chem oil - check valve.pdf

STANDARD PORTCLASS 800

BOLTED COVERHALF STELLITE TRIMCONFORM TO API 602

THREADS CONFORM TO ASME B1.20.1 (NPT)

STANDARD PORTCLASS 800

BOLTED COVERHALF STELLITE TRIMCONFORM TO API 602

THREADS CONFORM TO ASME B1.20.1 (NPT)

FORGED STEEL PISTON CHECK VALVESERIES: COP871

SPECIFICATIONS

DIMENSIONS

FORGED STEEL SWING CHECK VALVESERIES: COP876

DIMENSIONS

SPECIFICATIONS

PART MATERIAL1 BODY FORGED CARBON STEEL ASTM A 1052 COVER FORGED CARBON STEEL ASTM A 1053 BOLT ALLOY STEEL ASTM A193-B74 GASKET GRAPHITE5 DISC SATINLESS STEEL6 SEAT INTEGRAL + HF

PART MATERIAL1 BODY FORGED CARBON STEEL ASTM A 1052 COVER FORGED CARBON STEEL ASTM A 1053 BOLT ALLOY STEEL ASTM A193-B74 GASKET GRAPHITE5 DISC SATINLESS STEEL6 SEAT RING SATINLESS STEEL7 SUPPORTER SATINLESS STEEL8 HINGE PIN SATINLESS STEEL9 HINGE SATINLESS STEEL

NPS PART # A B C3/8" COP871T03 2.40

3.110.39

1/2" COP871T04 2.403.62

0.513/4" COP871T05 3.07

4.370.69

1" COP871T06 3.314.72

0.911 1/4" COP871T07 4.06

5.981.18

1 1/2" COP871T08 4.656.77

1.382" COP871T09 5.20 1.81

* Due to the continuous development of our products, design or construction may change without prior notice

NPS PART # A B C1/2" COP876T04 2.40 3.11 0.413/4" COP876T05 2.40 3.62 0.531" COP876T06 3.07 4.37 0.71

1 1/4" COP876T07 3.31 4.72 0.941 1/2" COP876T08 3.31 4.72 1.14

2" COP876T09 4.72 5.51 1.44

www.swagelok.com

Check Valves

C, CA, CH, CP, and CPA Ser ies Working pressures up to 6000 psig (413 bar)

Adjustable and fixed cracking pressures

Variety of end connections

316 stainless steel and brass materials
http://www.swagelok.com

2 Check Valves

Features

CPA Series

CA Series

CP Series

CH Series

Fully contained

O-ring seal

Adjustable spring

Adjusting screw sets cracking pressure

Compact, one-piece body

Locking screw maintains setting

Fully contained O-ring seal

Adjustable spring

Adjusting screw sets cracking pressure

Locking screw maintains settings

Compact, one-piece body

Fully contained O-ring seal

Poppet with bonded

elastomer seal

Poppet stop

O-ring seals body halves Backup ring supports O-ring

Contents

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Pressure-Temperature Ratings . . . . . . . . . . . . . . . . . . . . 3

Cracking and Reseal Pressures . . . . . . . . . . . . . . . . . . . 4

Materials of Construction . . . . . . . . . . . . . . . . . . . . . . . . 5

Flow Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cleaning and Packaging . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ordering Information and Dimensions . . . . . . . . . . . . . . 11

Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . 14

Fixed Cracking Pressures

From 1/3 to 25 psi (0.03 to 1.8 bar)

Adjustable Cracking Pressures

From 3 to 600 psi (0.21 to 41.4 bar)

O-ring seals body halves Poppet

Spring

C Series

Check Valves 3

For cracking pressure of 25 psi (1.8 bar), downstream pressure is 3000 psig (206 bar).

Technical Data Cracking pressurethe upstream pressure at which the first indication of flow occurs.

Reseal pressurethe pressure at which there is no indication of flow.

Pressure-Temperature Ratings

C (2C, 4C, 6C, and 8C), CA, CP, and CPA Series Ratings based on fluorocarbon FKM O-rings in 316 stainless steel valves and Buna N in brass valves.

CH SeriesRatings based on fluorocarbon FKM seals.

C Series (12C and 16C)Ratings based on fluorocarbon FKM O-rings in 316 stainless steel valves and Buna N in brass valves.

For more information about pressure ratings of valves with tube fitting end connections, see Swagelok Tubing Data, MS-01-107. Pressure ratings may be limited by the end connection. See

Dimensions, page 12.

For valves not actuated for a period of time, initial cracking pressure may be higher than the set cracking pressure.

Series

Maximum Flow Coefficient

(Cv)

Nominal Cracking Pressure

psi (bar)

Downstream Pressure at 70F (20C) psig (bar)

Fixed Cracking Pressure

2C 0.10

1/3, 1, 10 and 25 (0.03, 0.07, 0.69, and 1.8)

1000 (68.9) 4C 0.47

6C 1.47

200 (13.7) 8C 1.68

12C, 16C 4.48

CH4 0.67 1/3, 1, 5, 10 and 25 (0.03, 0.07, 0.35 0.69, and 1.8)

6000 (413) CH8 1.8

CH16 4.7 5000 (344)

4CP 0.35 1/3, 1, 10 and 25 (0.03, 0.07, 0.69, and 1.8) 3000 (206) 8CP 1.20

Adjustable Cracking Pressure

CA 0.37 3 to 50 (0.21 to 3.5) 50 to 150 (3.5 to 10.4)

150 to 350 (10.4 to 24.2) 350 to 600 (24.2 to 41.4)

3000 (206) 4CPA 0.35

8CPA 1.20

Material 316 SS Brass

Temperature, F (C) Working Pressure, psig (bar) 10 (23) to 100 (37) 200 (93) 250 (121) 300 (148) 375 (190)

3000 (206) 2575 (177) 2450 (168) 2325 (160) 2185 (150)

3000 (206) 2600 (179) 2405 (165)

Material 316 SS Brass


2000 (137) 1715 (118) 1630 (112) 1545 (106) 1450 (99.9)

1500 (103) 1300 (89.5) 1200 (82.6)

Material 316 SS

Series CH4, CH8 CH16


6000 (413) 5160 (355) 4910 (338) 4660 (321) 4280 (294)

5000 (344) 4290 (295) 4080 (281) 3875 (266) 3560 (245)

4 Check Valves

Cracking and Reseal Pressures at 70F (20C) Cracking pressurethe upstream pressure at which the first indication of flow occurs.

Reseal pressurethe pressure at which there is no indication of flow.

C Series

CA and CPA Series

CH Series

Cracking Pressure, psi

Cracking Pressure, bar

Res

eal P

ress

ure,

psi

Res

eal P

ress

ure,

bar

Back Pressure

For valves not actuated for a period of time, initial cracking pressure may be higher than the set cracking pressure.

CP Series

CA - CP SERIES CRACKING PRESSURE FLOW CURVES N-ELD-0823

USA

100 200 250 350 450400 500 600550300150500

0 4 8 12 16 20 24 28 32 36 40

0

3.4

4

8

12

16

20

24

28

32

36

40

50

50

100

200

250

300

350

450

400

500

550

600

150

0

390

450

EURO

3,4

100 200 250 350 450400 500 600550300150500

0 4 8 12 16 20 24 28 32 36 40

0

4

8

12

16

20

24

28

32

36

40

50

50

100

200

250

300

350

450

400

500

550

600

150

0

28

32

CHINA

3.4

100 200 250 350 450400 500 600550300150500

0 4 8 12 16 20 24 28 32 36 40

0

4

8

12

16

20

24

28

32

36

40

28

32

0

0.34

0.4

0.8

1.2

1.6

2.0

2.4

2.8

3.2

3.6

4.0

JAPAN

0.340 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0

0

0.4

0.8

1.2

1.6

2.0

2.4

2.8

3.2

3.6

4.0

2.8

3.2


psi (bar)

Cracking Pressure Range

psi (bar)

Reseal Pressure

psi (bar)

1/3 (0.03) Up to 3 (0.21) Up to 6 (0.42) downstream pressure

1 (0.07) Up to 4 (0.28) Up to 6 (0.42) downstream pressure

10 (0.69) 7 to 15 (0.49 to 1.1)

3 (0.21) or more upstream pressure

25 (1.8) 20 to 30 (1.4 to 2.1)



psi (bar)


psi (bar)

Reseal Pressure

psi (bar)

1/3 (0.03) Up to 3 (0.21) Up to 6 (0.42) back pressure

1 (0.07) Up to 4 (0.28) Up to 5 (0.35) back pressure

5 (0.35) 3 to 9 (0.21 to 0.63)

Up to 2 (0.14) back pressure

10 (0.69) 7 to 15 (0.49 to 1.1)


25 (1.8) 20 to 30 (1.4 to 2.1)



psi (bar)


psi (bar)

Reseal Pressure

psi (bar)

1/3 (0.03) Up to 3 (0.21) 6 to 20 (0.42 to 1.4) downstream pressure

1 (0.07) Up to 4 (0.28) 5 to 20 (0.35 to 1.4) downstream pressure

10 (0.69) 7 to 13 (0.49 to 0.90)

3 to 10 (0.21 to 0.69) downstream pressure

25 (1.8) 21 to 29 (1.5 to 2.0)


Warranty InformationSwagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative.

Check Valves 5

Wetted components listed in italics.

Materials of Construction

C and CA Series

12C Series shown

Wetted components listed in italics. Material Safety Data Sheet for bonding agent

available on request.

1

4

2

5

6

11

1 23

4

56

7

CH SeriesCA Series

1

4

2

3

5

6

7

8

9

10

11

Component

Valve Body Materials

316 SS Brass

Material Grade/ASTM Specification

1 Inlet body 316 SS/A479 Brass 360/B16

2 Inlet gasket (CA series)

Inlet gasket (6C and 8C series with 50 psi [3.5 bar] spring)

Inlet gasket (12C and 16C series)

PTFE-coated 316 SS/A240



PTFE-coated aluminum/B209

3 Insert (CA series) 316 SS/A479 Naval brass 485/B21

4 O-ring Fluorocarbon FKM Buna N

5 Poppet 316 SS/A479 Brass 360/B16

6 Spring 302 SS/A313

7 Center body (CA series) 316 SS/A479 Brass 360/B16

8 Adjusting screw (CA series) 316 SS/A276

9 Locking screw (CA series)

10 Outlet gasket (CA series) PTFE-coated 316 SS/A240

11 Outlet body 316 SS/A479 Brass 360/B16

Lubricants

Silicone-based and molybdenum disulfide-based

(C series); PTFE-based and

molybdenum disulfide-based

(CA series)

Silicone-based (C series);

PTFE-based (CA series)

Component Material Grade/

ASTM Specification

1 Inlet body 316 SS/A479

2 Poppet Fluorocarbon FKM-bonded 316 SS/A479

3 Poppet stop 316 SS/A240


5 O-ring Fluorocarbon FKM

6 Backup ring PTFE/D1710

7 Outlet body 316 SS/A479

Lubricant Fluorocarbon-based

6 Check Valves

CPA Series

1 2 3 4 56

Wetted components listed in italics. Adjusting screw in valve with 150 or 350 psi (10.4 or 24.2 bar) spring is 316 SS.

1 2 3 4 56

7 8

Materials of Construction

CP Series

Component

Valve Body Materials

316 SS

Brass

4CP 8CP 4CPA 8CPA

Material Grade/ASTM Specification

1 Insert lock screw 316 SS/A276 or A479 Brass 485/ B21

Brass 360/ B16

Brass 485/ B21

Brass 360/ B16 2 Insert 316 SS/A479

3 O-ring Fluorocarbon FKM Buna N

4 Poppet 316 SS/A479 Brass 360/B16


6 Body 316 SS/A479 Brass 360/B16

7 Adjusting screw (CPA series) 316 SS/A276 316 SS/A276 Brass 360

/ B16 8 Locking screw (CPA series)

Lubricants PTFE-based

Check Valves 7

USA

EURO

JAPAN

C- SERIES 12C/16C AIRFLOW CURVE N-ELD-0471

00

020 40 60 80

20

2.0

1.0

3.0

5.0

4.0

40

60

80400 800 1200 1600 2000 2400 2800

100

0

0

0 20 40 60 80 100

400 800 1200 1600 2000 2400 280000

20

40

60

80

2,0

1,0

3,0

5,0

4,0

400 800 1200 1600 2000 2400 280000

0.1

0.2

0.3

0.4

0.5

USA

EURO

JAPAN

C- SERIES 6C-8C WATERFLOW CURVE N-ELD-0473

0 0

10

20

2.0

1.0

3.0

30

40

50

0

0 4.0 8.0 12 16 20

1.0 2.0 3.0 5.04.0 6.0

0 0

0 4,0 8,0 12 16 20

0 1,0 2,0 3,0 5,04,0 6,0

10

20

30

40

50

2,0

1,0

3,0

00 4.0 8.0 12 16 20

0.1

0.2

0.3

USA

EURO

JAPAN

C- SERIES 12C WATERFLOW CURVE N-ELD-0474

0 0

20

30

10

20 40 60 80

2.0

1.0

400

0 5.0 10 15 20 25

0 020 40 60 800

0 5,0 10 15 20 25

20

30

10

40

2,0

1,0

20 40 60 8000

0.1

0.2

USA

EURO

JAPAN

C- SERIES 2C-4C AIRFLOW CURVE N-ELD-0469

00 0

5 10 15 20

20

2.0

1.0

3.0

5.0

4.0

6.0

40

60

80

100100 200 300 400 500 600 700

25

0

0

1,0

3,0

5,0

0 5 10 15 20 25

100 200 300 400 500 600 700

20

40

60

80

100

00

2,0

4,0

6,0

0 100 200 300 400 500 600 7000

0.1

0.2

0.3

0.4

0.5

0.6

Air

2C, 4C Series

Water

2C, 4C Series

USA

EURO

JAPAN

C- SERIES 2C-4C WATERFLOW CURVE N-ELD-0472

000

0.5 1.0 1.5 2.0

20

2.0

1.0

3.0

5.0

4.0

40

60

802.0 3.01.0 4.0 5.0 7.06.00

03,01,0 5,0 7,0

0

02,0 4,0 6,00

0,5 1,0 1,5 2,0

20

40

60

80

2,0

1,0

3,0

5,0

4,0

3.01.0 5.0 7.00

0 2.0 4.0 6.0

0.1

0.2

0.3

0.4

0.5

Air Flow, std ft3/min

Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar

Water Flow, U.S. gal/min

Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar

Flow Data at 70F (20C)

C Series

Nominal Cracking Pressures25 psi (1.8 bar)10 psi (0.69 bar)1 psi (0.07 bar)2C, 6C, 16C Series

25 psi (1.8 bar)10 psi (0.69 bar)1 psi (0.07 bar)4C, 8C Series

2C Series

4C Series

2C Series

4C Series

USA

EURO

JAPAN

C- SERIES 6C-8C AIRFLOW CURVE N-ELD-0470

0 020 40 60 80

20

2.0

1.0

3.0

5.0

4.0

6.0

40

60

80

100400 800 1200 1600 2000 2400 2800

100

0

0

400 800 1200 1600 2000 2400 28000

20 40 60 80 1000

0 0

20

40

60

80

100

2,0

1,0

3,0

5,0

4,0

6,0

400 800 1200 1600 2000 2400 280000

0.1

0.2

0.3

0.4

0.5

0.6

6C, 8C Series 6C, 8C Series


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar

6C Series

8C Series6C Series

8C Series

16C Series 16C Series


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar

8 Check Valves

10 20

20

40

60

80

100

200 400 600 800 1000 1200 1400

120

140

30 40 500 0

2.0

1.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

0

0

U.S.A.

0200 400 600 800 1000 1200 14000

10 20 30 40 500

20

40

60

80

100

120

140

0

2,0

1,0

3,0

4,0

5,0

6,0

7,0

8,0

9,0

EURO.

CHINA.

200 400 600 800 1000 1200 14000

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

200 400 600 800 1000 1200 14000

10 20 30 40 500

0

2.0

1.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

JAPAN

CH SERIES-CH4 AIR FLOW CURVES N-ELD-0475

Air

CH4 Series

Water

CH4 Series

20

40

60

80

00.5 1.0 1.5 2.0

0

2.0

1.0

3.0

4.0

5.0

0

0

1.0 2.0 3.0 4.0 5.0 6.0 7.0

U.S.A.

0

2,0

1,0

3,0

4,0

5,0

0,5 1,0 1,5 2,00

0 1,0 2,0 3,0 4,0 5,0 6,0 7,0

20

40

60

80

0

EURO

CHINA

00 1.0 2.0 3.0 4.0 5.0 6.0 7.0

0.1

0.2

0.3

0.4

0.5

0

2.0

1.0

3.0

4.0

5.0

0.5 1.0 1.5 2.00

0 1 2 3 4 5 6 7

0

0.1

0.2

0.3

0.4

0.5

JAPAN

CH SERIES-CH4 WATER FLOW CURVES N-ELD-0478


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar


CH Series

Nominal Cracking Pressures

25 psi (1.8 bar)10 psi (0.69 bar)1 psi (0.07 bar)

20 40

20

40

60

80

100400 800 20001600 24001200 2800

60 80 1000 0

2.0

1.0

3.0

4.0

5.0

6.0

0

0

U.S.A.

0400 800 20001600 24001200 28000

20 40 60 80 1000

20

40

60

80

100

0

2,0

1,0

3,0

4,0

5,0

6,0

EURO

400 800 20001600 24001200 280000

0.1

0.2

0.3

0.4

0.5

0.6

400 800 20001600 24001200 28000

20 40 60 80 1000

0

2.0

1.0

3.0

4.0

5.0

6.0

0

0.1

0.2

0.3

0.4

0.5

0.6

JAPAN CHINA


CH8 Series CH8 Series

10

20

30

40

50

00 1.0 2.0 3.0 4.0

4.0 8.0 12 16 20

5.0 6 0

2.0

3.0

1.0

1.5

2.5

0.5

0

U.S.A.


0 1,0 2,0 3,0 4,0 5,0 6,0

0 04,0 8,0 12 16 200

10

20

30

40

50

2,0

3,0

1,0

1,5

2,5

0,5

EURO

CHINA

4.0 8.0 12 16 2000

0.05

0.10

0.15

0.20

0.25

0.30

0 1.0 2.0 3.0 4.0 5.0 6 .0

4.0 8.0 12 16 2000

2.0

3.0

1.0

1.5

2.5

0.5

0

0.05

0.10

0.15

0.20

0.25

0.30

JAPAN


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar

20 40

20

40

60

80400 800 20001600 24001200 2800

60 80 1000 0

2.0

1.0

3.0

4.0

5.0

0

0

U.S.A.

0

2,0

1,0

3,0

4,0

5,0

400 800 20001600 24001200 28000

20 40 60 80 1000

20

40

60

80

0

EURO

CHINA

400 800 20001600 24001200 280000

0.1

0.2

0.3

0.4

0.5

0

2.0

1.0

3.0

4.0

5.0

400 800 20001600 24001200 28000

20 40 60 80 1000

0

0.1

0.2

0.3

0.4

0.5

JAPAN


CH16 Series CH16 Series

5.0 10

10

20

30

40

15 20

20 40 60 80

250 0

0.5

1.0

1.5

2.0

2.5

0

0

U.S.A.


0

5,0 10 15 20 250

10

20

30

40

020 40 60 800

0,5

1,0

1,5

2,0

2,5

EURO

CHINAJAPAN

020 40 60 800

0.05

0.10

0.15

0.20

0.25

020 40 60 800

5.0 10 15 20 250

0.5

1.0

1.5

2.0

2.5

0

0.05

0.10

0.15

0.20

0.25


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

--P

ress

ure

Dro

p,

psi

Pre

ssur

e D

rop

, b

ar

Check Valves 9

USA EURO

JAPAN

CA SERIES AIR FLOW CURVES N-ELD-0252

0

0

0

100

200

300

400

500

600

700

800

20 40 60 80 100

10

0

20

30

40

50

400 800 20001600 24001200 2800

100

200

300

400

500

600

700

800

10

0

20

30

40

50

0 20 40 60 80 100

00 400 800 20001600 24001200 2800

1

2

3

4

5

10

20

30

40

50

0 20 40 60 80 100

00 400 800 20001600 24001200 2800

0

1.0

2.0

3.0

4.0

5.0

00 400 800 20001600 24001200 2800

0

EURO

Air

CA Series

Water

CA Series

USA

CA SERIES WATER FLOW CURVES N-ELD-0253

00.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8

0

0

100

200

300

400

500

600

2.0

10

0

20

30

40

2.0 4.0 6.0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,80 2,0

00 2,0 4,0 6,0

100

200

300

400

500

600

10

0

20

30

40

00 2.0 4.0 6.0

1.0

2.0

3.0

4.0

EURO

0.2 0.4 0.6 0.8 1.0 1.2 1.4 1,6 1.80 2.0

00 2.0 4.0 6.0

10

20

30

40

1.0

2.0

3.0

4.0

0

CHINAJAPAN


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar


CA and CPA Series

USA EURO

JAPAN

CPA SERIES AIR FLOW CURVES 4CPA N-ELD-0655

0

0

0

100

200

300

400

500

600

700

800

20 40 60 80 100

10

0

20

30

40

50

400 800 20001600 24001200 2800

100

200

300

400

500

600

700

800

10

0

20

30

40

50

0 20 40 60 80 100

0

0 400 800 20001600 24001200 2800

1.0

2.0

3.0

4.0

5.0

10

20

30

40

50

0 20 40 60 80 100

0

0 400 800 20001600 24001200 2800

0

1.0

2.0

3.0

4.0

5.0

0

0 400 800 20001600 24001200 2800

CHINA

4CPA Series 4CPA Series

USA

CPA SERIES WATER FLOW CURVES 4CPA N-ELD-0654

00.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8

0

0

100

200

300

400

500

600

2.0

10

0

20

30

40

2.0 4.0 6.0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,80 2,0

0

0 2,0 4,0 6,0

100

200

300

400

500

600

10

0

20

30

40

0 2.0 4.0 6.0

1.0

2.0

3.0

4.0

EURO

0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.80 2.0

0

0 2.0 4.0 6.0

10

20

30

40

1.0

2.0

3.0

4.0

0

CHINAJAPAN


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar

1.0

2.0

3.0

4.0

5.0

10

20

30

40

50

0 20 40 60 80 100

0

0 400 800 20001600 24001200 2800

0

100

200

300

400

500

600

700

800

10

0

20

30

40

50

0 20 40 60 80 100

0

0 400 800 20001600 24001200 2800

1.0

2.0

3.0

4.0

5.0

0

0 400 800 20001600 24001200 2800

USA EURO

JAPAN

CPA SERIES AIR FLOW CURVES 8CPA N-ELD-0657

CHINA

0

0

0

100

200

300

400

500

600

700

800

20 40 60 80 100

10

0

20

30

40

50

400 800 20001600 24001200 2800

8CPA Series 8CPA Series

CPA SERIES WATER FLOW CURVES 8CPA N-ELD-0656

USA

0 1,0 2,0 3,0 4,0 5,0 6,0

4,0 8,0 12 16 2000

100

200

300

400

500

600

10

0

20

30

40

4.0 8.0 12 16 2000

1.0

2.0

3.0

4.0

EURO

0 1.0 2.0 3.0 4.0 5.0 6.0

4.0 8.0 12 16 2000

10

20

30

40

1.0

2.0

3.0

4.0

0

CHINAJAPAN

0

100

200

300

400

500

600

10

0

20

30

40

0 1.0 2.0 3.0 4.0

4.0 8.0 12 16 20

5.0 6.0

0


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar


350 psi (24.2) bar)150 psi (10.4 bar)50 psi (3.5 bar)3 psi (0.21 bar)

10 Check Valves

4CP Air Flow

0

100

0 200

0 400 800150 10

100 200 300 500 600 700

5.0 10 15 25 30

0 205,0 10 15 25 30

25

50

75

125

2.0

4.0

6.0

8.0

0

100

0

15010

0 400 800100 200 300 500 600 700

25

50

75

125

2,0

4,0

6,0

8,0

0

1.0

0 400 800100 200 300 500 600 700

0.2

0.4

0.6

0.8

USA

EURO

JAPAN

N-ELD-0810Air

4CP Series

Water

4CP Series4CP Water Flow

USA

EURO

00

0.40.2 1.6 1.8 2.0

1.0

3.0

4.0

5.0

0

100

20

40

60

80

0 4.01.0 2.0 3.0 5.0 6.0 7.0

2.0

6.0

0.80.6 1.0 1.2 1.4

0 0,40,2 1,6 1,8 2,00,80,6 1,0 1,2 1,4

0

100

20

40

60

80

0 4,01,0 2,0 3,0 5,0 6,0 7,00

1,0

3,0

4,0

5,0

2,0

6,0

JAPAN

N-ELD-0811

0 4.01.0 2.0 3.0 5.0 6.0 7.00

0.1

0.3

0.4

0.5

0.2

0.6


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar


CP Series


25 psi (1.8 bar)10 psi (0.69 bar)1 psi (0.07 bar)

0 20 3010 40 50 60 70 80 90 100

0 20 3010 40 50 60 70 80 90 100

0 400 800 1200 1600 2000 2400 2800

0 400 800 1200 1600 2000 2400 2800

8CP Air Flow

0

1.0

3.0

4.0

5.0

100

20

40

60

80

2.0

6.0

0

0

1,0

3,0

4,0

5,0

100

20

40

60

80

2,0

6,0

0

USA

EURO

JAPAN

0 400 800 1200 1600 2000 2400 28000

0.1

0.3

0.4

0.5

0.2

0.6

N-ELD-8128CP Series 8CP Series8CP Water Flow

0 1.0 2.0 3.0 4.0

0 12 16 208.04.0

0 12 16 208,04,0

0

100

150

25

50

75

125

0

10

2.0

4.0

6.0

8.0

5.0 6.0

0 1,0 2,0 3,0 4,0 5,0 6,0

0

100

150

25

50

75

125

0

10

2,0

4,0

6,0

8,0

0 12 16 208.04.00

1.0

0.2

0.4

0.6

0.8

USA

EURO

JAPAN

N-ELD-813


Air Flow, std L/min

Inle

t P

ress

ure,

psi

g

Inle

t P

ress

ure,

bar


Water Flow, L/min

Pre

ssur

e D

rop

, p

si

Pre

ssur

e D

rop

, b

ar

TestingEvery C, CA, CH, CP, and CPA series check valve is factory tested for crack and reseal performance with a liquid leak detector.

Check valves with fixed cracking pressures, C, CP, and CH series, are cycled six times prior to testing. Every valve is tested to ensure it seals within 5 s at the appropriate reseal pressure.

Check valves with adjustable cracking pressures, CA and CPA series, are tested at two pressure points. Every valve is tested at a low-pressure setting. Ten percent of the valves in each order are tested at the high-pressure setting. All valves must seal within 5 s at the appropriate reseal pressure.

Cleaning and PackagingEvery C, CA, and CH series check valve with VCR or VCO end connections is processed in accordance with Swagelok Special Cleaning and Packaging (SC-11), MS-06-63, to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C.

All other C, CA, and CH series check valves, as well as every CP and CPA series check valve, are cleaned to Swagelok standard cleaning and packaging specification (SC-10), MS-06-62.

Check Valves 11

C SERIES CHECK VALVE N-ELD- 468

CA SERIES CHECK VALVE N-ELD-165DimensionsDimensions, shown with Swagelok tube fitting nuts finger-tight, are for reference only and are subject to change.

Ordering InformationBasic ordering numbers specify stainless steel material. To order brass, replace SS with B in the basic ordering number.

Example: B-2C-

C SeriesTo order, add a cracking pressure designator to the basic ordering number.

Example: SS-2C-1/3

CA SeriesTo order, add a cracking pressure range designator to the basic ordering number.

Example: SS-4CA-3

A

B flat

C flat

C Series CA SeriesA

B flat

C flat

End Connections Basic

Ordering Number Series

Dimensions, in. (mm)

Inlet/Outlet Size A B C

Fixed Cracking Pressure, C Series

Fractional Swagelok

tube fittings

1/8 in. SS-2C- 2C 2.19 (55.6) 5/8

7/16

1/4 in. SS-4C- 4C 2.35 (59.7) 9/16

3/8 in. SS-6C- 6C 3.17 (80.5) 7/8

11/16

1/2 in. SS-8C- 8C 3.42 (86.9) 7/8

3/4 in. SS-12C- 12C 4.32 (110) 1 1/4 1 1/8

1 in. SS-16C- 16C 4.74 (120) 1 3/8 1 1/2

Metric Swagelok

tube fittings

6 mm SS-6C-MM- 4C 2.36 (59.9) 5/8 (14)

10 mm SS-10C-MM-8C

3.32 (84.3) 7/8

(19)

12 mm SS-12C-MM- 3.42 (86.9) (22)

Female NPT

1/8 in. SS-2C4- 2C 1.89 (48.0) 5/8

1/4 in. SS-4C4- 4C 2.15 (54.6) 3/4

3/8 in. SS-6C4- 6C 2.98 (75.7) 7/8

1/2 in. SS-8C4- 8C 3.58 (90.9) 1 1/16

3/4 in. SS-12C4- 12C 4.08 (104) 1 1/4

1 in. SS-16C4- 16C 4.84 (123) 1 5/8

Male NPT

1/8 in. SS-2C2- 2C 1.71 (43.4) 5/8

1/4 in. SS-4C2- 4C 2.09 (53.1)

3/8 in. SS-6C2- 6C 2.78 (70.6) 7/8

1/2 in. SS-8C2- 8C 3.16 (80.3)

3/4 in. SS-12C2- 12C 4.08 (104) 1 1/4

1 in. SS-16C2- 16C 4.52 (115) 1 5/8

Male NPT/ Swagelok tube

fitting 1/4 in. SS-4C1- 4C 2.22 (56.4) 5/8 9/16

Male VCR fittings

1/4 in. SS-4C-VCR- 4C 2.21 (56.1) 5/8

1/2 in. SS-8C-VCR- 8C 3.56 (90.4) 15/16

3/4 in. SS-12C-VCR- 12C 4.64 (118) 1 5/8

1 in. SS-16C-VCR- 16C 4.76 (121)

Adjustable Cracking Pressure, CA Series

Swagelok tube fittings

1/4 in. SS-4CA-

CA

3.23 (82.0)

5/8

9/16

6 mm SS-6CA-MM- (14)

8 mm SS-8CA-MM- 3.32 (84.3) (16)

Male NPT/ Swagelok tube fitting

1/4 in. SS-4CA1- 3.12 (79.2) 9/16

Male VCR fittings 1/4 in. SS-4CA-VCR- 3.09 (78.5)

Cracking Pressure psi (bar) Designator

1/3 (0.03) 1/3

1 (0.07) 1

10 (0.69) 10

25 (1.8) 25


3 to 50 (0.21 to 3.5) 3

50 to 150 (3.5 to 10.4) 50

150 to 350 (10.4 to 24.2) 150

350 to 600 (24.2 to 41.4) 350

Check valves are designed for directional flow control only. Swagelok check valves should never be used as code safety relief devices.

Check Valves 12

CH Series

CH SERIES CHECK VALVE N-ELD-0192B

See specifications ISO 7/1, BS EN 10226-1, DIN-2999, JIS B0203.

Ordering InformationTo order, add a cracking pressure designator to the basic ordering number.

Example: SS-CHS2-1/3

DimensionsDimensions, shown with Swagelok tube fitting nuts finger-tight, are for reference only and are subject to change.


A

B flat

End Connections

Pressure Rating at 100F (37) psig (bar)

Basic Ordering Number Series

Dimensions in. (mm)

Type Size A B

Fractional Swagelok tube fitting

1/8 in.

6000 (413)

SS-CHS2-CH4

2.27 (57.7) 11/16

1/4 in. SS-CHS4- 2.43 (61.7)

3/8 in. SS-CHS6-CH8

2.75 (69.9) 1

1/2 in. SS-CHS8- 2.96 (75.2)

3/4 in. 5000 (344) SS-CHS12-CH16

3.52 (89.4) 1 5/8

1 in. 4700 (323) SS-CHS16- 3.88 (98.6)

Metric Swagelok tube fitting

6 mm

6000 (413)

SS-CHS6MM- CH4 2.43 (61.7) 11/16

8 mm SS-CHS8MM-

CH8

2.70 (68.6)

110 mm SS-CHS10MM- 2.80 (71.1)

12 mm SS-CHS12MM- 2.96 (75.2)

22 mm 5000 (344)

SS-CHS22MM-CH16

3.48 (88.4) 1 5/8

25 mm SS-CHS25MM- 3.88 (98.6)

Female NPT

1/4 in. 6000 (413) SS-CHF4- CH4 2.13 (54.1) 11/16

3/8 in. 5000 (344) SS-CHF6-CH8

2.55 (64.8) 1

1/2 in. 4600 (316) SS-CHF8- 3.03 (77.0) 1 1/16

3/4 in. 4300 (296) SS-CHF12-CH16

3.23 (82.0) 1 5/8

1 in. 4100 (282) SS-CHF16- 3.83 (97.3)

Male NPT

1/8 in.

6000 (413)

SS-CHM2-CH4

1.79 (45.5) 11/16

1/4 in. SS-CHM4- 2.17 (55.1)

3/8 in. SS-CHM6-CH8

2.36 (59.9) 1

1/2 in. SS-CHM8- 2.73 (69.3)

3/4 in. 5000 (344)

SS-CHM12-CH16

3.29 (83.6) 1 5/8

1 in. SS-CHM16- 3.67 (93.2)

Female ISO

1/4 in. 6000 (413) SS-CHF4RT- CH4 2.28 (57.9) 11/16

1/2 in. 4600 (316) SS-CHF8RT- CH8 3.29 (83.6) 1 1/16

3/4 in. 4300 (296) SS-CHF12RT-CH16

3.55 (90.2) 1 5/8

1 in. 4100 (282) SS-CHF16RT- 3.83 (97.3)

Male ISO

1/4 in. 6000 (413)

SS-CHM4RT- CH4 2.17 (55.1) 11/16

1/2 in. SS-CHM8RT- CH8 2.73 (69.3) 1

3/4 in. 5000 (344)

SS-CHM12RT-CH16

3.35 (85.1)1 5/8

1 in. SS-CHM16RT- 3.67 (93.2)

Female SAE/MS 1/2 in. 4600 (316) SS-CHF8ST-

CH8 2.74 (69.6)

1Male

SAE/MS 1/2 in.

6000 (413)

SS-CHM8ST- 2.48 (63.0)

Male VCO fitting

1/4 in. SS-CHVCO4- CH4 1.98 (50.3) 11/16

1/2 in. SS-CHVCO8- CH8 2.35 (59.7) 1

3/4 in. 5000 (344)

SS-CHVCO12-CH16 2.90 (73.7) 1 5/8

1 in. SS-CHVCO16-

Male VCR fitting

1/4 in. 6000 (413) SS-CHVCR4- CH4 2.28 (57.9) 11/16

1/2 in. 3500 (241) SS-CHVCR8- CH8 2.73 (69.3) 1

3/4 in. 3000 (206) SS-CHVCR12- CH16 3.78 (96.0) 1 5/8


1/3 (0.03) 1/3

1 (0.07) 1

5 (0.35) 1

10 (0.69) 10

25 (1.8) 25

13 Check Valves

CP and CPA Series

Nupro CP Series Check Valve MS-01-16, MS-01-20 N-ELD-240

AD flat

See specifications ISO 7/1, BS EN 10226-1, DIN-2999, and JIS B0203.

DimensionsDimensions, shown with Swagelok tube fitting nuts finger-tight, are for reference only and are subject to change.

Ordering InformationBasic ordering numbers specify stainless steel material. To order brass, replace SS with B in the basic ordering number.

Example: B-4CP4-

CP SeriesTo order, add a cracking pressure designator to the basic ordering number.

Example: B-4CP4-1/3

CPA SeriesTo order, add a cracking pressure range designator to the basic ordering number.

Example: SS-4CPA4-3



1/3 (0.03) 1/3

1 (0.07) 1

10 (0.69) 10

25 (1.8) 25


3 to 50 (0.21 to 3.5) 3

50 to 150 (3.5 to 10.4) 50

150 to 350 (10.4 to 24.2) 150

350 to 600 (24.2 to 41.4) 350

End ConnectionsBasic

Ordering Number Series

Dimensions, in. (mm)

Inlet/Outlet Size A D

Fixed Cracking Pressure, CP Series

Female NPT 1/4 in. SS-4CP4- 4CP 2.41 (61.2) 3/4

1/2 in. SS-8CP4- 8CP 3.71 (94.2) 1 1/16

Male NPT 1/4 in. SS-4CP2- 4CP 1.62 (41.1) 9/16

1/2 in. SS-8CP2- 8CP 2.28 (57.9) 7/8

Female/male NPT 1/4 in. SS-4CP6- 4CP

2.29 (58.2) 3/4

Male/female NPT 1/4 in. SS-4CP5- 1.75 (44.4) 3/4

1/2 in. SS-8CP5- 8CP 2.83 (71.9) 1 1/16

Female ISO 1/4 in. SS-4CP4-RT- 4CP

2.54 (64.5) 3/4

Male ISO 1/4 in. SS-4CP2-RT- 1.62 (41.1) 9/16

Adjustable Cracking Pressure, CPA Series

Female NPT 1/4 in. SS-4CPA4- 4CPA

2.98 (75.7) 3/4

Male NPT 1/4 in. SS-4CPA2- 1.62 (41.1) 9/16

1/2 in. SS-8CPA2- 8CPA 2.56 (65.0) 7/8

Male ISO 1/4 in. SS-4CPA2-RT- 4CPA 1.62 (41.1) 9/16

1/2 in. SS-8CPA2-RT- 8CPA 2.56 (65.0) 7/8

Safe Product SelectionWhen selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.

Caution: Do not mix or interchange parts with those of other manufacturers.

Seal Materials (All Series)Fluorocarbon FKM O-rings are standard in 316 stainless steel valves; Buna N O-rings are standard in brass valves. Other elastomer seals (poppet bonding material and O-ring) are available. To order, insert the seal material designator into the valve ordering number.

Example: B-2C-VI-1/3

Additional seal materials are available. Contact your authorized Swagelok sales and service representative for details.

Special Alloys (All Series)Springs of alloy 400 or alloy C-276 are available in some sizes. Valve bodies of alloy R-405, carbon steel, aluminum, or other alloys are available in some sizes. Contact your authorized Swagelok representative for more information.

Special Cleaning and Packaging (SC-11)Every C, CA, and CH series check valve with VCR or VCO end connections is processed in accordance with Swagelok Special Cleaning and Packaging (SC-11), MS-06-63, to ensure compliance with product cleanliness requirements stated in ASTM G93 Level C.

To order special cleaning and packaging for C, CA, and CH series check valves with other end connections, add -SC11 to the ordering number.

Example: SS-2C-1/3-SC11

PTFE-Coated Springs (C, CA, CP, and CPA Series)Springs with PTFE coating are available in some sizes. Contact your authorized Swagelok representative for more information.

ECE R110-Compliant Valves (CH Series)Stainless steel CH series check valves with 1/4 and 1/2 in. Swagelok tube fitting end connections and Buna C seals are available for use in alternative fuel service.

Pressure rating at 70F (20C): 3770 psig (259 bar)

Temperature ratings: 40 to 185F (40 to 85C)

Ordering numbers: 1/4 in. sizeSS-CH4-BC 1/2 in. sizeSS-CH8-BC

Options and Accessories

Sour Gas Valves (CH Series) CH series valves with Swagelok tube fitting end connections are available for sour gas service. Materials for wetted components are selected in accordance with NACE Specification MR0175 for sulfide stress cracking-resistant materials.

Technical Data Pressure Rating at 70F (20C) CH4 and CH8 series: 5000 psig (344 bar) CH16 series: 4700 psig (323 bar)

Temperature Rating 50 to 300F (45 to 148C)

Nominal Cracking Pressures 1/3, 1, and 5 psi (0.03, 0.07, and 0.35 bar) End Connections 1/4, 3/8, 1/2, 3/4, and 1 in. Swagelok tube fittings

Materials of Construction Body, poppetalloy R-405/B164 Sealsethylene propylene Backup ringPTFE Springalloy X-750/AMS 5699 All other materials and lubricant same as standard

product. See Materials of Construction, page 5.

Ordering InformationTo order, replace SS with M and insert -SG into the ordering number.

Example: M-CHS2-SG-1/3

Deflector Cap (CP and CPA Series)A polyethylene deflector cap is available for CP and CPA series valves with male NPT end connections. The deflector cap deflects flow from direct contact with personnel and prevents atmospheric contaminants from entering the valve. The deflector cap screws easily onto the male NPT outlet end of the valve. Maximum rating is 300 psig at 100F (20.6 bar at 37C).

To order, insert -DG for a green cap or -DR for a red cap into the ordering number.

Example: SS-4CPA2-DR-3

Maintenance KitsSpring kits and seal kits are available for retrofit or maintenance. See the Swagelok Check Valve Maintenance Kits catalog, MS-02-115.

Oxygen Service HazardsFor more information about hazards and risks of oxygen-enriched systems, see the Swagelok Oxygen System Safety technical report, MS-06-13.

VCR, VCO, SwagelokTM Swagelok Company 2002, 2003, 2005 Swagelok CompanyPrinted in U.S.A., MIJuly 2005, R5MS-01-176

Seal Material Designator Temperature Rating

F (C)

Buna N -BU 10 to 250 (23 to 121)

Ethylene propylene -EP 50 to 300 (45 to 148)

Fluorocarbon FKM -VI 10 to 375 (23 to 190)

Neoprene -NE 40 to 250 (40 to 121)

MERCER VALVE COMPANY, INC.Auto Seat Technology9100 SERIES FLANGED SAFETY RELIEF VALVES

MERCER VALVE COMPANY, INC.Auto Seat Technology

9100 SERIES FLANGED SAFETY RELIEF VALVES

2 www.mercervalve.net 1.800.833.6402 www.mercervalve.net 1.800.833.6402 3

9100 Series Flanged Specifications

Orifice Letter C D E F G H J K L M

RF x RF , RTJ x RF , RTJ x RTJ

3/41

1 1/2

.394

.122

.110

15 to 2999

-20 to 400

.818

.707

11 1/2

.520

.212

.196

15 to 2400

-20 to 400

.818

.707

11 1/2

.655

.337

.307

15 to 2400

-20 to 400

.818

.707

1 1/22

.775

.472

.503

15 to 2000

-20 to 400

.818

.707

1 1/22

1.050

.865

.785

15 to 2000

-20 to 400

.818

.707

23

1.350

1.430

1.287

15 to 1800

-20 to 400

.818

.707

3

1.625

2.074

1.838

15 to 1500

-20 to 400

.818

.707

34

2.020

3.205

2.853

15 to 1250

-20 to 400

.818

.707

4

2.280

4.080

3.600

15 to 1000

-20 to 400

.818

.707

Standard Inlet Sizes

Inlet and Outlet

Connection Types

Available

Actual Orifice Diameter (in)

Actual Orifice Area (in2)

API Orifice Area (in2)

Pressure Ranges (psi)

Standard Temperature

Range (F)

ASME Flow Coefficient,

Kd (Gas)

ASME Flow Coefficient, Kd (Liquid)

3/41

.281

.062

- - -

15 to 2999

-20 to 400

.818

.707

NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.





9100 Series Flanged Parts and Materials

ITEM NO PART NAME STANDARD MATERIALS

1 BODY SUBASSEMBLY CARBON STEEL

2 BASE SEAL SOFT STEEL

3 NOZZLE O-RING VITON

4 NOZZLE SUBASSEMBLY STAINLESS STEEL WITH SOFT SEAT

5 DISK SUBASSEMBLY STAINLESS STEEL

6 SET SPRING STAINLESS STEEL

7 ADJUSTMENT SCREW STAINLESS STEEL

8 ADJUSTMENT BUSHING STAINLESS STEEL

9 ADJUSTMENT SCREW O-RING BUNA N

10 CENTER BUSHING STAINLESS STEEL

11 CENTER BUSHING O-RING BUNA N

12 WASHER CARBON STEEL

13 LOCKNUT CARBON STEEL

14 CLOSED CAP ALUMINUM ALLOY

9100 SERIES FLANGED C , D , & E ORIFICES


13

12

11

10

9

8

7

6

5

4

3

1

2

14







2 BASE SEAL SOFT STEEL







9 CENTER BUSHING STAINLESS STEEL

10 CENTER BUSHING O-RING BUNA N

11 CENTER NUT CARBON STEEL




9100 SERIES FLANGED F & G ORIFICES


13

12

11

10

9

8

7

6

5

4

3

1

2

14











6 BONNET O-RING BUNA N

7 BONNET CARBON STEEL







9100 SERIES FLANGED H ORIFICE


13

12

11

10

9

8

7

6

5

4

3

1

2











6 BONNET O-RING BUNA N


8 BONNET BOLTS ALLOY STEEL


10 BONNET SUBASSEMBLY CARBON STEEL





9100 SERIES FLANGED J, K, L, & M ORIFICES


13

12

11

10

9

8

7

6

5

4

3

1

2

14





VALVE SIZEAND FLANGE

RATINGINLET X OUTLET

AVAILABLEORIFICE

SIZE

INLET-OUTLET CODE

PRESSURERANGE (psig)C.S. @100 F

CENTER TO FACEDIMENSIONS (IN.) + 1/16INLET X OUTLET X HT.

A X B X C

APPROX.WEIGHT

(lbs.)

11 3/4 150 X 1 150 C,D 15-285 4 1/8 X 4 1/2 X 9 912 3/4 300 X 1 150 C,D 286-740 4 1/8 X 4 1/2 X 9 1013 3/4 600 X 1 150 C,D 741-1480 4 1/8 X 4 1/2 X 9 1114 3/4 900 X 1 300 C,D 1481-2220 4 1/8 X 4 1/2 X 9 1415 3/4 1500 X 1 300 C,D 2221-2999 4 1/8 X 4 1/2 X 9 1416 1 150 X 1 150 D,E 15-285 4 1/8 X 4 1/2 X 9 1217 1 300 X 1 150 D,E 286-740 4 1/8 X 4 1/2 X 9 1318 1 600 X 1 150 D,E 741-1480 4 1/8 X 4 1/2 X 9 1419 1 900 X 1 300 D 1481-2220 4 1/8 X 4 1/2 X 9 1821 1 1500 X 1 300 D 2221-2999 4 1/8 X 4 1/2 X 9 1822 1 150 X 1 1/2 150 E 15-285 4 1/8 X 4 1/2 X 9 1323 1 300 X 1 1/2 150 E 286-740 4 1/8 X 4 1/2 X 9 1424 1 600 X 1 1/2 150 E 741-1480 4 7/8 X 4 1/2 X 10 1/2 1525 1 900 X 1 1/2 300 E 1481-2220 5 7/8 X 5 1/2 X 11 1/2 1926 1 1500 X 1 1/2 300 E 2221-2400 5 7/8 X 5 1/2 X 11 1/2 1922 1 150 X 1 1/2 150 F 15-285 4 1/8 X 4 3/4 X 9 3/4 1723 1 300 X 1 1/2 150 F 286-740 4 1/2 X 4 3/4 X 10 1/8 1824 1 600 X 1 1/2 150 F 741-1480 5 1/4 X 4 3/4 X 10 7/8 1925 1 900 X 1 1/2 300 F 1481-2220 5 1/4 X 6 X 10 7/8 2326 1 1500 X 1 1/2 300 F 2221-2400 5 1/4 X 6 X 10 7/8 2327 1 150 X 2 150 D*,E* 15-285 4 1/8 X 4 1/2 X 9 1428 1 300 X 2 150 D*,E* 286-740 4 1/8 X 4 1/2 X 9 1529 1 600 X 2 150 D* 741-1480 4 1/8 X 4 1/2 X 9 1629 1 600 X 2 150 E 741-1480 5 1/4 X 4 1/2 X 10 7/8 2231 1 900 X 2 300 D,E 1481-2220 5 1/4 X 5 1/2 X 10 7/8 2432 1 1500 X 2 300 D 2221-2999 5 1/4 X 5 1/2 X 10 7/8 2432 1 1500 X 2 300 E 2221-2400 5 1/4 X 5 1/2 X 10 7/8 2433 1 1/2 150 X 2 150 F*,G 15-285 4 7/8 X 4 3/4 X 10 1/2 2234 1 1/2 300 X 2 150 F*,G 286-740 4 7/8 X 6 X 10 1/2 2535 1 1/2 600 X 2 150 F*,G 741-1480 4 7/8 X 6 X 10 1/2 2536 1 1/2 900 X 2 300 F,G 1481-2220 5 7/8 X 6 X 11 1/2 3336 1 1/2 900 X 2 300 D*,E* 1481-2220 4 1/8 X 5 1/2 X9 3/4 3292 1 1/2 1500 X 2 300 D* 2221-2999 4 1/8 X 5 1/2 X9 3/4 3292 1 1/2 1500 X 2 300 E* 2221-2400 4 1/8 X 5 1/2 X9 3/4 3233 1 1/2 150 X 2 150 H 15-285 4 7/8 X 4 3/4 X 12 5/8 3434 1 1/2 300 X 2 150 H 286-740 4 7/8 X 4 3/4 X 12 5/8 3835 1 1/2 600 X 2 150 H 741-850 4 7/8 X 4 3/4 X 12 5/8 3855 1 1/2 150 X 3 150 G* 15-285 4 7/8 X 4 3/4 X 10 1/2 3556 1 1/2 300 X 3 150 G* 286-740 4 7/8 X 6 X 10 1/2 3874 1 1/2 600 X 3 150 G* 741-1480 4 7/8 X 6 X 10 1/2 3875 1 1/2 900 X 3 300 F*,G* 1481-2220 4 7/8 X 6 1/2 X 10 1/2 5094 1 1/2 1500 X 3 300 F* 2221-2400 4 7/8 X 6 1/2 X10 1/2 5055 1 1/2 150 X 3 150 H* 15-285 5 1/8 X 4 7/8 X 12 7/8 3856 1 1/2 300 X 3 150 H* 286-740 5 1/8 X 4 7/8 X 12 7/8 4242 2 150 X 2 150 G 15-285 4 7/8 X 4 3/4 X 10 1/2 3443 2 300 X 2 150 G 286-740 4 7/8 X 4 3/4 X 10 1/2 3644 2 600 X 2 150 G 741-1480 5 3/8 X 6 X 11 3845 2 900 X 2 300 G 1481-2000 6 1/16 X 6 X 11 11/16 5542 2 150 X 2 150 H 15-285 4 7/8 X 4 3/4 X 12 5/8 3643 2 300 X 2 150 H 286-740 4 7/8 X 4 3/4 X 12 5/8 3844 2 600 X 2 150 H 741-850 4 7/8 X 6 X 12 5/8 40






VALVE SIZEAND FLANGE

RATINGINLET X OUTLET

AVAILABLEORIFICE

SIZE

INLET-OUTLET CODE

PRESSURERANGE (psig)C.S. @100 F

CENTER TO FACEDIMENSIONS (IN.) + 1/16INLET X OUTLET X HT.

A X B X C

APPROX.WEIGHT

(lbs.)

``

46 2 150 X 2 1/2 150 H 15-285 4 7/8 X 4 3/4 X 12 5/8 3947 2 300 X 2 1/2 150 H 286-740 4 7/8 X 4 3/4 X 12 5/8 4048 2 600 X 2 1/2 150 H 741-850 4 7/8 X 6 X 12 5/8 4248 2 600 X 2 1/2 150 H 851-1480 4 7/8 X 6 X 15 3/16 4789 2 900 X 2 1/2 150 H 1481-2000 6 1/16 X 6 X 16 3/8 6551 2 150 X 3 150 G 15-285 4 7/8 X 5 3/8 X 10 1/2 3852 2 300 X 3 150 G 286-740 4 7/8 X 5 3/8 X 10 1/2 4053 2 600 X 3 150 G 741-1480 6 1/16 X 6 3/8 X 11 11/16 4254 2 900 X 3 300 G 1481-2000 6 1/16 X 6 3/8 X 11 11/16 6052 2 300 X 3 150 H* 286-740 5 1/8 X 4 7/8 X 12 7/8 4253 2 600 X 3 150 H* 741-850 6 1/16 X 6 3/8 X 13 13/16 4453 2 600 X 3 150 H* 851-1480 6 1/16 X 6 3/8 X 16 3/8 4891 2 900 X 3 150 H* 1481-2000 6 1/16 X 6 3/8 X 16 3/8 6651 2 150 X 3 150 J* 15-285 5 3/8 X 4 7/8 X 13 3/8 5452 2 300 X 3 150 J* 285-450 5 3/8 X 4 7/8 X 13 3/8 5652 2 300 X 3 150 J* 451-740 5 3/8 X 4 7/8 X 17 1/16 6562 3 150 X 4 150 J,K* 15-285 6 1/8 X 6 3/8 X 14 3/16 7364 3 300 X 4 150 J 286-450 6 1/8 X 6 3/8 X 14 3/16 7564 3 300 X 4 150 J 451-740 6 1/8 X 6 3/8 X 17 7/8 8564 3 300 X 4 150 K* 286-740 6 1/8 X 6 3/8 X 17 7/8 8565 3 600 X 4 150 J,K 740- 1480 6 3/4 X 6 3/8 X 18 1/2 9066 3 900 X 4 150 J 1481-1800 6 3/4 X 6 3/8 X 18 1/2 11067 3 150 X 4 150 L* 15-285 6 1/8 X 6 1/2 X 15 3/4 9268 3 300 X 4 150 L* 15-285 6 1/8 X 6 1/2 X 15 3/4 9671 4 300 X 6 150 L* 286-300 7 1/16 X 7 1/8 X 17 1/4 14571 4 300 X 6 150 L* 301-600 7 1/16 X 7 1/8 X 20 3/16 16071 4 300 X 6 150 L* 601-740 7 1/16 X 7 1/8 X 24 13/16 18072 4 600 X 6 150 L* 741-1250 7 1/16 X 8 X 24 5/8 19570 4 150 X 6 150 M* 15-250 7 X 7 1/4 X 17 3/16 13570 4 150 X 6 150 M* 251-285 7 X 7 1/4 X 20 1/8 15071 4 300 X 6 150 M* 286-500 7 X 7 1/4 X 20 1/8 16071 4 300 X 6 150 M* 501-740 7 X 7 1/4 X 24 3/4 18072 4 600 X 6 150 M* 741-1000 7 X 8 X 24 3/4 195

NOTES: (1) * Indicates API Flange Size and Dimensions. (2) Consult factory for other size options. (3) Pressure Limit, Weight, & C dimension may vary with sour gas options.






FLANGE RATINGS

ASME B16.5-2003 ANNEX F

Tables F2-1.1 & F2-2.2 Pressure-Temperature Ratings for Group 1.1 & 2.2 Materials

Forging Castings Carbon Steel A105 A216 Gr. WCB Stainless Steel A182 Gr. F316 A351 Gr. CF3M

Working Pressures by Classes, psig

Temp. Range (F) Material 150lb 300lb 600lb 900lb 1500lb 2500lb

Min Max Carbon 285 740 1480 2220 3705 6170 Steel Stainless 275 720 1440 2160 3600 6000 Steel Carbon 260 680 1360 2035 3395 5655 Steel Stainless 235 620 1240 1860 3095 5160 Steel Carbon 230 655 1310 1965 3270 5450 Steel Stainless 215 560 1120 1680 2795 4660 Steel Carbon 200 635 1265 1900 3170 5280 Steel Stainless 195 515 1025 1540 2570 4280 Steel Carbon 170 605 1205 1810 3015 5025 Steel Stainless 170 480 955 1435 2390 3980 Steel Carbon 140 570 1135 1705 2840 4730 Steel Stainless 140 450 900 1355 2255 3760 Steel

-20 100

101 200

201 300

301 400

401 500

501 600





C D E F G H J K L M 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074 3.205 4.08

15 30 60 104 165 231 424 701 1017 1572 2001

20 35 69 120 191 267 489 808 1172 1812 2306

25 40 78 136 216 302 554 916 1328 2052 2612

30 44 87 152 241 338 619 1023 1483 2292 2918

50 65 128 222 352 493 904 1495 2168 3350 4264

75 90 178 309 491 688 1261 2084 3023 4671 5947

100 116 228 396 630 883 1617 2674 3878 5993 7629

125 141 278 484 769 1077 1974 3264 4733 7314 9311

150 167 329 571 908 1272 2331 3853 5589 8636 10994

200 218 429 746 1186 1661 3044 5033 7299 11279 14359

300 320 631 1096 1742 2440 4471 7391 10720 16566 21088

400 423 832 1445 2298 3218 5898 9750 14141 21852 27818

500 525 1033 1795 2854 3997 7324 12109 17562 27138 34548

600 627 1234 2145 3409 4775 8751 14467 20983 32425 41277

700 730 1435 2494 3965 5554 10178 16826 24403 37711 48007

800 832 1637 2844 4521 6332 11605 19185 27824 42998 54737

900 934 1838 3194 5077 7111 13031 21543 31245 48284 61466

1000 1036 2039 3544 5633 7889 14458 23902 34666 53570 68196

1200 1241 2442 4243 6745 9446 17312 28619 41508 64143

1500 1548 3045 5292 8412 11782 21592 35695 51771

1800 1854 3649 6341 10080 14118 25872 42771

2000 2059 4051 7040 11191 15675 28726

2400 2468 4856 8439 13415

2600 2673 5259

2800 2877 5661

2999 3081 6062

Set Pressure

(psi)

9100 Series Flanged Capacity Charts

CAPACITY IN SCFM OF AIR AT 60F AND STD ATMOSPHERIC CONDITIONS





C D E F G H J K L M 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074 3.205 4.08

15 38 75 130 206 289 529 875 1269 1960 2496

20 44 86 150 238 333 610 1008 1463 2260 2877

25 50 97 169 269 377 691 1142 1657 2560 3259

30 55 109 189 301 421 772 1276 1851 2860 3640

50 81 159 276 439 615 1128 1864 2704 4179 5319

75 113 222 385 613 858 1573 2600 3771 5827 7418

100 145 285 495 786 1101 2018 3336 4838 7476 9517

125 177 347 604 959 1344 2463 4071 5905 9125 11616

150 208 410 713 1133 1587 2908 4807 6972 10773 13715

200 272 536 931 1480 2072 3798 6278 9105 14071 17912

300 400 787 1367 2173 3043 5577 9220 13373 20665 26307

400 527 1038 1803 2866 4015 7357 12163 17640 27260 34702

500 655 1289 2239 3560 4986 9137 15105 21908 33855 43097

600 782 1540 2676 4253 5957 10917 18048 26175 40449 51492

700 910 1791 3112 4947 6928 12697 20990 30443 47044 59887

800 1038 2042 3548 5640 7899 14477 23932 34710 53639 68283

900 1165 2293 3984 6333 8871 16256 26875 38978 60233 76678

1000 1293 2544 4420 7027 9842 18036 29817 43245 66828 85073

1200 1548 3046 5293 8414 11784 21596 35702 51780 80017

1500 1931 3799 6602 10494 14698 26935 44529 64583

1800 2313 4552 7910 12574 17611 32275 53356

2000 2568 5054 8783 13961 19554 35835

2400 3079 6058 10527 16735

2600 3334 6560

2800 3589 7062

2999 3843 7562

Set Pressure

(psi)

CAPACITY IN SCFM OF 0.6 SG NATURAL GAS AT 60F AND STD ATMOSPHERIC CONDITIONS





C D E F G H J K L M 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074 3.205 4.08

15 7 14 24 38 54 99 163 236 365 465

20 8 16 27 43 61 111 184 267 413 526

25 9 17 30 48 67 123 203 295 456 580

30 10 19 33 52 73 133 221 320 495 630

50 12 24 42 67 94 172 285 413 639 813

75 15 30 52 82 115 211 349 506 782 996

100 17 34 60 95 133 244 403 584 903 1150

125 20 38 67 106 149 272 450 653 1010 1285

150 21 42 73 116 163 299 493 716 1106 1408

200 25 49 84 134 188 345 570 826 1277 1626

300 30 60 103 164 230 422 698 1012 1564 1991

400 35 69 119 190 266 487 806 1169 1806 2299

500 39 77 134 212 297 545 901 1307 2019 2571

600 43 84 146 233 326 597 987 1431 2212 2816

700 46 91 158 251 352 645 1066 1546 2389 3042

800 49 97 169 269 376 689 1140 1653 2554 3252

900 52 103 179 285 399 731 1209 1753 2709 3449

1000 55 109 189 300 421 771 1274 1848 2856 3635

1200 61 119 207 329 461 844 1396 2024 3128

1500 68 133 231 368 515 944 1561 2263

1800 74 146 253 403 564 1034 1709

2000 78 154 267 425 595 1090

2400 86 168 293 465

2600 89 175

2800 92 182

2999 96 188

Set Pressure

(psi)

CAPACITY IN GPM WATER AT 60F AND STD ATMOSPHERIC CONDITIONS





9100 Series Flanged Product Numbering System

VALVE SERIES

91 9100 Series

INLET & OUTLET COMBINATION(See Selection Table pages 8 & 9)

ORIFICE SIZEC to M

INLET BASE & BODY MATERIAL

1 RF x RF / CARBON STEEL

2 RF x RF / STAINLESS STEEL

3 RTJ x RF / CARBON STEEL

4 RTJ x RF / STAINLESS STEEL

A RTJ x RTJ / CARBON STEEL

B RTJ x RTJ / STAINLESS STEEL

CAP TYPE

1 CLOSED CAP

2 OPEN LIFT LEVER

3 CLOSED LIFT LEVER

4 CLOSED CAP W/STAINLESS STEEL BONNET (H - M ORIFICE)

5 OPEN LIFT LEVER W/STAINLESS STEEL BONNET (H - M ORIFICE)

6 CLOSED LIFT LEVER W/STAINLESS STEEL BONNET (H - M ORIFICE)

91 - 17 D 1 1

CONSULT FACTORY FORADDITIONAL INFORMATION

AND OPTIONS






V 06 I 1

2 DIGIT SPECIAL CODE(IF APPLICABLE ASSIGNED BY MERCER)

O-RING MATERIAL

1 STANDARD O-RINGS (VITON & BUNA-N)

TRIM CODES

U 316 S.S. DISK & NOZZLE (STD GAS SERVICE F,G,H,J,K,L, & M ORIFICES)*

I 17-4 S.S. DISK & NOZZLE (STD GAS SERVICE D&E ORIFICES)

C 440C S.S. DISK, 17-4 S.S. NOZZLE (STD GAS SERVICE C ORIFICE AND HIGH PRESSURE F,G,H,J,K & L)*

L LIQUID SERVICE 316 S.S. DISK & NOZZLE

N SOUR GAS SERVICE 316 S.S. DISK & NOZZLE

B SOUR LIQUID SERVICE 316 S.S. DISK & NOZZLE

SPRING CODE(ASSIGNED BY MERCER)

SEAT MATERIAL

V VITON 90 DURO

T 15% GLASS FILLED TEFLON

P VIRGIN PEEK

* = U TRIM CODE CHANGES TO C TRIM CODE ATF > 1399psi, G > 1199psi, H > 1049psi

J > 1124psi, K > 799psi, L > 599psi

9100 SERIES CATALOG

CORPORATE HEADQUARTERS9609 NW 4th STREETOKLAHOMA CITY, OK 731271-800-833-6402PHONE: (405) 495-6533, FAX: (405) [email protected]

HOUSTON BRANCH OFFICE6218 LONG DRIVEHOUSTON, TX 770871-866-833-6402PHONE: (713) 242-6960, FAX: (713) [email protected]

CALGARY BRANCH OFFICE#203, 2835 23rd St. NECALGARY, ALBERTA T2E 7A4PHONE: (403) 250-5557, FAX: (403) [email protected]

CHICAGO BRANCH OFFICECUSTOMER RELATIONS DEPARTMENTP.O. Box 597Libertyville, IL [email protected]

WWW.MERCERVALVE.NET

MVC91FLG REVISION DATE: 4/07 SUPERCEDES 8/05

Sealco Commercial Vehicle Produ... Page 1

http://www.sealcocvp.com/prod/c... 6/11/2007 11:16:35 AM

chem oil - check valve.pdf

Documents

stainless steel valves

pressure ratings of

cover forged carbon

pressurethe pressure

cracking pressurecompact

brass valves

downstream pressure

cracking pressurelocking