chapter 8 lesson 3 motion and forces - mr....
TRANSCRIPT
Copyri
ght
© G
lenco
e/M
cGra
w-H
ill,
a d
ivis
ion o
f T
he
McG
raw
-Hil
l C
om
pan
ies,
Inc.
What is force?Today you might have pushed open the classroom door
or pulled the zipper on your backpack. In both of these cases, you are applying a force. A force is a push or a pull on an object. Force has size and direction. Just as you used arrows to show the size and direction of velocity and acceleration, arrows can show the size and direction of a force. The unit for force is the newton (N). You use about 1 N of force to lift a stick of butter or a medium-sized apple.
Contact ForcesWhen a karate expert breaks a board, his or her hand
applies a force to the wood. A contact force is a push or a pull one object applies to another object that is touching it. Contact forces can be small, such as a finger pushing a button. They can also be large, such as a wrecking ball crashing into a building.
Noncontact ForcesHave you ever held a magnet near a paper clip and made
the paper clip move without touching the two objects together? A force that one object applies to another object without touching it is a noncontact force. The force that pulls the paper clip is a noncontact force. Another noncontact force, an electrical force, sometimes causes socks to stick together when they are pulled out of the dryer.
What do you think? Read the two statements below and decide whether you agree or disagree with them. Place an A in the Before column if you agree with the statement or a D if you disagree. After you’ve read this lesson, reread the statements to see if you have changed your mind.
Before Statement After
5. To apply a force, one object must be touching another object.
6. If an object is at rest, there are no forces acting on it.
Key Concepts • What are different types
of forces?• What factors affect the force
of gravity?• What happens when forces
combine?• How are balanced and
unbalanced forces related to motion?
Identify the Main Ideas Fold a sheet of paper into three columns. Label them (K ) for what you already know about forces, (W ) for what you want to learn, and (L) for the facts that you learned. Fill in the third column after you have read this lesson.
Key Concept Check 1. Apply What are some examples of contact and noncontact forces you have experienced today?
Motion and Forces
Forces
LESSON 3
CHAPTER 8
Reading Essentials Motion and Forces 137
C360_013_020_RE_L3_889408.indd 13C360_013_020_RE_L3_889408.indd 13 2/15/10 10:16:32 PM2/15/10 10:16:32 PM
Copyrig
ht ©
Glen
coe/M
cGraw
-Hill, a d
ivisio
n o
f The M
cGraw
-Hill C
om
pan
ies, Inc.
Visual Check 3. Predict Look at the objects on the left side of the figure. What would happen to the force of gravity if the mass of the objects in A became as large as the objects in B?
Gravity—A Noncontact ForceWhen you jump off a step, the force of Earth’s gravity pulls
you toward Earth. Did you know that your gravitational force pulls Earth and other objects toward you? Gravity is an attractive force that exists between all objects that have mass.
Mass is the amount of matter in an object. Both you and Earth have mass, so both you and Earth pull on each other. Why doesn’t Earth move toward you?
Earth does move toward you. However, Earth’s mass is much greater than your mass, so it is easier to see the effect of Earth’s force on you than that of your forces on Earth. The size of a gravitational force depends on the masses of the objects and the distance between them.
Gravitational force depends on mass .See the left side of the figure below. It shows that, if the
mass of an object increases, the gravitational force increases between it and another object. The gravitational force between you and Earth is large because of Earth’s large mass. The force holds you on Earth’s surface. The gravitational force between you and your pencil is small because you and the pencil have relatively small masses.
Gravitational force depends on distance.See the right side of the figure below. It shows that the
gravitational force between two objects 1 m apart is four times greater than the gravitational force between the same objects when they are 2 m apart.
1 m1 m
1 m 2 m
Effect of Masson Force of Gravity
Effect of Distanceon Force of Gravity
The distances between the marbles in
diagrams A and B are the same. The
force of attraction between the marbles
in B is greater than in A because the
marbles in B have more mass.
The masses of the marbles in diagrams
C and D are the same. The force of
attraction between the marbles in D
is less than in C because the distance
between the marbles is greater.
A
B
C
D
Effect of Mass and Distance on Force of Gravity
Key Concept Check2. State What factors affect the force of gravity?
138 Motion and Forces Reading Essentials
C360_013_020_RE_L3_889408.indd 14C360_013_020_RE_L3_889408.indd 14 2/15/10 10:16:44 PM2/15/10 10:16:44 PM
Copyri
ght
© G
lenco
e/M
cGra
w-H
ill,
a d
ivis
ion o
f T
he
McG
raw
-Hil
l C
om
pan
ies,
Inc.
Mass and Weight in Different Locations
Location Mass (kg) Weight (N)
Earth 90 900
Moon 90 150
Mass and weight are different.Weight is a measure of the gravitational force acting on an
object’s mass. Therefore, weight depends on the masses of the objects and the distance between them. When comparing the weight of two objects at the same location on Earth, the object with more mass has a greater weight. The weights of the same objects on the Moon are less because the mass of the Moon is less. The relationship between weights and mass on Earth and the Moon is shown in the table above. Because it has less mass, the Moon’s gravity is only 1/6 that of Earth’s. Therefore, an astronaut’s weight on the Moon is 1/6 the astronaut’s weight on Earth.
Friction—A Contact ForceRub your finger across your desk. Then rub it across a
piece of your clothing. What did you feel? It’s easy to run your finger over your desk because it is smooth. On your clothing, you felt a force called friction. Friction is a contact force that resists the sliding motion of two surfaces that are touching. Rough surfaces tend to produce more friction. Smooth surfaces produce less friction.
Effects of FrictionPush your book across your desk. The book stops when
you stop pushing it. The force of friction acts in the opposite direction of the book’s motion. A heavier book is more affected by friction than a lighter one. If you want to move a box of heavy books by sliding the box across the floor, you have to use a large pulling force. The force of friction between the box and the floor acts in the opposite direction to the force of your pull. To move the box, your pulling force must be greater than the friction force.
Air ResistanceWhen you drop a sheet of paper, it slowly drifts downward.
Friction between the air and the paper’s surface slows its motion. Air resistance is the frictional force between air and objects moving through it. When you crumple the paper into a ball, less surface area is in contact with the air. As air resistance decreases, the ball of paper falls more quickly.
Reading Check6. Categorize Is air resistance a contact force or a noncontact force? Explain your answer.
Interpreting Tables 4. Infer What would be the weight of a girl on the Moon if she weighs 600 N on Earth?
5. Apply Which has more friction between them: two pieces of sandpaper or two pieces of plastic?
Reading Essentials Motion and Forces 139
C360_013_020_RE_L3_889408.indd 15C360_013_020_RE_L3_889408.indd 15 2/15/10 10:16:54 PM2/15/10 10:16:54 PM
Copyrig
ht ©
Glen
coe/M
cGraw
-Hill, a d
ivisio
n o
f The M
cGraw
-Hill C
om
pan
ies, Inc.
Combining ForcesSuppose you need to pull your desk away from the wall
to get something that fell behind it. When you pull, the desk will not move, so you ask a friend to help you. With both of you pulling, the desk moves. You each applied a force to the desk, and you applied it in the same direction. The combined force was great enough to move the desk. When more than one force acts on an object, the forces combine and act as one force. The sum of all the forces acting on an object is called the net force. When forces act in the same direction, they add together to form one net force.
Sometimes forces act in opposite directions. Imagine watching a dog pulling on its owner’s leash. The dog applies a force to the left. The owner pulls the leash to the right, applying an opposite force. When two forces act on the same object in opposite directions, you must include the direction of the forces when you add them. The positive direction is usually to the right. The girl’s force on the dog’s leash is +50 N. The dog’s force on the leash is the same size as the girl’s but in the negative direction. The dog’s force is -50 N. The net force on the leash is 50 N + (-50 N) = 0 N. The dog doesn’t move.
Balanced ForcesIf the net force on an object is 0 N, the forces acting on
the object are called balanced forces. Look at the figure below. The net force on the left side of the figure is 0 N. The forces acting on the object are balanced.
Unbalanced Forces When the net force on an object is not 0, the forces
acting on the object are unbalanced forces. The net force on the right side of the figure below is 100 N to the right. The forces acting on the object are unbalanced. Acceleration is in the direction of the larger force.
Visual Check9. Draw an arrow to show the acceleration that would result if the pull force on the right side of the figure was reduced to 150 N while the friction force stayed the same. What would be the net force?
7. Predict what would happen if the dog’s force increased to –60 N while the girl’s force stayed at 50 N. What would be the net force?
Key Concept Check8. Describe What can happen when forces combine?
Combining Forces
Friction = 100 N Pull = 200 N
50 N 50 N Acceleration
Balanced Forces Unbalanced Forces
The forces are balanced. They are equal in size and opposite in direction.
50 N + (-50 N) = 0
The forces act in opposite directions, but they are not balanced.
200 N + (-100 N) = 100 N
140 Motion and Forces Reading Essentials
C360_013_020_RE_L3_889408.indd 16C360_013_020_RE_L3_889408.indd 16 2/15/10 10:16:57 PM2/15/10 10:16:57 PM
Copyri
ght
© G
lenco
e/M
cGra
w-H
ill,
a d
ivis
ion o
f T
he
McG
raw
-Hil
l C
om
pan
ies,
Inc.
Reading Check10. Describe how unbalanced forces affect an object.
Unbalanced Forces and AccelerationWhen you kick a soccer ball, its motion changes. The
forces on the ball are unbalanced. When unbalanced forces act on an object, the object’s velocity changes. Unbalanced forces can change either the speed or the direction of motion.
Change in SpeedLook at the figure below. In the top left image, the train is
pulling away from the station. The force of the engine pulling the train forward is greater than the force of friction holding it back.
The forces on the train are unbalanced, so it accelerates. The train speeds up. The train accelerates in the direction of the larger force, which is the forward pull of the engine.
Change in DirectionWhen the train goes around a curve, as shown in the
bottom left image of the figure, the track exerts a sideways force on the train’s wheels. These unbalanced forces change the train’s motion by changing its direction and its velocity. The train accelerates.
Visual Check11. Analyze What would happen if the friction in the bottom right image was suddenly greater than the force of the engine?
Unbalanced Forces = Acceleration Balanced Forces = Constant Motion
Changing speed
Changing direction Constant velocity
Resting
Friction
from rails
Friction
from rails
Force
of engine
Force
of engine
Force
of engine
Force from
track on wheels
Force of track
Gravity
The Effect of Balanced and Unbalanced Forces
Reading Essentials Motion and Forces 141
C360_013_020_RE_L3_889408.indd 17C360_013_020_RE_L3_889408.indd 17 2/15/10 10:17:05 PM2/15/10 10:17:05 PM
Copyrig
ht ©
Glen
coe/M
cGraw
-Hill, a d
ivisio
n o
f The M
cGraw
-Hill C
om
pan
ies, Inc.
Balanced Forces and Constant Motion How do balanced forces affect an object’s motion? The
forces acting on a train that is sitting still on a track are balanced. The force of gravity pulls the train down toward Earth. The track pushes in an upward direction with an equal force. If the forces were not balanced, the train would sink into the ground or float upward, depending on the direction of the greater force.
When a train moves along a straight track, the force from the engine moves the train forward. The force of friction between the wheels and the track is equal in size to the engine’s force, but in the opposite direction. The forces acting on the train are balanced. The train does not accelerate, but it moves at a constant velocity. When balanced forces act on an object, the motion is constant. The object is either at rest—that is, completely still—or it is moving at a constant velocity.
Forces and Newton’s Laws of MotionIsaac Newton was an English scientist who lived in the
late 1600s. He developed three important rules about motion called Newton’s laws of motion.
Newton’s First Law of MotionAs you just read, when balanced forces act on an object,
the object’s motion is constant. According to Newton’s first law of motion, if the net force acting on an object is zero, the motion of the object does not change. Newton’s first law of motion sometimes is called the law of inertia. Inertia is the tendency of an object to resist a change in its motion.
Newton’s first law explains why safety belts can protect passengers in a car from danger. Engineers who study car crashes often use crash-test dummies as models of car passengers. Because of inertia, crash-test dummies without safety belts keep moving forward after a car crashes into a wall. Before the crash, the car and the test dummies move with a constant velocity. When the car crashes into the wall, unbalanced forces act on the car, and it stops. However, the dummies, which are not attached to the car, continue to move with a constant velocity because of their inertia. They continue to move until an unbalanced force changes their motion. If that unbalanced force does not come from a safety belt, it could come from the windshield.
Reading Check13. Explain What is inertia?
14. Infer Before the crash, why does the car move with a constant velocity?
Key Concept Check12. Contrast How do balanced and unbalanced forces affect motion?
Make a small four-door shutterfold to record what you learn about forces.
ContactForces
BalancedForces
UnbalancedForces
Non-ContactForces
142 Motion and Forces Reading Essentials
C360_013_020_RE_L3_889408.indd 18C360_013_020_RE_L3_889408.indd 18 2/15/10 10:17:16 PM2/15/10 10:17:16 PM
Copyri
ght
© G
lenco
e/M
cGra
w-H
ill,
a d
ivis
ion o
f T
he
McG
raw
-Hil
l C
om
pan
ies,
Inc.
Newton’s Second Law of MotionAs you have read, when an unbalanced force acts on an
object, the object accelerates. Newton’s second law of motion states that acceleration of an object is equal to the net force exerted on the object divided by the object’s mass. This means that the greater the mass, the greater the force must be to accelerate the object at the same rate. Acceleration is in the same direction as net force. You can write Newton’s second law of motion as an equation:
acceleration (a) = force (f )
________ mass (m)
For example, think about a bowler exerting a force by throwing a 4-kg bowling ball. A force of 80 N is needed to cause a mass of 4 kg to accelerate to 20 m/s every second. The greater the force is that the bowler exerts on the ball, the faster the ball will accelerate as long as the mass of the ball remains constant. If the bowler wanted to accelerate a mass of 8 kg at the same rate (to 20 m/s every second), the bowler would need a force of 160 N.
Newton’s Third Law of MotionImagine a runner on a starting block. The runner’s feet
exert a downward force on the block. The block exerts an upward force on the runner’s feet. When the runner pushes on the block to start the race, the block pushes back, helping the runner get a fast start. Newton’s third law of motion says that for every action there is an equal and opposite reaction. In other words, when one object exerts a force on a second object, the second object exerts a force of equal size in the opposite direction on the first object. These equal and opposite forces are called force pairs. The runner’s feet exert a downward force on the starting block, and the starting block exerts an upward force on the runner’s feet. This is the force pair.
Force pairs are not the same as balanced forces. Balanced forces act on the same object. Recall the figure of the train, shown earlier in the lesson. The force from gravity and the force from the train track are balanced and they act on the same object—the train.
Think about Newton’s laws as you move through your day. Together, the laws help you understand why objects move as they do.
Reading Check 15. State What effect does an increase in an object’s mass have on the acceleration of the object if net force remains the same?
Reading Check16. Contrast force pairs and balanced forces.
Reading Essentials Motion and Forces 143
C360_013_020_RE_L3_889408.indd 19C360_013_020_RE_L3_889408.indd 19 2/15/10 10:17:29 PM2/15/10 10:17:29 PM
Copyrig
ht ©
Glen
coe/M
cGraw
-Hill, a d
ivisio
n o
f The M
cGraw
-Hill C
om
pan
ies, Inc.
Mini Glossary
Reread the statements at the beginning of the lesson. Fill in the After column with an A if you agree with the statement or a D if you disagree. Did you change your mind?
What do you think
END OF LESSON
Log on to ConnectED.mcgraw-hill.com and access your textbook to find this lesson’s resources.
ConnectED
air resistance: the frictional force between air and objects
moving through it
contact force: a push or a pull one object applies to another
object that is touching it
force: a push or a pull on an object
friction: a contact force that resists the sliding motion of two
surfaces that are touching
gravity: an attractive force that exists between all objects that
have mass
Newton’s first law of motion: the law that states that if
the net force acting on an object is zero, the motion of the
object does not change
Newton’s second law of motion: the law that states that
acceleration of an object is equal to the net force exerted on the
object divided by the object’s mass
Newton’s third law of motion: the law that states that for
every action there is an equal and opposite reaction
noncontact force: a force that one object applies to another
object without touching it
1. Review the terms and their definitions in the Mini Glossary. Write a sentence that illustrates an example of one of Newton’s laws of motion.
2. Use terms from the lesson to fill in the missing bubbles in the concept map below.
electrical force
Types of Forces
magnetism contact kick
144 Motion and Forces Reading Essentials
C360_013_020_RE_L3_889408.indd 20C360_013_020_RE_L3_889408.indd 20 2/15/10 10:17:33 PM2/15/10 10:17:33 PM