Before or

after?

Before November

2010

AfterNovember 2010

0-12 months

0-12 months

Or 12+months

12+ months

Home

DFR’s continue to occur? No

Treadmill is operational

Home

Yes

Verify the power set up for the

treadmills

Follow instructions in Power Set Up for Treadmills

DO NOT CONTINUE UNTILL VERIFIED

Home

Check the MCB to

determine what version software is inside

Follow instructions in Determining MCB Software

Home

DFR’s continue to occur?

Yes

No Treadmill is operational

Home

The running belt may be dirty. Clean

between the belt and deck

Follow instructions in Cleaning Between the Belt and Deck

Home

DFR’s

continue to occur?

Yes

No Treadmill is operational

Home

Follow instructions in Tensioning the Running Belt

Re-tension running belt. If the running belt is over tensioned, it will cause the motor to pull more current

Home

DFR’s continue

to occur?

Yes

No Treadmill is operational

Home

Check the drive belt tension. If

the drive belt is over-

tensioned, it will cause

the motor to pull more current

Follow instructions in Checking the Drive Belt Tension

Home

DFR’s continue

to occur?

Slide 25Yes

No Treadmill is operational

Home

The running belt may be dirty. Clean

between the belt and deck

Follow instructions in Cleaning Between the Belt and Deck

Home

DFR’s

continue to

occur?

Treadmill is operational

Has the treadmill been in use for over

24 months?

Yes No

Home

No

The running belt may be worn out. Check the

condition of the running belt

Follow instructions in Checking the Condition of the Running Belt

Home

DFR’s continue

to occur?

Yes

No Treadmill is operational

Home

Check the drive

belt tension. If the drive belt is over-tensioned, it will cause the motor

to pull more current

Follow instructions in Checking the

Drive Belt Tension

Home

If the power source

has not been checked and the DFR codes (80 or 800) occur, it is

most likely that the in issue is with the

power source

Follow instructions in Power Set Up for Treadmills

Treadmill is operational

Home

The running belt may be dirty. Clean

between the belt and deck

Follow instructions in Cleaning Between the Belt and Deck

Home

The running belt may be worn our. Check the

condition of the running belt

Follow instructions in Checking the

Condition of the Running Belt

Home

DFR’s continue

to occur?

Yes

No Treadmill is operational

Home

DFR’s continue

to occur?

Yes

No Treadmill is operational

Home

DFR’s continue

to occur?

Yes

No Treadmill is operational

Home

Check the MCB to

determine what version software is

inside

Follow instructions in Determining

MCB Software

Home

If the power

source has not been checked and the DFR codes (80 or 800) occur, it is

most likely that the issue is with

the power source.

Follow instructions in Power Set

Up for Treadmills

Treadmill is operational

Home