chapter 7 advanced sketching and constraining techniques
TRANSCRIPT
Chapter 7 Advanced Sketching and Constraining Techniques
• After completing this chapter, you will be able to– Use construction geometry to help constrain
sketches– Create and constrain an ellipse– Create a 2D spline– Create a pattern of sketch geometry– Share a sketch– Utilize both the symmetry constraint and mirror tool– Slice the graphics window– Sketch on another parts face– Change the display of dimensions– Create relationships between dimensions– Create parameters– Create a part that is driven from a Microsoft Excel spreadsheet
Chapter 7 - Objectives
Construction Geometry• Construction Geometry
–Reduce the number of constraints and dimensions that are required to fully constrain a sketch
–Example..• circle inside a hexagon can drive the
size of the hexagon
–Can be constrained and dimensioned
–Not seen in the part–Editing–Line style–Color of the image
Ellipses• Ellipses
– Can be trimmed, extended, and dimensioned
– Offset • Concentric ellipse
• Spline profile
• Major or minor axis
2D Splines• 2D Splines
– Create complex shapes
– Free flowing shapes
– Points
– Edited and Controlled
– Spline options
2D Splines• Spline options
– Bowtie• Handle
• Curvature
• Flat
2D Splines• Spline options
– Fit Method• Smooth
• Sweet
• AutoCAD
2D Splines• Spline options
– Insert Point
– Close Spline
– Display Curvature
2D Splines• Spline options
– Spline Tension
– Constrain and Dimension a Spline
Exercise 7-1
• Complex Sketching
Pattern Sketches• Pattern Sketches
–Instead of creating multiple sketches
–Rectangular or Polar
–Occurrences or Elements
–Rectangular & Circular Pattern dialog box
• Suppress
• Associative
• Fitted
–Occurrences or Elements
Shared Sketches• Shared Sketches
– Copy of the original sketch
– Same sketch geometry, dimensions & face
– Same name
– Update
– On limit
Mirror Sketches• Mirror Sketches
–Create a symmetrical part –Symmetry constraint
• Reduce the number of constraints and dimensions
• Changes - updates• Automatically • Manually
– same object type– lie on opposite sides of a line
Slice Graphics• Slice Graphics
– Obscuring the view
– Plane that is difficult to see
– Temporarily slice away
– Working in an assembly
Sketch on another Part’s Face
• Sketch on another Part’s Face– Sketch
• Can be placed on a face or plane of another part
• Not limited to first sketch
• Associated
• Adaptive
Exercise 7-2
• Projecting Edges and Sketching On Another Part’s Face
Dimension Display• Dimensional Relationships
–Set up relationships between dimensions • Dimension Display
–Automatically tagged - label • “d” and a number (d0, d27)
–Five options (Display as..)• Value, Name, Expression • Tolerance • Precise Value
–Change dimension display style
Dimension Relationships• Dimension Relationships
– Setting relationship between creating and existing dimensions
– Edit Dimension dialog box • Dimensions label (d#) • Prefix fx = value based on parameter or other dimension
Dimension Equations•Dimension Equations
–Can be used whenever a value is required
–Example.. • (d9/4)*2, or 50 mm + 19 mm
• prefixes, precedence, operators, functions, syntax, and units
–Help system
–Invalid expression • Red
Parameters• Parameters
–User-defined name assigned a numeric value, either explicitly or through equations
–Multiple parameters• depth = length – width
–Anywhere a value is required–Three types
• model parameters • user parameters • linked parameters
Parameters•Parameters
–Parameters dialog box • Model Parameters
– automatically • Reference
– driven dimension • User Parameters
– manually defined
– Column names• Parameter Name • Units • Equation • Nominal Value • Tol • Model Value • Export Parameters Column • Comment
Linked Parameters• Linked Parameters
– Multiple values & same parameters
– Spreadsheet • Microsoft Excel
Linked Parameters• Linked Parameters
– Spreadsheet Embedded• no link – no updates
– Spreadsheet Linked• will update• more than one can be linked
– Guidelines – Edit
Exercise 7-3
• Auto Dimension, Relationships and Parameters
SummaryTo Do This
Create construction geometry Change the line style to Construction in the Style area on the standard toolbar.
Create splines Click the Spline tool on the 2D Sketch Panel Bar.
Pattern a sketch object Click either the Rectangular Pattern tool or Circular Pattern tool on the 2D Sketch Panel Bar.
Share a sketch Right-click on the sketch name in the Browser and select Share Sketch from the menu.
Mirror a sketch Click the Mirror tool on the 2D Sketch Panel Bar.
Temporarily slice away a portion of the model that obscures the plane
After making a sketch active, right-click and select Slice Graphics from the menu.
Sketch on a plane of another part
Click the 2D Sketch tool on the standard toolbar and click on any planar face or plane of another part.
Create parameters Click the Parameters tool on the Sketch, Part Features, or the Assembly Panel Bars.
Applying Your Skills
• Skill Exercise 7-1