chemical equilibrium chemistry 100. the concept a condition of balance between opposing physical...
TRANSCRIPT
Chemical EquilibriumChemical Equilibrium
Chemistry 100
The conceptThe concept
A condition of balance between opposing physical forces
A state in which the influences or processes to which a thing is subject cancel one another and produce no overall change
Oxford English Dictionary
Static and DynamicStatic and Dynamic
A book sitting on a desk is in static equilibrium; The book remains at rest; its position is
constant. The moon circles the earth.
There is movement but the (average) distance between the two is unaltered. This is dynamic equilibrium.
EquilibriumEquilibrium
The molecules of A are able to turn into molecules of B
The rate at which this happens is
proportional to [A].
Ratefor = kfor[A]
Likewise, if B can turn into A, then
Raterev = krev[B]
The Equilibrium ConditionThe Equilibrium Condition
Start with pure A. [A] decreases and [B] increases as A turns into B
What happens to the rate at which A turns into B, and the rate at which B turns into A? The rate of A B decreases, while BA increases
What eventually happens? Rate of A B = Rate B A
Ratefor = Raterev kfor[A] = krev[B]
Time
Concentration A
B
Time
Rate
A
B
The Equilibrium Condition #2
And then what?And then what?
We have as an equilibrium condition
kfor[A] = krev[B]
eq
rev
for Kkk
AB
Keq the thermodynamic equilibrium constant
The Meaning of [B]/[A] = KThe Meaning of [B]/[A] = K
K is a constant number such as 2.3, 0.65, etc
What the equilibrium expression means is: No matter how much A or B we start with,
when the system reaches equilibrium
[A][B]
Keq
Reversible reactionsReversible reactions
If these two reactions are possible A B and B A,
we have a reversible reaction A ⇌ B Here is a real reversible reaction
N2(g) +3H2(g) ⇌ 2NH3(g)
Equilibrium can be reached from Equilibrium can be reached from either sideeither side
At start PH2
= 3; PN2 = 1; PNH3
=
0
At start PH2
= 0; PN2 = 0; PNH3
=2
Law of Mass ActionLaw of Mass ActionExpression for KExpression for K
For the reactionaA (g) + bB (g) ⇌ pP (g) + qQ (g)
riumat equilib pressures partial the are
.. ,P,P where QP
bB
aA
pP
eqPP
PPK
Examples of KExamples of Keqeq
22 ClrB
2BrCl
eq PPP
K
3HN
2NH
eq
22
3
PP
PK
N2(g) +3H2(g) ⇌ 2NH3(g)
Br2(g) +Cl2(g) ⇌ 2BrCl(g)
21
OSO
SOeq
22
3
PP
PK SO2(g) +½O2(g) ⇌ SO3(g)
Magnitude of KMagnitude of Keqeq
2 HI(g) ⇌ H2(g) + I2(g) Keq = 0.016
The magnitude (size) of Keq provides information K >> 1 the products are favoured K << 1 the reactants are favoured
CO(g) + Cl2(g) ⇌ COCl2(g) Keq= 4.57109 Equilibrium lies far to the right - there is very little CO
and Cl2 in the equilibrium mixture.
Heterogeneous EquilibriumHeterogeneous Equilibrium
When the substances in the reaction are in the same phase (e.g., all gases), reactions are termed homogeneous equilibria.
When different phases are present, we speak of heterogeneous equilibrium.
We will look at reactions involving gases and solids, and gases and liquids
Solids do not appear in KSolids do not appear in Keqeq Examine the reaction
CaCO3(s) CaO(s) + CO2(g)
][CaCO
[CaO]PK
3
COeq
2
For a pure solid X (or liquid X) [X] = density/molar mass.
Note molar mass and density are intensive properties!! [X] = constant
2CO'eqeq
2eq PK
1constant 2constant
Kor 2][constant
]1][CO[constant K
Heterogeneous EquilibriumHeterogeneous Equilibrium
At a given temperature, the equilibrium between CaCO3(s), CaO(s), and CO2(g) yields the same concentration (same partial pressure) of CO2(g).
True as long as all three components are present.
2COeq P K
Note that it does not matter how much of the two solids are present; we just need some.
More heterogeneous equilibriaMore heterogeneous equilibria
CO2(g) + H2(g) ⇄CO(g) + H2O(l)
SnO2(s) + 2CO(g) ⇄ Sn(s) + 2CO2(g)
22 HCO
COeq PP
P K
2CO
2CO
eq P
P K 2
KKeqeq values for forward and values for forward and
reverse reactionsreverse reactions For the reaction
2 HI(g) ⇌ H2(g) + I2(g), Keq = 0.016 What is Keq for H2(g) + I2(g) ⇌ 2HI(g) ? Call the first reaction (F) and the second (R)
22
22
IH
2HIR
eq2HI
IHFeq PP
PK and
P
PPK
Forward and Reverse (II)Forward and Reverse (II)
62.5 0.016
1K so
K1
Kor 1K K
Req
Feq
Req
Feq
Req
An asideAn aside
For the equilibrium H2O(l) ⇌ H2O(g), write down the expression for Keq.
OHeq 2PK
When liquid water and water vapour are in equilibrium the vapour has a fixed pressure
at a given temperature!
ApplicationsApplications
For a given reaction, Keq has a set value for a given temperature
eq
bB
aA
pP
eqPP
PPK
PP
PPQ b
Ba
A
pP
Q depends on the experimental conditions
Q = Keq at equilibrium
Summary of the Q and KSummary of the Q and Keqeq
storystory
When Q > Keq reaction shifts left When Q = Keq equilibrium
When Q < Keq reaction shifts right
Applications (II)Applications (II)
Equilibrium is approachable from either side of the reaction.
Other ApplicationsOther Applications
Obtaining the equilibrium constant from the measured equilibrium concentrations
Calculating the composition of the equilibrium system (i.e., concentration of products and reactants at equilibrium) have the concentration of all but one component
at equilibrium and the value of Keq
given initial amounts of reactants and the equilibrium constant
Le Châtelier’s PrincipleLe Châtelier’s Principle
Perturb a system at equilibrium Change in temperature, pressure, or the
concentration of a component The system will shift its equilibrium position so
as to counteract the disturbance. The effect of the last two disturbances (change
in pressure and change in concentration) can also be be predicted by the Law of Mass Action
Changing concentration (I)Changing concentration (I)
Examine the system
2 NO2Cl(g) ⇌ 2 NO2(g) + Cl2(g) Introduce a small amount of substance
X that reacts with Cl2 to make XCl.
The value of PCl2 has been decreased
Le Châtelier’s Principle predicts that more NO2Cl will react to increase PCl2
Changing concentration (II)Changing concentration (II)
At equilibrium
2.11(0.0212)
)108.0((0.216)
P
PP K 2
2
2ClNO
Cl2NO
eq
2
22
Remove Cl2 - the new value of PCl2 is 0.05
atm2.5
(0.0212))05.0((0.216)
P
PP Q
2
2
2ClNO
Cl2NO
2
22
Q is now smaller than Keq. The reaction moves to the right to increase Qeq. Same
prediction!
Changing concentration (III)Changing concentration (III)
CaCO3(s) ⇌ CaO(s) + CO2(g)
If we have this system in equilibrium and add either CaCO3(s) or CaO(s), there will be no effect on the equilibrium.
Changing the concentrationChanging the concentration
Changing pressure (I)Changing pressure (I)
2 NO2Cl(g) ⇌ 2 NO2(g) + Cl2(g) Increase the pressure in the system by
making the vessel smaller. Note that there are a total of 3 moles on
the right of the reaction and 2 on the left. The left “takes up less space”
Le Châtelier’s Principle predicts that the species on the left will react to form more NO2Cl.
Changing pressure (II)Changing pressure (II)
2 NO2Cl (g) 2 NO2 (g) + Cl2 (g) System is initially at equilibrium. Increase the pressure by making the
vessel smaller. We could use the Keq expression to
predict what happens but Le Châtelier’s Principle is much easier to use!
Cautionary NoteCautionary Note
Le Châtelier’s Principle predicts what occurs when we change the partial pressure of one or more of the species in the reaction
Change the total pressure by adding/removing an inert gas (not involved in the reaction)
NO EFFECT ON THE EQUILIBRIUM
More pressure changesMore pressure changes
Predict what happens N2(g) + 3H2(g) ⇌ 2NH3(g); total pressure
is decreased
Reaction shifts to left; more moles on left H2(g) + I2(g) ⇌ 2HI(g); total pressure is
increased
No effect; 2 moles on each side
What is Heat - not a What is Heat - not a substance!substance!
Some textbooks Heat is treated as a chemical reagent when
applying Le Châtelier’s Principle to change of temperature problems.
Treating heat as a substance can lead to confusion. There is a better way!
Changing the temperatureChanging the temperature
An exothermic reaction causes an increase in temperature. The reverse causes cooling.
Warm up an exothermic reaction Le Châtelier’s Principle predicts the system
will move in the direction that will bring the temperature back down The direction that cools. So the reverse reaction
() occurs
Changing TemperatureChanging Temperature
N2O4(g) 2 NO2(g) H = 58.0 kJ The forward reaction is endothermic
Absorbs heat. Decrease the temperature - reaction shifts to
the left Brings T back up.
If we increase the temperature, opposite effect Reaction takes in heat and lower the temperature
Temperature and KTemperature and Keqeq
Endothermic reactions – increasing temperature increases the value of the equilibrium constant!
Exothermic reactions – increasing temperature decreases the value of the equilibrium constant!
Temperature changes are the only stresses on the systems that change the numerical
values of Keq
Temperature and KTemperature and Keqeq (II) (II)
Co(H2O)62+(aq)+ 4 Cl- (aq) ⇌ CoCl42- (aq) + 6 H2O (l)
∆H> 0
Catalyst does NOT change KCatalyst does NOT change K
A catalyst speeds up a reaction by providing and alternate reaction pathway with a lower Ea.
Reversible reaction the forward and backward reactions have their
Ea’s changed by the same amount.
Keq is not altered.
A catalyst cannot alter K!! Otherwise we would be able to build a perpetual
motion machine!!