chemical anchoring accessories
TRANSCRIPT
-
8/12/2019 Chemical Anchoring Accessories
1/2106 www.ramset.com.au 1300 780 063
AccessoriesChemical Anchoring
ChemSetAnc
horingAccessories
ChemSetUniversal ApplicatorDispenses all of the products in the ChemSetInjection Range
Robust all-metal construction
Twin drive for powerful dispensing
ChemSetPneumatic Powered ApplicatorEffortless dispensing of all products in the ChemSetInjection range
Powered by compressed air
Reduces fatigue when dispensing a large number of cartridges
Suitable ChemSetCartridgesPack Size Product Part Number
380ml ChemSet 101 C101C, ISKP, ISKPT
380ml ChemSet 801 C801C
750ml ChemSet 101 C101J
750ml ChemSet 801 C801J
750ml ChemSet Reo502 RE0502J
Suits all ChemSet
injection adhesives
CUA
CUAPN
Chemical
Anchoring Kit
Part No. CHEMKITBAG
Key Features 5.25kN (525kgf) thrust at 6.8 bar
operating pressure
Maximum air pressure inlet: 100psi
Inlet: Max 150 litres/minute (5 cfm)
-
8/12/2019 Chemical Anchoring Accessories
2/2 www.ramset.com.au 1300 780 063 107
Hole Cleaning AccessoriesCleaning dust and debris from holes is necessary to obtain full adhesion and load capacity from Chemical Anchors.
Ramsetprovides a full range of hole cleaning accessories to ensure the best results from RamsetChemical Anchoring products To remove dust and debris after drilling
Removing dust ensures rated load capacities are achieved
Mixing NozzlesAlways use recommended mixing nozzles for each adhesive. Using the incorrect nozzle will result in improper mixing and poor load resistance.
Description Length Length with Extension
Epoxy Mixing Nozzles 255mm 440mm
Fast Dispensing Epoxy Nozzles - Turbo 440mm -
Polyester Mixing Nozzles 215mm -
Description To Suit Part Number Pack Quantity
Epoxy Mixing Nozzles C801C, C801J, REO502J, S401C ISNE 5Fast Dispensing Epoxy Nozzles - Turbo C801C, C801J, REO502J ISNET 5
Polyester Mixing Nozzles C101C, C101J, ISKP, S401C
UFP300, UFP300P
ISNP 5
AccessoriesChemical Anchoring
ChemSet
AnchoringAccessories
Description To Suit Part Number Pack Quantity
Hole Cleaning Pump (Blower) All hole sizes HCP 1
Hole Cleaning Pump (High Volume) All hole sizes HCPHV 1
Hole Cleaning Brush 13 mm 8 12 mm Diameter Holes HCBT13 1
Hole Cleaning Brush 20 mm 14 20 mm Diameter Holes HCBT20 1
Hole Cleaning Brush 26 mm 20 24 mm Diameter Holes HCBT26 1
ISNP ISNE ISNET
HCPHCPHVHCBT13, HCBT20, HCBT26
Retaining Collars for Overhead Applications in Solid Materials Prevents drip in overhead installations
Description Part Number To Suit Pack Quantity
10mm Retaining Collar ISR10 CS10130 100
12mm Retaining Collar ISR12 CS12160 100
16mm Retaining Collar ISR16 CS16190 100
Longer brushes for deep holes available on request.