check it out at hookit accessories gold€¦ · disc pad, 5/8” center mount (soft) disc pad, low...
TRANSCRIPT
Description
Bodyman Pad
Painter Pad
Disc Pad, 5/8” Center Mount
Disc Pad, 5/8” Center Mount (Soft)
Disc Pad, Low Profile
Disc Pad, 5 Mnt Holes (Natl Detroit)
Disc Pad, 6 Mnt Holes (CP)
Soft Hand Pad
Hard Hand Pad
5” Soft Hand Block
5” Hand Block
7 3/4” Hand Block
16” Hand File Board
16” Air File Board
16” Orbital Air File Shoe
16” Orbital File Shoe Base Plate
5” Disc D/F
10
05655
5” Disc
10
05575
05555
6” Disc D/F
10
05646
05656
Items/Case
2 3/4” File Sheet
10
05442
05440
05441
05444*
05448**
05446**
05898**
6” Disc
10
05576
05546
05556
05591
05586
8” Disc D/F
1
05681
8” Disc
1
05579
05568
05581
05582
Part Numbers
3M™ Stikit™ Accessories
3M™ Gold Abrasiveswith Hookit™ and Stikit™ Attachments
StandardGold
For Over 25 Years
The
• The Abrasives by which all others are measured
• Delivering uniform, consistent finishes
• Available in both Stikit™ and Hookit™ for convenience and reuse
3M™ Hookit™ and Stikit™ Accessories
* 1 per case
** 5 per case
Description
Bodyman Pad
Painter Pad
Disc Pad, Low Profile
Soft Interface Pad
Disc Pad, 5/8” Center Mount
Disc Pad, 5/8” Center Mount (Soft)
Disc Pad, 5 Mnt Holes (Natl Detroit)
Disc Pad, 6 Mnt Holes (CP)
Disc Pad, 5 Mnt Holes (Snap-On)
Soft Hand Pad
Half Round Soft Hand Pad
5” Soft Hand Block
5” Hand Block
7 3/4” Hand Block
16” Hand File Board
16” Air File Board
16” Orbital Air File Shoe
16” Orbital File Shoe Base Plate
11” Straight Line Air File Shoe
6 Meter Whip Hose Kit
3” Disc
5
20427
05771
5” Disc D/F
10
05858
20206
20353
20278
5” Disc
10
05775
05573
Items/Case
8” Disc
1
05779
05768
05781
05782
05783
2 3/4” File Sheet D/F 2 3/4” File Sheet
10
05742
05740
05741
05744*
05748**
05746**
05898**
05750**
05215
6” Disc D/F
10
05865
05551
20356
05777
6” Disc
10
05776
05778
05756
05777
05791
05792
8” Disc D/F
1
05780
05781
05782
05783
10
C weight
05207
05208
05209*
05848**
05899**
05898**
05215
Part Numbers
3M™ Hookit™ Accessories
AutomotiveAftermarket Division3M CenterBuilding 223-6N-01St. Paul, MN 55144-1000U.S.A.1-877-MMM-CARS (666-2277) orwww.3M.com/3MAbrasives
SkillsSuccess
3M Gold tier abrasives have been the workhorse abrasive in the industry since they were introduced over 25 years ago.for
New!Standard Operating Procedures
Check it out at www.3M.com/automotive
• Click on Learning Center
• Instructional videos and procedures
• Step-by-step training modules
• Metal and plastic repair
• Dry primer sanding and clear blending
• Spot repair and denib procedures
• Paint finishing, car clean up and more...
From metal and plastic repair, to primer sanding, paint finishing and car clean-up, 3M has the repair processes and products for you
to achieve the perfect finish. Feel confident your repair is done professionally and efficiently using the most up-to-date processes in the
collision repair industry.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
3M, Hookit, Stikit and Trizact are trademarks of 3M Company. NASCAR® and NASCAR Performance® are registered trademarks of the National Association for Stock Car Auto Racing, Inc.Please recycle. Printed in U.S.A. © 3M 2010. All rights reserved.60-4402-7669-3
Dent Repair and Paint Removal
Featheredging and Primer SandingThese products are designed to provide productivity in a variey of applications from express repair to larger body repair. Use the coarser
products for sanding and featheredging filler and putties, and the finer grades for further refinement and primer sanding.
D and E weight backing makes these abrasive products extremely durable for sanding paint, metal, or fiberglass. Open coat construction
reduces loading on fresh filler. Products are available in no-hole and dust-free configurations, with either Stikit™ or Hookit™ attachment.
In our industry,these products are
pure Gold.
Discs/Box
Boxes/Case
Dent Preparation and Paint Removal3M™ Green Corp Hookit™ Discs
Product ID
751U
751U
751U
750U
750U
750U
Weight
E weight
E weight
E weight
E weight
E weight
E weight
5”
25
5
00508
8” D/F
25
5
00625
00624
00621
8”
25
5
01652
00525
00524
00522
00521
00520
2 3/4” x
16 1/2” D/F
50
5
00642
00639
2 3/4” x
16 1/2”
50
5
00543
00542
00540
00539
00538
6” D/F
25
5
00616
00615
00612
6”
25
5
00516
00515
00513
00512
Grade
24E
36E
40E
60E
80E
100E
Part Numbers
Featheredging and Primer Sanding
Product ID
236U
236U
236U
236U
236U
216U
216U
216U
216U
216U
216U
216U
216U
216U
Weight
C weight
C weight
C weight
C weight
C weight
A weight
A weight
A weight
A weight
A weight
A weight
A weight
A weight
A weight
3”
50
4
00921
00920
00919
00918
00917
00916
00915
00914
00913
00912
01011
01010
*75 discs/roll
5”
100
4
01628*
00967*
00966
00965
00964
00963
00962
00961
00959
00957
00956
01015
01014
5” D/F
100
4
01067*
01064
01063
01062
01059
01057
Discs/Box
Boxes/Case
2 3/4” x
16 1/2”
50
5
02473
02472
02470
02469
6” D/F
100
4
01083*
01082
01081
01080
01079
01078
01077
01076
01075
01073
01072
01091
01090
6”
100
4
00983*
00982
00981
00980
00979
00978
00977
00976
00975
00974
00973
00972
00923
00922
Grade
P80
P100
P120
P150
P180
P220
P240
P280
P320
P360
P400
P500
P600
P800
Part Numbers
3M™ Gold Hookit™ Discs
Discs/Roll
Rolls/Case
Featheredging and Primer Sanding
Product ID
255L
255L
255L
255L
255L
255L
255L
255L
255L
255L
255L
255L
Weight
Film
Film
Film
Film
Film
Film
Film
Film
Film
Film
Film
Film
6” D/F
125
4
01383*
01382
01381
01380
01379
01378
01377
01375
01373
01372
*100 discs/roll
75
6
01333
01332
01331
01330
01329
01328
01327
01326
01325
01323
01322
125
4
C weight
01363*
01362
01361
01360
01359
01358
01357
01356
01355
01354
01353
01352
6”
Grade
P80
P100
P120
P150
P180
P220
P240
P280
P320
P360
P400
P500
Part Numbers
3M™ Gold Film Stikit™ Discs
3M™ Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our
Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting discs that cut through a variety
of surfaces - including paint, primer, fiberglass, metal and SMC. 3M™ Gold Abrasives produce uniform, consistent finishes and
are available in both Stikit™ and Hookit™ options for convenience and reuse. When job quality and productivity matter most, turn
to the abrasives that shops have relied on year after year.
Featheredging and Primer Sanding
Product ID
236U
236U
236U
236U
236U
216U
216U
216U
216U
216U
216U
216U
216U
216U
Weight
C weight
C weight
C weight
C weight
C weight
A weight
A weight
A weight
A weight
A weight
A weight
A weight
A weight
A weight
5” D/F
175
10/6
01628*
01626
01625
01624
01623
01622
01620
01619
Discs/Roll
Rolls/Case
8”
125
4
01493
01492
01491
01490
01489
01488
01487
01485
01484
2 3/4” x
25 YDS
10
02599
2 3/4” x
30 YDS
10
02598
02597
2 3/4” x
45 YDS
10
02596
02595
02594
02593
02591
02590
02589
4 1/2” x
20 YDS
6
02698
02697
02696
02695**
02694**
6” D/F
175
10/6
01643*
01642*
01641*
01640
01639
01638
01637
01636
01635
01634
01633
75
6/12
01198
01197
01196
01195
01194
01193
01190
01188
175
10/6
C weight
01428*
01427*
01426*
01425
01424
01423
01422
01421
01420
01419
01417
5”
75
6/12
01213
01212
01211
01210
01209
01208
01206
01205
01204
01203
01202
01201
01200
175
10/6
C weight
01443*
01442*
01441*
01440
01439
01438
01437
01436
01435
01434
01433
01432
6”
Grade
P80
P100
P120
P150
P180
P220
P240
P280
P320
P360
P400
P500
P600
P800
Part Numbers
3M™ Gold Stikit™ Discs
* 125 discs/roll** 25 yards
Discs/Box
Boxes/Case
Dent Preparation and Paint Removal
Product ID
255U
251U
251U
255U
246U
Weight
E weight
E weight
E weight
E weight
D weight
5” D/F
100
5
01665
01561*
*10 per case
8” D/F
50
5
01661
01660
01569
8”
50
5
01552
01551
01550
01556
01549
2 3/4” x
16 1/2” D/F
100
5
02262
02261
02260
2 3/4” x
16 1/2”
100
5
02232
02231
02230
6” D/F
100
5
01668
01667
01566*
5”
100
5
01546
01545
01501*
6”
100
5
01548
01547
01506*
Grade
24E
36E
40E
60E
80D
Part Numbers
3M™ Green Corp Stikit™ Discs
Paint Preparation and Paint FinishingPerformance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft
interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before buffing.
Discs/Box
Boxes/Case
Paint Preparation and Paint Finishing
Product ID
260L
260L
260L
260L
260L
Weight
Film
Film
Film
Film
Film
3”
50
4
00911
00910
00909
00908
00907
6” D/F
100
4
01071
01070
01069
01068
01050
6”5” D/F
100
4
01055
01054
01053
01052
01051
5”
100
4
00955
00954
00953
00952
00951
100
4
00971
00970
00969
00968
00950
Grade
P600
P800
P1000
P1200
P1500
Part Numbers
3M™ Gold Hookit™ Discs
Discs/Box
Boxes/Case
Product ID
260L
260L
260L
260L
Weight
Film
Film
Film
Film
5”
100
4
83678
83679
83680
83681
6”
100
4
01321
01320
01319
01318
Grade
P600
P800
P1000
P1200
Part Numbers
3M™ Gold Stikit™ Discs
3M™ Trizact™ DiscsPatterned, precise mineral structures give the combination of fast cut and consistent finish every time. Use P1000 foam blending discs
for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange
peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system.
5”
02095
02096
3”
02091
02094
02087
6”
02090
02088
02085
5”
15
4
25
4
15
4
Part Numbers
3M™ Trizact™ Discs
Discs/Box
Boxes/Case
Discs/Box
Boxes/Case
Discs/Box
Boxes/Case
Product ID
443SA
471LA
443SA
Weight
Foam
Film
Foam
Grade
P1000
P1500
P3000