisgarh Road Sign Adv

128/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 129: Chhattisgarh Road Sign Adv

129/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 130: Chhattisgarh Road Sign Adv

130/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 131: Chhattisgarh Road Sign Adv

131/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SA/3976 Dated: 15.12.2011

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 132: Chhattisgarh Road Sign Adv

132/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012 To,

M/S CHHATTISAGRH STEEL INDUSTRIES, BHARDEBHATA KANKER, DIST. KAKER MO. NO. 94252-59199.

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 14.02.2012 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4947 (III) Your Offer acceptance along with undertaking submitted on dated 05.12.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 133: Chhattisgarh Road Sign Adv

133/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 134: Chhattisgarh Road Sign Adv

134/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Chhattisgarh Steel Industries THE FIRM Bardebhantha Kanker Distt.-Kanker, C.G.

(b) NAME AND FULL ADDRESS OF :- M/s. Chhattisgarh Steel Industries MANUFACTURER Bardebhantha Kanker Distt.-Kanker, C.G.

2. VALIDITY OF RATE CONTRACT :- From 14.02.2012 to 14.12.2012 16. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 135: Chhattisgarh Road Sign Adv

135/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22402304579 Address:-

M/s. Chhattisgarh Steel Industries, Bardebhantha Kanker Distt.-Kanker, C.G

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Kanker Registration Certificate) Description Capacity/Annum

Road Sign Board 1500 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 136: Chhattisgarh Road Sign Adv

136/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Kanker EMN -220141100049 dt 07.02.2007 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Chhattisgarh Steel Industries INSPECTION Bardebhantha Kanker Distt.-Kanker, C.G.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 137: Chhattisgarh Road Sign Adv

137/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 138: Chhattisgarh Road Sign Adv

138/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 139: Chhattisgarh Road Sign Adv

139/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 140: Chhattisgarh Road Sign Adv

140/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 141: Chhattisgarh Road Sign Adv

141/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / Ch.SI/3977 Dated: 14.02.2012

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 142: Chhattisgarh Road Sign Adv

142/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012 To,

M/s Kwality Fabrication Udyog., Near Hero Honda Service, Station Jashpur Nagar Distt.Jashpur (C.G.) Mbl 9754760390, 9584050427, 7415523662

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 14.02.2012 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 5034 (III) Your Offer acceptance along with undertaking submitted on dated 04.01.2012

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 143: Chhattisgarh Road Sign Adv

143/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 144: Chhattisgarh Road Sign Adv

144/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s Kwality Fabrication Udyog., THE FIRM Near Hero Honda Service,

Station Jashpur Nagar Distt.Jashpur (C.G.)

(b) NAME AND FULL ADDRESS OF :- M/s Kwality Fabrication Udyog., MANUFACTURER Near Hero Honda Service,

Station Jashpur Nagar Distt.Jashpur (C.G.)

2. VALIDITY OF RATE CONTRACT :- From 14.02.2012 to 14.12.2012 17. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 145: Chhattisgarh Road Sign Adv

145/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if applicable 6. SALES TAX /VAT : Extra if applicable

TIN No. 22934904130 Address:-

M/s Kwality Fabrication Udyog., Near Hero Honda Service, Station Jashpur Nagar Distt.Jashpur (C.G.)

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Jashpur Registration Certificate) Description Capacity/Annum

Road Sign Board 2000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 146: Chhattisgarh Road Sign Adv

146/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Jashpur EMN No 220031100028 dated 17-09-2008 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s Kwality Fabrication Udyog., INSPECTION Near Hero Honda Service,

Station Jashpur Nagar Distt.Jashpur (C.G.)

(Subas Chandra Bhagat ) I/c Marketing-I

Page 147: Chhattisgarh Road Sign Adv

147/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 148: Chhattisgarh Road Sign Adv

148/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 149: Chhattisgarh Road Sign Adv

149/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 150: Chhattisgarh Road Sign Adv

150/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 151: Chhattisgarh Road Sign Adv

151/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / KF/4046 Dated: 14.02.2012

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 152: Chhattisgarh Road Sign Adv

152/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012 To,

M/s. Jaiswal Wooden Industries, Saw mill Area, G.E. Road, Rajnadgaon C.G. 07744- 229105, 229731

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 14.02.2012 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4859 (III) Your Offer acceptance along with undertaking submitted on dated 17.10.2011

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 153: Chhattisgarh Road Sign Adv

153/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 154: Chhattisgarh Road Sign Adv

154/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Jaiswal Wooden Industries, THE FIRM Saw mill Area, G.E. Road,Rajnadgaon C.G.

07744- 229105, 229731

(b) NAME AND FULL ADDRESS OF :- M/s. Jaiswal Wooden Industries, MANUFACTURER Saw mill Area, G.E. Road,Rajnadgaon C.G.

07744- 229105, 229731

2. VALIDITY OF RATE CONTRACT :- From 14.02.2012 to 14.12.2012 18. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 155: Chhattisgarh Road Sign Adv

155/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22843602585 Address:-

M/s. Jaiswal Wooden Industries, Saw mill Area, G.E. Road, Rajnadgaon C.G.

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Rajnandgaon Registration Certificate) Description Capacity/Annum

Road Sign Board 1000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 156: Chhattisgarh Road Sign Adv

156/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Rajnandgaon EMN No 220091100123 dated 05-09-2008 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Jaiswal Wooden Industries, INSPECTION Saw mill Area, G.E. Road,

Rajnadgaon C.G.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 157: Chhattisgarh Road Sign Adv

157/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 158: Chhattisgarh Road Sign Adv

158/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 159: Chhattisgarh Road Sign Adv

159/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 160: Chhattisgarh Road Sign Adv

160/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 161: Chhattisgarh Road Sign Adv

161/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / JWI/4047 Dated: 14.02.2012

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 162: Chhattisgarh Road Sign Adv

162/171 Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) LIC Campus, Pandri Raipur 492 004 (C.G) Phone 91-771-2583789-90, Fax : 91-771-2583794, 4091879 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/ PS- II / 10-11/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012 To,

M/s. Shyama industries, Gali No. 05, Control Shop, Deepak Nagar, Durg (C.G.) Mob- 98271-98885

Sub :- Rate Contract for the supply of Item Road Sign Board (Valid From dated 14.02.2012 to 14.12.2012) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/ PS- II /56/202

(II) Bid No. 4866 (III) Your Offer acceptance along with undertaking submitted on dated 18.01.2012

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2 . The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction . You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED : 1. Schedule “A” Description of Stores, Prices, Duties/Taxes . 2. Annexure -“A” Technical Particulars of Item Road Sign Board 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 10 pages

Yours faithfully,

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser named in CSIDC Form No.2

Page 163: Chhattisgarh Road Sign Adv

163/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha ,Raipur .

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur .

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel.

5. All The Collectors ,Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd., for further approval of authorized pre dispatch Inspection Agency enlisted in the CSIDC panel

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control .

7. (i) M.D. C.G. Tourism Board. (ii) Principal Chief Conservator of Forest, Aranya Bhawan Raipur C.G

(iii) The Commissioner , Local Administrator , RDA Building Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur .

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .

8. (i) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (ii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iii) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (iv) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (v) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

11. Main file of Item- Road Sign Board

(Subas Chandra Bhagat ) I/c Marketing-I

For and on behalf of the purchaser Named in CSIDC Form No.2

Page 164: Chhattisgarh Road Sign Adv

164/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Road Sign Board as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF :- M/s. Shyama industries, THE FIRM Gali No. 05, Control Shop,

Deepak Nagar, Durg (C.G.)Mob 98271-98885

(b) NAME AND FULL ADDRESS OF :- M/s. Shyama industries, MANUFACTURER Gali No. 05, Control Shop,

Deepak Nagar, Durg (C.G.) Mob 98271-98885

2. VALIDITY OF RATE CONTRACT :- From 14.02.2012 to 14.12.2012 19. DESCRIPTION OF ITEM- Road Sign Board , SPECIFICATION, UNIT RATE AS BELOW

S.No.

Item Code No. Item Description Class Rate FOR Destination ED & VAT Extra

Rs. / Each Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The

Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001080, RSB19F0001081)

1 RSB19F0001080 I 90 cm High Octagon 1404.00 2 RSB19F0001081 II 60 cm high Octagon 1177.20 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001082)

3 RSB19F0001082 (i) 60 cm diameter Circle/ Each 784.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001083)

4 RSB19F0001083 (i) 90 cm Equilateral Triangle 1479.60 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet.

The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom (as below RSB19F0001086, RSB19F0001089, RSB19F0001090)

5 RSB19F0001086 (ii) 800mmX600mm 864.00 6 RSB19F0001089 (v) 1600mmX1200mm 1866.24 7 RSB19F0001090 (vii) 2400mmX1200mm 2099.52

(Subas Chandra Bhagat )

I/c Marketing-I

Page 165: Chhattisgarh Road Sign Adv

165/171

Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made

from 1.6 mm thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001096, RSB19F0001097)

8 RSB19F0001096 (i) 90 cm high Octagon 1566.00 9 RSB19F0001097 (ii) 60 cm high Octagon/ Each 979.56 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S.

Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board (as below RSB19F0001098)

10 RSB19F0001098 (i) 60 cm Diameter Circle/ Each 892.08 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm

thick M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. (as below RSB19F0001099, RSB19F0001100)

11 RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each 1399.68 12 RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each 738.72

Note :- Technical particulars as per Annexure A enclosed 4. TERMS OF DELIVERY : F. O. R Destination ( Any where in C.G.State ) 5. EXCISE DUTY : Extra if applicable 6. SALES TAX /VAT : Extra if applicable

Tin No. 22693103166 Address:-

M/s. Shyama industries,, Gali No. 05, Control Shop,Deepak Nagar, Durg (C.G.) 98271-98885

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : NM

b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (as per DTIC Durg Registration Certificate) Description Capacity/Annum

Road Sign Board 2000 Nos

(Subas Chandra Bhagat ) I/c Marketing-I

Page 166: Chhattisgarh Road Sign Adv

166/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Durg EMN -220101100122 dated 16-03-2007 14 BIS LICENSE : NM 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate .

17 INSPECTION AUTHORITY : Accorded by CSIDC Ltd. While receipt of copy of purchase Order(Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

18 QUALITY ASSURANCE: a)Accorded by CSIDC Ltd. While receipt of copy of purchase

Order (Indent) in Favour of authorized pre dispatched Inspection Agency enlisted in the CSIDC panel prior to submission of application from the Rate Contract Holders.

b)Post-dispatch inspection by the committee constituted by

the Direct Demanding Officers /Purchase Department . OR

Post Dispetch Inspection of Stores carried by the Inspection Agency enlisted in the CSIDC prior to receiving of proposal from the end user/Purchase Department.

19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s. Shyama industries, INSPECTION Gali No. 05, Control Shop,

Deepak Nagar, Durg (C.G.) 98271-98885

(Subas Chandra Bhagat ) I/c Marketing-I

Page 167: Chhattisgarh Road Sign Adv

167/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract , CSIDC Form No. 1, Clause

7, the Purchaser / DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note 1. Purchasing Departments will ensure pre dispatch inspection of Materials. 2. Purchasing Departments will be responsible for ensuring the Quality of accepted materials. 3. Purchasing Departments will ensure sending copy of every order to this office.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 168: Chhattisgarh Road Sign Adv

168/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

Annexure - “A”

Technical Specification of Road Sign Board Technical Specifications Schedule II: Non Reflective Boards: 1. All boards shall confirm to IRC: 67-2001 and the amendments in it till date. 2. Road Signs are broadly classified as : A. Mandatory / Regulatory Signs. B. Cautionary/ Warning Signs. C. Informatory Signs General Requirements: 1. Design: The Design, Size, shape, colour, Visibility of signs & borders etc. shall be as per IRC: 67-2001, “Code of practice for Road Signs”. 2. Size of Letters: The size and shape of letters, numerals used on Road sign Boards Shall be as detailed in IRC: 30-1968. “Standard letters and numerals of different heights for use on highway signs” 3. Material for sign / sign Posts: All the sign/sign Posts shall be made of Mild Steel Sheets / suitable mild steel sections conforming to Grade FE 410W A of IS 2062/1999. 4. Colour for Sign/ Sign Posts: Signs shall be painted in colours as shown in detailed drawings given in IRC: 67-2001. The back side of the sign plates shall be painted grey. The Sign Posts shall be painted in 250 mm wide bands alternately black and white. The lowest band next to the ground shall be in black.Colours shall comply with the shades given in IS:5. 5. Sizes of Signs: Size of the sign shall be as per IRC 67:2001 or as specified by the end customer. 6. Fabrication: The road sign boards shall be made from 1.6mm thick M.S. Sheet. The sign boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should shall be minimum 2350mm+ Height of the board. The sign boards more then 1 square meter size shall be mounted. On two posts.+ The detailed specifications for the Non reflective road sign boards are given below. They should confirm to the IRC 67: 2001.

S.No. Type Shape Size Stop Sign Octagonal Height of octagon:900mm/600mm Prohibitory Circular Diameter of the sign:600mm Cautionary signs Equilateral Triangle Size of each triangle:900mm/600mm Give Way Signs Equilateral Triangle Size of each triangle:900mm/600mm Place

Identification Boards/ Facility Information Boards

Rectangular 800mmX600 mm or 600mmX450 mm

Advance Direction Boards/Junction Boards

Rectangular 1200X900 mm 1600C1200 mm 1800C1200 mm

Parking Signs Rectangular 600X600 mm Other Boards Rectangular Various sizes calculated in SQM.

(M.A. Ansari )

Incharge PS-II

Page 169: Chhattisgarh Road Sign Adv

169/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

Non-Reflective Boards:

Item Code No. Item Description Class Unit Schedule -II Non Reflective Boards 1. Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. the steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001080 I 90 cm High Octagon Each RSB19F0001081 II 60 cm high Octagon Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminum Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001082 (i) 60 cm diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001083 (i) 90 cm Equilateral Triangle Each 4. Rectangular Boards: Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign Boards

shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board. Boards larger than 1 sqm area should be mounted on two posts with a cross bracing at the bottom

RSB19F0001086 (ii) 800mmX600mm Each RSB19F0001089 (v) 1600mmX1200mm Each RSB19F0001090 (vii) 2400mmX1200mm Each 1. Partially Reflective Boards:1Stop Sign (Octagonal): Painted Sign Board Made from 1.6 mm thick

M.S. Sheet. The Sign Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001096 (i) 90 cm high Octagon Each RSB19F0001097 (ii) 60 cm high Octagon/ Each Each 2. Prohibitory Sign (Circular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board

RSB19F0001098 (i) 60 cm Diameter Circle/ Each Each 3. Cautionary Sign (Triangular): Painted Sign Board Made from 1.6 mm thick M.S. Sheet. The Sign

Boards shall be painted with two coats of synthetic enamel paint as per IRC: 67-2001. The sign shall be welded to the sign post or fixed to the frame of 25X25X3 through Aluminium Rivets and subsequently attached to the sign post through steel bolts. The steel posts should be angle of 75X75X6 mm duly inflated at the bottom as holdfast. The total height of the post shall be minimum 2350 mm+ Height of the board.

RSB19F0001099 (i) 90 cm Equilateral Triangle/ Each Each RSB19F0001100 (ii) 60 cm Equilateral Triangle/ Each Each

(M.A. Ansari )

Incharge PS-II

Page 170: Chhattisgarh Road Sign Adv

170/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

----------------NIL-----------------

(Subas Chandra Bhagat ) I/c Marketing-I

Page 171: Chhattisgarh Road Sign Adv

171/171 Rate Contract No. CSIDC/MKD/ PS- II /56/202/ RSB / SI/4052 Dated: 14.02.2012

SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.

(Subas Chandra Bhagat ) I/c Marketing-I

Page 172: Chhattisgarh Road Sign Adv

172/171