chapter 4 reactions in aqueous solution lecture presentation © 2012 pearson education, inc
TRANSCRIPT
Chapter 4
Reactions in Aqueous Solution
Lecture Presentation
© 2012 Pearson Education, Inc.© 2012 Pearson Education, Inc.
AqueousReactions
© 2012 Pearson Education, Inc.
Solutions
• Solutions are defined as homogeneous mixtures of two or more pure substances.
• The solvent is present in greatest abundance.
• All other substances are solutes.
AqueousReactions
© 2012 Pearson Education, Inc.
Dissociation
• When an ionic substance dissolves in water, the solvent pulls the individual ions from the crystal and solvates them.
• This process is called dissociation.
AqueousReactions
A. H2O(l)
B. K+(aq) and H2O(l)
C. CN-(aq)
D. K+(aq) and CN-(aq)
AqueousReactions
A. H2O(l)
B. Na+(aq) and H2O(l)
C. ClO4-(aq)
D. Na+(aq) and ClO4-(aq)
AqueousReactions
© 2012 Pearson Education, Inc.
Solutions
• An electrolyte is a substances that dissociates into ions when dissolved in water.
AqueousReactions
© 2012 Pearson Education, Inc.
Solutions
• A nonelectrolyte may dissolve in water, but it does not dissociate into ions when it does so.
AqueousReactions
© 2012 Pearson Education, Inc.
Electrolytes and Nonelectrolytes
Soluble ionic compounds tend to be electrolytes.
Molecular compounds tend to be non-electrolytes, except for acids and bases.
AqueousReactionsA. NaCl(aq) B. CH3OH(aq)
AqueousReactions
© 2012 Pearson Education, Inc.
Electrolytes
• A strong electrolyte dissociates completely when dissolved in water.
• A weak electrolyte only dissociates partially when dissolved in water.
AqueousReactions
A. CH3OH(aq)
B. NaOH(aq)
C. CH3COOH(aq)
D. Cannot determine from Figure 4.2
AqueousReactions
© 2012 Pearson Education, Inc.
Strong Electrolytes Are…
• Strong acids• Strong bases• Soluble ionic salts
AqueousReactions
Sample Exercise 4.1 Relating Relative Numbers of Anions and Cations to Chemical Formulas
The accompanying diagram represents an aqueous solution of either MgCl2, KCl, or K2SO4. Which solution does the drawing best represent?
The diagram shows twice as many cations as anions, consistent with the formulation K2SO4.
Practice Exercise
If you were to draw diagrams representing aqueous solutions of (a) NiSO4, (b) Ca(NO3)2, (c) Na3PO4, (d) Al2(SO4)3, how many anions would you show if each diagram contained six cations?
Answer: (a) 6, (b) 12, (c) 2, (d) 9
AqueousReactions
© 2012 Pearson Education, Inc.
Precipitation Reactions
When one mixes ions that form compounds that are insoluble (as could be predicted by the solubility guidelines), a precipitate is formed.
AqueousReactions
A. K+ and I– C. K+ and NO3–
B. Pb2+ and I– D. Pb2+ and NO3–
AqueousReactions
Sample Exercise 4.2 Using Solubility RulesClassify these ionic compounds as soluble or insoluble in water: (a) sodium carbonate, Na2CO3, (b) lead sulfate, PbSO4.
(a) According to Table 4.1, most carbonates are insoluble. But carbonates of the alkali metal cations (such as sodium ion) are an exception to this rule and are soluble. Thus, Na2CO3 is soluble in water.
(b) Table 4.1 indicates that although most sulfates are water soluble, the sulfate of is an exception. Thus, PbSO4 is insoluble in water.
Practice ExerciseClassify the following compounds as soluble or insoluble in water: (a) cobalt II hydroxide, (b) barium nitrate, (c) ammonium phosphate.
Answers: (a) insoluble, (b) soluble, (c) soluble
AqueousReactions
© 2012 Pearson Education, Inc.
Metathesis (Exchange) Reactions
• Metathesis comes from a Greek word that means “to transpose.”
• It appears as though the ions in the reactant compounds exchange, or transpose, ions:
AgNO3(aq) + KCl(aq) AgCl(s) + KNO3(aq)
AqueousReactions
Sample Exercise 4.3 Predicting a Metathesis Reaction(a) Predict the identity of the precipitate that forms when aqueous solutions of BaCl2 and K2SO4 are mixed. (b) Write the balanced chemical equation for the reaction.
(a) The reactants contain Ba2+, Cl–, K+, and SO42– ions. Exchanging the anions gives us BaSO4 and KCl. According to
Table 4.1, most compounds of SO42– are soluble but those of Ba2+ are not. Thus, BaSO4 is insoluble and will precipitate from
solution. KCl is soluble.(b) From part (a) we know the chemical formulas of the products, BaSO4 and KCl. The balanced equation is
BaCl2(aq) + K2SO4(aq) BaSO4(s) + 2 KCl(aq)
Practice Exercise(a) What compound precipitates when aqueous solutions of Fe2(SO4)3 and LiOH are mixed? (b) Write a balanced equation for the reaction. (c) Will a precipitate form when solutions of Ba(NO3)2 and KOH are mixed?
Answer: (a) Fe(OH)3, (b) Fe2(SO4)3(aq) + 6 LiOH(aq) 2 Fe(OH)3(s) + 3 Li2SO4(aq), (c) no (both possible products, Ba(OH)2 and KNO3, are water soluble)
AqueousReactions
© 2012 Pearson Education, Inc.
Solution Chemistry
• It is helpful to pay attention to exactly what species are present in a reaction mixture (i.e., solid, liquid, gas, aqueous solution).
• If we are to understand reactivity, we must be aware of just what is changing during the course of a reaction.
AqueousReactions
© 2012 Pearson Education, Inc.
Molecular Equation
The molecular equation lists the reactants and products in their molecular form:
AgNO3(aq) + KCl(aq) AgCl(s) + KNO3(aq)
AqueousReactions
© 2012 Pearson Education, Inc.
Ionic Equation• In the ionic equation all strong electrolytes (strong acids, strong bases, and
soluble ionic salts) are dissociated into their ions.
• This more accurately reflects the species that are found in the reaction mixture:
Ag+(aq) + NO3−(aq) + K+(aq) + Cl−(aq)
AgCl(s) + K+(aq) + NO3−(aq)
• To form the net ionic equation, cross out anything that does not change from the left side of the equation to the right.
• The only things left in the equation are those things that change (i.e., react) during the course of the reaction.
• Those things that didn’t change (and were deleted from the net ionic equation) are called spectator ions:
Ag+(aq) + Cl−(aq) AgCl(s)
AqueousReactions
© 2012 Pearson Education, Inc.
Writing Net Ionic Equations
1. Write a balanced molecular equation.
2. Dissociate all strong electrolytes.
3. Cross out anything that remains unchanged from the left side to the right side of the equation.
4. Write the net ionic equation with the species that remain.
AqueousReactions
A. Ag+(aq) and Cl-(aq)
B. NO3-(aq) and Cl-(aq)
C. Na+(aq) and NO3-(aq)
D. No spectator ions are involved
AqueousReactions
CaCl2(aq) + Na2CO3(aq) CaCO3(s) + 2 NaCl(aq)
Ca2+(aq) + 2 Cl–(aq) + 2 Na+(aq) + CO32–(aq) CaCO3(s) + 2 Na+(aq) + 2 Cl–(aq)
Ca2+(aq) + CO32–(aq) CaCO3(s)
Sample Exercise 4.4 Writing a Net Ionic EquationWrite the net ionic equation for the precipitation reaction that occurs when aqueous solutions of calcium chloride and sodium carbonate are mixed.
Practice Exercise
Write the net ionic equation for the precipitation reaction that occurs when aqueous solutions of silver nitrate and potassium phosphate are mixed.
Answer: 3 Ag+(aq) + PO43–(aq) Ag3PO4(s)
AqueousReactions
© 2012 Pearson Education, Inc.
Acids
• The Swedish physicist and chemist S. A. Arrhenius defined acids as substances that increase the concentration of H+ when dissolved in water.
• Both the Danish chemist J. N. Brønsted and the British chemist T. M. Lowry defined them as proton donors.
There are only seven strong acids:• Hydrochloric (HCl)• Hydrobromic (HBr)• Hydroiodic (HI)
• Nitric (HNO3)
• Sulfuric (H2SO4)
• Chloric (HClO3)
• Perchloric (HClO4)
AqueousReactions
A. 0 B. 1 C. 2 D. 3 E. 4
AqueousReactions
© 2012 Pearson Education, Inc.
Bases
• Arrhenius defined bases as substances that increase the concentration of OH− when dissolved in water.
• Brønsted and Lowry defined them as proton acceptors.
The strong bases are the soluble metal salts of hydroxide ion:
• Alkali metals
• Calcium
• Strontium
• Barium
AqueousReactions
© 2012 Pearson Education, Inc.
Acid-Base Reactions
In an acid–base reaction, the acid donates a proton (H+) to the base.
AqueousReactions
A. Al(OH)3 is not basic in water.
B. Al(OH)3 is insoluble in water.
C. Al(OH)3 is a strong acid in water, not basic.
D. Al(OH)3 is a weak acid in water, not basic.
AqueousReactions
Sample Exercise 4.5 Comparing Acid StrengthsThe following diagrams represent aqueous solutions of acids HX, HY, and HZ, with water molecules omitted for clarity. Rank the acids from strongest to weakest.
The order is HY > HZ > HX. HY is a strong acid because it is totally ionized (no HY molecules in solution), whereas both HX and HZ are weak acids, whose solutions consist of a mixture of molecules and ions. Because HZ contains more ions and fewer molecules than HX, it is a stronger acid.
Imagine a diagram showing 10 Na+ ions and 10 OH– ions. If this solution were mixed with the one pictured above for HY, what species would be present in a diagram that represents the combined solutions after any possible reaction?
Answer: The diagram would show 10 Na+ ions, 2 OH– ions, 8 Y– ions, and 8 H2O molecules.
Practice Exercise
AqueousReactions
Sample Exercise 4.6 Identifying Strong, Weak, and Nonelectrolytes
Ionic compounds: CaCl2 and KOH all ionic compounds are strong electrolytes.Molecular compounds: HNO3, HCOOH, and C2H5OH. Nitric acid, HNO3, is a common strong acid, and therefore is a strong electrolyte. Formic acid HCOOH is a weak acid, and therefor a weak electrolyte. Ethanol, C2H5OH, is neither an acid nor a base, so it is a nonelectrolyte.
Classify these dissolved substances as strong, weak, or nonelectrolyte: CaCl2, HNO3, C2H5OH (ethanol), HCOOH (formic acid), KOH.
Practice Exercise
Consider solutions in which 0.1 mol of each of the following compounds is dissolved in 1 L of water: Ca(NO3)2 (calcium nitrate), C6H12O6 (glucose), NaCH3COO (sodium acetate), and CH3COOH (acetic acid).Rank the solutions in order of increasing electrical conductivity, based on the fact that the greater the number of ions in solution, the greater the conductivity.
Answer: C6H12O6 (nonelectrolyte) < CH3COOH (weak electrolyte, existing mainly in the form of molecules with few ions) < NaCH3COO (strong electrolyte that provides two ions, Na+ and CH3COO–) < Ca(NO3)2 (strong electrolyte that provides three ions, Ca2+ and 2 NO3
–)
AqueousReactions
© 2012 Pearson Education, Inc.
Neutralization Reactions
Generally, when solutions of an acid and a base are combined, the products are a salt and water:
CH3COOH(aq) + NaOH(aq) CH3COONa(aq) + H2O(l)
AqueousReactions
© 2012 Pearson Education, Inc.
Neutralization Reactions
When a strong acid reacts with a strong base, the net ionic equation is
HCl(aq) + NaOH(aq) NaCl(aq) + H2O(l)
H+(aq) + Cl−(aq) + Na+(aq) + OH−(aq)
Na+(aq) + Cl−(aq) + H2O(l)
H+(aq) + OH−(aq) H2O(l)
AqueousReactions
A. Insufficient chloride ions are added to react with all of the solid magnesium hydroxide.B. Insufficient hydrogen ions are added to react with all of the solid magnesium hydroxide.C. Magnesium hydroxide reacts only slowly with hydrochloric acid.D. A neutralization reaction does not occur.
AqueousReactions
Sample Exercise 4.7 Writing Chemical Equations for a Neutralization Reaction
For the reaction between aqueous solutions of acetic acid (CH3COOH) and barium hydroxide, Ba(OH)2, write (a) the balanced molecular equation, (b) the complete ionic equation, (c) the net ionic equation.
(a) The salt contains the cation of the base (Ba2+) and the anion of the acid (CH3COO–). Thus, the salt formula is Ba(CH3COO)2. According to Table 4.1, this compound is soluble in water. The unbalanced molecular equation for the neutralization reaction is
CH3COOH (aq) + Ba(OH)2 (aq) H2O (l) + Ba(CH3COO)2 (aq)
2 CH3COOH (aq) + Ba(OH)2 (aq) 2 H2O (l) + Ba(CH3COO)2 (aq)
2 CH3COOH (aq) + Ba2+(aq) + 2 OH- (aq) 2 H2O (l) + Ba2+ + 2 CH3COO- (aq)
2 CH3COOH (aq) + 2 OH- (aq) 2 H2O (l) + 2 CH3COO- (aq)
CH3COOH (aq) + OH- (aq) H2O (l) + CH3COO- (aq)
AqueousReactions
Sample Exercise 4.7 Writing Chemical Equations for a Neutralization Reaction
Continued
For the reaction of phosphorous acid (H3PO3) and potassium hydroxide (KOH), write (a) the balanced molecular equation and (b) the net ionic equation.
Answer: (a) H3PO3(aq) + 3 KOH(aq) 3 H2O(l) + K3PO3(aq),(b) H3PO3(aq) + 3 OH–(aq) 3 H2O(l) + PO3
3–(aq). (H3PO3 is a weak acid and therefore a weak electrolyte, whereas KOH, a strong base, and K3PO3, an ionic compound, are strong electrolytes.)
Practice Exercise
AqueousReactions
© 2012 Pearson Education, Inc.
Gas-Forming Reactions• Some metathesis reactions do not give the product expected.
• In this reaction, the expected product (H2CO3) decomposes to give a gaseous product (CO2):
• When a carbonate or bicarbonate reacts with an acid, the products are a salt, carbon dioxide, and water:
CaCO3(s) + HCl(aq) CaCl2(aq) + CO2(g) + H2O(l)
NaHCO3(aq) + HBr(aq) NaBr(aq) + CO2(g) + H2O(l)
AqueousReactions
© 2012 Pearson Education, Inc.
Gas-Forming Reactions• Similarly, when a sulfite reacts with an acid, the products are a
salt, sulfur dioxide, and water:
• This reaction gives the predicted product, but you had better carry it out in the hood, or you will be very unpopular!
• Just as in the previous examples, a gas is formed as a product of this reaction:
SrSO3(s) + 2HI(aq) SrI2(aq) + SO2(g) + H2O(l)
Na2S(aq) + H2SO4(aq) Na2SO4(aq) + H2S(g)
AqueousReactions
A. SO2(g)
B. H2(g)
C. CO2(g)
D. H2S(g)
AqueousReactions
© 2012 Pearson Education, Inc.
Oxidation-Reduction Reactions
• An oxidation occurs when an atom or ion loses electrons.• A reduction occurs when an atom or ion gains electrons.• One cannot occur without the other.
AqueousReactions
© 2012 Pearson Education, Inc.
Oxidation Numbers• To determine if an oxidation–reduction reaction has
occurred, we assign an oxidation number to each element in a neutral compound or charged entity.
• Elements in their elemental form have an oxidation number of 0.
• The oxidation number of a monatomic ion is the same as its charge.
AqueousReactions
© 2012 Pearson Education, Inc.
Oxidation Numbers• Nonmetals tend to have negative oxidation numbers,
although some are positive in certain compounds or ions.– Oxygen has an oxidation number of −2, except in
the peroxide ion, in which it has an oxidation number of −1.
– Hydrogen is −1 when bonded to a metal, +1 when bonded to a nonmetal.
– Fluorine always has an oxidation number of −1.– The other halogens have an oxidation number of
−1 when they are negative; they can have positive oxidation numbers, however, most notably in oxyanions.
AqueousReactions
© 2012 Pearson Education, Inc.
Oxidation Numbers
• The sum of the oxidation numbers in a neutral compound is 0.
• The sum of the oxidation numbers in a polyatomic ion is the charge on the ion.
AqueousReactions
Sample Exercise 4.8 Determining Oxidation NumbersDetermine the oxidation number of sulfur in (a) H2S, (b) S8, (c) SCl2, (d) Na2SO3, (e) SO4
2–.
(a) hydrogen is+1 (rule 3b). H2S is neutral. (rule 4). Letting x equal the oxidation number of S, we have 2(+1) + x = 0. Thus, S has an oxidation number of –2.(b) Because this is an elemental form of sulfur, the oxidation number of S is 0 (rule 1).(c) Chlorine is –1 (rule 3c). SCl2 is neutral (rule 4). Letting x equal the oxidation number of S, we have x + 2(–1) = 0. Consequently, the oxidation number of S must be +2.(d) Sodium is +1 (rule 2). Oxygen is –2 (rule 3a). Letting x equal the oxidation number of S, we have 2(+1) + x + 3(–2) = 0. Therefore, the oxidation number of S in this compound is +4.(eO is –2 (rule 3a) the net charge of the SO4
2– ion is -2 (rule 4). Thus, we have x + 4(–2) = –2. From this relation we conclude that the oxidation number of S in this ion is +6.
Practice Exercise
What is the oxidation state of the boldfaced element in (a) P2O5, (b) NaH, (c) Cr2O72–, (d) SnBr4,
(e) BaO2?
Answer: (a) +5, (b) –1, (c) +6, (d) +4, (e) –1
AqueousReactions
A. +1
B. -1
C. -2
D. -3
AqueousReactions
A. +6
B. +5
C. +4
D. -1
AqueousReactions
© 2012 Pearson Education, Inc.
Displacement Reactions
• In displacement reactions, ions oxidize an element.• The ions, then, are reduced.
AqueousReactions
Sample Exercise 4.9 Writing Equations for Oxidation-ReductionReactions
Write the balanced molecular and net ionic equations for the reaction of aluminum with hydrobromic acid.The reactants are Al and HBr. The cation formed by Al is Al3+, and the anion from hydrobromic acid is Br–. Thus, the salt formed in the reaction is AlBr3.Writing the reactants and products and then balancing the equation gives the molecular equation:
2 Al(s) + 6 HBr(aq) 2 AlBr3(aq) + 3 H2(g)
Both HBr and AlBr3 are soluble strong electrolytes. Thus, the complete ionic equation is2 Al(s) + 6 H+(aq) + 6 Br–(aq) 2 Al3+(aq) + 6 Br–(aq) + 3 H2(g)
Because Br– is a spectator ion, the net ionic equation is2 Al(s) + 6 H+(aq) 2 Al3+(aq) + 3 H2(g)
Practice Exercise
(a) Write the balanced molecular and net ionic equations for the reaction between magnesium and cobalt(II) sulfate. (b) What is oxidized and what is reduced in the reaction?
Answer: (a) Mg(s) + CoSO4(aq) MgSO4(aq) + Co(s) Mg(s) + Co2+(aq) Mg2+(aq) + Co(s), (b) Mg is oxidized and Co2+ is reduced.
AqueousReactions
Al + H+ Al3+ + H2
When the oxidation-reduction reaction above is correctly balanced, the coefficients are
a. 1, 2 1, 1.
b. 1, 3 1, 2.
c. 2, 3 2, 3.
d. 2, 6 2, 3.
AqueousReactions
© 2012 Pearson Education, Inc.
Displacement Reactions
In this reaction,
silver ions oxidize
copper metal:
Cu(s) + 2Ag+(aq) Cu2+(aq) + 2Ag(s)
The reverse reaction
however, does not
occur:
Cu2+(aq) + 2Ag(s) Cu(s) + 2Ag+(aq) x
AqueousReactions
© 2012 Pearson Education, Inc.
Activity Series
AqueousReactions
Sample Exercise 4.10 Determining When an Oxidation-Reduction Reaction Can Occur
Will an aqueous solution of iron(II) chloride oxidize magnesium metal? If so, write the balanced molecular and net ionic equations for the reaction.
Because Mg is above Fe in the table, the reaction occurs.
Mg(s) + FeCl2(aq) MgCl2(aq) + Fe(s)
The net ionic equation is
Mg(s) + Fe2+(aq) Mg2+(aq) + Fe(s)
Practice Exercise
Which of the following metals will be oxidized by Pb(NO3)2: Zn, Cu, Fe?
Answer: Zn and Fe
AqueousReactions
A. Yes
B. No
?
AqueousReactions
A. Yes
B. No
AqueousReactions
© 2012 Pearson Education, Inc.
Molarity
• Two solutions can contain the same compounds but be quite different because the proportions of those compounds are different.
• Molarity is one way to measure the concentration of a solution:
moles of solute
volume of solution in litersMolarity (M) =
AqueousReactions
© 2012 Pearson Education, Inc.
Mixing a Solution
• To create a solution of a known molarity, one weighs out a known mass (and, therefore, number of moles) of the solute.
• The solute is added to a volumetric flask, and solvent is added to the line on the neck of the flask.
AqueousReactions
A. 21.0 g of NaF dissolved in water to make 500 mL of solution
B. 10.5 g of NaF dissolved in water to make 100 mL of solution
AqueousReactions
Sample Exercise 4.11 Calculating MolarityCalculate the molarity of a solution made by dissolving 23.4 g of sodium sulfate (Na2SO4) in enough water to form 125 mL of solution.
The number of moles of Na2SO4 is obtained by using its molar mass:
Converting the volume of the solution to liters:
Thus, the molarity is
Practice Exercise
Calculate the molarity of a solution made by dissolving 5.00 g of glucose (C6H12O6) in sufficient water to form exactly 100 mL of solution.
Answer: 0.278 M
AqueousReactions
Sample Exercise 4.12 Calculating Molar Concentrations of Ions
Calcium nitrate is composed of calcium ions (Ca2+) and nitrate ions (NO3–), so its chemical formula is
Ca(NO3)2. Because there are two NO3– ions for each Ca2+ ion, each mole of Ca(NO3)2 that dissolves
dissociates into 1 mol of Ca2+ and 2 mol of NO3–. Thus, a solution that is 0.025 M in Ca(NO3)2 is 0.025 M in
Ca2+ and 2 0.025 M = 0.050 M in NO3–:
What is the molar concentration of each ion present in a 0.025 M aqueous solution of calcium nitrate?
What is the molar concentration of K+ ions in a 0.015 M solution of potassium carbonate?
Answer: 0.030 M
Practice Exercise
AqueousReactions
How many grams of Na2SO4 are required to make 0.350 L of 0.500 M Na2SO4?
Sample Exercise 4.13 Using Molarity to Calculate Grams of Solute
Calculating the moles of Na2SO4 using the molarity and volume of solution gives
Because each mole of Na2SO4 has a mass of 142 g, the required number of grams of Na2SO4 is
Practice Exercise
(a) How many grams of Na2SO4 are there in 15 mL of 0.50 M Na2SO4? (b) How many milliliters of 0.50 M Na2SO4 solution are needed to provide 0.038 mol of this salt?
Answer: (a) 1.1 g, (b) 76 mL
AqueousReactions
© 2012 Pearson Education, Inc.
Dilution• One can also dilute a more concentrated
solution by– Using a pipet to deliver a volume of the solution to a new volumetric flask, and– Adding solvent to the line on the neck of the new flask.
• The molarity of the new solution can be determined from the equation
Mc Vc = Md Vd,
where Mc and Md are the molarity of the concentrated and dilute solutions, respectively, and Vc and Vd are the volumes of the two solutions.
AqueousReactions
A. Concentration (molarity) remains the same.
B. The new concentration is 0.25 M.
C. The new concentration is 1.00 M.
D. The new concentration is 2.50 M.
AqueousReactions
Sample Exercise 4.14 Preparing a Solution by DilutionHow many milliliters of 3.0 M H2SO4 are needed to make 450 mL of 0.10 M H2SO4?
Calculating the moles of H2SO4 in the dilute solution:
Calculating the volume of the concentrated solution that contains 0.045 mol H2SO4:
Converting liters to milliliters gives 15 mL. We get the same result using M1V1 = M2V2
Practice Exercise
(a) What volume of 2.50 M lead(II) nitrate solution contains 0.0500 mol of Pb2+? (b) How many milliliters of 5.0 M K2Cr2O7 solution must be diluted to prepare 250 mL of 0.10 M solution? (c) If 10.0 mL of a 10.0 M stock solution of NaOH is diluted to 250 mL, what is the concentration of the resulting stock solution?Answer: (a) 0.0200 L = 20.0 mL, (b) 5.0 mL, (c) 0.40 M
AqueousReactions
© 2012 Pearson Education, Inc.
Using Molarities inStoichiometric Calculations
AqueousReactions
How many grams of Ca(OH)2 are needed to neutralize 25.0 mL of 0.100 M HNO3?
Sample Exercise 4.15 Using Mass Relations in a Neutralization Reaction
The product of the molar concentration of a solution and its volume in liters gives the number of moles of solute:
Because this is a neutralization reaction, HNO3 and Ca(OH)2 react to form H2O and the salt containing Ca2+ and NO3
–:
Thus, 2 mol HNO3 ≈ mol Ca(OH)2. Therefore,
Practice Exercise
(a) How many grams of NaOH are needed to neutralize 20.0 mL of 0.150 M H2SO4 solution? (b) How many liters of 0.500 M HCl(aq) are needed to react completely with 0.100 mol of Pb(NO3)2(aq), forming a precipitate of PbCl2(s)?
Answer: (a) 0.240 g, (b) 0.400 L
AqueousReactions
A. Increase by one-half the volume used for titration with NaOH.B. Increase by two the volume used for titration with NaOH.C. Decrease by two the volume used for titration with NaOH.D. Decrease by one-half the volume used for titration with NaOH.
AqueousReactions
© 2012 Pearson Education, Inc.
Titration
Titration is an analytical technique in which one can calculate the concentration of a solute in a solution.
AqueousReactions
Sample Exercise 4.16 Determining Solution Concentration by an Acid–Base Titration
One commercial method used to peel potatoes is to soak them in a NaOH solution for a short time, then remove them and spray off the peel. The NaOH concentration is normally 3 to 6 M, and the solution must be analyzed periodically. In one such analysis, 45.7 mL of 0.500 M H2SO4 is required to neutralize 20.0 mL of NaOH solution. What is the concentration of the NaOH solution?The number of moles of H2SO4 is the product of the volume and molarity of this solution:
Acids react with metal hydroxides to form water and a salt. Thus, the balanced equation for the neutralization reaction is
According to the balanced equation, 1 mol H2SO4 ≈ 2 mol NaOH. Therefore,
Knowing the number of moles of NaOH in 20.0 mL of solution allows us to calculate the molarity of this solution:
AqueousReactions
Sample Exercise 4.16 Determining Solution Concentration by an Acid–Base Titration
Continued
What is the molarity of an NaOH solution if 48.0 mL neutralizes 35.0 mL of 0.144 M H2SO4?
Answer: 0.210 M
Practice Exercise
AqueousReactions
Sample Exercise 4.17 Determining the Quantity of Solute by TitrationThe quantity of Cl– in a municipal water supply is determined by titrating the sample with Ag+. The precipitation reaction taking place during the titration is
Ag+(aq) + Cl–(aq) AgCl(s)The end point in this type of titration is marked by a change in color of a special type of indicator. (a) How many grams of chloride ion are in a sample of the water if 20.2 mL of 0.100 M Ag+ is needed to react with all the chloride in the sample? (b) If the sample has a mass of 10.0 g, what percent Cl– does it contain?
From the balanced equation we see that 1 mol Ag+ ≈ 1 mol Cl-. Using this information and the molar mass of Cl, we have
(b)
(a)
AqueousReactions
Sample Exercise 4.17 Determining the Quantity of Solute by TitrationContinued
A sample of an iron ore is dissolved in acid, and the iron is converted to Fe2+. The sample is then titrated with 47.20 mL of 0.02240 M MnO4
– solution. The oxidation-reduction reaction that occurs during titration is
MnO4–(aq) + 5 Fe2+(aq) + 8 H+(aq) Mn2+(aq) + 5 Fe3+(aq) + 4 H2O(l)
(a) How many moles of MnO4– were added to the solution? (b) How many moles of Fe2+ were in
the sample? (c) How many grams of iron were in the sample? (d) If the sample had a mass of 0.8890 g, what is the percentage of iron in the sample?
Answer: (a) 1.057 10–3 mol MnO4–, (b) 5.286 10–3 mol Fe2+, (c) 0.2952 g, (d) 33.21%
Practice Exercise