chemical anchoring chemset anchor
DESCRIPTION
RAMSET Chemical Anchor CatalogueTRANSCRIPT
98 www.ramset.com.au 1300 780 063
ChemSet™ AnchorSteel Threaded Studs
DescriptionChemSet™ Anchor Studs are made from Grade 5.8 carbon steel to get the most out of adhesive tensile capacities and provide higher shear capacities than regular Grade 4.6 grade studs. Galvanising of ChemSet Anchor Studs meets Australian Standards. Stainless Steel ChemSet™ Anchor Studs are high corrosion resistant AISI 316 (A4).
Features and Benefits• High Performance Grade 5.8 Carbon Steel• Zinc Plated for indoor or dry climates• Hot dip galvanised to AS1650 and AS1214• Hot dip galvanised to 42 micron for exterior applications• High Performance AISI316 Stainless Steel for Coastal Applications• Pre-cut to standard chemical anchoring lengths• Supplied with nuts and washers• Depth set mark to ensure correct embedment• Reliable external hex drive for installing capsules• Ramset™ Quality
Chem
Set™
Anch
or Fi
s
Depth set mark for accurate embedment
High quality zinc plating and galvanising to Australian standards
External hex drive• Reliable socket fit• Does not collect water
Heavy Duty Grade 5.8 carbon steel or
AISI Grade 318 stainless Bevelled tip• Releases trapped air• Prevents unthreading
SpecificationMaterial - Bolt Carbon Steel, Stainless Steel 316 (A4)Corrosion Protection Zinc Plating, Hot Dipped GalvanisingHead Styles Hex NutFixing Method Through FixtureSetting Method ChemicalAnchoring Method ChemicalThread Diameters M8, M10, M12, M16, M20, M24Anchor/Hole Diameters 10mm, 12mm, 14mm, 18mm, 24mm, 26mmAnchor Lengths 110mm, 130mm, 160mm, 190mm, 260mm, 300mmMaximum Fixture Thickness’ 15mm, 25mm, 30mm, 50mm, 40mm, 45mm, 80mm, 90mm, 105mmSubstrates Concrete, Solid Brickwork
Related ProductsDynaDrill™ Carbide Drill BitsDiamond MotorDiamond Core Drill Bits
Impact WrenchWet/Dry VacuumHole Cleaning BrushesHole Cleaning Pump
www.ramset.com.au 1300 780 063 99
ChemSet™ AnchorSteel Threaded Studs
ChemSet™ Anchor Studs - Typical PropertiesSee working loads of each anchoring adhesive in previous pages
Thread Size
Overall Length, L (mm)
Effective Length, Le
(mm)
Max Fixture Thickness, t
(mm)
Yield Strength, fy
(MPa)
Carbon Steel UTS, fu
(MPa)
Yield Strength, fy
(MPa)
Stainless Steel UTS, fu
(MPa)
Section Modulus, Z
(mm3)M8 110 95 15 430 540 450 650 31.2M10 130 115 25 430 540 450 650 62.3M12 160 140 30 430 540 450 650 109.2M12 180 160 50 430 540 450 650 109.2M16 190 165 40 420 520 450 650 277.5M20 260 225 80 420 520 450 650 540.9M24 300 265 105 420 520 450 650 935.5
InstallationSee recommendations for each ChemSet™ anchoring adhesive on previous pages.
ChemSet ™
Anchor Fixings
ChemSet™ Anchor StudsDescription Part No Box QuantityChemSet™ Anchor Stud M8 x 110 Zinc CS08110 10ChemSet™ Anchor Stud M8 x 110 Galvanised CS08110GH 10ChemSet™ Anchor Stud M8 x 110 Stainless CS08110SS 10ChemSet™ Anchor Stud M10 x 130 Zinc CS10130 10ChemSet™ Anchor Stud M10 x 130 Galvanised CS10130GH 10ChemSet™ Anchor Stud M10 x 130 Stainless CS10130SS 10ChemSet™ Anchor Stud M12 x 160 Zinc CS12160 10ChemSet™ Anchor Stud M12 x 160 Galvanised CS12160GH 10ChemSet™ Anchor Stud M12 x 160 Stainless CS12160SS 10ChemSet™ Anchor Stud M12 x 180 Zinc CS12180 10
ChemSet™ Anchor Stud M16 x 190 Zinc CS16190 10ChemSet™ Anchor Stud M16 x 190 Galvanised CS16190GH 10ChemSet™ Anchor Stud M16 x 190 Stainless CS16190SS 10ChemSet™ Anchor Stud M20 x 260 Zinc CS20260 6ChemSet™ Anchor Stud M20 x 260 Galvanised CS20260GH 6ChemSet™ Anchor Stud M20 x 260 Stainless CS20260SS 6ChemSet™ Anchor Stud M24 x 300 Zinc CS24300 6ChemSet™ Anchor Stud M24 x 300 Galvanised CS24300GH 6ChemSet™ Anchor Stud M24 x 300 Stainless CS24300SS 6
Description Part No Box Quantity
Trades & ApplicationsBuilding
ContractorSteel Fabricator Balustrade
ContractorBricklayer Fitter Seating
ContractorFacade
Contractor
Machinery hold down
4
Structural steel connections
4
Seating 4 4
Hand rails 4 4 4
Fencing 4 4 4
The design engineer should ensure the structural element is capable of supporting these loads.Refer to Ramset™ Specifiers Resource Book for more information or explanation of technical data.
Other sizes and steel types available on request. (Maybe subject to lead time)