cheese making

18
Cheese making

Upload: bhargvi-sharma

Post on 08-May-2015

5.727 views

Category:

Business


0 download

TRANSCRIPT

Page 1: Cheese making

Cheese making

Page 2: Cheese making

Introduction • Cheese is a generic term for a diverse group of milk-

based food products. Cheese is produced throughout the world in wide-ranging flavours, textures, and forms.

• Cheese consists of proteins and fat from milk, usually the milk of cows, buffalo, goats, or sheep. It is produced by coagulation of the milk protein casein.

Page 3: Cheese making

Objective of cheese making

To obtain the optimum cheese composition with

respect to moisture, acidity (pH), fat, protein and minerals (especially calcium)

Establish the correct structure of the cheese at the microscopic level; and

Ripen to perfection. Grouped according to texture and basic

manufacturing procedures there are seven families of cheese.

Page 4: Cheese making
Page 5: Cheese making

First Step • Milk from the evening milking is allowed to

stand overnight. By natural processes, this milk will have partially separated during its overnight standing period. The cream is skimmed off, and the partially skimmed milk is combined with whole milk from the morning milking.

Page 6: Cheese making

Second StepThe milk is gradually heated to 30 to

35°C (86 to 95°F)before acidification and coagulation.

Page 7: Cheese making

Step 3• Acidification: Starter culture is added to milk to

change lactose (milk sugar) into lactic acid. This process changes the acidity level of the milk and begins the process of turning milk from a liquid into a solid.

Page 8: Cheese making

Starter culture• Fermentation starters (called simply starters within

the corresponding context) are preparations to assist the beginning of the fermentation process in preparation of various foods and fermented drinks. A starter culture is a microbiological culture which actually performs fermentation.

Page 9: Cheese making

Step 4Coagulation: Rennet is added to further encouragethe milk to solidify ,forming a custard-like mass.

Page 10: Cheese making

rennet• .Rennet An enzyme used to coagulate milk during

the cheese making process. Rennet is derived from one of four sources: the stomach lining of a young calf (the enzyme rennin is found in the stomach lining of animals because it aids in the digestion of their mother's milk)

• plants (typically thistle)• microbes in fungus and yeast• Genetically engineered rennet that imitates animal rennet.

Page 11: Cheese making

Step 4 Cutting:- It's then cut into small pieces to begin the process of separating the liquid (whey) from the milk solids (curds).Large curds are cooked at lower temperatures, yielding softer cheeses like Mascarpone and Ricotta. Curds cut smaller are cooked at higher temperatures, yielding harder cheeses like Gruyere and Romano

Page 12: Cheese making

Step 5 Stirring, Heating & Draining:-Cheese makers cook and stir the curds and whey until

the desired temperature and firmness of the

curd is achieved. The whey is then drained

off, leaving a tightly formed curd.

Page 13: Cheese making

Here you can see the cheese maker taking some of the whey out of the vat.

Page 14: Cheese making

Step 6• Salting: Salt adds flavour and also acts as a preservative so the cheese

does not spoil during long months or years of ageing. It also helps a natural rind to form on the cheese. There are several ways to use salt. Salt can be added directly into the curd as the cheese is being made. The outside of the wheel of cheese can be rubbed with salt or with a damp cloth that has been soaked in brine. The cheese can also be bathed directly in vat of brine.

Concentrated brine. adding the salt directly into the

drained curd

Page 15: Cheese making

Step 7 Curd Transformation Different handling techniques and salting affect

how the curd is transformed into the many cheese varieties made.

Page 16: Cheese making

Step 8• Shaping: The cheese is put into a basket or a mold to form it into a specific shape. During this process, the cheese is also pressed with weights or a machine to expel any remaining liquid.Pressing determinesthe characteristic shape of the cheese and helps complete the curd formation. Mostcheeses are pressed inthree to 12 hours, depending on their size.

Page 17: Cheese making

Step 9Ripening: Referred to as affinage, this process ages cheese until itreaches optimal ripeness. During this process, the temperature and humidity of the cave or room where the cheese ages is closely monitored. For some cheeses, ambient molds in the air give the cheese a distinct flavour. For others, mold is introduced by spraying it on the cheese (brie) or injecting it into the cheese (blue cheese). Some cheeses must be turned, some must be brushed with oil, and some must be washed with brine or alcohol.

Page 18: Cheese making

Aging should take place in a controlled environment. Different cheeses required different temperatures and humidity's, however in a small refrigerator temperature is kept at 55°F and 85% humidity. During aging, the cheese should be rotated or flipped periodically to prevent moisture from settling in the cheese and to prevent an inconsistent internal consistency.